Used Fidia Dora 76 for sale (1,514)

Condition: excellent (used), Year of construction: 2019, ALUP ALLEGRO 76 10 screw compressor, machine with inverter, after service Technical data: capacity: 12.18 m3/min; motor: 75 kW; max. pressure: 10 bar; Hedpjyfnx Rsfx Adzer year: 2019; operating hours: 8,703 h; compressor fully functional, with warranty, net price: PLN 32,500 gross price: PLN 39,975 Below is a link to a video.

Year of construction: 2009, condition: new, Belt dimensions: 2000x100 mm Belt speed: 30 m/s Angle adjustable from 30 to 90° Hodpfx Adex Davezjr Power: 3 kW, 4000 V, 50 Hz Weight: 200 kg Rollers for grinding reamers: 3/4"; 1/2"; 1"; 1 1/4"

Condition: new, number of rollers: 3, roller (bottom) diameter: 76 mm, roller (top) diameter: 76 mm, side roll diameter: 76 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity: 1270 x 1.5 mm Hsdpfoh Ralqex Adzer - Conical rollers - Removable top roller - Foot control - Emergency stop - Documentation - 400V

Condition: good (used), 2 pieces of frame stands. Hjdpewwr Eaofx Adzer Oscillating shaft and overhung shaft. 2 pieces of split lower frame rollers. Shafts and bearings for rollers. Guide bracket, etc.

Condition: good (used), Year of construction: 1990, pressure ca.10 t Hsdpfx Asul Eawodzor throat anpassbar mm stroke 250 mm table surface area 220 x 220 mm mm material diameter max. ca. Ø 267 mm total power requirement 1,5 kW weight of the machine ca. 430 kg dimensions of the machine ca. 899 x 772 x 1520 m

Condition: ready for operation (used), Size with continuous feeder: max 760x2000 mm min 150x180 mm Size cross fold: min 150x200 mm Hoded N D Niepfx Adzsr Size threefold: min 200x300 mm Size four fold: min 300x400 mm Speed: max 180 m/min Equipment feeder: • continuous feeder • vacutable 1st parallel folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left & right standard accessories: • 1 set of operator manuals • 1set of electrical diagrams • further information: • as is, cleaned available: • immediately

Condition: good (used), Year of construction: 1982, machine/vehicle number: 5261028, Paper cutting machine Polar 76 EM, year of manufacture 1982, program control, air table, 1 spare blade, in good condition, available immediately If you are interested, we will be happy to inform you about other machines in our company. Hodpfx Aorg D Ixsdzjr You are welcome to view the machine at our premises by prior appointment.

Condition: new, - Capacity: 700 x 2 mm - Conical rollers Hjdpfxoihv Hpe Adzsr - Removable top roller - Foot control - Emergency stop - Documentation - 400V

Condition: new, – Capacity: 1070 x 2 mm Hedpohc Uvmofx Adzsr – Conical rollers – Removable top roller – Foot control – Emergency stop – Documentation – 400V

Condition: used, Complete entry line, made by OTO MILLS - Double Decoiler with bottom/top hold-down roll - Strip peeler & Pinch-roll - Automatic strip joiner - Extra-sized horizontal accumulator Scope of supply includes: Double Uncoiler AD508SD - Double hydraulic expansible mandrel - Hydraulic Mandrel rotation - Hydraulic Uncoiler rotation/lock - Hydraulic Uncoiler traverse for alignment - Brake pneumatically-operated disc OTO Mills Pinch-Roll and flattener PRS566 - 3+2 rolls Hsdpfx Asymatijdzjr - Hydraulic roll positioning OTO Mills 100% automatic butt-welding unit GG566 - Complete automatic joining and welding process - Strip exit table with encoder - Motorized strip exit Pinch-roll OTO Mills Horizontal Accumulator - Heavy Duty horizontal accumulator - Motorized Feeding Pinch-roll – 106 KW - Rotating table with Main motor 106Kw - Approx. 6,5 meter external table - Exit strip guiding Turret OTO Mills Tube diameter: 76,1 - 168,3 mm Material thickness: 2 - 6.3 mm Double Uncoiler: AD508SD Pinch-Roll and flattener: PRS566 100% automatic butt-welding unit: GG566 Accumulator: Heavy Duty horizontal accumulator

Condition: used, HF Tube mill LT76, made by OLMA (ITALY) and TLM (SPAIN) Manufacturers : - TUBE MILL : OLMA (Italy) / TLM (Spain) - HF WELDER : GH ELIN (Spain) - ZINC SPRAYING UNIT : METALLISATION Including tooling for : 20 / 25 / 28 / 30 / 32 / 35 / 38 / 40 / 42 / 45 / 48 / 50 / 52 / 55 / 60 / 65 / 77 mm & Turk heads for squares and rectangular shapes Round tube diameter: 20 - 76 mm Square tube diameter: 20×20 – 60×60 mm Rectangular tube diameter: 20×10 – 100×20 mm Tube thickness: 0,9 - 2,5 mm Tube length: 4 - 8 m Hedpjyl Ukasfx Adzjr Speed: Up to 40 m/min

Condition: new, Year of construction: 2025, tube diameter 20 - 76 mm grinding band dimension 100 x 2000 mm 0 2905 U/min band speed 30 m/sec 0 3 kW voltage 400 V Hjdpfeyv Nvyex Adzor weight 200 kg

Condition: ready for operation (used), Year of construction: 1994, machine/vehicle number: 9314, functionality: fully functional, controller model: Beckhoff mit Addison DataBend, wall thickness: 3 mm, working length: 6,000 mm, workpiece diameter (max.): 76 mm, Equipment: CE marking, TECHNICAL DETAILS Hodpfx Aox Rbf Nodzsr Max. diameter: 76 mm Max. wall thickness: 3 mm Max. bending length: 6,000 mm MACHINE DETAILS Control: Beckhoff with Addison DataBend Dimensions & Weight Dimensions (L x W x H): 8,000 mm x 2,000 mm x 2,000 mm Transport weight: 6,100 kg Transport packages: 1 EQUIPMENT incl. several mandrels and bending formers Documentation CE marking

Condition: new, width of the strips 100 mm band length 2000 mm Hedpfx Adjt Eaf Uezor band speed m/sec tube diameter 16,5 - 76 mm angle adjustable from - to 0 - 65 Grad connected load frequency 400 V total power requirement 2,2 kW weight of the machine ca. 0,17 t dimensions of the machine ca. 1,3 x 0,7 x 1,1 m ipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm

Condition: new, width of the strips 100 mm Hedpfxoupw Rie Adzer band length 2000 mm band speed 15/30 m/sec tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad connected load frequency 400 V total power requirement 2,5 /3,3 kW weight of the machine ca. 0,19 t dimensions of the machine ca. 1,2 x 0,75 x 0,7 m

Condition: reconditioned (used), Year of construction: 1987, Circular saw feed unit PANHANS Type 76 Hodpfx Adjyg Erwszor 3 drive rollers (new) Roller diameter: 110 mm Front roller width: 50 mm Middle roller width: 20 mm Rear roller width: 50 mm Axle spacing: 200 mm Feed speed: 13 + 26 m/min Drive power: 0.14 kW Max. workpiece height: 80 mm Min. workpiece length: 200 mm Extraction nozzle: 80 mm

Condition: new, sheet width 1070 mm plate thickness 2,0 mm distance between columns 1100 mm diameter of upper rolls 76 mm total power requirement Handbetrieben weight of the machine ca. 0,22 t dimensions of the machine ca. 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash Hjdpfsfv A Epjx Adzor - Documentation - 400 volts - CE certificate

Condition: excellent (used), Year of construction: 2019, Conveyor belt Arburg (76) length 2,37m , belt width 25cm, year 2019 Hsdpfxov I S Ttj Adzsr

Condition: used, Year of construction: 1984,

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Belt Grinder for Pipe and Profile Ends Demonstration machine, as new Year of manufacture: 2008 Robust belt grinding machine for pipe and profile ends on a stable base frame with a large drive motor for professional metal processing. Description – ideally suited for finishing pipes and profiles – for diameters from 20 to 76 mm – grinding angles from 30° to 90° – high belt speed of 30 m/sec – powerful motors Hsdoydpkxjpfx Adzor – vibration-free operation for optimal results Technical Data Motor power: 3 kW Grinding range: Ø 20–76 mm Belt dimensions: 100 x 2000 mm Guide piece adjustable from 30° to 90° Speed: 2905 rpm Belt speed: 30 m/sec Dimensions: 1300 x 640 x 440 mm Weight: 168 kg Accessories (optional) Roller set (radius rollers) for pipe and profile end grinder, ø 20 – 26 – 32 – 42 – 48 – 60 – 76 mm

Condition: new, sheet width 700 mm plate thickness 2,0 mm distance between columns 750 mm diameter of upper rolls 76 mm total power requirement ß,75 KW weight of the machine ca. 0,29 t dimensions of the machine ca. 1,3 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate Hedporrkdkofx Adzjr

Condition: new, sheet width 1070 mm plate thickness 2,0 mm Hodpfxefv A Etj Adzer distance between columns 1100 mm diameter of upper rolls 76 mm total power requirement 1,1 KW weight of the machine ca. 0,37 t dimensions of the machine ca. 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate

Year of construction: 2008, condition: used, Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker can be perfect solution for your tube production business. This line will allow you to produce huge range of round and rectangular pipes in very easy and automatic way. Line is equipped with important machines to make manufacturing process maximum convenient and productive. You can purchase machine as is where is or we can offer to make repair. Also we can provide shipping and installation service. If you start business with us you will never regret! Hsdji D D Efopfx Adzer Make: Guzzetti (Italy) Year: 2008 Automatic stacker: MAIR / Italy Tube range: D76- D200 Material’s thickness is 2-6mm (incl and SS) PLC – Siemens and all inverters and servo drives Welding aggregate is Thermomachine / Italy This line is also equipped and with the following machines: – Double dec.machine – Strips ends manually welding machine – Horizontal accumulator – 10 stations forming machine Material thickness is adjusting not manually – it is done by el.motors depend of el.indicators e. Welding aggregate is Thermomachine / Italy f. Cooling system g. System for automatic control of tubes sections dimensions h. 4 calibration stations + 4 TH The TH are with mechanical movements depend of necessary calibration. i. Fly cut-off unit is with two geared motors : one for hot cut off and another for cold cut off j. Automatic stacker is MAIR . Max tubes length is 12m. Packets for round tubes are hexagonal or octagonal types and for square tubes square or rectangular depend of tube’s dimensions. Tools available with machine: – Round Tube Ø76,1 – 1 set Ø88,9 – 1 set Ø95 – 1 set Ø101,6 -1set Ø108-1set Ø114,3-1set Ø125 – 1 set Ø133-1set Ø150-1set Ø159-1set Ø188-1set – Rectangular tube 60×60 70×70 75×75 80×80 85×85 90×90 100×100 105×105 120×129 125×125 150×150

Condition: used, Year of construction: 1998, Used, in top condition Make: Panhans Model: 76 Year of manufacture: 1998 Machine No.: 648 Original price approx. €4,800.00 Location: 97447 Gerolzhofen, loaded free, unpacked Handover in as-inspected condition, without warranty or guarantee Hjdpfx Asxuv Nzsdzjr

Condition: excellent (used), Gluing machine Guillotine Hsdpfettu Risx Adzor cross-cut saws milling cutter Scraper Polishing machine