Used Feed Flange for sale (12,916)

Condition: used, Technical details: tube diameter: siehe o mm wall strength: siehe o mm voltage: 230 V / 1Phase V total power requirement: 0,55 kW machine weight approx.: 56 kg dimensions L x W x H: 0,45 x 0,37 x 0,35 m Hjdpfxsu Icu Ss Ap Honn HYDRAULIC LINE PRESETTING DEVICE for EO pipes Application for crimping flared fittings on hydraulic lines. Crimping of common raw materials such as steel (ST 35.4 NBK and-or ST 37.4 NBK and-or ST 52.4 NBK), stainless steel (1.4571/1.4541/316Ti or similar) and copper pressure-controlled There is a flaring tool for the size Ø 14mm on the machine. The operating pressure is variably adjustable. *

Year of construction: 2005, condition: used, Technical details: Hnsdpfx Apeyzhnlo Hjn lifting capacity in kg: 230 kg

Condition: used, Technical details: plate width: 400 mm max. stroke: 600 mm control: extern weight of the machine ca.: 0,4 t dimensions L x W x H: 2.7 x 0,8 x 0,62 m Hydraulic sheet feeder, belt feeder Hnsdsu Iczfepfx Ap Hen External control in combination with processing machine. -Insertion length approx. 800mm -Infeed height approx. 500mm -Motorized/hydraulic operation On sale as described. *

Condition: used, Year of construction: 1992, 2 KKSB submersible waste water pumps Both pumps = 7.5 kW Weight 164 kg Hnodpfx Apou N E Hte Hon *

Condition: used, Year of construction: 1986, Technical details: sheet width: 650 mm coil weight: ca. 2 t Hnsdpfou Icguex Ap Hen coil internal diameter: 350 - 570 mm electrics - voltage/frequency: 380/50 V/Hz total power requirement: ca. 1,5 kW weight of the machine ca.: 2,0 t space requirements approx. LxWxH: 1,8 x 3,0 x 1,9 m Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/min - Sizes of feeder: W: 1,30 x D:0,90 x H:1,90m Machine can be demonstrated under power. i.D. *

Condition: used, Technical details: Roll lenght: 1200 mm roll diameter: 95 mm total power requirement: 1,5 kW weight of the machine ca.: 2,0 t dimensions L x W x H: 4,3x1,5x0,45 m Hnsdpfju Nkv Tsx Ap Hsn 2 roller conveyor available - construction type: stable angle iron construction - rolls are driven via motor (380V; 2,15A mit 1400 U/min) - rolls are adjustable - conveyor belt size: 4100x1200mm *

Condition: new, Sheet thickness max.*: 2.5 mm Working speed: 5 1/min shaft length: 250 mm Hedpfxopxl U To Ap Hsnn shaft diameter: 65 mm motor power: 1,5 kW Connection: 400 V Weight, approx.: 400 kg * Material strength 400 N/mm2 without stop Features: - Extended application range due to 8 different pairs of rollers available as an option - Upper shaft with quick adjustment and stable clamping - Axially movable stop plate for high repeat accuracy - Operation via foot pedal, thus both hands free to hold the workpiece - Powerful drive motor for processing sheets up to 2.5 mm steel plate - High accuracy due to precision bearing mounted shafts - For economical production of a wide range of beading types Scope of delivery: - Beading rollers -Mobile foot pedal control panel - workpiece stop - roller wrench

Condition: new, Made in Italy Machine according to DIN 8606 Center height: 260 mm turning diameter over bed: 520 mm turning diameter over slide: 300 mm center width: 1.500 mm bed width: 400 mm spindle bore: 82 mm spindle nose: Camlock 8" Spindle speeds: (24) 9 - 1600 rpm (option 11 - 2000 rpm) motor power: 5,5 kW (option: 7,5 kW) feed Z-axis: (93) 0,028 - 6,43 mm/rev feed X-axis: (93) 0,012 - 2,73 mm/rev Thread, metric: (54) 0.5 - 224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, modular: (54) 0.5 - 112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P. Cross slide LxW: 650 x 230 mm cross slide stroke: 340 mm top slide LxW: 350 x 150 mm top slide stroke: 150 mm Tailstock spindle diameter: 85 mm tailstock quill stroke: 200 mm Tailstock taper: MK 5 Weight: approx. 3,100 kg Equipment: - Tailstock movement pneumatically supported - Acceptance certificate according to DIN 8605, lathe with increased accuracy Hjdpedvm Eujfx Ap Hjnn - Mechanical double clutch - Electromagnetic brake - Rapid traverse for X- and Z-axis - Electrical equipment from high quality brand components e.g. Siemens/Schneider - Lubrication of the guideways via hand pump - Reducing sleeve - 2 fixed center punches - All safety devices according to CE standards: Rotary chuck guard with plexiglass disc, micro limit switch secured. Rotating chuck guard with Plexiglas disc. Rear splash guard along the entire length. Lead screw and pull screw protection by light barrier (integrated in emergency stop circuit). Emergency stop pushbutton. - Swarf container on wheels - Electric coolant device - fixed steady rest - travelling steady rest - operating tool, acceptance protocol according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to CE standard in the latest version

Condition: used, significantly increased accessories and three flanges for the SCHAUDT cylindrical grinding machine. Hodpfxjy Ul Nys Ap Henn

Condition: like new (used), Chain feed table, used for feeding and linear transportation of roll goods or log goods. Forward/reverse run (reversing circuit) integrated, end positions are queried via roller limit switches. Feeding length: 2200mm Feeding height: 950mm (adjustable) Hjdpfx Aetw Sm Njp Hjnn Drive power: 0.18kW (Getriebebau Nord) Condition: slight paint wear, otherwise as good as new

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Hedpfx Aemqty Uep Hsnn For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Hedpfx Apjmqty Ro Hjnn For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Hnjdjmqtzcspfx Ap Hon Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: refurbished (used), Year of construction: 2026, (3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC photos of the last finished machine, for reference only complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-feed grinding and still customizable according to customer needs. Machine refurbished, grinding test in our warehouse is possible, CE certification, manuals, 12 months warranty also available Machines can be inspected in our warehouse in Gussago BS Google Map HERE INFO? . Machine Tools - Machine Tools Gussago (BS) - Italy Tel:  Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the workpiece to work which is given to them with the aid of a tool. Through-feed grinding or also through grinding and longitudinal grinding: parts to be machined proceed uninterruptedly with axial advancement through the grinding gap. Grinding wheel width: 500 Grinding wheel diameter: 610 Hsdpfsgmf Rnsx Ap Henn CNC: 5 axis (new)

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting unit / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The system was used for feeding electrical connector pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed belt conveys the pins as required into the bowl feeder. From the bowl feeder, the product is transferred via the linear feeder to the product inverter. The product inverter orients the product into the correct position and makes it available for further processing. The unit comes from a prototype system; the external electrical control unit is not present and should be replaced by a PLC. Without modification, for example, suitable for the automatic and properly oriented feeding of threaded pins up to M4 x 40. The unit consists of the following components: 1 piece belt hopper / feed conveyor DEPRAG Type: B 10 Serial no.: 1178201 Order no.: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 V (DC) - Belt surface dimpled - Foldable stainless steel chute Weight 11 kg Hnjdpfekpwuuex Ap Hjn 1 piece bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter (top): 200 mm Bowl diameter (bottom): 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Serial no: 35 pieces linear feeder KENDRION Type: WS3B/36 Part no: WSB003,564025 Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the linear feeder Type: SZG Controller 6 Serial no: 35 pieces product inverter FESTO with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR base module type MVP12 - Complete unit mounted on a steel plate with 4 support legs Space requirements (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: used, Double-acting hydraulic cylinder, MAE, suitable for MAE hydraulic press, type HY-DSF 160. Flange cylinder, ideal for workshop press. Machine year of manufacture: 1970 Cylinder No.: 6017 Cylinder stroke: approx. 600 mm Hjdpfx Apoy Tptae Honn Operating pressure: 320 bar Piston rod: Ø 220 mm Piston diameter: Ø 250 mm Cylinder pressing force at 325 bar: approx. 160 tons Cylinder diameter: 255 / 370 / 390 mm Overall length with piston rod retracted: approx. 1350 mm Piston rod extension: 70 mm - Hydraulic connection thread G 1 1/2" - Flange connection on the cylinder base, inner diameter approx. 118 mm, outer diameter 165 mm, 6x M36 threaded holes, pitch circle 215 mm - Thread in the piston rod M20, pitch circle 160 mm - Mounting nut on the cylinder tube, outer diameter 418 mm Weight: 915 kg The hydraulic cylinder is used and comes from a warehouse clearance.

Condition: ready for operation (used), Year of construction: 2006, Prinzing beading machine Type SME 200/11 year of construction 2006 throat 1100 mm connected load 5,5KW max. sheet thickness 1.5 mm VA Siemens Siematic OP7 control Special equipment: -parallel top roller feed with bearing-mounted work rollers -stepless drive motor -motorised top roller feed, infinitely adjustable sensor-controlled feed for automatic operation Table-top version of sheet guide device Total weight 6700 kg The offer is only addressed to dealers in accordance with § 14 of the BGB (German Civil Code). Hnodpfx Apeh Hgdrs Hon No Sales to private persons

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: Hedpfey Ti E Nsx Ap Henn System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: new, For sale: high-quality industrial heating element (heizstab) by HTT energy GmbH. Condition: New, unused, stored in warehouse (may have minimal storage marks). 🔧 Technical specifications: Manufacturer: HTT energy GmbH Hnjdpfoyx I Rzox Ap Hen Article number: 20178 Order number: 7122-001 Power: 50 kW Voltage: 400V (3-phase), 50-60 Hz Current: 72.2 A Protection rating: IP65 Max pressure: 10 bar Temperature range: 5 - 350°C Year of production: 2021 📏 Construction: flange heater multi-tube design junction box with terminals 💡 Application: heating water, oil, and other liquids industrial tanks technology installations heating systems 📦 Included: Exactly what is shown in the photos

Condition: excellent (used), ///// PRICE LISTED PER 1 PIECE ///// Manufacturer: ALGRA Type / markings: D3A030012/0 21-451-003 D3A030011/6-3 23-1151-012 I am offering ALGRA drive gearboxes used in metalworking machines. These components serve the function of power transmission and feed rate adjustment, most commonly used in: - conventional milling machines - machining centers - industrial machines as drive modules Hnedpfxeyz A U Hs Ap Hen Robust, heavy-duty construction – typical components for continuous industrial operation. ⚙️ Technical condition Condition: used Show normal signs of use Mechanically complete Knobs and mechanisms operate correctly Possible storage marks 📦 Included ALGRA gearbox (exactly as shown in the photos) 📏 Application - feed drive for X/Y/Z axes - machine tool gear systems - spare parts for milling machines and industrial equipment - maintenance / machine servicing ℹ️ Additional information Markings stamped on the housings (visible in the photos) Inspection plates "QS-IN PRÜFUNG" Oil-filled design (sealed gearbox) Possibility to sell individually 🚚 Shipping Shipping via courier or on pallet Personal collection possible

Condition: excellent (used), CATALOG NUMBER: 7949 Technical data: - Track width: 380 mm - Shaft width: 420 mm - Max saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max cutting height: 120 mm - Table width with clearance: 1060 mm - Table length: 2050 mm – Top section: - Pawl/anti-kickback row - Metal pressure roller - Kickback fingers - 2 metal feed rollers - Hold-down clamp - Saw shaft - 3 metal pressure feed rollers – Bottom section: - Guide - Kickback fingers - Track - Stepless feed speed adjustment - Feed motor: 1.5 kW - Main motor: 30 kW - Centralized track lubrication - Extraction outlet diameter: 250 mm - Roller tables: 2 pcs 1st table length: 3500/800 mm 2nd table length: 2550/800 mm - Roller width: 700 mm - Table height: 950 mm - Overall dimensions (LxWxH): 2950 x 2000 x 2000 mm - Weight: approx. 3000 kg Advantages: - Made in Germany - 2 roller tables - Used multirip saw - Very good condition Net price: 32,900 PLN Net price: 7,833 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change) Hnjdey Tw S Repfx Ap Hjn

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Hedpfxeuzn Nno Ap Hsnn Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable Hnedpfxjd N H A Ne Ap Hen - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: good (used), Year of construction: 1975, Forming rolls R30/40/50/60/70/80/90/100 Under power good running order Documentation drawings availebel Max. workpiece: 3000Ø Maximum sheet thickness:12mm Max. dishing radius: R-300mm Min. product Ø: 300 Min. plate thickness: 2mm Min. dishing radius: 20mm Working speed: 0 - 5000mm/min. Power: 30kW Length: 5000mm Hnedpoxcnabjfx Ap Hjn Width: 1600mm Height: 2800mm Weight: 6000kg

Condition: excellent (used), Year of construction: 2014, Flanging and dishing machine LUCAS - RD-3800 R MACH-ID 9280 Make: LUCAS Type: RD-3800 R Control: Siemens Simatic Year: 2014 Maximum diameter 3800 mm Minimum diameter 710 mm Thickness 40N/mm2 up to 6 mm Thickness 30 N/mm2 up to 8 mm Thickness 70N/mm2 up to 5 mm Flanging height 90 mm Working speed flanging 0 - 20 M/Min Working cutting speed 0-30 M/Min Tooling package included Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hnsdpfsxta E Rsx Ap Hjn