Used Gsw Ahm 3000 for sale (5,281)

Condition: excellent (used), Year of construction: 1999, mileage: 123,456 km, total length: 5,900 mm, total width: 2,450 mm, total height: 2,160 mm, Water treatment system, 3000 liters Air conditioning system Auxiliary heater Deutz engine 20 kW diesel engine Generator 5.90 x 2.45 x 2.16 m Lrsdpfx Akozdryheyjn Only 100 operating hours Like new! = Further information = Year of manufacture: 1999 Model year: 1999 Technical condition: very good Optical condition: very good

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Lredpfx Asxnlavjkysn

Condition: excellent (used), Year of construction: 2019, drilling depth: 3,000 mm, total length: 11,500 mm, total width: 4,300 mm, total height: 2,350 mm, rotational speed (max.): 1,800 rpm, spindle motor power: 44,000 W, Deep hole drilling machine Tacchi - FT 350 x 3000 MACH-ID 9650 Make: Tacchi Type: FT 350 x 3000 Control: SIEMENS 840D Year: 2019 High precision accuarcy ( two step proces) 1e step  cutting using skiving knives 2 step cold-form rollers for highest surface toleraces For Superfinishing Hydraulic and Pneumatic Cylinders / Rods ECOROL Boring heads in diameter: 40/50/63/80/90/100 mm Maximum out side diameter 250 mm Swing over bed 700 Center height 350 mm Drilling carriage Rapid feed rate both directions 6000 mm/Min Max. Drilling thrust 35000 N Feeder carriage Rapid movement 5000 mm/Min Thrust against workpiece 35.000 N Hydraulic approach stroke 150 mm Max. drill Ø steel:200mm Spindle bore: 85mm Drilling depth: 3000mm Power on spindle: 44kW Speeds / ranges: 1800Rpm Length: 11500mm Width: 4300mm Lrodpfszdq Ecjx Akysn Height: 2350mm Weight: 14450kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: not inspected (used), Year of construction: 2020, functionality: unexamined, machine/vehicle number: 71193, ● Condition: Not tested ● Location: 47906 Kempen ● Availability: By arrangement ● Payment terms: Advance payment by bank transfer ● Internal no.: ZM3 Technical data: Lodpfey Sawtex Akyorn Measuring volume: 3000 mm Accuracy: 0.045 mm Scope of delivery: ● With laptop and software as shown in the pictures (completeness not guaranteed) ● With transport case Dimensions & weights: ● Setup dimensions (L x W x H approx.): 1000 x 500 x 1000 mm ● Weight approx.: 30 kg Additional information: ► Transport to the destination can be offered upon request ► The quoted price is net plus VAT ► The goods are sold under exclusion of any warranty ► Technical data without guarantee ► Subject to prior sale ❗The sale of the goods is strictly to commercial customers only❗

Condition: excellent (used), RMS Vibrations Vibration Testing System Here we offer you an RMS electrodynamic vibration testing system. RMS Vibrations Vibration Testing System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N Power amplifier TGA 3000-000.00 Condition: used Untested! Tests were not possible. Scope of delivery: (See image) Lodezdtc Depfx Akyorn (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Written orders can be placed by email or fax.

Condition: excellent (used), Here we offer you a conveyor spray processing machine from Mega Electronics. Mega Electronics conveyor spray processing machines Conveyor spray processing machine FAPC 3000 The new FAPC models were developed to work with the latest development, etching, and stripping chemistries for the production of printed circuit boards, metal signs, and chemically milled metal components. The FAPC 3000 can accommodate panels with a width of up to 300 mm. Process chamber 450 mm Water rinsing chamber 280 mm Spray bars – Top 4 process chamber, 1 rinsing chamber Spray bars – Bottom 4 process chamber, 1 rinsing chamber Nozzle type: Poly v-jet – removable with ¼ turn Nozzles per tube: 3 + 4 for process, 4 for rinsing Nozzles: Precisely mounted for perfect alignment. Adjustable, compact distribution systems. Flow control / pressure control: Adjustable over the entire range from top and bottom. Conveyor speed control: High torque. AC drive motor system, powered by a precision inverter with digital displays for precise operator reference. Speed range: 45 mm - 1.6 m / min Temperature range: Ambient temperature to 50°C ±1°C Temperature controller: Digital Liquid level sensors: For heating and pump Manual reset of the over-temperature protection Voltage: 220 / 240V 50Hz (13A plug) Dimensions: Height: 670 mm Depth: 670 mm Length: 1430 mm Including drip tray Lrjdpfxezdqbwo Akyon Type: FAPC 3000 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), Year of construction: 2010, A Mimaki UV printer including a Kühnast UV conveyor dryer is available. 1) Mimaki UJF-3042 UV LED flatbed printer, year of manufacture: 2010, print dimensions X/Y: 300mm/420mm, max. material height: 50mm, max. print resolution X/Y: 1440dpi/1200dpi, machine dimensions X/Y/Z: approx. 1200mm/1000mm/800mm, weight: approx. 120kg. 2) Kühnast 3000 UV conveyor dryer, year of manufacture: 1998. Both machines must be inspected. An on-site inspection is possible. Lrjdpezfp H Ujfx Akyen

Condition: excellent (used), ProJet 3000 HD 3D Printer Here we offer an untested ProJet 3D printer. The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, this office-friendly 3D printer accelerates and maximizes your return on investment (ROI). Printing Modes: Lodpfx Aszdnnuekyjrn HD – High Definition UHD – Ultra High Definition Net Build Volume (xyz) HD Mode: 298 x 185 x 203 mm UHD Mode: 127 x 178 x 152 mm XHD Mode: n/a Resolution: HD Mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD Mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD Mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimension Accuracy depends on build parameters, part geometry, part placement, and post-processor settings. Email Notification: No Build Materials: VisiJet® EX200 Build Material: Durable solid material with a long service life VisiJet® SR200 Build Material: Cost-effective multipurpose material. Available in natural, blue, or gray VisiJet® HR200 Build Material: Available in blue, specifically developed for investment casting applications Support Material: VisiJet® S100 Support Material: Non-toxic wax material for melting away the supports without manual intervention Power Supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (LxWxH): Printer without packaging 737 x 1215 x 1504 mm Weight: Printer without packaging 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and machining optimization tools Extensive part file editing tools Automatic support generation Job statistics Network Compatibility: 10/100 Ethernet interface Hardware Requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating System: Windows XP Professional, Windows Vista, Windows 7 Supported File Formats: STL and SLC Ambient Temperature: 18-28 °C Noise Level

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 2950 mm swing diameter 3200 mm turning height 3500 mm table load 20 t feed range 3000 mm/min main drive motor 70 kW milling drive 16,1 kW Additional information * CNC-control FAGOR 8070 * C-axis with 360,000 positions Lredpfx Akozdrc Asyen * Milling head Inspection under power in the factory possible. Machine location is Spain.

Condition: used, Year of construction: 2013, functionality: fully functional, cutting height (max.): 310 mm, cutting width (max.): 520 mm, Equipment: CE marking, documentation/manual, Behringer HBP 310-523 GA NA 300 PC, manufactured in 2013, with extensive equipment: PHOTOS will follow! - Powered infeed conveyor with cross transport Ljdozdq Hmopfx Akysrn - 3000 mm feed gripper with single-stroke, rotating movement - Double miter saw - Powered outfeed conveyor with hydraulically pivoting bridge - Pusher on fixed supports - General technical data in the appendix This CNC-controlled sawing system is ideally suited for steel trading, mechanical engineering, and metal construction. Lengths, miter cuts on both sides, and material removal – all automatic.

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 71257, ● Condition: Not tested ● Location: 47906 Kempen ● Availability: By arrangement ● Payment terms: Advance payment by bank transfer ● Internal no.: ZM2 Technical data: Measuring volume: 3000 mm Accuracy: 0.07 mm Scope of delivery: ● With laptop and software as shown in the pictures (completeness without guarantee) ● With transport case Dimensions & weights: ● Installation dimensions (L x W x H) approx.: 1000 x 500 x 1000 mm ● Weight approx.: 30 kg Ljdpfx Akjy Sav Nsysrn Additional notes: ►We can arrange transport to the destination upon request ►The quoted price is net plus VAT ►The goods are sold without any warranty ►Technical data subject to change and without guarantee ►Subject to prior sale ❗Sale is exclusively to business customers❗

Condition: excellent (used), Year of construction: 1985, guillotine shear with rear stop and stacker Lrjdjzdnx Hjpfx Akysn design: hydraulic cutting length: max. 3.000 mm cutting length (stackable): max. 1.000 mm cutting thickness: max. 6 mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, turning length: 111,111 mm, We offer you the following: Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Lrodoy Sfx Nepfx Akyen Control: DMG Mori Celos with Fanuc F31iB5 Technical specifications: Max. turning diameter: 670 mm Turning length: 1,519 mm Bar capacity: max. 102 mm Travels: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm x2-axis: 200 mm y2-axis: +/- 40 mm z2-axis: 1,542 mm Main spindle: Max. speed: 3,000 rpm Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Counter spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Milling spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool holder: Capto C6 Number of tool stations: 76 positions Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Number of tool holders: 12 positions Speed of driven tools: 12,000 rpm Tool holder: BMT40 Torque: 16.9 Nm Rapid traverse speeds: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min x2-axis: 25 m/min y2-axis: 18 m/min z2-axis: 40 m/min b-axis: 100 rpm Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Technical features & accessories: − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for counter spindle − Foot switch for chuck operation − Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle − Tailstock function for counter spindle − Magazine-side control panel for the tool magazine − Coolant: water-soluble coolant − Chip conveyor (right discharge) − Coolant temperature control/coolant chiller − Coolant spray gun − Float switch for coolant − Coolant shower at main and counter spindle chucks − Compressed air blow-off system for chuck (counter spindle) − Oil mist separator zeroGOF #2 − Oil separator − ICS 70 bar, TMF300 band filter system, 980 l tank − Manual tool presetting device for main and counter spindle − Direct measuring system in x1, x2, y, z1, z2 axes − Spindle sensor measuring system with wireless signal transmission, manuf. Renishaw RMP600 − Universal filter − 3D quickSET − Cycle Alternating Spindle Speed − Cycle "Tailstock Tip at Turret" − Cycle MPC – Machine Protection Control − Cycle MVC – Machine Vibration Control − Synchronous thread cutting without compensating chuck − Increased input resolution to 0.0001 mm − Cs control for tool spindle − Program restart Accessories, illustrated tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change, errors and prior sale excepted!

Condition: used, Parallel Lathe SCULFORT MAXICAP type 315-3000 R Between points: 3000 mm Maxi Ø on bench: Ø 635 mm Maxi Ø over saddle: Ø 470 mm Maxi diameter in brocken bed: Ø 1000 mm x Width 200 mm Spindle motor: 13 CV Spindle diameter: Ø 71 mm Lredpfxozd Siie Akyon Rotation: from 20 to 1300 RPM Square turret GOODSHAPE 3-jaws chuck Ø 380 mm Threadings: Metric + Whitworth Tailstock: CM5 Feeds: longitudinal + transversal auto advances Equipped with: 1 lubricant pump + 1 face plate Ø 1000 mm Equipped with: 2 fixed steadies: Ø 380 mm + Ø 1000 mm Voltage: 380 V Dimensions (L x W x H): 5200 x 1600 x 1700 mm Weight: approx 5 T

Condition: used, machine/vehicle number: 17068, Year of construction: 2022, operating hours: 2,069 h, load capacity: 3,000 kg, lifting height: 4,900 mm, free lift: 1,350 mm, load center: 600 mm, construction height: 2,250 mm, fork length: 1,150 mm, front tire size: 16x7x10,5, rear tire size: 22x10x16, overall weight: 8,610 kg, enginetype: Electric, manufacturer: Combilift Lredpfszfd A Dex Akysn

Condition: good (used), 75 linear meters of used Schäfer R3000 shelving system 📋 Consisting of: • 60 x pre-assembled frames / approx. 250cm high / 60cm deep / new • 236 x shelves / 122cm long (special size) / 60cm deep / 150 kg load capacity / used • 19 x cross braces • Color: galvanized, gray • Condition: very good, see photos 💰 Price: €4,980.00 net, excluding VAT • Quantity discount: available upon request • Shipping costs: available upon request, throughout Europe Lodpsccxuisfx Akyorn • Delivery time: immediately available • Inspection and pickup: possible at any time by appointment • Product number: P2664 Constantly over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excluding VAT, ex warehouse.)

Condition: good (used), 30 linear meters of used Schäfer R3000 shelving system 📋 consists of: • 31 x pre-assembled frames / approx. 230 cm high / 40 cm deep / new • 90 x shelves / 100 cm long / 40 cm deep / 200 kg load capacity / used • 10 x cross braces • Color: galvanized, gray • Condition: very good, see photos 💰 Price: €2,670.00 net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: available immediately • Inspection and collection: possible at any time by appointment • Product number: P1087 We constantly have over 5,000 linear meters of pallet racking systems from various manufacturers in stock. Ljdpfocfhx Tsx Akyjrn (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.)

Condition: good (used), total length: 40,000 mm, 40 linear meters of used Schäfer R3000 shelving system 📋 Consists of: • 31 x pre-assembled frames / approx. 250cm high / 60cm deep / new • 150 x shelves / 128cm long / 60cm deep / 100 kg load capacity / used • 10 x cross braces • Color: galvanized, grey • Condition: very good, see photos 💰 Price: €3,890.00 net, excluding VAT Lrodpfx Akjq Dklljyen • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P10050 We constantly have over 5,000 linear meters of pallet racking systems from various manufacturers in stock. (Changes and errors in technical data, information and prices, as well as prior sale, are subject to change! See our terms and conditions, all prices excluding VAT, ex warehouse.)

Condition: good (used), total length: 60,000 mm, total height: 2,500 mm, 60 linear meters of SSI Schäfer R3000 shelving system, including insert grates 📋 Consisting of: • 47 x pre-assembled frames / approx. 250 cm high / 80 cm deep / new • 184 x grating shelves / 128 cm long / 80 cm deep / 200 kg load capacity / used • 16 x cross braces • Color: galvanized, gray • Condition: very good, see photos Lrsdpfx Aory Ucvjkyen 💰 Price: €7,290 net, excluding VAT • Quantity discount: available upon request • Shipping costs: available upon request, throughout Europe • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P10129 Constantly over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our general terms and conditions, all prices excluding VAT, ex warehouse.)

Condition: good (used), 100 linear meters of used Schäfer R3000 shelving system 📋 Consisting of: Ljdpfxstqnm Sj Akysrn • 79 x pre-assembled frames / approx. 300 cm high / 50 cm deep / used • 312 x shelves / 128 cm / 50 cm deep / 100 kg load capacity / used • 26 x cross bracing • Color: galvanized, gray • Condition: very good, see photos 💰 Price: €6,700.00 net, excluding VAT • Quantity discount: available upon request • Shipping costs: available upon request, throughout Europe • Delivery time: immediately available • Inspection and pickup: possible at any time by appointment • Product number: P10163 Constantly over 5,000 linear meters of pallet racking systems from various manufacturers in stock (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions; all prices excl. VAT, ex warehouse.)

Condition: good (used), total length: 13,000 mm, total height: 2,500 mm, 13 linear meters of SSI Schäfer R3000 shelving system, including shelf inserts 📋 Consisting of: • 11 x frames, pre-assembled / approx. 250cm high / 80cm deep / new • 40 x grating panels / 128cm long / 80cm deep / 200 kg load capacity / used • 3 x cross bracing Lredsry Uccepfx Akyjn • Color: galvanized, gray • Condition: very good, see photos 💰 Price: €1,690.00 net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P10128 We constantly have over 5,000 linear meters of pallet racking systems from various manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions; all prices exclude VAT, ex warehouse.)

Condition: good (used), total length: 300,000 mm, 300 linear meters of used Schäfer R3000 shelving system 📋 Consisting of: • 231 x pre-assembled frames / approx. 250 cm high / 60 cm deep / new • 1150 x shelves / 122 cm long (special size) / 60 cm deep / 150 kg load capacity / used • 80 x cross braces • Color: galvanized, gray • Condition: very good, see photos 💰 Price €20,800.00 net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by arrangement • Product number: P10052 We constantly have over 5000 linear meters of pallet racking systems from various manufacturers in stock. Lsdpfxoq Dkmbs Akysrn (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our terms and conditions, all prices excluding VAT, ex warehouse.)

Condition: used, 10 linear meters of used Schäfer R3000 shelving system 📋 Consisting of: • 9 x pre-assembled frames / approx. 250 cm high / 60 cm deep / new • 32 x shelves / 122 cm long (special size) / 60 cm deep / 150 kg load capacity / used • 3 x cross braces • Color: galvanized, gray • Condition: very good, see photos 💰 Price: €770,- net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P1115 Lrodpfx Ajq Abnvjkysn We constantly have over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excluding VAT, ex warehouse.)

Condition: good (used), 30 linear meters of used Schäfer R3000 shelving system 📋 Consisting of: • 24 x frames, pre-assembled / approx. 250 cm high / 80 cm deep / new • 92 x shelves / 128 cm long / 80 cm deep / 250 kg load capacity / used • 8 x cross braces • Color: galvanized, gray • Condition: very good, see photos 💰 Price: €4,320 net, excluding VAT • Quantity discount: available upon request • Shipping costs: available upon request, Europe-wide • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P2601 Ledpfx Ajd Nf Svjkyjrn We constantly have over 5,000 linear meters of pallet racking systems from various manufacturers in stock. (Changes and errors in technical data, specifications and prices, as well as prior sale, are subject to change! See our general terms and conditions, all prices excluding VAT, ex warehouse.)

Condition: good (used), total length: 120,000 mm, 120 linear meters of used Schäfer R3000 shelving system 📋 Consisting of: • 93 x pre-assembled frames / approx. 250 cm high / 60 cm deep / new • 460 x shelves / 128 cm long / 60 cm deep / 100 kg load capacity / used • 30 x cross bracing • Color: galvanized, gray Lrsdpfeq Dkl Eox Akysn • Condition: very good, see photos 💰 Price: €11,490 net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P10051 We constantly have over 5,000 linear meters of pallet racking systems from various manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions; all prices are excluding VAT, ex warehouse.)