Used Grunhain 0,63 Kw for sale (35,280)

Condition: ready for operation (used), SER C100 FA- 172 grinding spindle, 7000 rpm, 1.3 kW, used, normal signs of wear, 100% functional, delivery as shown in the photos. Djdpfex Eq Ipex Af Touu

Condition: ready for operation (used), AMK KW-PB1 module AE-PB1-1.01 SN 27866, used, in good condition, fully functional, delivery scope as per photos. Duodoy Srm Hopfx Af Tou

Condition: new, GMN HF-Spindle HSP150DH 381 12 kW 350Hz 7000rpm 400V - Mapal SN: 378200, unused in opened original packaging, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for charges for packaging and shipping! Dujdpfsy Np Uvjx Af Tsu

Condition: good (used), Year of construction: 2002, functionality: fully functional, overall weight: 700 kg, The 30 kW screw compressor has been disassembled and is ready for shipment. Djdszb Dq Iopfx Af Tjuu

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 08C35020538, power: 22 kW (29.91 HP), overall weight: 21 kg, total width: 540 mm, total length: 350 mm, total height: 590 mm, - Universally applicable - Easy to transport - For spot heating of workplaces or for quickly heating small to medium-sized rooms Further information can be found in the data sheet. Djdsulvnrepfx Af Teuu

Condition: used, mileage: 52,791 km, power: 184 kW (250.17 HP), first registration: 01/1964, fuel type: diesel, empty load weight: 23,470 kg, maximum load weight: 1,530 kg, overall weight: 25,000 kg, tire size: 11.00R20, axle configuration: 6x6, wheelbase: 3,775 mm, color: red, driver cabin: other, gearing type: mechanical, suspension: steel, total length: 2,500 mm, total width: 3,300 mm, Year of construction: 1964, Equipment: all wheel drive, cable winch, Vehicle location: Bovenden, double bench seat, rear window, 6-speed manual transmission, rotating beacon, winch. Wheelbase: 3,775 mm. Body: crane truck type F Uranus 7, crane capacity: 16,000 kg, 360° rotation. The Magirus-Deutz Uranus was a truck model manufactured by the German commercial vehicle producer Magirus-Deutz in Ulm. With 250 HP from an air-cooled V12 engine made by Klöckner-Humboldt-Deutz, the Uranus was the most powerful truck produced in Germany at the time. This heavy, three-axle vehicle was introduced in 1954 as the A12000 Uranus and served as a chassis for fire brigade and military crane trucks as well as heavy-duty tractors. Other versions included articulated tractors and dump trucks, mainly for export. Dsdpfsvhg R Hox Af Tjuu This particular vehicle is a beautifully preserved collector’s item with an interior that is in outstanding original condition, which can of course be attributed to its very low mileage. Included with the vehicle are the original spare parts list, original description, and operating manual. The vehicle underwent restoration at a cost of approximately €150,000! Purchase price before restoration: €80,000! Length: 8,200 mm, width: 2,500 mm, height: 3,300 mm. Complete documentation/history available. The vehicle comes from the Ulm Fire Department. Fitted with 10 new Michelin tires, DREAM CONDITION! ACCESSORY INFORMATION WITHOUT GUARANTEE. Specifications subject to change, prior sale and errors excepted.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: Djdpfjzbxyqjx Af Tjuu The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, For sale is a partially refurbished Presona baling press, with 50 t pressing force, 22 kW drive power, built in 2005 Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Dujdpfx Ajzbxxaef Tju Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, For sale is a complete Bollegraaf baling system consisting of conveyor technology, baling press and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Dodpfx Afszbxw Aj Touu Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, New three-phase electric motor 37 kW three-phase motor SIEMENS Heavy-duty motor, electric motor, squirrel cage, asynchronous motor Type 1LE16032AA534GB4 Design V1 Frame size 200L Motor speed 2955 rpm Current draw 65 amps Motor power 37 kW Mains connection 400 Volt, 50 Hz Shaft diameter Ø 55 mm Shaft projection length 110 mm Keyway width in shaft 16 mm Flange diameter 400 mm Centric diameter 300 mm Pitch circle diameter Ø 350 mm - Flange motor with 4 mounting holes Ø 19 mm Overall housing length without shaft 640 mm Overall housing length with shaft 740 mm Required installation space (L x W x H) 740 x 400 x 520 mm Net weight 250 kg Excellent condition – new, unused from stock clearance Dsdpfx Afsyhq Aws Tsuu

Condition: used, Year of construction: 2014, operating hours: 9,600 h,

Condition: used, Year of construction: 2016, operating hours: 11,200 h,

Year of construction: 2020, condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan -Manufacturer: Dunli, axial fan -Type: YMF.A4T-630S-7FIIIS01 Duedpoylhwgsfx Af Tju -Power: 1.4 kW at 1400 rpm -Voltage: 380 volts -Fan wheel: Ø 630 mm / see photos Quantity: 1 piece available -Dimensions: 805/805/H265 mm -Weight: 36 kg

Condition: good (used), electric motor, three-phase motor -Manufacturer: VEM, electric motor type KR 112, 1/4 -Power: 3 kW -Speed: 1430 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP 44 Dedpszbr R Aofx Af Tsuu -Dimensions: 360/248/H255 mm -Weight: 37 kg

Condition: good (used), Year of construction: 1982, Oven, heating oven, heating chamber, heating cabinet, hardening oven, annealing oven -Manufacturer:Artur Nolzen, Chamber dryer oven type KTS 53/30/70 -Temperature: max. 1100 °C -Chamber size: 710 x 535 x 300 mm -Heating output: 25 kW Duodpfx Ajzbrx Hof Tsu -Automatic temperature control -Individual components: see photos -Dimensions: 1630/1530/H1700 mm -Weight: 1698 kg

Condition: good (used), Year of construction: 1987, Drying oven, drying cabinet, chamber dryer oven, heating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet -Manufacturer: GFO, chamber dryer oven type KE-SO -Useful space: 1 m³ / 1000x1000x1000 mm -Heating power: 40 kW -max temperature 350°C -Working temperature: 100 to 300°C -Individual components: see photos -Setup dimensions: 2510/1600/H3760 mm -Transport dimensions: 2510/1600/H2380 mm -Weight: 1500kg Dujdpfxsryalbj Af Teu

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower, side channel compressor Djdpfxjyh Hiws Af Tjuu -Type: Elmo-G 2BH1 807-1AC17 -Drive: 5.50 kW -Speed: 2920 rpm -Dimensions: 680/500/H520 mm -Weight: 122 kg

Condition: good (used), Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Motovario worm gear type NMRV/030 -Speed: 17 rpm i 080.0 -Engine: Neri Motori type T5034 -Power: 0.06 kW -Hollow shaft: Ø 14 x 63 mm -Protection rating: IP55 -Dimensions: 235/100/H130 mm Djdpfezbqqnox Af Tjuu -Weight: 3.5 kg

Condition: used, Year of construction: 2011, operating hours: 752 h, * KAESER M 122 screw compressor. * Capacity: 11.4 m³/min * Operating pressure: 7 bar! Duodpfx Afjzbw Ndo Tju * Year of manufacture: 2011. * 4-cylinder DEUTZ engine, TCD 2012 L04 2V * Water-cooled, 83 kW, 4,033 cm³ * Operating hours: 752 We expressly reserve the right of prior sale, as we also offer this item on other platforms. Information on accessories is provided without guarantee. Subject to changes, prior sale, and errors. We strongly recommend and encourage a viewing and inspection so that the buyer does not develop any false impressions regarding the condition and suitability. Viewings and inspections are possible at any time by prior arrangement and are expressly desired.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, overall weight: 7,630 kg, input frequency: 50 Hz, nominal power (apparent): 5,760 kVA, output voltage: 630 V, Three-winding transformer Rated power: 5760 / 2880 - 2880 kVA Rated voltage OS: 21 / 20.5 / 20 / 19.5 / 19 kV Rated voltage US: 630 - 630 V Make: SGB Year of manufacture: 2021 Switchgear group: Dy11y11 Cooling technology: OFAF Dusdjrl Nqtspfx Af Teu The transformer is electrically tested, cleaned and sealed before delivery, sealed and, if necessary, the paint repaired or repainted. We offer a warranty of 6 months on the function when used properly. We exclude the warranty in the event of overloading or converter operation. The place of fulfillment is Cloppenburg.

Condition: new, Year of construction: 2026, Josan Power Generators – Proven, Durable Quality! We also offer leasing and financing. Don’t hesitate to ask! ‼️5-Year Warranty*‼️ Equipped with sockets and Siemens circuit breakers, ATS, and much more. Available for pickup in Heilbronn. We also offer affordable shipping – simply inquire! Models available up to 1000 kW. All units equipped with electric start diesel engines, e.g., 56 kW, 1500 rpm. Compare prices and check what type of engine you get for what price. Ask what is actually produced in Germany or Europe. We also offer Cummins engine options for an additional charge. Top quality at discount prices! We are here for you in Heilbronn. German company, German laws, German service! All-inclusive pricing. With our certified German electricians, we offer fast and direct support if you ever need assistance. We also rent generators for uninterrupted service. We call everyone back. Discounts available for orders of 10 units or more. Contact us – we call everyone back. Generator 320 kVA / 250 kW: ➡️ Proven engine ➡️ Proven 6-cylinder diesel engine ➡️ Very quiet, only approx. 65 dB ➡️ 3-phase, 380/400 V, 220/230 V, 50 Hz ➡️ AVR regulation ➡️ Dimensions approx. 3700mm x 1300 x 1910mm ▶️ Weight approx. 2,400 kg ➡️ Electric starter ➡️ 8 sockets 220V 16A ➡️ 1 socket 400V 16A ▶️ 1 socket 400V 32A ➡️ 1 socket 400V 63A ➡️ Optional: 1 socket 400V 125A ➡️ Surge protection ▶️ Socket distribution box IP44 ➡️ CE certificate ➡️ With battery charger ➡️ With ATS Net price: €22,900.00 Generator 150 kVA / 120 kW: ➡️ 380/400V, 220/230V, 50Hz ➡️ AVR regulation ➡️ Very quiet, only approx. 65 dB ➡️ Dimensions approx. 2800 x 1100 x 1500mm ▶️ Weight 1,390kg ➡️ Proven 6-cylinder diesel engine, 132 kW / 1500 rpm ➡️ Electric starter ➡️ 8 sockets 220V 16A ➡️ 1 socket 400V 16A ▶️ 1 socket 400V 32A ➡️ 1 socket 400V 63A ➡️ Optional: 1 socket 400V 125A ➡️ Surge protection ▶️ Socket distribution box IP44 ➡️ CE certificate ➡️ With ATS ➡️ With battery charger Net price: €10,900.00 Generator 63 kVA / 50 kW: ➡️ 380/400V, 220/230V, 50Hz ➡️ Very quiet, only approx. 65 dB ➡️ Proven 4-cylinder diesel engine, 56 kW, 1500 rpm ▶️ Weight approx. 860kg ➡️ Surge protection ▶️ Socket distribution box IP44 Duodep E Egaopfx Af Teu ➡️ Electric starter ➡️ CE certificate ➡️ 8 sockets 220V 16A ➡️ 1 socket 400V 16A ▶️ 1 socket 400V 32A ➡️ 1 socket 400V 63A ➡️ Fully EU-compliant (including 220V as in Germany) ➡️ With AVR regulation ➡️ With battery charger ➡️ With ATS Net price: €6,900.00 Generator 50 kVA / 40 kW: ➡️ Proven engine ➡️ Proven 4-cylinder diesel engine ➡️ Very quiet, only approx. 65 dB ➡️ 380/400V, 220/230V, 50Hz ➡️ Dimensions approx. 2250 x 960 x 1270 mm ▶️ Weight approx. 860kg ➡️ Surge protection ▶️ Socket distribution box IP44 ➡️ Electric starter ➡️ CE certificate ➡️ With ATS ➡️ AVR regulation ➡️ With battery charger Net price: €6,900.00 Generator 25 kVA / 20 kW: ➡️ 25 kVA / 20 kW ➡️ Proven engine ➡️ Very quiet, only approx. 65 dB ➡️ 3-phase, 380/400V, 220/230V, 50 Hz ➡️ Dimensions approx. 1800 x 900 x 1000 mm ▶️ Weight approx. 650kg ➡️ Electric starter ➡️ CE certificate ➡️ With ATS ➡️ AVR regulation Net price: €5,900.00 All prices are net plus 19% VAT. The images may show optional accessories at extra cost. Images may vary! Subject to error. * Please ask for our warranty conditions.

Condition: new, Year of construction: 2025, functionality: fully functional, Hydraulic log ladder, for log diameters from 7 cm to 66 cm. Dsdpfxjv N Eiqo Af Touu

Condition: good (used), Three-phase motor, electric motor -Mitsubishi: Super Line type SF-J -Power: 2.2 kW -Voltage: see nameplate -Speed: 1430/1720 rpm Dusdpfx Afod Tgape Tou -Shaft: Ø 28 x 55 mm -Design: B3 -Dimensions: 360/270/H205 mm -Weight: 30 kg

Condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: Mill is unused -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Rotor width: mm -Rotor diameter: mm -Number: 3 hammer mills available -Price: per piece -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg Dujdpfxozbk Tij Af Tju

Year of construction: 2020, condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology Dujdpjzbk Iysfx Af Tsu -Condition: The mill was a demonstration unit equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable -Inlet cross-section: mm -Rotor width: mm -Rotor diameter: mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg