Used Hbm Bench Lathe for sale (7,735)

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm Dsdpfxezb Ipzo Akmowc 1750 mm between centres Coolant pump and tank

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Machine complete with: Sony LH70 2 axis Digital Readout Interlocking chuck guard Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Dwodpfx Akewf Sfvemoc Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 6,000 rpm, overall weight: 6,500 kg, Fanuc 18ITB parts diameter 130 mm, length 110 mm spindle speed 7500 rpm 12-station turret max tool speed 6000 rpm Djdjx Irzvspfx Akmswc power 24 kW, chip conveyor

Condition: good (used), Year of construction: 2012, 370mm max. machining diameter, 651mm swing over bed, 461mm swing over cross-slide, 712mm max turned length, Dwedpfx Akoz D Ayvsmsc 3500rpm spindle, 76mm bar capacity, 12 station turret, 15kW spindle motor, FANUC Oi control, 3 jaw chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor.

Condition: used, ZERBST DP/S3 cnc Heavy Duty Lathe Manufacturer: ZERBST (Germany) Year: 1991 Machine Type: Heavy Duty Facing & Centre Lathe simens control Maximum Turning Diameter: Ø1,600 mm Distance Between Centres: 4,700 mm Spindle Bore: 110 mm Main Motor Power: 55 kW Spindle Speed: 3.5 – 450 rpm Bed Design: Triple guideway cast iron bed Dwjdpjztff Nsfx Akmoc Control : Siemens Tailstock: Powered tailstock Thread Cutting: Yes Maximum Workpiece Weight: Up to 12,500 k

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 400 mm turning diameter over support: 220 mm turning length: 1100 mm centre height: 180 mm spindle passage: Ø 45 mm range of revolution per miute: 31,5 - 1.400 / 12 step U/min range of feed in x - axis: längs: 0,08 - 1,10 m/min range of feed in y - axis: quer: 0,028 - 0,40 m/min tailstock quill taper MT: MK4 tailstock quill adjustment: 200 mm total power requirement: 4,0 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,5 x 1,1 x 1,4 m Equipment: -Three-jaw chuck Ø 250mm manufacturer Forkardt with interchangeable jaws -Multifix steel holder -Cooling water device with pump Dwodpfxsu Ix E Hj Akmsc -chuck guard -chip collecting tray -chip guard Accessories: -chuck spanner -tool holder -2 pieces gears *

Condition: new, Year of construction: 2026, Nieuw in het programma van LTC, metaaldraaibank LTC DR 750 G. Geschikt voor werkplaats en hobby. Volledig tandwielgeschakelde aandrijving van hoofdas. Dit vergroot het over te brengen vermogen in de lage toeren t.o.v. variabel aangedreven hoofdas. Ook een voordeel is het wisselen van toerental. Dit gebeurt aan voorzijde schakelkast d.m.v. schakelhendels. Dus geen riem verleggen. Verder is de voedingskast compleet voorzien van tandwielen. Ook hiervoor geldt dat het wisselen van voedings snelheid of spoed schroefdraad gebeurt door schakelhendels aan voorzijde nortonkast. Dus geen gewissel met wisselwielen. Met inductiegehard en geslepen prismabed. CE uitgerust. Metaaldraaibank word standaard geleverd met: Drieklauw 160mm Vierklauw 160mm Spanenbak en achterscherm Onderstel Langsvoeding Dwarsvoeding 4-slag beitelhouder Vaste en meelopende bril Led verlichting Separate noodstop Toebehorenkist met wisselwielen, vaste centers, oliespuit etc. NIEUW: nu ook met koelinrichting Optioneel: Snelwisselbeitelhouder Digitale uitlezing Sino Draaibank is van prima kwaliteit. Machine is te bezichtigen op afspraak, met uitleg en demo. Met 1 jaar fabrieksgarantie. Verder verlenen wij prima service en zijn onderdelen van machine beschikbaar. Prijs is € 2550,00 ex btw Met Sino € 2850,00 ex btw Leverbaar in 230V en 400V. Motor 1,1kw Afstand tussen centers 750mm Opname losse kop MK3 Verplaatsing pinole 80mm Doorlaat hoofdas 38mm Spindelopname hoofdas MK5 Draadsnijden metrisch: 18 standen van 0,2 - 3,5mm/omw Draadsnijden inch: 39 standen van 4 1/2-48 1/n" Draadsnijden moduul: 18 standen van 0,2 - 1,5mm Dwjdpfx Ajigkv Eokmoc Draadsnijden pitch: 24 standen van 16 - 120 1/n" Draaidiameter over bed 320mm Draaidiameter support 195mm Dwarsverplaatsing support 200mm Toerental spindel 90-1800 omw/min Verplaatsing beitelsupport 120mm Voedingsbereik langs 0,05-0,35 mm/omw (12 traps) Netto gewicht 320 kg Voltage 230V en 400V Afmetingen (opgebouwd) LxBxH 1.46x0.75x1.28M (met Sino 1.52M hoog)

Condition: used, Year of construction: 1981, total length: 3,300 mm, total width: 1,100 mm, total height: 1,250 mm, Colour: Grey Empty weight: 2.500 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 14946 - Drive system: Conventional - Power [kW]: 7.5 - Centre height [mm]: 275 - Swing over bed [mm]: 550 Dedez Enywspfx Akmewc - Carriage turning diameter [mm]: 312 - Distance between centres [mm]: 1600 - Bed width [mm]: 385 - Spindle bore [mm]: 52 - Min. spindle speed [rpm]: 32 - Max. spindle speed [rpm]: 1600 - Transport dimensions: 3300mm x 1100mm x 1250mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 350100, spindle bore: 20 mm, turning diameter over bed slide: 200 mm, turning diameter over top slide: 120 mm, center height: 102 mm, feed length X-axis: 400 mm, quill travel distance: 90 mm, total length: 1,500 mm, total width: 510 mm, total height: 1,550 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 100 rpm, bed width: 130 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 100 rpm, type of input current: three-phase, overall weight: 660 kg, input voltage: 400 V, distance between centers: 450 mm, travel distance cross slide: 100 mm, Schaublin 102N-VM CF precision lathe in excellent condition, fully functional. The machine has undergone a geometric inspection (inspection report available). Dedpfez E Dymsx Akmewc Included equipment/accessories: - W20 collet set - 4-jaw chuck - Tripan tool turret with tool holder - 2 quick-change 6-jaw chucks - Drilling chuck - CCEA LED lamp - Gear set Machine available for viewing and testing at our premises in Switzerland. Price: CHF 29,900.– (excluding VAT) Loading and transport possible upon request.

Condition: good (used), functionality: fully functional, + Multifix "A" baseplate + Three-jaw chuck Dwodpfx Akoz Hatlomsc + Collets + Coolant pump Center height approx. 150mm Swinging diameter over support 160mm Swinging diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Speed range 30 - 3500 RPM Automatic longitudinal/cross feeds Tailstock MK3 Dimensions (LxWxH): 150 x 70 x 150cm Weight: 600Kg

Condition: used, Year of construction: 1973, turning diameter over bed 2997 mm turning diameter over slide rest 2235 mm turning length 12200 mm Control SIEMENS faceplate diameter 2000 mm required space ca. 7 x 22 m weight of the machine ca. 220 t HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation is included Technical Specifications Space requirement: 7 x 22 metres + control cabinet 4.7 x 0.5 x 2 metres Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. Dwjdot Ei Huspfx Akmjc Machine Data 1.1 Total Machine Max. Swing over bed slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm max. weight of workpiece 100,000 kp height measured from shop floor level up to machine axis 2,200 mm 1.2 Headstock Diameter of main spindle 670 mm Diameter of faceplate 2,000 mm Max. chucking diameter 1,600 mm Min. chucking diameter 455 mm Dead Center Angle 80 ° Faceplate Speed: Constant torque 1st range 0,5 – 2,6 2nd range 1,25 – 7,2 3rd range 3,1 - 18 4th range 7,8 - 45 Constant capacity 1st range 9,0 2nd range 22,6 3rd range 56 4th range 140 Capacity of Main Drive 220 HP Max. Torque faceplate 30,000 kpm Key Speed 5,7 rev/min 1.3 Saddle Max. admissible main cutting force 30,000 kp Feed Speed longitudinal 0,3 – 120 mm / min Feed Speed transverse 0,3 – 120 mm / min Rapid Traverse Speed longitudinal 2,000 mm/ min Rapid Traverse Speed transverse 1,000 mm/ min Max. copying depth 500 mm Max. length of tool carrier measured from front edge cross slide to front edge tool carrier 700mm Tool carrier – width 60mm 35 mm Cutting Edge height of tool units 60 mm Cutting edge height of shank-type tools beeing located on the clamping table 100 mm Travel of upper tool post 820 mm 1.4 Tailstock Tailstock barrel diameter 580 mm Adjustment of the barrel 150 mm Dead Center angle 80 ° Speed of rapid traverse 2,000 mm / min Positioning speed 500 mm / min 1.5 Steady Clamping range 350 – 900 mm ...

Condition: good (used), Lathe, COLCHESTER Mastiff 1400, center distance approx. 100 cm. Djdpez Icakjfx Akmswc

Condition: good (used), Center height: 102 mm Distance between centers: 300 mm Dedpfxoz Hwffs Akmjwc Maximum diameter above the carriage: 120 mm Maximum diameter above the bed: 200 mm Spindle bore: 20 mm Collet type: W20 Weight: approximately 450 kg Dimensions: L1200 x W600 x H1400 mm Base: cast iron Equipment: Tailstock, digital cross slide, Tripan turret, tool holder x 3, microscope, chuck, set of 2 drawers, set of collets.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, L&Z Lathe KMUTH BASIC Plus incl. 3-axis digital display - Year of manufacture 2011 - CE marking - Three-axis digital display - Center height 150mm - Max. turning diameter 300mm - Max. turning diameter over support 178mm - Max. turning diameter without bridge 430mm - Center distance 810mm - Spindle bore 38mm - Spindle speeds (geared) 60 - 1550 rpm (9 steps) - Automatic longitudinal / facing feeds Dwjdsz Hwx Ejpfx Akmjc - Spindle mount - Camlock D1 - 4" - Tailstock taper MK 3 - Quill travel 100mm - Bed width 180mm - Multifix base with insert - Electric chuck guard - Work light - Coaxial center - 3-jaw chuck - 2 x steady rests - Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 550 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2010, CNC lathe ECOCA MT-208MC 750 YEAR OF MANUFACTURE: 2010 CONTROL: Sinumerik 828D Technical data: Work area * Swing diameter over bed: 525 mm * Swing diameter over cross slide: 384 mm * Max. turning diameter: 250 mm * Max. machining length: 750 mm * X-axis travel: 175 mm * Z-axis travel: 537 / 787 mm Main spindle * Spindle speed: 750–4,800 rpm * Spindle bore: ASA A2-6 * Spindle bore: Ø 62 mm * Draw tube diameter: Ø 52 mm * Front spindle bearing: Ø 100 mm * Spindle taper: 1:20 * Chuck size: 8 inches * Spindle motor: 7.5 / 9 kW * Optional, according to manufacturer: 9 / 11 kW Axes * X-axis motor: 1.6 kW * Z-axis motor: 3.0 kW * Rapid traverse X-axis: 24 / 20 m/min * Rapid traverse Z-axis: 24 / 20 m/min * Guides: Linear / flat guides (depending on the model) Tool turret * Powered servo turret Baruffaldi Djdoz Hl Eajpfx Akmewc * Tool stations: 12 * Tool holder: VDI * Max. outer turning tool: 20 mm * Drilling bar diameter: Ø 40 mm Tailstock * Quill diameter: Ø 58 mm * Quill stroke: 88 mm * Tailstock travel: 415 / 665 mm * Quill holder: MK4

Condition: good (used), Year of construction: 1983, year of last overhaul: 2004, Turning center Dwsdpfez Hm Snsx Akmjc Manufacturer: TRAUB Type: TD36 Year of manufacture: 1983 Rebuilt: 2004 with: drilling tool holder, material feed system

Condition: good (used), Year of construction: 2002, Control system OSP U 100L, Swing over bed 530 mm, Swing over cross slide 420 mm Max. turning diameter 340 mm Turning length 1000 mm Travel X 260 mm Z 1020 mm C 0.001° Spindle speed (2 ranges) 38 – 3,800 rpm Spindle power 22/15 kW Dwjdpfx Aez Hwf Ejkmjc Spindle bore 80 mm Bar capacity 70 mm Number of tools in turret/driven 12/12, VDI 40 Driven tool speed 4,500 rpm, 5.5/3.3 kW, Chuck diameter 315 mm Machine dimensions 3310 x 1895 x 1925 mm, 6.000kg 3 pcs driven tool holders, 5 pcs fixed tool holders. Chip conveyor, Tailstock with hydraulic locking, Tool measuring equipment,

Condition: excellent (used), Year of construction: 2019, overall weight: 7,400 kg, Equipment: documentation/manual, Surface and contour measuring machine. Model: T8000 Wavemove ZKG. Used for measuring engine blocks. More information available via email. Dsdpfoz Hx Eyox Akmjwc

Condition: like new (used), Year of construction: 2022, MAZAK QUICK TURN 250MY SmoothG Max. turning diameter: 380 mm Max. turning length: 504 mm Max. milling speed: 5,000 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 80 mm The machine is equipped with: - CNC control: Mazatrol SmoothG - KITAGAWA 3-jaw chuck, BB-210, diameter 254 mm - Tool Eye - C-axis Dwedpfszk I Tqex Akmjc - Y-axis - Interface for bar feeder - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. powered tool holders The machine has only 900 hours of pure machining time!!!

Year of construction: 2011, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 330 mm MAX TURNING LENGTH: 350 mm MAX TURNING DIAMETER: 200 mm BAR CAPACITY: 51 mm SPINDLE: 5000 rpm; 11-16,5 kW; 210 mm X-AXIS TRAVEL: 150 mm Z-AXIS TRAVEL: 450 mm TURRET HEAD: 12 POS CONTROL UNIT: SIEMENS 810D WEIGHT: 3400 Kg OVERALL DIMENSIONS: 4325 x 2071 x 1742 mm ACCESSORIES: SWARF CONVEYOR Dwjdpfx Akszda Hwemec

Condition: good (used), Year of construction: 1954, Ref. -No.: 10576 Manufacturer: VDF WOHLENBERG Type: VDF Dsdpfxsxmd U As Akmswc Year of construction: 1954 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 27XXX Turning Length: 4000 mm Spindle Diameter: Ø 80 mm Faceplate Speeds I: 355 RPM Turning diameter over cross slide: Ø 1000 mm Max. Turning diameter: Ø 1250 mm

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Dwedpey Ed Ddjfx Akmec Country of origin: Germany Turning Diameter: 520 mm Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Further information: 2x revolver (12 places) Machine can be inspected under power by appointment.

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter Dwsdpfxjyw H Sze Akmsc - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: excellent (used), Year of construction: 2007, Mori Seiki NL2500Y/700 CNC lathe Year: 2007 Control: MORI MSX-850 III Main spindle: Spindle nose: A2-8 Main spindle drive power: 18.5 kW Max. main spindle speed: 4000 rpm Max. spindle bore: 80 mm Max. turning diameter: 366 mm C-axis 0.001 degree TURRET: Number of positions: 12 pcs. Number of driven tools positions: 12 pcs. Min. spindle indexing increment 0.001° Travel X/Z axis: 280 / 785 mm Travel Y axis: +/- 50 mm Max. speed driven tools: 6000 rpm Dwedpfxsyxppro Akmsc Power driven tools: 5.5 kW TAILSTOCK: Taper: MT5 Distance between centers: 705 mm ELECTRICAL SUPPLY: Total drive: 39 kVA WEIGHT AND DIMENSIONS: Space requirements: 3800 x 2143 mm Machine height: 2232 mm Machine weight: 6100 kg Accessories/options: - 2 cabinet accessories - 5 pieces driven tool holders, several static holders - collets, inserts, tools, sleeves, etc.... - high pressure paper band filter type, micro filtered, coolant tank - swarf conveyor - collet type chucks, different sizes - Kitagawa 3-jaw hydraulic chuck diameter 210 mm - Full set of documentations - Parts catcher Under power in our warehouse. Video available upon request!

Condition: good (used), Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 400 mm, turning length: 500 mm, turning diameter: 280 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 515 mm, Well-maintained SPINNER TC400 CNC lathe manufactured in 2012 and equipped with Siemens Sinumerik 840D ShopTurn control. The machine is in good technical condition, regularly serviced and ready for immediate operation. This machine is equipped with a tailstock and is ideal for the machining of shafts, flanges and precision turned components. Its rigid construction and reliable Siemens control system ensure excellent machining accuracy and productivity. Dwodpfszarxwsx Akmsc The machine can be inspected under power by prior arrangement.