Used Galen Galen Clamshell Bucket Liebherr A944 for sale (1,832)

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Bsdpfx Amezlr N Sszslk Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged.

Condition: used, power: 140 kW (190.35 HP), color: yellow, overall weight: 30,700 kg, Year of construction: 2019, operating hours: 5,964 h, Equipment: additional headlights, adjustable boom, cabin, gripper hydraulics, Steel chains Quick-release mechanism Blodpfx Ajzk H Dbomzjk 1 seat Errors and omissions excepted.

Condition: used, Year of construction: 1969, max. wheel diameter 265 mm gear width 45 mm max. module 4 min. module 0,3 max. workpiece diameter 300 mm stroke length max. 0-50 mm stroke position adjustment 25 mm distance work spindle /surface of the table 170/245 mm spindle taper innen MK 4 table-size 180 mm table hole 95/75 mm strokes per minute 450 - 840 total power requirement 10 kW weight of the machine ca. 5200 kg dimensions of the machine ca. m Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 mm Table travel, cross, approx. 175 mm Number of strokes, infinitely variable 450 - 840 /min Blsdpfx Aot Hwrujmzsk Feed range 0.09 - 0.6 mm/stroke Rotary feed, strokes per cutter revolution 2,722 - 681 Total electrical load 10 kW - 380 V - 50 Hz Weight 5,200 kg Accessories / Special Features * Selection switch for various working programmes, and for manual control. * Multi-cut device for roughing, finishing and sparkout, via presettable micrometer screws. * Hydraulic workpiece external clamping device mounted on table, for internal gears (a sort of collet chuck). * Separate switch cabinet. * Separate hydraulic unit. * Hydrostatic straight guide, with cooling aggregate for the hydrostatic pressure oil, separate. * Lateral table adjustment ensures optimal ram lift from workpiece. * Infinitely variable number of strokes via DC motor. * Built-on coolant device. * Presettable impulse counter for switching off table after every cut. With digital display. * Various change gears.

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and Bljdpst Hw R Dofx Amzsk unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1999, max. wheel diameter 280 mm gear width 330 mm max. module 5 min. module 1 Control LIEBHERR CNC total power requirement 28 kW weight of the machine ca. 12 t Bljdpfet Hwu Ajx Amzjk dimensions of the machine ca. m

Condition: excellent (used), functionality: fully functional, fuel type: diesel, Year of construction: 2014, operating hours: 11,000 h, Pelle sur pneu Liebherr a 918 compact 2014 11000 h bras déport 2 godets + 1 curage orientable Bsdpfxszi U Ncs Amzolk

Condition: used, power: 56 kW (76.14 HP), color: yellow, overall weight: 10,500 kg, tire size: 9.00-20, number of seats: 1, Year of construction: 2003, operating hours: 10,780 h, Equipment: additional headlights, adjustable boom, cabin, gripper hydraulics, Quick-change mechanism Ditching bucket, 1,600 mm Protective shield Adjustable boom, laterally pivotable Blsdpezkkq Ssfx Amzek Errors and omissions excepted.

Condition: good (used), Quick coupler system: Yes Blsdpst Dlviefx Amzok Technical condition: good Visual appearance: good Please contact Ferdinand Pater for more information

Condition: good (used), Year of construction: 2001, serial number 630-8394 output 210 kw Bodpjzip Rujfx Amzslk Number of working hours 9050 h with extended boom, type: LO4651B, serial no. 3001335Note: The Longfront has a long and a short boom!

Condition: used, Year of construction: 2022, operating hours: 2,300 h, Rear outrigger plate, 2,750 mm wide Twin tires, Liebherr EM 22, 290/90-20 PR 18 Undercarriage, 2,750 mm wide Comfort radio Comfort driver's seat Variable-geometry boom, 5.40 m Stick, 2.45 m Incl. quick coupler SW48LF Location: Welzow Please note: The offered machine comes from our rental fleet, therefore the specified operating hours may vary. Bodpfx Aszk Ac Hemzolk The machine has a warranty until May 22, 2026, or a maximum of 4,000 operating hours – whichever comes first.

Condition: new, Year of construction: 2015, Storage location number: 100634846 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Liebherr SW66 LikuFix Pin 80/90 Bljdozk Adqopfx Amzek Axle distance 390 Boom width 450 Location: Passau

Condition: used, Year of construction: 2021, operating hours: 3,225 h, Adjustable boom 5.40 m, bucket arm 2.65 m, undercarriage width 2,750 mm, twin tires with intermediate rings Mitas EM-22, quick coupler SW48 Likufix, without attachments // Location: Welzow. Bodpezk Ah Aefx Amzjlk Please note: The offered machine comes from our rental fleet, therefore the stated operating hours may vary.

Condition: new, Year of construction: 2014, Storage location number: 100539905 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Pin: 60/60 Bsdjzk Ah Njpfx Amzolk Axle distance: 340 Stem width: 280 Mounting: SW48 With load hook: 12 tons Location: Passau

Condition: used, Year of construction: 2019, operating hours: 10,000 h, Chains D8N, 1-link ground plates, 710 mm U-shaped blade, 4300x1700 mm, with straight cutting edges, capacity 11.8 m3 Rear counterweight Please note: The machine offered comes from our rental fleet, therefore the stated operating hours may vary. Bljdpfjzk Ahpex Amzok Location: Welzow

Condition: new, Year of construction: 2017, operating hours: 10,400 h, Transport dimensions (L x W x H): 0 x 0 x 0 Bljdpjzk Agfofx Amzjk ---- Double-pendulum suspension, base plates 710mm, air conditioning, U-shaped sign 4300mm x 1700mm, rear counterweight, Trimble ready Location: Welzow

Condition: used, Year of construction: 2020, operating hours: 3,600 h, – Monoblock boom, Lehnhoff quick coupler MS21 Bedpfx Aozk Aimjmzjlk – Additional hydraulics for hammer/shear/grab – Includes 1 digging bucket – Good condition – Offered on behalf of a customer – Contact: Diego Negwer

Condition: used, Year of construction: 2024, operating hours: 1,610 h, ---- Undercarriage NLC, track width 2390 mm Tracks D6C, 3-lug track shoes 600 mm, 48 links Track guide, three-part Premium operator's seat Comfort radio Monoblock boom, 6.00 m Blsdpfx Amszk Aigjzsk Stick, 3.00 m Includes hydraulic quick coupler CW.S.125 Optional: Quick coupler SW48 Location: Welzow

Condition: used, Year of construction: 2024, operating hours: 1,370 h, Lower carriage NLC, track width 2390 mm Tracks D6C, 3-bar pad shoes, 600 mm, 48 links Track guide, three-part Premium operator seat Monoblock boom, 6.00 m Stick, 3.00 m Includes Verachtert quick coupler CW.S.125 Optional: Quick coupler SW48 Blsdpfx Amezk Aiyezsk Location: Welzow

Condition: used, Year of construction: 2025, operating hours: 497 h, ---- Automatic climate control Rear outrigger pad, 2,550 mm wide Twin tires, Liebherr EM 22, 290/90-20 PR 18 Radio Variable outrigger, 4.85 m Stick, 2.45 m Biodiesel Including quick-change system SW48 Likufix Please note: The offered machine comes from our rental fleet, so the stated operating hours may vary. The machine has a warranty until 02/09/2029 or a maximum of 4,000 operating hours – whichever comes first. Bledpszk Ab Aefx Amzjk

Condition: used, ---- GM8 split shell support Cutting width: 600 mm Slew bearing backlash Bledpfx Ajzkz Hksmzsk The rotating feedthrough must be checked for leaks Compatible with MS10

Condition: new, Year of construction: 2018, Storage location: 100239478 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Equipment: Standard equipment: 1b) Standard version with a 27.0 m outreach Bodozkz Inspfx Amzolk 2c) Radio remote control 2d) Small control panel 3a) Complete with pyramid supports 7) Collector for continuous rotation 8) MICROMOVE positioning mode 9) Cast ballast with 4 x concrete ballast blocks, each weighing 910 kg Location: Regensburg

Condition: new, Year of construction: 2018, Storage location number: 100325836 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Reach: 62.5m Including counterweight Hoisting mechanism: 45kW 120HC counter-rotating upper carriage Full-view cab Including radio remote control with feedback Including undercarriage with 4.6m track width, including spindles and support plates 2x 12.5m tower Including central ballast Location: Nuremberg Bsdpfxjzkz Nlj Amzolk

Condition: used, Year of construction: 2017, operating hours: 7,670 h, – Air conditioning – Tilting device – Preparation for laser control – Radio – Drive unit has been renewed Bodpfx Aezkz S Homzjlk – Machine width: 3100 mm – Incl. blade shield 3900 mm – Location: Passau

Condition: used, Year of construction: 2021, operating hours: 2,590 h, Operating weight: 21,900 kg ---- Lower carriage LC, track width 2,250 mm Support dozer blade 2,850 mm, controlled via mini-joystick Comfort radio Bsdpfx Aozkz Etomzelk Comfort driver's seat Variable outreach boom 5.30 m, controlled via mini-joystick Stick 2.45 m Incl. quick coupler SW48 Likufix Location: Andernach

Condition: new, Year of construction: 1988, operating hours: 18,200 h, Transport dimensions (L x W x H): 0 x 0 x 0 ---- Boom, adjustable jib, dipper stick without cylinder, without attachments, preparation for grapple attachment. Bjdpezkz R Nofx Amzelk