Used Greda Processing Centre for sale (23,174)

Condition: excellent (used), Year of construction: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Kjdow A Nnpjpfx Aarelt

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke Kljdpfxoif Sg Ss Aarst - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: excellent (used), Year of construction: 2015, CNC glass milling and working centre NEPTUN QUICKMILL 160-30 NC Year of production: 2015 Milling, seaming of milled profiles and drilling (only with frontal head) Maximum working height: 1600 mm Maximum working length: 3000 mm Minimum glass size: 800 x 340 mm Kjdpferzazyox Aarelt Glass thickness: 5 - 12 mm NC controlled (with software) Excellent condition Good working order, still in production As is Available immediately

Condition: used, Year of construction: 2002, total height: 2,700 mm, total length: 3,000 mm, total width: 2,300 mm, overall weight: 6,000 kg, table load: 200 kg, Hermle C 600 V vertical CNC machining centre, manufactured in 2002, with a Heidenhain TNC 430 control system. The machine has travel ranges of approx. 600 x 450 x 450 mm and is equipped with an SK40 spindle and a tool changer. A chip conveyor and a complete coolant system are included, meaning the machine is ready for immediate use. The machine is in used but fully functional condition and can be demonstrated whilst powered up. Dimensions (LxWxH) approx.: 3000 x 2300 x 2700 mm Travel Y-axis: 450 - mm Weight approx.: 6,000 kg Travel Z-axis: 450 - mm Table diameter: 280 mm Travel X-axis: 600 - mm Table load max.: 200 kg Year of construction: 2,002 Condition: in working order Terms of payment: 100% prepayment before pick-up Kjdpfx Aajy S Nirsrolt Terms of delivery: From foundation under power: Yes

Condition: like new (used), Year of construction: 2019, operating hours: 1,000 h, functionality: fully functional, We offer as a set an almost new VEMAG Robot 500 meat processing machine, year of manufacture 2019, along with a Tippertie KDCMA 90 clipping machine, year of manufacture 2020. Kljdpfx Aoy Skw Doarjt Manufacturers: VEMAG and TIPPERTIE TECHNOPACK Models: Robot 500 and KDCMA 90 Total price: €45,000 + tax If you have any questions or need further information, please contact us by message or phone.

Condition: used, Year of construction: 1976, functionality: not functional, Widmann saw blade sharpener model HKS 700 Kljdpfx Asy Swlnsaret

Condition: ready for operation (used), Year of construction: 2012, Bizerba A550 Slicing machine Suitable for cooked meat, bacon, cheese Capable of stacking, shingling into groups Wire mesh conveyor belt Year 12-2016 Klodpjy Nduksfx Aarjt

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Kledpfx Aasyvqdforot Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Kledpfjv I T Ewex Aarst Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Ksdpfxoyaywhs Aarelt Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, Harrison V390 Gap Bed Centre Lathe (2011) Max’ Distance Between Centres 1250mm Max’ Swing Over Bed 390mm Max’ Swing In Gap 585mm Spindle Bore 54mm Klsdex D Uf Topfx Aarot Spindle Speeds 25-2500 rpm 415V, 3 Phase Electrics. Supplied with: Quick Change Tool Post 2 Axis DRO 3 Jaw Chuck 4 Jaw Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79023 Machine Serial Number: 7V0355P Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Karl Schnell FD3 Process Automat Cutter-Mixer-Emulsifier This machine combines in a unique way mixer, cutter and emulsifier in a closed system. The advantages are obvious: – Space-saving by compact design, – Complete evacuation of the product in the pre-cutting bowl under vacuum with simultaneous mixing and premincing, Kodpfxsxnkcie Aarelt – Stable end product with reproducible quality by fully automatic process control, – The possibility for direct and indirect heating and cooling, – The possibility to produce fine emulsion and paste-like masses as well as products with fine- up to coarse grained small pieces. In short: Time and cost saving with improved product quality. Manufacturer: Karl Schnell Model: FD 3 Hole Plate: 175 mm Batch Capacity: 310 liter Drive Emulsifier: 18/37 kW Pre-mincing motor: 15/30 kW Agitator motor: 0,7 kW Revolution agitator: 13,3 min-1 Drive infeed screw: 1,5 kW Machine Dimensions LxWxH: 2.250x1.800x2.100 mm Machine Weight: 3.000 kg.

Condition: good (used), Year of construction: 1988, turning diameter over cross slide: 900 mm, spindle bore: 105 mm, turning diameter: 1,200 mm, turning length: 5,000 mm, total length: 8,000 mm, total width: 1,800 mm, total height: 1,550 mm, bed width: 650 mm, workpiece weight (max.): 10,500 kg, Motorized tailstock CE-Chuck cover protection Telescopic guide cover over guideways Klodpfx Ajwrxpbsarst Steady rest  4 chuck 1000 mm diameter 3 chuck 500   mm diameter   2 Axis digital read out system DBC Turning Length: 5000mm Swing over bed Ø: 1150mm Swing over cross slide Ø:850mm Spindle bore: 105mm Bed width: 650mm Tailstock spindle Ø: 140Ø Stroke pinole: 300mm Spindle taper: 6Mk Speeds / ranges: 4,5 - 900Rpm Workpiece load: 8000 Length: 8000mm Width: 1800mm Height: 1550mm Weight: 13800kg

Condition: good (used), Year of construction: 1976, Centre lathe ZERBST - DPS 1800 MACH-ID 581 Klodpowvir Iefx Aarot Make: ZERBST Type: DPS 1800 Year: 1976 Swing over bed Ø 1600 mm Swing over cross slide Ø 1250 mm Swing in the gap Ø 2100 mm Bed width 1400 mm Power 35 kW Speeds / ranges 180 Rpm

Condition: good (used), turning diameter over bed slide: 1,400 mm, turning length: 5,000 mm, Centre lathe ZERBST - DPS 1400 MACH-ID 582 Make: ZERBST Klsdpfjwvirhjx Aarot Type: DPS 1400 Year: 1976 DBC Turning Length: 5000mm Swing over bed Ø: 1400mm Swing over cross slide Ø:1250mm Spindle bore: 100mm

Condition: good (used), turning diameter over bed slide: 1,250 mm, turning length: 8,000 mm, workpiece weight (max.): 12,500 kg, DBC Turning Length: 8000mm Swing over bed Ø: 1280mm Swing over cross slide Ø:1000mm Length: 12500mm Width: 2100mm Kledpfx Aewwtcmearot Height: 1800mm Weight: 35000kg

Condition: excellent (used), Year of construction: 2008, spindle bore: 52 mm, turning diameter over bed slide: 400 mm, turning length: 1,000 mm, total length: 2,200 mm, total width: 1,209 mm, total height: 1,800 mm, overall weight: 2,100 kg, Centre lathe Mexpol - TUB40 MACH-ID 9477 Make: Mexpol Type: TUB40 Year: 2008 DBC Turning Length: 1000mm Swing over bed Ø: 400mm Swing over cross slide Ø:250mm Spindle bore: 52mm Spindle power: 5.5kW Bed width: 300mm Tailstock spindle Ø: 60Ø Stroke pinole: 130mm Spindle taper: 4Mk Power: 5.5kW Speeds / ranges: 2135Rpm Feed rate X-Axis: 2000mm/min. Feed rate Z-Axis: 1000mm/min. Length: 2200mm Width: 1209mm Height: 1800mm Weight: 2100kg Kledpfx Ajyyxm Aoarot Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2018, functionality: fully functional, Slaughter unit: stunning tongs with electrical transformer and recording function, Hubert Haas, used, fully functional, with wall mount. Data per nameplate. Suitable for pig, sheep, and poultry slaughter. Price plus 19% VAT. VAT can be shown separately. No guarantee or warranty. Pallet shipping possible. Kedpfsy Sv Arex Aarolt

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NM - SPM, total length: 13,500 mm, total width: 2,000 mm, total height: 1,800 mm, Can packaging conveyor with scales and 20 workstations Equipment description: workstations we can make how much you need. Each workstation has a KERN EMB 2000-2 scale Workplace size no larger than 10000mm Equipment width with workstations no larger than 2000mm Equipment height no larger than 1800mm • Equipment frames made of stainless steel AISI 304 • Belt-chain type and butterfly type • Conveyor for full boxes • Conveyor for empty cans • Two full can conveyors • Empty can feed conveyor • Adjustable speeds • Option to record the work results of each person and a total can counter at the end • At the workplace – Scales - Kerne • Custom-made table production at the line • Control box on one side • Line max. power consumption 3.5Kw • Control box to be agreed with the customer. KERN EMB 2000-2 (2000g, d=0.01g) precision scales. Weighing surface 150mm. Simple and convenient 2-button operation Tare function facilitates formulation work Extremely flat design Klsdpfsw Afyhox Aarst Ready to use: batteries included 2. Empty cans (aluminum and metal) (99mm) feed conveyor at 2.5m height Equipment description: Equipment frame made of stainless steel AISI 304 Belt type Single line (for one type of cans) Adjustable feed speeds Can lifting speed 65 cans / 1min ( if needed ) - Manufacturing time form first payment: 5 months - CE Certificate will be transferred with P/N act. - Warranty - 12 months from the moment of signing the P/N act Manufacturing time +- 4months

Condition: used, Year of construction: 2008, functionality: limited functionality, Full evisceration line from MEYN. Kedpfx Aajy Nndpjrolt Maestro with 28 units. All the rest 20 units. Can be sold with units revised with brand new parts as well as shaft.

Condition: used, working area 2.600 x 1.250 mm spindle drive 7,5 kW feed max. 38 m/min x-axis 2.700 mm y-axis 1.600 mm Kljdpfx Aajn A Dwgsrot z-axis 250 mm SCM Routech R 3000 CNC machining center for processing sheet material with automatic feeding (vacuum destacker) and discharge. Video: Upon request Special price for self-disassembly and self-collection.

Condition: used, Cam switch assembly with 6 switching tracks, tool monitoring, process monitoring Kedpfx Aaey Sbw Ujrjlt BALLUFF type BSW 493-6 K3 /06 Year of manufacture: 1988 Number of cam switches: 6 Switching voltage: 230 Volts Switching current: 6 A Drive shaft: Ø 20 mm with 6 mm key - 6 mechanical cam switches BALLUFF - Cam length adjustable - Adjustment tool missing Enclosure dimensions (L x W x H): 240 x 185 x 140 mm Weight: 6.3 kg Good condition

Condition: used, Year of construction: 2002, functionality: fully functional, grinding width: 1,100 mm, overall weight: 6,600 kg, type of input current: three-phase, The machine is in working condition. 2+2 level grinding is possible. Klsdpfx Aajyybgrerst

Condition: ready for operation (used), Year of construction: 2011, - USED - TWIN-SPINDLE HEAD 3-AXIS VERTICAL MACHINING CENTRE WITH ROTOPALLET X-AXIS TRAVEL: 520 mm Y-AXIS TRAVEL: 360 mm Z-AXIS TRAVEL: 360 mm DISTANCE SPINDLE NOSE-TABLE: 200-560 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 36 - 10500 rpm; 30 - 35 kW; HSK A63 Ksdpfxjx U E Sze Aarslt PALLET: N.2 MAX ADMITTED LOAD: 450 Kg TOOL MAGAZINE: 21X2 POS MAX TOOL DIAMETER: 88 (125) mm MAX TOOL LENGHT: 250 mm CONTROL UNIT: FANUC 31i A5 WEIGHT: 5300 Kg OVERALL DIMENSIONS: 3200 x 3250 x 3245 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; HIGH PRESSURE COOLANT PUMP ; TOOL SETTER NOTE: WITH No 1 4th AXIS TABLE

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes all stainless steel mobile adjustable speed belt width 900 mm Kedpfsy N Tx Ssx Aarelt with extra outfeed belt with air knives dimensions (l x w x h) : ± 3.200 x 1.800 x 2.200 mm 2,73 kW