Used Höhe 2550 Mm Clamping Angle for sale (78,447)

Condition: good (used), Clamping angle for workpiece clamping -Dimensions: 196/80/H100 mm -Thickness: 12 mm Podpfx Aob E N Tujirsgt -T-slots: 8 mm -Surface: milled -Weight: 3 kg

Condition: good (used), Clamping angle for workpiece clamping, measuring device -Dimensions: 400/350/H230 mm Pgodpocvpubofx Airet -Thickness: 35 mm -Groove: 15 mm -Surface: milled -Weight: 48 kg

Condition: good (used), - Clamping angle for workpiece clamping -Dimensions: 275/150/H215 mm Pgedpeb E Aq Djfx Airst -Thickness: 24 mm -T-slots: 17 mm -milled surface -Weight: 14.5 kg

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. Pjdpfeh Ek Dajx Airsgt When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: excellent (used), BAT Magnesium Shaker Fixture Cube Manufacturer: BAT Machine type: Magnesium Shaker Fixture Cube / Clamping Cube Material: Magnesium Thread size: M8 For sale is a high-quality used magnesium clamping cube for vibration and shock testing systems. The fixture cube is used for the flexible mounting of test specimens, fixtures, and adapters on electrodynamic shakers. The numerous M8 threaded holes on several sides allow for a wide variety of test setups to be realized. The magnesium design ensures high rigidity while maintaining low weight and is ideal for applications in environmental, shock, and vibration testing. Technical data Dimensions: approx. 300 × 300 × 300 mm Pedpfxezkgqns Airsgt Material: Magnesium Thread size: M8 Threaded holes on several sides 2 lifting eyes for transport Internally weight-optimized design Application areas Electrodynamic vibration testing systems Shock testing systems Environmental testing technology Automotive Aerospace Electronics testing Quality assurance Research and development Testing laboratories Equipment Robust magnesium design Precision-machined clamping surfaces Thread pattern on several sides Lifting eyes Industrial design Transport data Dimensions: approx. 300 × 300 × 300 mm Weight: approx. 30–40 kg Condition Used From industrial use. Normal wear and tear consistent with age. Optical condition as shown in the pictures. Scope of supply BAT Magnesium Shaker Fixture Cube Scope of supply as shown in the pictures Shipping by freight forwarder or self-collection possible. Subject to changes, errors and prior sale.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Pjdomhh Dhjpfx Airsgt Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Psdpfxjmhhx Ie Airjgt The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Pgjdpfsmhh Anox Airjt - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Podsmhhyaspfx Airjgt - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg Pedpsmhh Dzsfx Airjgt - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg Pgedpfomhhf Ssx Airjt - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Pgsdsmhh Dtjpfx Airst - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Clamping angle for workpiece clamping Pgjdpeb Nblyefx Airst -Dimensions: 200/320/H220 mm -Thickness: 25 mm -Groove: 20 mm -Surface: milled -Weight: 22.7 kg

Condition: excellent (used), BAT Magnesium Shaker Fixture Cube Manufacturer: BAT Machine type: Shaker Fixture Cube / Mounting Cube Material: Magnesium For sale is a high-quality, used Shaker Fixture Cube made of magnesium, designed for vibration and shock testing systems. The mounting cube serves as a universal adapter and clamping device for securing test specimens, fixtures, and measurement setups on electrodynamic vibration testing systems (shakers). The precision-machined mounting surfaces with a threaded grid on all sides allow for the flexible implementation of various test setups. The magnesium design offers high rigidity with a low weight, making it particularly suitable for dynamic vibration and environmental testing. Technical data Manufacturer: BAT Type: Shaker Fixture Cube / Mounting Cube Material: Magnesium Dimensions: approx. 400 × 400 × 400 mm Thread size: M8 Threaded grid on all sides Precision-machined mounting surfaces Several large through-holes for mounting Features Robust, lightweight magnesium construction Precision-machined mounting surfaces Multi-sided threaded grid Large corner through-holes Industrial design Application areas Electrodynamic vibration testing systems Vibration testing Environmental testing technology Automotive testing technology Aerospace Electronics testing Testing and development laboratories Quality assurance Transport data Pgodpfx Aiozkhxtjrot Dimensions: approx. 400 × 400 × 400 mm Weight: approx. 35 kg Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear consistent with age. Scope of delivery Magnesium Shaker Fixture Cube Scope of delivery as shown in the pictures Shipping via freight forwarder or self-collection possible. Subject to changes, errors and prior sale.

Condition: excellent (used), BAT Magnesium Shaker Fixture Cube with Adapter Plate Manufacturer: BAT Machine Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Design: with lateral adapter plate For sale is a high-quality, used magnesium clamping cube for vibration and shock testing systems. The Fixture Cube serves as a universal clamping and adapter device for securing test specimens, fixtures, and assemblies on electrodynamic vibration testing systems (shakers). The precision-machined clamping surfaces with numerous threaded holes allow for the flexible configuration of various test setups. The laterally mounted adapter plate further expands the range of applications. Technical Data Manufacturer: BAT Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Dimensions: approx. 330 × 330 × 330 mm Precision-machined clamping surfaces Thread pattern on multiple sides Large through-holes at the corners Lateral adapter plate made of aluminum Features Magnesium lightweight construction Precision-machined clamping surfaces Multi-sided thread pattern Adapter plate made of aluminum Industrial design Application Areas Electrodynamic vibration testing systems Vibration testing Environmental simulation Automotive testing technology Aerospace Electronics testing Testing and development laboratories Quality assurance Shipping Data Dimensions: approx. 330 × 330 × 330 mm Weight: approx. 30–40 kg Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. Pedpfxjzkhv Ss Airogt Scope of Delivery Magnesium Shaker Fixture Cube Adapter plate Scope of delivery as shown in the pictures Shipping via freight forwarder or self-collection possible. Subject to change, errors and prior sale.

Condition: good (used), Year of construction: 2012, total height: 290 mm, total length: 5,000 mm, total width: 1,750 mm, plate height: 290 mm, Manufacturer: STOLLE Type: Cast Iron Specifications Metric US Standard Length 5000 mm Width 1750 mm Height 290 mm Number of T-slots 10 (7+3) Distance between T-slots / pitch 7x 250 - 3x 500 mm T-slot size 27 mm Podswp Azvepfx Airjgt Weight per plate approx. 8.2 tons Number of matching pieces 1 Dimensions (approximate) Length 5000 mm Width 1750 mm Height 290 mm Weight 8200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you check all important details. Share on

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: Pedpfomhhypex Airegt 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: excellent (used), round clamping plate clamping disc diameter 1380 mm Pgodpfjfggc Tjx Airet height 75 mm weight 900 kg

Condition: new, We offer you a new sales shelving unit for purchase. Technical data and further information: Overall height: approx. 1,587 mm Overall depth: approx. 855 mm Overall width: approx. 1,310 mm Special features: - Shelf height can be adjusted individually - Shelves can be installed at an angle (see images) - Castors for flexible storage - All castors are equipped with locking brakes, allowing storage on sloping surfaces - Base frame can be folded up, creating space for a Euro pallet - Material surface: high-quality chrome-plated - Suitable for various industries - Easy and straightforward assembly Included in the scope of delivery: Podshh Dgxopfx Airegt 01x Base frame, new Width: approx. 1,310 mm Depth: approx. 855 mm 01x Back panel, new incl. stabilization hooks 04x Locking castors, new incl. Allen key for assembly 02x Shelves, new Depth: approx. 375 mm 02x Shelves, new Depth: approx. 425 mm 01x Operating manual Please refer to the attached drawing for further details. Notes: The shelving unit will be delivered in disassembled condition and must be assembled on site. This is new merchandise; however, the packaging may have minor damage or dirt accumulation, etc.

Condition: good (used), Raised floor, slab supports, pedestal supports, hollow floor, cavity floor, system floor, cable floor -Raised floor: Hollow floor basic structure without floor panels -Metal support: 246 pieces, height 95 to 170 mm -Crossbars: 195 pieces, width 30 mm x height 32 mm -Crossbar length: 135 x 935 mm, 30 x 885/435 mm each Pgsdpfx Ajyuumaeiret -Price/Fee: complete -Transport dimensions: 1230/810/H700 mm -Weight: 685 kg

Condition: good (used), Year of construction: 2013, functionality: fully functional, conveyor belt length: 9,050 mm, conveyor belt width: 600 mm, conveyor belt speed: 170 mm/s, total length: 8,450 mm, total width: 1,000 mm, total height: 1,600 mm, discharge height: 1,700 mm, power: 0.37 kW (0.50 HP), TAF item number: 100000554 Manufacturer: FRASCH Year of manufacture: 2013 Overall dimensions (LxWxH) in mm: 8,450 x 1,000 x 1,600 Width incl. side panel in mm: 800 Width incl. drive in mm: 1,000 Side height in mm: 100 Conveyor length, total in mm: 9,050 Conveyor length, horizontal in mm: 6,950 Conveyor length, vertical in mm: 2,100 Conveyor width in mm: 600 Belt type: cleated belt Belt width in mm: 700 Cleats (cleat height/cleat spacing) in mm: 50 / 520 Substructure: fixed supports, height-adjustable Sliding surface: steel Inlet height in mm: max: - min: - Outlet height in mm: max: 1,700 min: 1,500 Drive: Head drive Psdexf Iukepfx Airsgt Motor type: Gear motor Motor data: SEW 0.37 kW Conveyor speed in m/s: 0.17 m/s Net weight in kg: Special features: Some cleats are bent or slightly damaged Condition: Used, fully functional Function test: OK

Condition: good (used), Cantilever racking, heavy-duty racking, single-sided cantilever racking, pallet racking -Cantilever rack: two-sided, height 4000 mm -Stands: 5x 340/150/H4000 mm / 350/300/3400 mm -Cantilever arms: 70 pieces 140/140/1500 mm -Cross braces: 124 pieces 60/40/1350 mm -Submission/Price: complete Pgedpfxjyu Um Ts Airot -Weight: 4100 kg

Condition: used, Krauss Maffei drop-out changer, height 410 mm- height 410 mm - removed from Krauss Maffei KM 200 - removed from running machine Podsrr Efnjpfx Airogt - fully functionalmanufacturer: Krauss Maffei Dition: gebraucht

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Pedpfx Aob A I Igoirjgt -Clamping angle for workpiece clamping -Dimensions: W380/H355/L360 mm -Surface: milled -Weight: 50 kg

Condition: used, Clamping plate, welding table, welding table, straightening plate, clamping cube, clamping tower, clamping box Podecm Tu Sepfx Airjgt -Width: 200mm -Length: 503mm -Height: 150mm -Plate thickness: mm -Hole diameter: 26mm -Dimensions: 503/200/H150 mm -Weight: 28kg