Used Gustos D-5-D-2-2000 for sale (116,527)

Condition: excellent (used), Year of construction: 2007, ABB IRB 140 M2000+ ABB IRC5 Drive04 or M2000 cabinet DEVELOPMENT OF GSG ROBOTICS Knjdjz Tachepfx Ag Aoc GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a comprehensive service area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: used, mileage: 12,829 km, power: 375 kW (509.86 HP), first registration: 01/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,780 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes-Benz Arocs 2681 L 6x2 Wiedemann Super 2000 8.0/5.0/1.0, Water Recovery System Bodywork * Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 water recycling * 14,000-liter tank capacity * 1,000-liter fresh water compartment * 5,000-liter rinse water compartment * 8,000-liter sludge volume * Tank emptying by tilting at 45° Vacuum System * Wiedemann & Reichhardt KW 4000 Kjdpfjvh H I Eox Ag Asnc * 4,000 m³/h * approx. 25 m suction hose DN 125 High-Pressure System * Uraca P3-45 65 413 liters/min at 175 bar * approx. 180 m HP hose DN 32 * Hydraulic reel with approx. 80 m DN 13 Additional Fresh Water System * Speck NP 25/50-150 with 50 l/min at 150 bar * Spring-loaded reel with 15 m pressure hose DN 10 Special Features * Sludge tank made from material 1.4301 (stainless steel) * Suction and HP boom * 5-liter warm hand wash unit * Stainless steel toolbox * Control cabinet with display * Engine start controllable from the cabinet * NMV start controllable from the cabinet * Radio remote control with display * Equipment cabinet with two doors – on both sides * Hose storage tray * Noise insulation in pump compartment extended upwards * LED work lights * Central lubrication system Technical Data * Unladen weight: 19,170 kg * GVW (gross vehicle weight): 26,000 kg * Length: 9,970 mm * Height: 3,780 mm * Width: 2,550 mm Special Equipment: Axle load measuring system, front axle load 9.0 t, audio system: digital radio DAB/DAB+, right exterior mirror with maneuvering function, 220 Ah battery, interactive multimedia cockpit, electric pre-wiring in cab 24V/100A, driver assistance systems: high beam assistant and cornering light, traffic sign recognition, movable cab access, front suspension: 9.0 t, 4-leaf, remote online status check function, without trailer brake, without trailer coupling, speed limiter, 16-speed gearbox - type: G 280-16, independent gearbox lock, rear axle crown wheel 300, 3-piece mudguard with splash protection, 430 L aluminum fuel tank, right side, cooler/fridge, high-temperature cooling capacity, reinforced engine brake, steered liftable tag axle 9 t, navigation system, PTO - smooth flange, PTO independent and dependent on clutch MB 1,2, PTO MB 131-2c, programmable special module, rear frame overhang 1650 mm, rain sensor, acoustic reverse warning and exterior warning light, additional remote-control key (2), circuit breaker, seat covering: passenger and driver seat velour, seats: armrests for both passenger seats, comfort suspension seat for driver and passenger, exterior sun visor, additional 12V socket, 24V/25A socket in passenger footwell, additional 24V socket in passenger footwell, preparation for 4 surround cameras (display in dashboard monitor), preparation for additional headlights, twin-plate clutch, transmission oil cooler Further Features: Emission standard EURO 6, axle configuration: 6x2, heated front/entry mirror, 24V/15-pin trailer socket, Arocs 5, exhaust to right exterior, batteries mounted side-by-side, compressed air connection in cab, steel air tanks, air unit with condensate monitoring, medium air unit, automatic switch-on.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, ABB Robotics IRB6650 Foundry 200/2.75 S4C+ M2000 robot, Profibus Controller: S4C+ M2000 Number of axes: 6 Max. payload: 200 kg Max. working range: 2750 mm Year of manufacture: 2003 Scope of delivery: Robot, controller, cables, teach panel, wiring diagrams, floppy disk drive for data backup. Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Kodpfez Rk S Iex Ag Aonc Shipping costs to foreign countries upon request – please provide the country, city, and postal code. Freight costs upon request – please provide the delivery address.

Condition: used, Year of construction: 2020, operating hours: 2,563 h, power: 192 kW (261.05 HP), Equipment: air conditioning, all wheel drive, cabin, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to finalization, errors, typographical errors, and prior sale: Fendt Rogator 655D sprayer Registration date: May 20, 2021 Production unit: .563 Pump hours: 1,500, sprayer hours: 695 Transmission: 40 km/h 2 rotating beacons 8 headlights at the top front, 6 headlights at the bottom front Work lights at the top rear Full cab with air conditioning, Category 4 Joystick control 2 monitors / Varioterminal 10.4" 2 camera systems Air conditioning Radio, Bluetooth, USB port, hands-free phone system 2nd seat Refrigerator and warming cabinet 3" suction hose 3" high-performance pump system Stainless steel centrifugal pump 785 L/min 5-way valve, stainless steel, electric 1 Agromie basic package Contour Assist 2 water connections on the driver's side at the bottom for supply and drainage 2 partial widths 18 and 36 m / nozzle bar Dualtec 2+2 Rinsing gate Electric tank level sensor Spray nozzles 0.5 at the front + fertilizer nozzle behind it Nozzle XRC11003-VP set, 75 pcs Knsdpfxsz Edlve Ag Aoc 2 sensors on each side for slope compensation Large tank 6,000 L, rinsing tank 500 L Air compressor with pneumatic system Mechanical ground sensor Optisonic boom height control Variable Tecontrol Varioguide RKT Novatel Emergency steering Optisonic height control Central lubrication Hand wash tank and soap dispenser on the driver's side at the bottom Small storage compartment under the cab on the driver's side Retractable step with storage area Storage compartment on the passenger side at the bottom Both axles steerable Trailer coupling 2-wheel, 4-wheel Tires: Allianca Agriflex IF 480/80R50, front approx. 60%, rear approx. 80% 2 track widths, Optitrac hydraulic track adjustment Price: € 165,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of € 10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are subject to change.

Year of construction: 1996, condition: used, Rated current: 117A, connected load: 68kW, an on-site inspection is possible. Knsdpfx Agjz S Ivgo Ajc

Condition: used, Year of construction: 2013, operating hours: 6,842 h, Equipment: ABS, all wheel drive, Manufacturer HAKO Model Citymaster 2000 4x4 Year 2013 Condition Very good Serial Number WMU2X56B50WL00043 Ref. nr. 1067801 Reg. date: Engine: VW Diesel 4 Cylinder Hk: 102 Eurotype: 5 Rear view camera: ? Cabin heater: ? Ksdpfx Aowlydteg Ajnc Air conditioning: ? Radio: ? Tire Size: 215/70R15 Cover% left 40 - 40% Front suspension: Springs Suspension rear: Springs Hydraulic system: ? Total weight: 4900 kg. Manufacturer: HAKO Citymaster 2000 Hours: 6842

Condition: good (used), MBO T500-2/4 folding module + T-500-2-X cross-folding knife unit Kedpfxjz S Uptj Ag Aonc Machine in very good condition, ready for production. From the original owner. This is a secondary (cross-folding) module for an MBO folding machine, complete with an additional knife-folding unit. Includes 4 folding cassettes and one cross-folding knife. Equipped with sound-dampening cassettes. Can be connected to virtually any MBO machine model or used as an add-on unit for other machinery. Mounted on casters for easy mobility. Independent control system.

Condition: ready for operation (used), functionality: fully functional, power: 7.35 kW (9.99 HP), 2-speed (Vario) feed gearbox Kjdpfx Asyzc Efjg Asnc 4-spindle thickness table guide Electric thickness table adjustment

Condition: new, thread dia. M3 - M16 mm max. 187 U/min. working area 180 - 2000 mm engine output 0,7 kW Electric tapping machines for M3 - M16 thread, Angle adjustable. 9 pcs. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. optional: Knodpfofg U Sqex Ag Aoc Clamping table with T-slots: 990x700x800mm. Magnetic base. Also available: M14 to M24 and M27 to M33.

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 13,167 h, load capacity: 2,500 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,580 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: Normal Kedpfxj Aat Rde Ag Aonc Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 60 - 80% Side shifter, integrated 3rd valve

Condition: new, Load Weight Shelf 24000 kg Loading weight per level 2000 kg Number of load levels 2 x 6 Stk. Recommended material length 3000 mm Column width 1500 mm Knjdpfxofgyhgs Ag Asc Shelf height 2440 mm

Condition: new, Load Weight Shelf 28000 kg Loading weight per level 2000 kg Number of load levels 2 x 7 Stk. Recommended material length 3000 mm Knedpfx Agofgyhhe Aec Column width 1500 mm Shelf height 2440 mm

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight 84.0 kg range L-W-H 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for Knedpfx Agexabf Ej Aec cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 75 Plantisch mm Knodpfxsxaarqj Ag Aec Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 67.0 kg range L-W-H 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Manufacturer: Festo -Type: MFH-5/2-D-2-FR C -Magnetic valve -PN: 3-10 bar -Number: 1x valve available -Price: per piece Kedpfx Aoct H Tmjg Ajnc -Weight: 0.62 kg

Condition: new, thread dia. 12 mm 375 U/min. working area 180 - 2000 mm engine output 0,7 kW weight 28 kg Kjdpfxjd Iinne Ag Asnc

Condition: new, We would like to offer shafts dedicated for HAAS 2000XL, 1500, and TEREX TDS 820 machines, equipped with side combs and a breaking bar. -4-7-7 -4-9-9 PROTECHNIKA is a company with 21 years of history and from the very outset has specialized in the production of spare parts and complete recycling lines. In recent years, we have expanded our product portfolio to include the manufacturing of grinding shafts for slow-speed shredders. Through the implementation of automated welding processes and proprietary production technologies, we have significantly reduced lead times while maintaining consistently high quality. Grinding shafts are a series product, which, among other things, enables us to collaborate with machine manufacturers as an OEM supplier. What distinguishes PROTECHNIKA from the competition? It's simple! Knodpfx Agex Hhuie Aec - Certified 3.1 materials - TUV SUD Rheinland-certified quality - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 compliant - Welders certified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 - In-house design department capable of meeting any customer requirements - Our own RESEARCH AND DEVELOPMENT CENTER Customer relations are of paramount importance to us, as their satisfaction is our success!

Condition: used, Year of construction: 1974, Technical details: Kodpfx Aeu Ix Dceg Aenc turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine approx.LxWxH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Flansch Spitzen div. Zahnräder *

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h • Head: H = 182.19 m • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction Kodpsz Slnbefx Ag Aonc • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit.

Year of construction: 1955, condition: used, Union model L.2.A.S. 5" x 24" Lathe. Backgeared and Screwcutting lathe with a detachable gap bed. A practical and characterful old lathe that works well and has plenty of capacity in a compact size. From the family agricultural engineering workshop, which is now sold, hence the lathe is for sale. 3-phase 415v, so ideal for conversion to variable-speed drive from a 1-phase to 3-phase inverter (not included). 3-jaw chuck, faceplate and a collection of changewheels for screwcutting. It works. I can send a video of it running. Buyer to arrange and fund the shipment. Foklifting onto your van / truck may be possible with the agreement of the new property owner. Please contact me if you would like to arrange this. Location is near Kings Lynn, Norfolk, UK. If you have any questions or need more information, feel free to send us a message or give us a call. Kjdpfxsz Hifdo Ag Aonc

Condition: used, Precision lathe with cycle automation for chuck and shaft work, digital drive technology (Sinamics S120) and a Siemens Sinumerik 840D sl control running WEILER's operator-oriented SL2 software. Distance between centres 2000 mm, swing over bed 570 mm, spindle bore 83 mm, main drive 20/17 kW up to 2500 rpm. Year of manufacture 2022. Knjdjzl Ipnspfx Ag Ajc

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete Ksdpfx Ageydi A Is Ajnc -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve Knjdpfob A S Hpex Ag Aec -Magnetic valve -Series: W402 -Weight: 0.9 kg

Condition: new, Industrial belt sander Scantool 150 x 2000 with integrated double dust extraction system Sanding belt: 150 x 2000 mm Working width: 150 mm Motor: 4.8 hp Speed: 34 m/s Table height: 475 to 1240 mm Sanding belt dimensions: 150 x 2000 mm Platen size: 530 mm Weight: 115 kg The Scantool industrial belt sander models with double dust extraction system, 75 x 2000 and 150 x 2000, are powerful, high-quality machines built according to the strictest environmental and safety regulations. The belt sanders are standardly equipped with a motor brake, adjustable working height, eye protection, angle stop, and motor protection switch with zero-voltage release. This low-noise machine with CE marking is ideally suited for sanding all metals. Motor protection switch with zero-voltage release Separate emergency stop Knsdeflt Alepfx Ag Aec Motor brake Adjustable angle stop Eye protection The infinitely adjustable working height enables an ergonomically correct working position. Perfect design for fast, effective, and safe sanding. Self-adjusting belt tension. Danish top quality.

Condition: new, Industrial belt sander Scantool 75 x 2000 with integrated dual dust extraction system Sanding belt 75 x 2000 mm Working width: 75 mm Motor: 4.1 HP Speed: 34 m/s Table height: 475 to 1240 mm Knsdpfx Aeflt Amog Asc Sanding belt dimensions: 75 x 2000 mm Platen size: 530 mm Weight: 100 kg The Scantool industrial belt sander models with dual dust extraction system, 75 x 2000 and 150 x 2000, are powerful, high-quality machines built to the strictest environmental and safety standards. The belt sanders are equipped as standard with a motor brake, adjustable work height, eye protection, angle stop, and motor protection switch with zero-voltage release. This low-noise machine with CE marking is ideally suited for sanding all metals. Motor protection switch with zero-voltage release Separate emergency stop Motor brake Adjustable angle stop Eye protection The continuously adjustable work height enables an ergonomically correct working position. Perfect design for fast, efficient, and safe sanding. Self-adjusting belt tension. Danish top quality.