Used Gang Saw for sale (6,095)

Condition: new, Year of construction: 2026, functionality: fully functional, cutting range round steel at 90°: 320 mm, 2 units of Behringer HBE 321 A dynamic new machines available for immediate delivery from stock. Attention: You can receive up to 15% funding if you replace an old sawing machine with a new one! Equipment: Auto-Feed Control AFC Pro (Pos. 33) Active cut monitoring (Pos. 22) BEHRINGER screw-type chip conveyor (Pos. 105) Automatic bar-end detection (Pos. 535) Gsdpfx Asz Epy Sefuobu Lighting (Pos. 941)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 1045331039, Elumatec DG 104 Twee-kopszaagmachine - bouwjaar 2006 - in goed werkende staat Gjdpfxez Eqxvs Afuebu De machine kan ter plaatse in werking worden getoond; demontage is voor rekening van de koper. Machine beschikbaar begin december 2026.

Condition: used, Year of construction: 2006, Panel saw Manufacturer: Altendorf Type: F45 Year of manufacture: 2006 Technical data Saw blade diameter: max. 500 mm Main motor power: 5.5 kW Scoring motor: 0.75 kW Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Gbodpfx Afjz E Rnqjusu

Condition: good (used), Year of construction: 2016, Wheel diameter 470 mm Cutting height 265 mm Gbedpfxsz Hd Sle Afuju cutting width 390/465 mm Motor output 1,6 kW Table dimensions 535/485 mm Table tiltable 45 Grad Dimensions (L/W/H) 800/490/2000 mm machine weight ab. 157 kg

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,41 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with counter-clamping device for double workpiece clamping Gedpofg Rlbefx Afujbu •Base with removable coolant tray •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side •Turntable with additional central axis

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness Gbjdpfx Aofg Rlcsfuju different cutting programs, each with a different cutting length and number of pieces program.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) Gbodpfx Afed Iipzjusu • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, 330 mm 330 mm 400x330 mm saw band length 4570 x 34 x 1,1 mm table height 800 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 2,35 t dimensions 2,23 x 2,15 x 1,8 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length Gedpfx Aefb Nbgsfuobu and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm Gbsdpfsfgpdljx Afusu capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,38 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Manual vertical circular saw for miter cuts from 60° left to 45° right.

Condition: used, Year of construction: 1990, functionality: fully functional, saw blade diameter: 400 mm, total height: 1,960 mm, total width: 1,070 mm, overall weight: 1,350 kg, type of input current: three-phase, saw drive: 5,500 W, opening width: 160 mm, Used Kaltenbach automatic cold circular metal saw, model KKS 401 NA AB. Suitable for sawing profiles, tubes, as well as flat and solid materials made of steel, cast iron, and non-ferrous metals. The machine features an NC-controlled feed axis, a hydraulic saw feed, hydraulic workpiece clamping, a swiveling saw table for miter cuts, and a coolant system. Saw blade diameter is 400 mm as standard, with cutting speed frequency-controlled from 6 to 30 m/min. The machine control and electrical system have been modernized. Gjdpfx Afjzmf H Touobu

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Gedpfx Ajfg E Hyefuebu Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) Gbjdsfg E H Eopfx Afuou - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: good (used), Year of construction: 1988, Double Mitre Saw Düspohl DGK 400 B Stock number: 001071 Double Mitre Saw Düspohl Type: DGV 400 B Year of manufacture: 1988 Swivelling saw blades Max. cutting length: 2500 mm Gsdpfx Aoyv R Nzofujbu Approx. cutting height: 70 mm Max. saw blade diameter: approx. 300 mm Was used for door frames Motor power: 4 kW Location: ex stock 54634 Bitburg - immediately available -

Condition: used, SCM Type M3 multi-blade and trimming circular saw for efficient rip cutting, trimming and cutting to size of solid timber, boards and planks. This robust machine is suitable for precise batch cutting with multiple saw blades and a continuously adjustable chain feed. Gedpfoztvrasx Afuebu Technical data: - Chain width: 300 mm - Cutting height: ~100 mm - Engine: 35 PS

Condition: like new (used), HSS saw grinder LOROCH model SW Gsdpfx Aei El Hcjfusbu

Condition: excellent (used), HSS saws chamfering machine EYAN Gjdohzcd Ujpfx Afusbu

Condition: excellent (used), Carbide saw grinder VOLLMER model CX100 Godpfxoigaf Ue Afusbu

Condition: ready for operation (used), Altendorf WA 80 panel saw - Cutting length on the carriage: 320 cm - Cutting height adjusted electrically - Blade angle from 0 to 45° adjusted electrically Gbjdpfxsz I Im Aj Afusu - 5.5 kW motor, scoring saw - Carriage on rods The machine is in very good condition and has been used sparingly.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, cutting range round steel at 90°: 120 mm, cutting range square steel at 45°: 120,100 mm, cutting range square steel at 90°: 170,100 mm, rotational speed (min.): 17 rpm, For sale: 1 used vertical metal circular saw Manufacturer: Eisele Behringer Model: VMS 350 Year of manufacture: 2026 Technical data: TECHNICAL DATA: * Cutting range, round: 120mm, square 120x100mm (45 degrees) and 170 x 100mm (90 degrees) * Drive power: 2.1 KW / 400 V / 50 Hz * Saw blade diameter: 350mm Godpfx Afjz Hwa Aouebu * Includes coolant pump Further data can be found in the attached photos from the documentation. The machine comes with a feed roller conveyor, length stop, documentation, coolant, and three saw blades (two of which are still in their original packaging and are new). The machine can be viewed in our warehouse in 09599 Freiberg.

Condition: used, Year of construction: 2016, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 325 mm, cutting width (max.): 500 mm, control type: manual, pivoting range: 30 °, actuation type: hydraulic, total height: 1,400 mm, total length: 2,050 mm, total width: 1,300 mm, overall weight: 910 kg, table height: 76 mm, Equipment: CE marking, documentation/manual, Bandsaw machine MEBAswing 320 G-HSS Year of manufacture: 2016 Cutting capacity, round at 90 degrees: Ø 325 mm / at 45 degrees: Ø 300 mm Cutting capacity, flat at 90 degrees: 500 x 300 mm / at 45 degrees: 300 x 300 mm Saw blade speed 15-150 m/min Saw blade dimensions 4200 x 34 x 1.1 mm Gbsdpsz I Ig Nsfx Afueu Connection: 400V 3-phase Total power requirement 3 kW Dimensions L x W x H: 2050 x 1300 x 1400 mm Weight 910 kg Standard equipment: Quick mitre adjustment from 90° to 30° in increments of 0.5° accuracy according to the scale. The mitre pivot point is the intersection between the saw blade and the material support, thus there is no change in the length dimension. At every angle setting of the saw frame, the material is clamped parallel at 90°. Coolant system with electric submersible pump Machine stand with chip collection tray Precise saw blade carbide roller guide, saw blade brush MEBA high-performance package, "HSS" version: Hydraulic raising and lowering of the saw frame and hydraulic clamping of the sawing material. Infinitely adjustable hydraulic cutting pressure and feed rate. Display of lowering speed on a scale. Display of cutting pressure on a manometer. Rapid lowering of the saw frame via push button to the material edge Frequency-controlled AC drive 15-150 m/min, 3 kW Hydraulic raising and lowering of the saw frame Including special equipment: Micro-dosing system: Economical and clean sawing: Minimum quantity lubrication with high-performance spray oil for dry chips without droplet formation. Ideal for tubes and profiles. Switching from coolant function to micro-spray nozzle. Compressed air connection required. Laser light for cut line indication/marking saw: Projects the cut line onto the sawing material and indicates the cutting channel. The workpiece can be manually aligned for a saw cut based on the marking. Clamping pressure adjustment at a fixed control panel: The clamping pressure can be manually adjusted via a pressure reducing valve. The applied pressure can be read on the corresponding manometer (in bar). Material stop 0-800mm 3 roller supports 6 new bandsaw blades High-performance spray oil Saw blade brushes

Condition: used, Year of construction: 1994, Wheel diameter: 500 mm with motor brake. Maximum cutting height: 320 mm. Column side left, top and bottom, APPA guides. Motor: 1.5 kW. Table tiltable. Mobility device with steering wheels and blade tension indicator. Blade length: min. 4040 mm, max. 4140 mm. Location: Nattheim. Gbedpfswl D S Usx Afuju

Condition: used, Storage location: Nattheim Gbedpfx Asvvkrdsfueu

Condition: used, Year of construction: 1973, Max. cutting length 3200 mm (distance from 1st to 3rd saw blade) with left-side circular saw tiltable up to 45°. Cutting capacity 2200 x 2500 mm. 3 motors, each 4.5 kW. Both cross-cut saws tiltable from 45° to 90°, each with a scoring motor. All three saws up to 400 mm diameter. Minimum cutting width 210 mm. Both scoring saws pneumatically moved forward and back with vacuum suction cups for panel fixation. Storage location: Nattheim. Gbsdjvvkm Iopfx Afuou

Condition: new, Year of construction: 2027, I am selling a KUSING RP-200 rip saw. Godpfsz I Twmox Afusbu This is a small, compact multi-rip saw with a 200 mm arbor length. The machine is open on one side. It is ideal for resawing, precision cutting, or processing short workpieces starting from a length of 200 mm. Technical parameters: Maximum cutting width 200 mm Maximum material height 80 mm Shaft diameter ø 30 mm Saw blade diameter ø 200 - 300 mm Saw blade speed 4000 rpm Motor power 7.5 / 11 kW Feed motor 0.55 kW Material feed speed 2 – 20 m/min Dust extraction 2 x 120 mm Machine weight 500 kg The machine is made in Slovakia. Possibility of configuring the machine according to requirements.

Condition: excellent (used), The PANHANS ECOPAN is a used beam saw with PC control and optimization. It features a scoring saw, automatic cut length detection, and a side pressing device. The cutting length and cutting width are both 4,200 mm. Control and material handling: The PC control system supports the optimization of the processing. The automatic cut length detection complements the control system, while a label printer is included as standard. Air cushion tables and movable tables are available. The side pressing device complements the material guidance on the machine. Saw unit and feed: The main saw is driven by an 11 kW motor and operates with a saw blade of 300 x 30 mm. The scoring saw has a 1.5 kW motor and a saw blade of 180 x 30 mm. The maximum cutting height is 72 mm. The saw carriage has a continuously adjustable feed, with a feed rate of up to 100 m/min for the saw unit and up to 80 m/min for the width fence. Voltage and connections: The machine is equipped with six clamping devices. For dust extraction, there is a dust extraction nozzle with a diameter of 140 mm at the bottom and three dust extraction nozzles, each with a diameter of 100 mm, on the beam. Gbjdsyrqrtepfx Afuou Condition: The PANHANS ECOPAN is offered as a tested used machine. Quality Information: - Complete basic inspection - Complete basic cleaning - Electrical system checked - Ready for immediate use