Used Gantry Straightening Press With 400 T Ca for sale (88,080)

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Chodpfjzt H T Iex Ahmjc Manufacturer: Gantenbein, Switzerland

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Chodjztn Erjpfx Ahmjc Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Condition: new, Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 800 Chjdpfed A Nc Dsx Ahmsc - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 80 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 7,5 KW - 400 V 50 hz 3 ph. - working height 940 mm - closed table - replaceable wear plate - weight 2100 kg - bending capacity: flat material max. 300x32 mm at Vmax round tube 3/8" - 3" gas pipe

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Chjdpfx Asd Swtaehmec Weight 1250 kg Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 3,300 mm, total width: 1,650 mm, total height: 2,500 mm, overall weight: 9,600 kg, feed force X-axis: 600 N, feed length X-axis: 180 mm, product height (max.): 455 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC SERVO PRESS BRAKE MTP 160X3200 The Hydraulic CNC Servo Press Brake MTP 160x3200 is a modern machine designed for precise bending of mild steel, stainless steel, and aluminum sheets. With a pressing force of 160 tons and a bending length of 3200 mm, it is suitable for both serial production and custom fabrication. The machine is equipped with the MTP-3212 CNC controller and 4 CNC-controlled axes (Y1, Y2, X, R), ensuring high accuracy, repeatability, and fast positioning. The intuitive controller with a large color touchscreen allows easy programming, automatic bending calculations, and storage of programs and tooling data. The press brake incorporates high-quality components from leading manufacturers, including a Rexroth hydraulic system, Schneider Electric components, and Omron safety devices. Steel hydraulic connections improve reliability and minimize the risk of leaks. For operator convenience, the machine features a mobile control panel, two front support arms, and LED working area illumination. Safety is ensured by a light curtain, side guards, rear safety protection, and easily accessible emergency stop switches. The machine is supplied with a CE Declaration of Conformity and an English user manual. TECHNICAL SPECIFICATIONS • Pressing force: 160 T • Maximum bending length: 3200 mm • Maximum sheet thickness: up to 8 mm • Control system: MTP-3212 CNC • Number of CNC axes: 4 (Y1, Y2, X, R) • Distance between side frames: 2600 mm • Throat depth: 320 mm • Ram stroke: 180 mm • Maximum opening height: 455 mm • Back gauge travel (X-axis): 600 mm • Tool clamping system: AMADA quick clamping • Motor power: 11 kW • Power supply: 400 V / 50 Hz • Dimensions (L × W × H): 3300 × 1650 × 2500 mm • Weight: 9600 kg ADDITIONAL INFORMATION • Professional technical support included • Assistance with tooling selection and bending parameters • CE Declaration of Conformity included • English user manual supplied • Spare parts support during and after the warranty period Csdpjzcmrdsfx Ahmohc • Possibility to extend the warranty beyond the standard warranty period The machine is sold on an EXW basis. Transportation can be arranged upon request and quoted separately depending on the delivery destination. Our team will be pleased to provide a competitive transport quotation to any location within Europe and worldwide. For more information about our company, machines, and services, please visit our website. Metal Technics Polska is a trusted supplier of industrial machinery, offering professional sales support, technical assistance, spare parts availability, and after-sales service for customers throughout Europe.

Condition: used, pressure 100 t stroke 300 mm Cylinder 205 mm distance between table / ram 520 mm table surface area 1100X350 mm ram surface 350X350 mm total power requirement 7,5 kW with roller conveyor, 1: Roller conveyor: 2000x500 inlet 1: Roller conveyor: 2000x500 outlet Cedpfx Ajyutqwjhmehc The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), functionality: fully functional, Press line for manufacturing can ends (tops and/or bottoms) Chedsx Ezuyjpfx Ahmec Comprising: - Bliss 1831 double die press - Bliss double curler - IMC / Grace compound liner - Drying oven - Production capacity: up to 600 ends per minute

Condition: new, 400 kN Chjdpfx Aey H N Nhjhmoc stroke length max. 285 mm working feed 9 mm/sec return speed 20 mm/sec 660x1250 mm work height max. 930 mm toolpiece height max. 250 mm total power requirement 4 kW 200x26 mm bending capacity max. - round 60x5,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, operating speed: 80 mm/s, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 7,400 kg, feed length X-axis: 600 mm, feed length Y-axis: 120 mm, spindle motor power: 11,000 W, product height (max.): 390 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC SERVO PRESS BRAKE MTP 125×3200 – 125 T – MTP-3212 – 4 AXES X,Y1,Y2,R+V The brand-new MTP 125×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its advanced CNC control system and robust welded construction, it is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup. STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X and Y axes • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • LED working area illumination • Mobile control panel The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron safety components The machine is equipped with safety light curtains, side guards, a rear safety fence, emergency stop switches, a CE Declaration of Conformity, and an operating manual. TECHNICAL SPECIFICATIONS • Pressing force: 125 T • Maximum bending length: 3200 mm • Maximum sheet thickness: up to 6 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: X, Y, R + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions: 3870 × 1550 × 2400 mm • Machine weight: 7400 kg TECHNICAL SUPPORT We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Chedpjzg Dk Defx Ahmsc Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,400 kg, input voltage: 400 V, total length: 1,150 mm, total width: 900 mm, total height: 1,910 mm, 16T OPEN BACK ECCENTRIC PRESS Professional 16-ton eccentric press designed for punching, stamping, bending and forming metal components. The open back frame construction provides easy access to the working area and comfortable machine operation. The rigid and durable construction ensures stable operation even during intensive industrial use. The machine is equipped with a dry pneumatic friction clutch and modern safety systems. Main machine features: • Open back frame design • Rigid and durable construction • Fixed working table • Transversely mounted crankshaft • Horizontally mounted crankshaft • Dry pneumatic friction clutch • Lifting balance device • Safety valves • Manual control • High production efficiency TECHNICAL SPECIFICATIONS: • Pressing force: 16 t • Stroke under load: 2 mm • Slide stroke: 0–70 mm • Number of strokes: 125 strokes/min • Maximum die height: 170 mm • Distance from slide block to frame: 170 mm • Working table dimensions: 320 × 480 mm • Table hole diameter: Ø100 mm • Opening dimensions: 160 × 240 × Ø210 mm • Slide dimensions: 180 × 200 mm • Shank hole size: Ø40 × 60 mm • Distance between columns: 220 mm • Table thickness: 60 mm • Maximum tilt angle: 25° • Motor power: 1.5 kW • Machine dimensions: 1150 × 900 × 1910 mm Codpfx Ahsyrr E Iemehc • Weight: 1400 kg Equipment: • Light curtains • Mechanical guards • Ejector in lower table Delivery conditions: • Delivery to customer possible • Shipping cost calculated individually • Brand new machine • 12-month warranty • Warranty and after-sales service • CE declaration of conformity Additional delivery information: • Delivery can be arranged throughout Europe • Shipping cost calculated individually depending on customer location • Fast order processing • Personal collection possible • Machine professionally secured for transport

Condition: like new (used), Year of construction: 2019, CAP 30 APPLICATOR 1000 SLIM FOR HELICAP 23 PRO: YOM 2019 VERSION 400v 9.000 RUNNING HOURS Cedeyynd Repfx Ahmshc NEW CONDITION

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, type of input current: three-phase, oil tank capacity: 90 l, total length: 1,630 mm, total width: 1,020 mm, total height: 1,950 mm, overall weight: 1,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, OFFER OF THE WEEK! MTP HYDRAULIC CNC PRESS BRAKE 1320 MM / 40 T 2-AXIS X + Y – TOUCHSCREEN CONTROL Metal Technics Polska is a manufacturer and importer of professional CNC machines, laser systems and metalworking equipment. For 15 years, we have supplied reliable technologies to companies across Europe. The MTP 1320/40 hydraulic CNC press brake is a compact and efficient machine designed for accurate and repeatable sheet-metal bending. With a pressing force of 40 tonnes and a working length of 1320 mm, it is ideal for workshops and production companies looking for a practical and easy-to-operate bending solution. MTP-3212 TOUCHSCREEN CONTROL The machine is equipped with the MTP-3212 touchscreen controller and 2 controlled axes: • Y axis – ram movement / bending depth • X axis – rear back-gauge positioning Controller functions include: • Touchscreen interface • Programming of bending operations • Storage of bending programs • Manual programming • Tool parameter management • SD card memory • X-axis back-gauge positioning • Y-axis bending-depth control AMADA-PROMECAM STYLE TOOL CLAMPING The machine is equipped with an AMADA-Promecam-style manual upper tool-clamping system, allowing convenient replacement and positioning of the segmented upper tooling. SAFETY EQUIPMENT • Side safety guards • Front safety light curtains • Secured rear working area • Emergency stop system • Automatic stop when the protected safety zone is breached TECHNICAL DATA • Nominal force: 400 kN / 40 t • Working length: 1320 mm Chodjyr N E Espfx Ahmsc • Controlled axes: X + Y (2 axes) • Distance between columns: 900 mm • Throat depth: 180 mm • Ram stroke: 100 mm • Maximum daylight: 290 mm • Back-gauge range: 500 mm • Approach speed: 80 mm/s • Working speed: 9 mm/s • Return speed: 80 mm/s • Main motor power: 3 kW • Dimensions: 1630 × 1020 × 1950 mm (L × W × H) • Weight: 1500 kg • Controller: MTP-3212 touchscreen • Tool clamping: AMADA-Promecam style • Crowning / compensation system: Not equipped The MTP 1320/40 combines compact dimensions, simple touchscreen operation and reliable hydraulic technology. The X + Y axis configuration provides automatic back-gauge positioning and control of the bending depth, making the machine suitable for individual jobs as well as repeat production. DELIVERY Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to destination. Please provide your delivery address or postal code to receive a transport quotation.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, operating speed: 80 mm/s, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 7,400 kg, feed length X-axis: 600 mm, feed length Y-axis: 120 mm, spindle motor power: 11,000 W, product height (max.): 390 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, AVAILABLE IN STOCK – READY FOR IMMEDIATE DELIVERY HYDRAULIC CNC SERVO PRESS BRAKE MTP 125×3200 – 125 T – MTP-3212 – 4 AXES X,Y1,Y2,V The brand-new MTP 125×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its advanced CNC control system and robust welded construction, it is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y1, Y2, V), ensuring exceptional accuracy, repeatability, and fast production setup. Cjdoz E N Shepfx Ahmshc STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven backgauge (X-axis) and synchronized cylinders (Y1, Y2 axes) • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • LED working area illumination • Mobile control panel The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron safety components The machine is equipped with safety light curtains, side guards, a rear safety fence, emergency stop switches, a CE Declaration of Conformity, and an operating manual. TECHNICAL SPECIFICATIONS • Pressing force: 125 T • Maximum bending length: 3200 mm • Maximum sheet thickness: up to 6 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: X, Y1, Y2, V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions: 3870 × 1550 × 2400 mm • Machine weight: 7400 kg TECHNICAL SUPPORT We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: used, Year of construction: 1984, pressure 10 t distance between columns 500 mm stroke 200 mm total power requirement 10 kW weight of the machine ca. 4.500 kg Csdpst Hwwdofx Ahmshc dimensions of the machine ca. m

Condition: new, Year of construction: 2026, machine/vehicle number: PB16040, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table width: 100 mm, table length: 4,000 mm, table height: 850 mm, throat depth: 400 mm, ram plate width: 1,900 mm, ram plate length: 4,000 mm, distance table to ram: 3,500 mm, clearance between the columns: 3,500 mm, oil tank capacity: 400 l, total length: 4,500 mm, total width: 2,000 mm, total height: 2,650 mm, overall weight: 12 kg, Equipment: CE marking, safety light barrier, High-end electro hydraulic servo system, upper slider controller by the full loop synchronization. Main servo motor guaranteed high efficiency, lower noise, energy saving. Mechanical compensation on crowning of worktable and deformation compensation on throat, ensuring bending strength and precision. Qualified accessories used to ensure press brake’s long-term stability running. Ball screw and linear guide adopted to ensure accurate and fast backgauge. Movable front support helps with bending convenience. 2D and 3D multifunctional CNC system from Delem and Cybelec. Equipped with side guards and closed rear guards. 8+1 axis/6+1 axis control European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 4000 mm 3 Worktable height 850 mm 4 Distance between vertical 3500 mm 5 Stroke 250 mm 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1 Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China Chodpoy U Hmgsfx Ahmec 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA69T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: used, functionality: fully functional, mileage: 687,000 km, power: 294.2 kW (400.00 HP), first registration: 08/2007, fuel type: diesel, axle configuration: 8x4, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space length: 6,800 mm, Year of construction: 2007, Equipment: ABS, retarder, 8x4 Euro 5 Manual transmission Tridem 4th axle is steering axle and lift axle Wheelbase 3.80m Chsdpfx Aerdd Aljhmoc Length of loading area: 6.80m Technically in good working order and ready to drive

Condition: used, Technical details: pressure: 200 t stroke: ca. 200mm mm table surface area: L:1200xH:450 mm jaw width: 1000x200 mm total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control accessories: - div. limit stops, tools, try square and marking gauges i.D. Codpfxeu Nfrpo Ahmohc *

Condition: used, total length: 3,800 mm, total width: 1,650 mm, total height: 2,400 mm, Colour: Green Empty weight: 3.500 kg - Details: - └ Description: The plates need to be repaired - Documentation available: No - CE certificate present: No - Main motor power [kW]: 2.2 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 450 - Total stroke [mm]: 450 - Number of work zones [pcs]: 1 Chodpfx Ahjztc R Aomec - Number of levels [pcs]: 1 - Plate material: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 70 - Heating boiler present: Yes - Heating type: Oil heated - Max. temperature [°C]: 120 - Top/bottom separately heated: Yes - Voltage [V]: 400 - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 3800mm x 1650mm x 2400mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, functionality: fully functional, power: 8.5 kW (11.56 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 110 t, oil tank capacity: 200 l, total length: 3,850 mm, total width: 1,650 mm, total height: 2,680 mm, overall weight: 7,500 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, MACHINE IN STOCK – AVAILABLE FOR IMMEDIATE DISPATCH! DELIVERY AVAILABLE THROUGHOUT EUROPE – WE CAN ARRANGE TRANSPORT DIRECTLY TO YOUR DESTINATION AT AN ADDITIONAL COST. CNC PRESS BRAKE SPB 110T × 3200 – HACO 70S – 4+1 AXES The SPB 110T × 3200 is a professional electro-hydraulic CNC press brake with a bending force of 110 tons and a working length of 3200 mm. Designed for precise sheet-metal bending in both individual and series production. The electro-hydraulic servo synchronization system and linear scales monitoring the ram position provide high accuracy, stability and repeatability. The machine is equipped with high-quality hydraulic, electrical and drive components from recognized manufacturers. HACO 70S CNC CONTROL – 4+1 AXES Chedpfx Ahey D Nvismec • Y1/Y2 – independent control of the left and right sides of the ram • X – precise backgauge positioning • R – vertical adjustment of the backgauge fingers • V – automatic CNC table crowning compensation TECHNICAL DATA • Bending force: 1100 kN / 110 T • Working length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 400 mm • Ram stroke: 200 mm • Maximum opening height: 480 mm • Controlled axes: Y1, Y2, X, R + V (4+1) • CNC controller: HACO 70S • Motor power: 8.5 kW • Fast approach speed: 180 mm/s • Bending speed: 13 mm/s • Return speed: 170 mm/s • Dimensions: 3850 × 1650 × 2680 mm PREMIUM COMPONENTS • CNC control system – HACO 70S • Servo motor and drive – INOVANCE / ESTUN • Main servo motor – INOVANCE / ESTUN • Main hydraulic valve – HACO + Rexroth • Hydraulic pump – Rexroth / HYTEK (USA SUNNY) • Hydraulic cylinders – HONGWEI / WUYANG • Backgauge ball screw – TAIWAN • Linear guides – TAIWAN • Hydraulic fittings – Germany EMB • Cylinder seals – Japan NOK • Linear scales – HACO • Main electrical components – Schneider • Laser safety protection – Italy DSP • Rear safety light curtain – LNTECH • Push-button quick tool clamping system • Foot pedal control ACCURACY • Ram positioning repeatability: ±0.01 mm • Ram positioning accuracy: ±0.02 mm • Backgauge repeatability: ±0.02 mm • Bending straightness: 0.3 mm / 1 m • Bending angle accuracy: ±1–1.5° • Linear scale resolution: 0.005 mm EQUIPMENT • Electro-hydraulic servo synchronization system • CNC automatic table crowning compensation • Backgauge with linear guides and ball screw • Adjustable front material supports • Quick tool clamping system • V8–V12 tooling set The upper tool is segmented into 835 mm sections, with one section additionally divided into shorter segments, providing greater flexibility when bending complex workpieces. The SPB 110T × 3200 combines advanced 4+1-axis CNC control, high positioning accuracy and quality components from recognized manufacturers, providing efficient, precise and repeatable performance for professional sheet-metal fabrication. European delivery can be arranged directly to the customer's destination at an additional cost. Please contact us with your delivery address for an individual transport quotation.

Condition: used, Year of construction: 1981, Technical details: pressure: 40 t Chedpfx Asyk Utlshmjc

Condition: good (used), Year of construction: 1980, Straightening force: 100 t Chedpfx Aovgcpcjhmoc Thrust: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pillar speed up: 206 mm/s Pillar speed down: 68 mm/s Hydraulic drive: 380 V, 15 kW Space required: 3500 x 1650 x 2760 mm Weight: 5500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 7,400 kg, feed length X-axis: 600 mm, feed length Y-axis: 120 mm, spindle motor power: 11,000 W, product height (max.): 390 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC PRESS BRAKE MTP 125×3200 – 125 T – MTP-3212 – 4 AXES Y1, Y2, X + V Cjdpfx Ahjzg H Ewomehc The brand-new MTP 125×3200 Hydraulic CNC Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets up to 6 mm thick. Thanks to its advanced CNC control system, heavy-duty welded frame, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (Y1, Y2, X + V), ensuring exceptional accuracy, repeatability, and fast production setup. STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Independently servo-driven Y1 and Y2 axes • Servo-driven X-axis (back gauge) • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ERGONOMICS & SAFETY Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual TECHNICAL SPECIFICATIONS • Maximum sheet thickness: up to 6 mm • Pressing force: 125 T • Maximum bending length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: Y1, Y2, X + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3870 × 1550 × 2400 mm • Machine weight: 7,400 kg TECHNICAL SUPPORT We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: good (used), Year of construction: 1990, power: 1.4 kW (1.90 HP), pressing force: 16 t, stroke length: 200 mm, table width: 300 mm, table length: 4,700 mm, table height: 850 mm, throat depth: 300 mm, total length: 4,700 mm, total width: 1,600 mm, total height: 2,200 mm, overall weight: 2,800 kg, Straightening press for bars and tubes, pressing force 16 tons, press element L = 1500 mm + 2 attachment elements, each 1600 mm long, each with 1 tailstock, with numerous support blocks and plungers. Chodpfszwgypjx Ahmec

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, operating speed: 80 mm/s, oil tank capacity: 200 l, total length: 3,300 mm, total width: 1,800 mm, total height: 2,700 mm, overall weight: 11,400 kg, feed length X-axis: 600 mm, feed length Y-axis: 200 mm, spindle motor power: 15,000 W, product height (max.): 480 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC PRESS BRAKE MTP 200×3200 – 200 T – MTP-3212 – 4 AXES Y1, Y2, X + V The brand-new MTP 200×3200 Hydraulic CNC Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets up to 8 mm thick. Thanks to its advanced CNC control system, heavy-duty welded frame, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (Y1, Y2, X + V), ensuring exceptional accuracy, repeatability, and fast production setup. STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Independently servo-driven Y1 and Y2 axes • Servo-driven X-axis (back gauge) • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ERGONOMICS & SAFETY Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual TECHNICAL SPECIFICATIONS • Maximum sheet thickness: up to 8 mm • Pressing force: 200 T • Maximum bending length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 200 mm • Maximum opening height: 480 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: Y1, Y2, X + V • Main motor power: 15 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3300 × 1800 × 2700 mm • Machine weight: 11,400 kg TECHNICAL SUPPORT We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Chjdpfjzg Hzxjx Ahmsc Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 300 mm, stroke length: 350 mm, bending angle (max.): 180 °, pressing force: 82 t, sheet thickness steel (max.): 30 mm, sheet thickness copper (max.): 30 mm, lifting speed: 10 mm/s, bending force (max.): 82 t, Stierli bender 820HE Horizontal bending and straightening machine, with manual control and stroke fine adjustment system STRAIGHTENING with this horizontal press: Fast and precise straightening for welding parts, profiles, beams, sheets, pipes, flat steel, etc.... Csdpjgqfmnjfx Ahmshc BENDING with this horizontalpress: Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 82 tons Tool height 300 mm Stroke 0-300 mm stepless Bending capacity 300x20mm (up to 300x30 with large V-block) S235 Straightening power for HEA260 Bending and straightening program via selector switch Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new