Used Gilson Pipetman L P20L 2-20Ul Single Channel Pipette Light Yellow for sale (108,136)

Condition: used, clear span: 2,705 mm, load per truss pair (max.): 2,400 kg, Technical specifications for the pallet racking crossbar: Racking system: Jung Heinrich Type: Esmena Included in the scope of delivery: 01x Pallet racking crossbar, used Material color: RAL1007 yellow Crossbar type: N140x40 SEG4 Box profile: 140 x 40 mm Clip: 4 hooks Clear width: 2,705 mm Maximum load per pair of crossbars: 2,400 kg with evenly distributed load 02x Locking pin, used Design: Fully galvanized For securing the longitudinal beams Hodez A Dyuspfx Aqgefn against unintentional lifting out General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch Hfodpsg Ewwrjfx Aqgsn -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements 2 grinding wheels included 1 L of ES12 emulsifying oil User manual Technical specifications Parameter Value Hfodpfx Aqszwk D Sjgon Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2009, total length: 13,900 mm, total width: 2,550 mm, suspension: air, tire size: 385/65/22.5, wheelbase: 9,000 mm, color: white, Year of construction: 2009, Equipment: ABS, = Additional options and accessories = - Disc brakes = Further information = Axle configuration Tyre size: 385/65/22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 20%; Tyre tread right: 20% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 10%; Tyre tread right: 10% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Hfsdoy Dftwspfx Aqgon Weights Unladen weight: 7,596 kg Payload: 31,404 kg Gross vehicle weight: 39,000 kg Condition Technical condition: very good Visual condition: very good Further information Please contact Bas Wolfs or Bas Wolfs for more information.

Year of construction: 2007, condition: refurbished (used), We have a Mueller Apparatebau single sheet feeder transactional channel available. Meant for feeding - reading a reading code - collating - folding A4 documents and place it into a Buhrs ITM inserter but you can also use it stand-alone or connect it to a other brand machine. Hfsdpfed Ddkbjx Aqgen

Year of construction: 2005, condition: reconditioned (used), We have a Mueller Apparatebau single sheet feeder transactional channel available. Meant for feeding - reading a reading code - collating - folding A4 documents and place it into a Buhrs ITM inserter. Hedpfed A Ud Usx Aqgsfn

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. Hedpfeq Nd Rbjx Aqgsfn 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: used, axle configuration: 2 axles, first registration: 04/2007, loading space length: 13,450 mm, loading space width: 2,470 mm, loading space height: 2,450 mm, total length: 14,020 mm, total width: 2,600 mm, suspension: air, tire size: 295/60, tire condition: 30 %, wheelbase: 9,100 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Air Suspension - Drum brakes = More information = Hodpfx Aqozvdnujgjfn Axle configuration Tyre size: 295/60 Make axles: BPW Tyre profile: 30% Brakes: drum brakes Suspension: air suspension Rear axle 1: Steering Weights Empty weight: 10.920 kg Carrying capacity: 22.080 kg GVW: 33.000 kg Functional Cooling engine: diesel Identification Registration number: OJ-28-TJ

Condition: like new (used), machine/vehicle number: 00399, LT Industries – Quantum 1200 Plus, model 20 channel multiplexer • Real-Time Multi-Constituent Process Analyzers • Multipoint, Fiber Optic Multiplexing Capability • Shock and Vibration Free The LT Industries Quantum 1200 Process Analyzer Series is comprised of the rugged, rapid scanning Quantum 2000 and 1200 Systems which were developed for both Pilot Plant and dedicated stand-alone installations in closed-loop-control of manufacturing processes. Using rugged, proven technology, LT Industries' systems enhance quality control, increase yield and reduce waste by providing real-time analysis. The sampling process is non-destructive and non-extractive, involving none of the sample preparation required by other testing technologies. LT Industries' Quantum 1200 Process Analyzers provide continuous multiple analyses in real-time. These analyses have proven to be as accurate as traditional lab testing for liquids, powders, solids, slurries, pastes, emulsions and/or suspensions. These systems deliver the real-time data output that has made LT Industries a recognized NIR leader in process measurement for control. Artisan Scientific Corporation dba Artisan Technology Group is not affiliated with or a distributor for LT Industries. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder. T Industries' Quantum 1200 Process Analyzers provide continuous multiple analyses in real-time. These analyses have proven to be as accurate as traditional lab testing for liquids, powders, solids, slurries, pastes, emulsions and/or suspensions. Our systems deliver the real-time data out-put that has made LT Industries a recognized NIR leader in process measurement for control. The Quantum 1200 Process Analyzer Series combines analytical power and intelligence with ease of use in an integrated systems package. A pre-dispersed, monochromatic beam of light travels through the patented harmonic drive grating mechanism, where is it separated into discrete wavelengths and sent through a fibre optic link to illuminate the sample. The light transmitted back through the fibre optic link is converted into an electrical signal, which is compared by the microprocessor to the calibrated responses in memory. The data output results of this comparison are then used for process control Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment Delivery condition, FCA: Oradea/Romania We can deliver/export everywhere in the World. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Hfodpfxsg Tdwvo Aqgsn Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035389, empty load weight: 3,160 kg, maximum load weight: 34,840 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 90 %, color: grey, The images are archive images! The vehicle may still be in use! Fine-grained steel welded construction, fifth wheel coupling with interchangeable 2" kingpin (Chassis prepared for subsequent retrofitting, drip tray, 4 x hose holders, footboards, Fliegl standard) Container fittings: 1 x 20 ft in the center (or swap body container 7.15 / 7.45 / 7.82), not retractable at the front, the pivot pins of the container locking mechanism in the longer version. 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Chocks with holder Side underrun protection Rear underrun protection with deep step for easier access + footboard inside Semi-elliptical fenders with anti-spray flaps according to EC Axles + Suspension BPW or SAF disc brake axles at the manufacturer's choice, with 430 mm disc diameter, "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line Hfjdpfsy Tvuwox Aqgjn 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, the truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, (Note! with certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable additional LED work lights at the rear, switched via reversing light Operating instructions This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration/Signage Germany with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side, yellow at the rear The images are archive images! The vehicle may still be in use!

Condition: used, Year of construction: 2004, machine/vehicle number: 114465, For sale Used Konecrane single girder suspension crane 9,334 mm x 2t We can supply the cranes including: * assembly and inspection * power rails * radio control * master controls Jan Reiling B.V. also supplies new DEMAG cranes completely customized at very competitive prices. * overhead cranes * Suspended cranes * Slewing cranes * KBK rails cranes * boat elevators Hfsdsuvikzopfx Aqgjn All our new and used cranes which we deliver assembled are delivered including warranty! In addition, we have our own stock of about 15,000 Demag parts.

Condition: new, Year of construction: 2026, overall weight: 5,550 kg, rotor diameter: 520 mm, number of blades: 82, total length: 2,260 mm, total height: 2,650 mm, total width: 3,000 mm, rotor length: 1,200 mm, rotor width: 350 mm, power: 50 kW (67.98 HP), warranty duration: 12 months, blade width: 50 mm, blade diameter: 50 mm, MIZAR SSH Series - Single Shaft Shredder / Einwellenzerkleinerer for Cables, Plastics & E-Waste Controlled Size Reduction with Intelligent Feeding System The MIZAR SSH Series is engineered for efficient and controlled shredding of a wide range of materials including cables, textiles, plastics, tires, electronic scrap, and various metal types. Designed for reliability, flexibility, and consistent output size, SSH shredders are ideal for recycling facilities requiring uniform material preparation before granulation or further processing. SMART SHREDDING TECHNOLOGY & ADVANTAGES • Single Rotor – Maximum Control: Customized high-alloy wear-resistant steel blades mounted on a robust single shaft ensure aggressive intake and efficient size reduction across mixed material streams. • Programmable Hydraulic Pusher: An intelligent hydraulic feeding system continuously pushes material toward the rotor, optimizing throughput and preventing idle rotation. • Automatic Anti-Jam System: In case of overload or blockage, the rotor automatically reverses direction. This protects the machine and ensures uninterrupted operation. Hedpfx Aeyyupgsqgsfn • Screen-Controlled Output Size: A heavy-duty screen located beneath the rotor determines the final particle size. Material remains inside the chamber until it reaches the required dimensions, ensuring a homogeneous output. • Industrial-Grade Components: Siemens/WEG motors, SKF/FAG bearings, and Schneider or ABB electrical systems ensure durability and long service intervals. Fully CE-certified for international compliance. APPLICATION AREAS • Cable Recycling: Copper and aluminum cables, wiring harnesses. • Plastic Materials: HDPE, PET, film, lumps, injection waste. • Electronic Scrap (WEEE): PCBs, electronic components, mixed e-waste. • Textile & Tires: Industrial textile scrap, fabric waste, car and light truck tires (pre-cut). • Metals: Aluminum scrap, radiators, light metal fractions. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration and screen size based on your material) • SSH S1: Compact solution for medium-scale operations. • SSH M1: Balanced performance for diverse recycling needs. • SSH L1: High-capacity industrial model for continuous operation. • SSH XL1: Heavy-duty configuration for the most demanding throughput requirements. Why Mizar SSH? • Precise output size control via interchangeable screens • Stable and intelligent hydraulic feeding system • Reduced downtime with automatic reverse function • Low maintenance design with accessible rotor chamber • Seamless integration into complete recycling lines Need a tailored shredding solution? Contact us for a customized quotation, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment Excellent condition Hfsdpfsytgu Tsx Aqgon Height min: 1050 mm Height max: 2200 mm Total height: 3250 mm Rotational speed: 0.2 - 1.0 rpm Torque: 24,000 Nm Lifting speed: 1.5 m/min Handheld remote control

Condition: new, Year of construction: 2026, overall weight: 4,750 kg, rotor diameter: 350 mm, number of blades: 62, total length: 1,850 mm, total height: 2,170 mm, total width: 2,670 mm, rotor length: 920 mm, rotor width: 350 mm, power: 50 kW (67.98 HP), warranty duration: 12 months, blade width: 50 mm, blade diameter: 50 mm, MIZAR SSH Series - Single Shaft Shredder / Einwellenzerkleinerer for Cables, Plastics & E-Waste Controlled Size Reduction with Intelligent Feeding System The MIZAR SSH Series is engineered for efficient and controlled shredding of a wide range of materials including cables, textiles, plastics, tires, electronic scrap, and various metal types. Designed for reliability, flexibility, and consistent output size, SSH shredders are ideal for recycling facilities requiring uniform material preparation before granulation or further processing. SMART SHREDDING TECHNOLOGY & ADVANTAGES • Single Rotor – Maximum Control: Customized high-alloy wear-resistant steel blades mounted on a robust single shaft ensure aggressive intake and efficient size reduction across mixed material streams. • Programmable Hydraulic Pusher: An intelligent hydraulic feeding system continuously pushes material toward the rotor, optimizing throughput and preventing idle rotation. • Automatic Anti-Jam System: In case of overload or blockage, the rotor automatically reverses direction. This protects the machine and ensures uninterrupted operation. • Screen-Controlled Output Size: A heavy-duty screen located beneath the rotor determines the final particle size. Material remains inside the chamber until it reaches the required dimensions, ensuring a homogeneous output. • Industrial-Grade Components: Siemens/WEG motors, SKF/FAG bearings, and Schneider or ABB electrical systems ensure durability and long service intervals. Fully CE-certified for international compliance. APPLICATION AREAS • Cable Recycling: Copper and aluminum cables, wiring harnesses. Hodpfx Aeg Dcq Teqgefn • Plastic Materials: HDPE, PET, film, lumps, injection waste. • Electronic Scrap (WEEE): PCBs, electronic components, mixed e-waste. • Textile & Tires: Industrial textile scrap, fabric waste, car and light truck tires (pre-cut). • Metals: Aluminum scrap, radiators, light metal fractions. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration and screen size based on your material) • SSH S1: Compact solution for medium-scale operations. • SSH M1: Balanced performance for diverse recycling needs. • SSH L1: High-capacity industrial model for continuous operation. • SSH XL1: Heavy-duty configuration for the most demanding throughput requirements. Why Mizar SSH? • Precise output size control via interchangeable screens • Stable and intelligent hydraulic feeding system • Reduced downtime with automatic reverse function • Low maintenance design with accessible rotor chamber • Seamless integration into complete recycling lines Need a tailored shredding solution? Contact us for a customized quotation, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: new, Siemens 6SL3126-1TE31-3AA3 Single Motor Module 132A, E-Stand: G, SN:T-R46286402, unused in opened original packaging, 100% functional, scope of delivery as per photos Hjdoxahbaepfx Aqgofn

Condition: new, Year of construction: 2026, overall weight: 2,800 kg, rotor diameter: 350 mm, number of blades: 42, total length: 1,460 mm, total height: 1,800 mm, total width: 1,950 mm, rotor length: 620 mm, rotor width: 350 mm, power: 35 kW (47.59 HP), warranty duration: 12 months, blade width: 50 mm, blade diameter: 50 mm, MIZAR SSH Series - Single Shaft Shredder / Einwellenzerkleinerer for Cables, Plastics & E-Waste Controlled Size Reduction with Intelligent Feeding System The MIZAR SSH Series is engineered for efficient and controlled shredding of a wide range of materials including cables, textiles, plastics, tires, electronic scrap, and various metal types. Designed for reliability, flexibility, and consistent output size, SSH shredders are ideal for recycling facilities requiring uniform material preparation before granulation or further processing. SMART SHREDDING TECHNOLOGY & ADVANTAGES • Single Rotor – Maximum Control: Customized high-alloy wear-resistant steel blades mounted on a robust single shaft ensure aggressive intake and efficient size reduction across mixed material streams. • Programmable Hydraulic Pusher: An intelligent hydraulic feeding system continuously pushes material toward the rotor, optimizing throughput and preventing idle rotation. • Automatic Anti-Jam System: In case of overload or blockage, the rotor automatically reverses direction. This protects the machine and ensures uninterrupted operation. • Screen-Controlled Output Size: A heavy-duty screen located beneath the rotor determines the final particle size. Material remains inside the chamber until it reaches the required dimensions, ensuring a homogeneous output. • Industrial-Grade Components: Siemens/WEG motors, SKF/FAG bearings, and Schneider or ABB electrical systems ensure durability and long service intervals. Fully CE-certified for international compliance. APPLICATION AREAS • Cable Recycling: Copper and aluminum cables, wiring harnesses. • Plastic Materials: HDPE, PET, film, lumps, injection waste. • Electronic Scrap (WEEE): PCBs, electronic components, mixed e-waste. Hjdeyyun Aopfx Aqgefn • Textile & Tires: Industrial textile scrap, fabric waste, car and light truck tires (pre-cut). • Metals: Aluminum scrap, radiators, light metal fractions. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration and screen size based on your material) • SSH S1: Compact solution for medium-scale operations. • SSH M1: Balanced performance for diverse recycling needs. • SSH L1: High-capacity industrial model for continuous operation. • SSH XL1: Heavy-duty configuration for the most demanding throughput requirements. Why Mizar SSH? • Precise output size control via interchangeable screens • Stable and intelligent hydraulic feeding system • Reduced downtime with automatic reverse function • Low maintenance design with accessible rotor chamber • Seamless integration into complete recycling lines Need a tailored shredding solution? Contact us for a customized quotation, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: ready for operation (used), Siemens 6SL3120-1TE24-5AC0 Single Motor Module 45A Version: C SN:T-P36289842, as good as new, never in use, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Hfodexag Uxepfx Aqgsn

Condition: new, Siemens 6SL3120-1TE31-3AA3 Single Motor Module SN:T-P56354698, unused in original packaging, 100% functional, scope of delivery as per photos. Hodpfjx Dxiiox Aqgjfn

Condition: used, mileage: 632,811 km, power: 265 kW (360.30 HP), first registration: 05/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, color: green, gearing type: automatic, emission class: euro6, loading space volume: 47 m³, loading space length: 7,400 mm, loading space width: 2,480 mm, loading space height: 2,540 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, * ANTOS 1836 L refrigerated box truck, 7.40 m, with folding tail lift, BÄR, 2,000 kg capacity * CARRIER SYBERIA, hydraulically driven, in-motion refrigeration * Engine OM 470, R6, 10.7 l, 265 kW (360 hp) Sale only in conjunction with trailer, internal number 4812. Total price, net: €39,800,-- + * Vehicle number for customer inquiries: 4811 * Engine version Euro VI, with OBD-C * Predictive Powertrain Control * Active Brake Assist * Differential lock, rear axle * Air conditioning * Lane Keeping Assist * Tail lift * Driver Attention Assist * High Performance Engine Brake * Air suspension, rear axle * Electronic Stability Program (ESP) * Trailer brake connection, rear, Duo-Matic+Standard * Trailer brake, 2-line, brake connections left * Trailer socket 24 V, 15-pin * Antos * Electronic braking system with ABS and ASR * Driver's air-suspended seat, comfort * Gearbox G 211-12/14,93-1,0 * Comfort central locking system * Mercedes PowerShift 3 * Reversing warning system, combined with hazard warning lights * External sun visor, transparent * Fuel tank 390 l, left, 650 x 565 x 1250 mm, aluminum * Cruise control * Storage compartment, high, on engine tunnel * AdBlue tank 60 l, left * Roof hatch/ventilation flap, roof * Weight variant 18.0 t (7.5/11.5) * Heater, electronic compressed air supply unit * M-cab ClassicSpace, 2.30 m, tunnel 320 mm * Engine OM470, R6, 10.7 l, 265 kW (360 PS), 1800 Nm * Wheelbase 5500 mm * Tires, tubeless, 315/70 R 22.5, rear axle * Tires, tubeless, 315/70 R 22.5, front/steerable axle/tag axle * Stabilizer, front axle * Preparation for toll collection * Engine PTO, rear, hydraulic pump ISO 7653D * Tachograph, digital, EC, speed, ADR * Preparation for low fifth wheel coupling * Environmental badge (green) * Two-seater * Serviced according to maintenance schedule * 2/3-door No liability for printing and typographical errors. Sale only to commercial customers. Subject to errors and prior sale. * TOP SERVICE + QUALITY * We can gladly provide you with a LEASING/FINANCING/HIRE PURCHASE offer. Guarantee insurance available on request from the insurance company. * TÜV / UVV tail lift inspection / tachograph inspection and installation of OBU device by our local partners. * Customs license plates for 30 days. All customs documents for export are available, but must be requested individually. * Toll payments for Toll-Collect can be arranged in-house. * Free transfer from Stuttgart Airport or Metzingen (Württ.) train station. Hfsdez Awy Djpfx Aqgen * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WhatsApp number: * ---- Visit us on our website at: * Constantly over 200 vehicles in stock.

Condition: used, mileage: 635,019 km, power: 243 kW (330.39 HP), first registration: 01/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, Internal vehicle number: VTC30069 Hfodpszx Izwofx Aqgon For more information, please contact: Luis Lucena Viktoria Sologubova Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES LTD. We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, Two-stage side channel compressor The VASF 2.50/2-0.AC230 is a flow machine with a VARIAIR frequency inverter, offering high performance with 100% oil-free and contact-free operation. These side channel blowers are low-maintenance, highly efficient, and require minimal servicing. Features VARIAIR frequency inverter Contact-free compression Compact design Inlet and outlet silencers Sealed bearings eliminate the need for lubrication Vibration dampers for horizontal installation Additional cooler Advantages Hedpfx Aoyk Dkmoqgofn Precise volume flow through speed control Low operating and exhaust temperatures Low-noise operation Specifications VASF 2.50/2-0.AC230 Volume flow: 24 m³/h Relative pressure: +560 mbar Inverter power: 0.65 kW Hz: 50…300 Hz Sound level: 61 dB(A) Weight: 12.3 kg with motor & inverter You can find more new and used items in our shop! International shipping costs available upon request!

Condition: new, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,900 mm, total width: 2,550 mm, total height: 955 mm, Year of construction: 2025, Equipment: ABS, rapid+ 2-axle short timber trailer A2K-LZ59-L-ALPHA * Only 3,200 kg unladen weight * Air suspension * 2 single axles, manufacturer SAF, 10 tons with disc brakes, including safety cables * Tires: 265/70 R 19.5 on Alcoa aluminum rims (Dura-Bright) * Aluminum air tank * EBS braking system * Full LED lighting * 4x LED work lights (1,800 lumens) * 1x grapple cable * Paint: frame/bolster color graphite black * Drawbar type GNZ 27, drawbar eye Ø 40 mm + standing area on drawbar * Lateral impact protection according to ECE?R 73 * For the transport of 2 x 3m / 1 x 4m / 1 x 5m / 1 x 6m timber * 2x ExTe D7 + 2x ExTe D10 bolsters and stakes DOLL lightweight construction: This DOLL 2-axle trailer represents modern vehicle construction and efficient timber transport. The trailer offers the proven DOLL quality – practical and safe. Plus TÜV inspection. Ex works Mildenau. All prices plus registration and legally applicable VAT. Subject to changes and prior sale. Further information on request. Information without guarantee. Illustrations may differ from the original. Contact: Hfjdpfoh Hclrsx Aqgjn Niclas Lott Tel.:

Condition: new, Year of construction: 2026, machine/vehicle number: K00630, functionality: fully functional, operating hours: 5 h, power: 2.2 kW (2.99 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 600 mm, cutting width (max.): 430 mm, control type: PLC-controlled, pivoting range: 45,060 °, total height: 2,250 mm, total length: 2,150 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, When it comes to precise miter cuts, high production volumes, and economical manufacturing, the BAUER VG 450 L ZA-2 is the ideal solution. This fully automatic miter band saw combines the proven sawing technology of the VG 450 L with a powerful material feed system, enabling virtually operator-free sawing operation. The integrated automatic material feed system independently transports the material to the sawing station and positions it precisely for each individual cut. At the same time, the machine automatically monitors the end of the material. The sawing process is completed reliably. Hodpfozqdv Ijx Aqgefn A particular highlight is the ability to produce frame components with miter cuts fully automatically. Different cutting angles are executed precisely and with high repeatability, making the VG 450 L ZA-2 ideal for the production of windows, doors, facades, steel structures, and metalwork. Angle profiles, rectangular tubes, square tubes, round tubes, and solid materials can also be processed reliably and economically. The hydraulic miter adjustment allows for cutting angles from 45° left to 60° right, enabling numerous frame constructions to be produced without manual adjustments.

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, 3-axis rotary and tilt positioner, 2000 kg load capacity, clamping plate diameter 0.8 meters. Proven in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in aerospace and energy technology. Suitable for welding, assembly, machining, etc. Featuring a stable and robust design, flexible positioning across three axes (including overhead), and easy operation, these positioners simplify welding, assembly, and handling of large workpieces. Advantages: - Faster production, increased productivity - Optimal workpiece positioning improves weld quality and allows for higher deposition rates - Enhanced safety; dangerous crane handling is significantly reduced - Positioning on up to three axes simultaneously without cumbersome re-clamping - Simple operation and ergonomic design protect and relieve the operator - Flexibility through modular adaptability and custom special versions available Operating principle: Hjdjxbhp Hjpfx Aqgefn The rotary arm axis is positioned above the clamping plate, so the rotary arm acts as a counterweight to the workpiece. As a result, these machines are much more powerful than standard rotary-tilt tables or rotary-tilt positioners. This principle enables the handling of the specified loads in any position. Endless rotation of the two rotary axes and additional height adjustment allow for all workpiece orientations (including overhead). Turntable speed is infinitely variable from 0.05 to 0.6 rpm. 2000 kg load capacity. - Wireless hand remote control - Continuous 360° rotation - Continuous 360° tilting - Stroke: 1000 - 1500 mm - Arm reach radius: 1.2 meters

Condition: used, color: other, first registration: 02/2000, Year of construction: 2000, Serial number: HSF 9210 Hsdpfx Aovy Uqroqgefn We have a stock of >100 axles. Please contact us if you can't find what you are looking for.