Used Grant Instruments Sub Aqua 5 Plus for sale (61,905)

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours Lredpfsy Nd Hyex Akuol • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: used, functionality: fully functional, machine/vehicle number: 5554, Year of construction: 2019, operating hours: 3,488 h, load capacity: 5,000 kg, lifting height: 21,000 mm, fuel type: diesel, mast type: telescopic, fork length: 1,200 mm, drive type: Diesel, Rotating telehandler Chassis number: 5554 Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: Good Lrodpfx Aoxbi Azokusl Front tyre type: Pneumatic Rear tyre type: Pneumatic Description: Year of manufacture: 11/2019; Model year: 2020

Condition: excellent (used), Baler Hsm V-Press 825 plus Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Loading height: 958 mm Loading opening width x height: 1195 x 530 mm Bale length x width x height: 1200 x 780 x 700 mm Bale length x width x height: 1200 x 780 x 700 mm Machine width x depth x height: 1700 x 1046 x 2370 mm Ljdpjv Akcisfx Akujrl Machine weight: 1063 kg Type of consumables: strapping tape Compressed material: foil, mixed paper, cardboard, die-cutter waste, clothing Years 2012-2014 price 6000eur Baler Hsm V- Pres 825 pro 2019-2021 costs 9,000eur

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, number of axes: 6, This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Additional equipment • Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations • B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range • Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners • Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts • Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter • Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator • Hydraulic unit / Machine light / Interface for foot switch / Signal lamp • Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun • Clamping device for main spindle: Hainbuch BZI 80 centre pull / Lsdpfey Hty Djx Akuorl Machine Benefits Technical Machine Benefits • Counter spindle: 22 kw / counter spindle: 0-7000 rpm • Main spindle: kk 6 (passage 65 mm) / counter spindle: kk 6 • Y-axis travel range: +/- 50 mm • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck 210 mm • Approx. 40 capto c4 holders for milling spindle • Loader lm 1200 • Machine does not have shopturn programming. It must be programmed using iso code, whereby simple cycles are available for drilling, milling, swiveling, etc. • 12-station turret and a milling spindle

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, total height: 2,600 mm, total length: 2,200 mm, total width: 2,100 mm, overall weight: 3,600 kg, spindle speed (min.): 10,000 rpm, spindle speed (max.): 10,000 rpm, For sale is a high-quality and reliable CNC machining center of the type Hommel Unverzagt UVA 25 PLUS. This machine stands out for its compact design combined with high stability, making it the ideal solution for workshops that value precision and German engineering. Manufacturer: Hommel Unverzagt GmbH Model: UVA 25 PLUS Machine type: Vertical machining center Weight: approx. 3,600 kg (according to nameplate) Year of manufacture: 2008 Tool holder: SK 40 or BT 40 Control: SINUMERIK 828D PPU 240.2 Includes active cooling unit: Daikin oil cooler Interfaces: Connections for Profinet (PN), Ethernet (LAN), USB, and RS232 port. X-axis: approx. 725 mm Y-axis: approx. 460 mm Z-axis: approx. 460 mm Table surface: 760 x 420 mm Machine dimensions: approx. 2,200 mm x 2,100 mm x 2,600 mm Footprint: 3,500 mm x 3,000 mm Transport and loading can be organized throughout Europe at extra cost, upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale BUYING & SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For further information or to contact us, please visit our website. Lrsdpfey Htd Njx Akusl

Condition: used, functionality: fully functional, power: 92 kW (125.09 HP), fuel type: diesel, color: yellow, overall weight: 14,800 kg, tire size: 10.00 x 20, number of seats: 1, Year of construction: 2022, machine/vehicle number: 2477168, Equipment: all wheel drive, cabin, Year of manufacture: 2022 Engine: 92 kW (Isuzu) Weight: 14.8 t Dimensions (L x W x H): 7.89 x 2.41 x 3.04 m Reach: 9.24 m Digging depth: 5.93 m Tyres: 10.00 x 20 Lsdpjy Hhkdjfx Akusrl Displacement: 2.99 l Boom: VA

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency inverter Pressure transmitter for demand-based control Pre-separator integrated Extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Extremely efficient: Energy-efficient IE3-class drives. Safe in case of emergency: Service-friendly extinguishing system. Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options, such as machine recognition, damper control, and frequency-controlled operation, to name just a few. No mess: Collection container with inspection viewing window. Practical down to the last detail: Container locking with ergonomically shaped clamping lever. Easy retrofitting: Can be converted for discharge via briquette press or rotary valve. - high extraction capacity - minimal space requirement - 100% air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimal filter cleaning - minimal noise level - optional: patented fill level monitoring - service-friendly, certified fire extinguishing system - dust barrier for dust-free container change - (optional: safety interlock for containers) - modules freely configurable and expandable ----- Technical Data ----- Extraction nozzle Ø: 355 mm Nominal air flow: 7,127 m³/h Max. air flow: 10,000 m³/h Max. negative pressure: 3,347 Pa Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Sound pressure level: 73 dB(A) Weight: 1,064 kg according to: GS - HO - 07 Lsdpfowzyh Rex Akusrl

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, controller manufacturer: FANUC, controller model: 31i-B5, overall weight: 2,250 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis FANUC Robodrill D21MIB 5ADV Plus was manufactured in 2023. It features a high-torque spindle capable of 10,000 rpm and a robust automatic oil lubrication system. The machine includes a center-through coolant system and a servo turret for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill D21MIB 5ADV Plus vertical machining centre we have for sale. Contact us for further details. • Mechanical unit: D21MiB5 • Spindle: BIG-10000-MAS-CTC • Spindle motor: high torque CTC • Center-through coolant system (CTC) • Air blow center-through • Flood coolant piping • CTC coolant piping • Automatic oil lubrication system • Servo turret: BT-T21-MAS • Compact flash card adapter • Operator panel: English • Internal LED lighting • Designation of control axes • Designation of two additional axes • Parameter setting: 4th axis possible • Parameter setting: 5th axis possible • High column: 300 mm • Spindle head full cover • Z-axis single plate cover • Splash protection enclosure • Air-through CTC kit • Transformer: 20 kVA IP23 Lrjdpfey E Iknsx Akuol • Base machine only: approx. 2250 kg • Condition: New machine • Warranty: 1 year Additional equipment • Robot interface 2 without hub • Robot connection function • Additional I/O: DI/DO 48/32

Condition: good (used), Year of construction: 2005, In 2022, a new control system was installed for €9,000. X-axis: 2500 Y-axis: 1018 for drilling Y-axis: 1240 for milling Z-axis: 100 Main spindle: 6.6 kW with HSK 63 interface Front tool changer: 5 positions Rear: 5 positions Drilling unit Lodpfx Aeyrmayokusrl Milling unit Grooving saw

Condition: new, Year of construction: 2026, Maximum horizontal cutting length: 4200 mm Maximum vertical cutting height: 2200 mm Maximum horizontal cutting height: 2080 mm Maximum cutting thickness: 60 mm Lrodpfoxga H Iex Akujl Motor power: 5 HP (3.7 kW) Blade diameter: 250 mm Blade speed: 5300 rpm Horizontal digital display Vertical digital display

Condition: used, Year of construction: 2006, functionality: fully functional, Machine identification Model: SCM Sigma Plus 125 P 45 Type: heavy-duty panel saw with lifting platform Manufacturer: SCM Group S.p.A., Italy Serial number: AE/028708 Year of manufacture: 2006 (used machine) Condition: used industrial panel saw Main equipment / configuration Fixed, phenolic-coated front air cushion table with stop Three movable, phenolic-coated air cushion tables Pneumatic automatic alignment device Quick saw blade change system Independent main saw blade lifting THK precision linear guides Four additional clamps in the right-angle alignment zone Lsdey Iwy Dopfx Akusrl Optimized saw blade extension PC operator interface in English

Condition: used, mileage: 40,000 km, power: 103 kW (140.04 HP), first registration: 07/2024, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 4,490 mm, next inspection (TÜV): 05/2028, color: white, emission class: euro6, number of seats: 7, loading space volume: 10.4 m³, loading space length: 3,190 mm, loading space width: 1,780 mm, loading space height: 1,830 mm, construction height: 2,590 mm, working width: 2,040 mm, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, differential lock, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, traction control, trailer coupling, Tow bar up to 3.5 tons (at extra cost). Smartphone navigation possible. Body variant: high roof in vehicle colour, Climatic air conditioning, trailer coupling, central locking with remote control and internal activation, electrically adjustable and heated exterior mirrors, front electric windows, Multi-Function Display Plus, hill start assist, multifunction steering wheel, reversing camera, partition wall, spare wheel with operational tyres, winter tyres, daytime running lights, Composition Colour audio system (radio / SD card interface / USB), touchscreen, Bluetooth hands-free system, multimedia interface with 2 x USB (Type C) in front, mobile online services App-Connect, emergency call system, tyre pressure monitoring system, long wheelbase, heat-insulating glazing, storage package 2, tachometer, driver’s airbag, anti-lock braking system (ABS), Electronic Stability Program (ESP), rear differential lock, comfort seats, centre armrest, height-adjustable comfort driver's seat with armrest and lumbar support, rear headrests, start/stop system, diesel particulate filter, full service history, right sliding door to load/passenger compartment, electronic immobiliser, headlight range control, side marker lights, exterior temperature display, electro-mechanical power steering, paintwork: Candy White, twin passenger seat with storage compartment, hill start/descent assist, storage: 2 DIN slots at front under headliner, cab interior lights: front reading lamp, lockable glovebox, front bumper in grey with trim in body colour, reinforced front axle, fixed ball-head trailer coupling, trailer stabilisation system, cab floor covering: rubber, entry grab handle at rear left C-pillar, entry grab handle at rear right C-pillar, A-pillar grab handles, 2 folding radio keys, seatbelt warning device (driver/passenger side), driver’s cab interior lights: LED, cargo/passenger compartment interior lights: LED, twin-tone horn, 2 x 12V sockets in cab, lashing eyes in cargo area, brake assist (HBA), adjustable steering column, crosswind assist, SCR system (AdBlue technology), body/chassis: standard high-capacity van, wheelbase 4490 mm, drive type: all-wheel drive, 6-speed gearbox, CW-coefficient underbody cover, truck registration, permissible total weight 3.5 t, radiator grille with upper chrome strip, left convex exterior mirror, right convex exterior mirror, twin headlights, LED indicators integrated into exterior mirrors, side marker lights, over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank; we are happy to advise you. This offer is non-binding; no guarantee as to equipment details. Stated features should be checked separately if required. Subject to changes, errors and prior sale. Delivery possible at extra cost. Export licence plates available on site. We accept trade-in of your old vehicle. Retrofit options available for: - Trailer couplings up to 3500 kg - Auxiliary heaters - Monitors for reversing camera and/or smartphone navigation (Android Auto) - Rear view systems with camera - Workshop fittings - Cruise control - Tail lift retrofitting and other custom solutions for your business needs available at extra cost. Lredpfjx I Rtwjx Akusl

Condition: used, Year of construction: 2002, Technical details: x-travel: 505 mm Lsdou S Izcjpfx Akuorl y-travel: 405 mm z-travel: 405 mm measuring range X-axis: 505 mm measuring range Y-axis: 405 mm measuring range Z-axis: 405 mm compressed air: 0,4 MPa voltage: 100/120/220/240 V / Hz total power requirement: 700 Watt machine weight approx.: 0,5 t dimension machine xH: 1,1 x 1,1 x 2,185 m further features: -it is a linear measuring system with resolution 0.0001mm -measuring speed X/Y+Z-axes 430 mm/s -acceleration X/Y+Z-axes 980 mm/s² -measuring table made of granite, size LxW: 638 x 860mm, with workpiece clamp -max. tool size height max. 545mm weight max. 180kg Equipment: -Measuring probe Renishaw TP200 -Computer Fujtsu - Siemens Scenic P; protection class IP30 -without measuring probe -Software available (USB Stick) *

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 196-477 NL, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 400 mm, Machine in excellent condition from a measuring room Ljdeyxxphjpfx Akuorl

Condition: good (used), Year of construction: 2007, operating hours: 4,262 h, functionality: fully functional, machine/vehicle number: R7AV13, turning diameter: 65 mm, Can be powered up, the condition of the bar feeder is unknown, removed from production due to arrival of a new machine. On both turret heads, the use of a driven tool holder is possible in all positions. Ledpsyxxhqefx Akusrl

Condition: used, mileage: 8,900 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,100 kg, first registration: 05/2025, next inspection (TÜV): 01/2028, fuel consumption (urban): 7.4 l/100km, fuel consumption (extra-urban): 7.4 l/100km, fuel consumption (combined): 7.4 l/100km, CO₂ emissions: 194 g/km, emission class: euro6, color: silver, suspension: steel, number of seats: 6, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, VR9 STYLE, E07 hill start assist, E2Q MBUX Augmented Reality for navigation, E7H MBUX Multimedia System High, T56 electric operation for left sliding door, T55 electric operation for right sliding door, JB7 Park Package with reversing camera, Q50 trailer coupling with removable ball head, EY5 Mercedes-Benz emergency call system, BS1 brake calipers with Mercedes-Benz lettering, EY6 breakdown management, B25 electric parking brake, EI0 wireless charging system for mobile devices, LG4 tail, brake, and indicator lights in LED technology, XO7 Mercedes-Benz Mobilo with DSB and GgD, SE5 driver's seat lumbar support, SE4 passenger seat lumbar support, T70 child safety locks on passenger compartment doors, ZC6 sales code 1, T74 entry grab handle, Y10 first aid kit, MJ8 ECO start-stop function, IB6 model series C447 Vito/V-Class, 805 AEJ X4/1, VL2 velour floor mats, H00 warm air duct to passenger compartment, C6L multifunction steering wheel, Z42 registered as a passenger car, C74 illuminated Mercedes-Benz entry badge, J55 seat belt warning device for passenger seat, XA8 weight variant 3,100 kg, EL9 2-way speakers front and rear, SH2 thorax-pelvis sidebag passenger, SH1 thorax-pelvis sidebag driver, SH8 windowbags for driver, passenger and in rear, H20 all-round heat-insulating glass, JW8 ATTENTION ASSIST, Y44 warning triangle, RG7 225/55 R17 tyres, JX2 40,000 km maintenance interval, FP3 mirror package, BH1 HOLD function, WA8 control code factory 157, SZ8 storage net on passenger seat backrest, SZ7 storage net on driver's seat backrest, JH3 communication module (LTE) for digital services, X30 registration. We will gladly provide you with an individual financing or leasing offer and accept your used vehicle in part exchange. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age/mileage; partial repainting was performed during vehicle preparation. No liability for printing or typographical errors. Errors and prior sale excepted. ... more on our homepage Lrjdpfx Aksx S D Hloujl

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 7519.51 € 145.13 € 23 mm MK 3 260 mm 20 - 2000 U/min 1,5 kW M16x1 430 mm 715 mm 1800 mm 290 kg 115 mm 110 mm 230 - 850 mm 420 x 340 mm Drilling capacity / normal drilling Performance 23/25 (in E335/ST60) Main switch Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Lrsdpfey Hf Rusx Akujl OPTIONS (PRICES ON REQUEST): Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 7401.09 € 142.84 € 20 mm MK 3 260 mm 30 - 3000 U/min 1,5 kW M12 430 mm 715 mm Lrjdpfjy Hf N Dox Akusl 1800 mm 290 kg 115 mm 110 mm 230 - 850 mm 420 x 340 mm Drilling capacity / normal drilling Performance 20/23 (in E335/ST60) Main switch Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 3649.63 € 15 mm MK 2 220 mm 40 - 4000 U/min 0,75 kW M12 400 mm 520 mm 850 mm 65 kg 70 mm 85 - 370 mm 300 x 250 mm 70 mm Ljdpfx Aoy Hf Nwskuorl Drilling capacity / normal drilling Performance 15/18 (in E335/ST60) 17 Nm Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic Drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Drill package (vice & keyless chuck)

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 3164, TESA Scan 50 plus – Optical/Tactile Shaft Measuring Machine Year of manufacture: 2005 · Diameter range: 0.5 – 50 mm · Measuring length up to 500 mm · Resolution: 0.1 µm · Complete with Dell PC, monitor, keyboard, and mouse TECHNICAL DATA • Manufacturer: TESA (now part of Hexagon Metrology) • Model: Scan 50 plus • Year: 2005 • Measuring principle: Combined optical + tactile (contactless and tactile measurement) • Diameter measuring range: 0.5 – 50 mm • Length measuring range: 500 mm • Diameter resolution: 0.1 µm • Length resolution: 0.5 µm • Diameter error limit (20 °C ± 1 °C): 1 + D[mm] / 100 µm • Length error limit (20 °C ± 1 °C): 4 + L[mm] / 100 µm • Diameter repeatability: 0.5 µm Lrjdpfxoy Eqlxe Akusl • Length repeatability: 2 µm • Max. workpiece (D × L × m): 100 mm × 515 mm × 6 kg • Space requirement: approx. 1.3 × 0.8 × 1.2 m • Device weight: approx. 180 kg • Item no.: 3164 SOFTWARE • Pro-Measure (licensed) • Pro-Composer (licensed) SCOPE OF DELIVERY • TESA Scan 50 plus measuring device • Dell control PC • Monitor • Keyboard • Mouse CONDITION & HIGHLIGHTS Pre-owned device, fully functional • Precision measuring device from ongoing production • Software Pro-Measure / Pro-Composer included (licensed) • Ideal for turned parts, shafts, precision journals, and rotationally symmetric test parts • Supplied complete with Dell PC, monitor, and input devices – ready for immediate use MARKET COMPARISON Original purchase price approx. €40,000. ABOUT THE DEVICE The TESA Scan 50 plus is a high-precision optical-tactile shaft measuring machine for measuring rotationally symmetric workpieces such as shafts, turned parts, precision journals, pins, and similar test pieces. The device combines non-contact optical measurement with tactile probes, achieving a resolution of 0.1 µm for diameters and 0.5 µm for lengths. TESA (Switzerland) is now part of the Hexagon Metrology Group – a world-leading supplier of industrial metrology solutions. The Scan 50 plus is typically used in quality control labs, metrology departments in fine and small batch production, as well as in research and development. LOCATION & TRANSPORT Location: Central warehouse at Auktionshaus Köck, 6178 Unterperfuss, Austria. Self-collection or shipping by freight forwarder by arrangement. Transport costs on request. All information is provided without guarantee. Used device – sale is made to the exclusion of any warranty. Errors and misprints excepted.

Condition: good (used), Year of construction: 2020, functionality: fully functional, For sale: WMF 5000-S-Plus fully automatic coffee machine. The machine is sold with all accessories shown in the pictures. Viewing is possible at any time by prior appointment, even at short notice. Ljdsw S T Htspfx Akuorl VAT can be stated separately!

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 2,980 mm, travel distance Y-axis: 1,280 mm, travel distance Z-axis: 200 mm, number of axes: 3, total height: 2,680 mm, total width: 3,000 mm, overall weight: 3,295 kg, spindle motor power: 6,600 W, product length (max.): 6,970 mm, spindle speed (max.): 18,000 rpm, This 3-axis SCM TECH Z25 PLUS H-R4 was manufactured in 2005. It features a working area of 2500 x 1000 mm and a travel range of 2980 mm on the X-axis, 1280 mm on the Y-axis, and 200 mm on the Z-axis. The machine is equipped with 16 spindles operating at 4000 rpm and an electric spindle with a maximum speed of 18,000 rpm. If you are looking to get high-quality CNC processing capabilities, consider the SCM TECH Z25 PLUS H-R4 machine we have for sale. Contact us for further details. Lsdpfx Aksy Dgb Njujrl • Working area: 2500 x 1000 mm • Programmable speeds: X 25 m/min / Y 30 m/min / Z 22.5 m/min • Vector speed: 40 m/min • Drilling unit: 16 spindles, 4000 rpm, 2.2 kW (10 vertical + 6 horizontal) • Main spindle: HSK-63 • Tool magazine: Side magazine, 7 positions

Condition: new, Year of construction: 2026, The sandblasting cabin is a device used in industry, car workshops and renovation works. It is used to remove surface layers from various materials, such as metal, wood or glass. The cabin has side openings and telescopic cylinders, which allows the processing of long workpieces. The standard equipment includes a dust extraction system, a set of nozzles, a gun and protective stickers for the visor. Thanks to it, you can effectively and precisely remove surface layers from various materials. Product characteristics: The 350 liter top opening sandblaster for KDP350TOPPLUS profiles is a specialized, reliable and professional tool that will ensure precise and effective cleaning and treatment of metal surfaces. Its advanced solutions and high quality make it one of the best products on the market, which will surely satisfy demanding customers and ensure failure-free and safe operation. The sandblaster is a device that has been specially designed to remove surface layers from various materials. Thanks to the side openings, it allows the processing of long workpieces, which allows for even greater versatility and flexibility in use. Telescopic cylinders are installed in the cabin door, which makes it easier to open and close, and thus increases the comfort of use. As standard, the cabin is equipped with a dust extraction system that protects against inhalation of harmful dust during operation. Thanks to this tool, work is safer and more comfortable. KDP350TOP PLUS technical parameters: WORKING CAPACITY 330L (0.33m3) OPERATING PRESSURE 4 - 8 bar AIR CONSUMPTION 400 - 700 l/min AIR CONNECTION 1/4" (INCH) QUICK RELEASE VIEW AREA 580x270mm SIDE OPENING DIMENSIONS 200 x 180mm DRAIN CONNECTION fi 63mm and 90mm CAB INTERNAL DIMENSIONS (Width x Depth x Height lowest/highest point) 890 x 655 x 360/610 mm DIMENSIONS 960x720x1500mm WEIGHT 64 kg Standard equipment DC15 cyclone exhaust Foot pedal to control airflow Working field lighting - 12 V fluorescent lamp with 230 V power supply with switch 2 high-quality work gloves made of rubber, integrated with the device 2 suction (vent) connections with a diameter of 64 mm and 90 mm for connecting a suction device Sand blasting gun with eight replaceable ceramic nozzles 4 pieces of replaceable protective film for the window, viewfinder Lredpom Nccijfx Akuel front door with rubber perimeter seals for dust-free operation Manual in English We kindly inform you that the device requires self-assembly. We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 20 h, load capacity: 350 kg, lifting height: 13,800 mm, empty load weight: 3,660 kg, construction height: 2,600 mm, fuel type: electric, total length: 2,780 mm, drive type: Elektro, construction width: 1,410 mm, Scissor lift platform Technical condition: very good Front tyre type: solid rubber Front tyre size: 15x5 Lrodpjxrwr Eefx Akusl Front tyre condition: 80 - 100% Rear tyre type: solid rubber Rear tyre size: 15x5 Rear tyre condition: 80 - 100% Battery voltage: 12V Battery capacity: 140Ah Battery condition: new CE certificate, safety light,

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Fanuc G-Tech 16i, table length: 500 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 600 mm Travel Z-axis: 600 mm Table size: 500 mm x 500 mm MACHINE DETAILS Operating hours: approx. 73,000 h CNC control: Fanuc G-Tech 16i Lodpfx Ajy Atwuokusrl Tool magazine: 120 positions Internal cooling: 70 bar EQUIPMENT 6-position pallet changer 4th axis Knoll high-pressure system Note: The machine has already been dismantled.