Used Ibc Tilting Frame for sale (16,084)

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Pgsdpfx Ajvvkmbji Tju

Condition: used, Control: Siemens SIMATIC PANEL, connected load: 28kW, an on-site inspection is possible. Podpfxjzybv De Ai Tjgu

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 8,120 mm, total height: 2,300 mm, Vertical Hydraulic Press FAMAD HSKG 6m – Number of loading zones: 3 Podpfjyuylnjx Ai Tegu Dimensions of a single loading zone: – Loading height: 1140 mm – Length of battens in one zone: 1530 mm – Maximum batten width: 150 mm – Maximum length of glued elements: 3120 mm – Installed power: 3 kW – Number of cylinders per zone: - 3 pcs 50x100 mm - 3 pcs 80x100 mm – External dimensions (L x W x H): 8120x1000x2300 mm – Machine weight: 4800 kg

Condition: as good as new (ex-display), Year of construction: 2026, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L, built 2026 ----- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Psdjyyqnfepfx Ai Togu Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder ...

Condition: used, Year of construction: 1991, used frame press pneumatic working area 3000 x 2000 mm with center pressure bar absolute angular accuracy without correction comfortable working height due to adjustable press corners actuation of the working cylinders is done via 2 compressed air valves all pressure corners are adjustable Pgedpfow I Un Rsx Ai Teu the pressures can be set from 0-15 bar shipping dimensions: 320x100x270 cm availability: short-term location: Röllbach

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center Pjdpsxab Itofx Ai Tjgu - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: used, Universal swivel-tilt-rotary table DECKEL type FVW, suitable for FP 2 or FP 3 (Deckel no. 62473). Table size: 700 x 240 mm. Swivel range: +/- 30° in all directions. Weight: approx. 90 kg. Pjdpfxexcilrj Ai Togu

Condition: used, Roll Forming Line for Drywall and Zinc-Coated Door Frame Profiles General Description: Complete roll forming line designed for the production of zinc-coated steel profiles used in drywall structures and door frame systems. The machine processes galvanized steel strips with thicknesses typically ranging from 0.6 mm to 1.0 mm, featuring quick roller adjustment depending on the required profile type. Profiles Produced - Drywall Profiles: • Galvanized Tracks: width 57 mm and 77 mm, height 35 mm, sheet thickness 0.6 mm • Galvanized Studs: 39×55 mm and 39×75 mm, sheet thickness 0.6 mm • U-Shaped Profiles for False Ceilings: 27×60×27 mm, sheet thickness 0.6 mm • Offset Profiles for False Ceilings: 20×29×28 mm, sheet thickness 0.6 mm - Zinc-Coated Door Frame Profiles (10/10 mm): • Complete range from ART. 201 to ART. 217, including L, U, Z and special shapes • Variable dimensions: widths from 20 to 46 mm, heights from 15 to 31 mm, customizable configurations available Technical Features • Material thickness: 0.6 – 1.2 mm • Strip width: variable, depending on profile Pgsdpfsxnmyqox Ai Tsu • Number of forming stations: 19 • Rollers: hardened and ground steel rollers • Drive system: independent motorization for each roller group • Feeding speed: adjustable • Cutting unit: automatic flying shear or saw • Optional units: punching, slotting, or quick-change tooling systems

Condition: good (used), Year of construction: 1996, functionality: fully functional, For sale is a used SAMCO T 40 I table milling machine / swivel spindle milling machine, manufactured in 1996. This compact and robust milling machine features a spindle that can be swiveled up to 45°, multiple speed settings, and clockwise/counter-clockwise rotation. The spindle adjustment is conveniently done using the side handwheel. Technical specifications: Manufacturer: SAMCO / SCM Type: T 40 I Year of manufacture: 1996 Machine number: KK/032907 Voltage: 380 V / 50 Hz Motor power: 3 kW / 4 HP Speeds: 3,500 / 6,000 / 8,000 rpm Spindle length: approx. 125 mm Max. tool diameter: approx. 180 mm Swiveling milling spindle: up to 45° Clockwise/counter-clockwise rotation Motor brake Manual spindle height adjustment Milling fence with dust extraction option Weight: approx. 175 kg Used, well-maintained condition considering its age. The machine is compactly built and is well-suited for carpentry shops, joineries, and smaller woodworking businesses. Transportation is possible for an additional charge! Pgedpfx Aezxx Egoi Teu The machine is currently still at the customer's location but would be immediately available! The machine will be inspected before sale. In the case of a sale to commercial customers, the warranty will be excluded due to the year of manufacture. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: used, Second-hand machine Second-hand pneumatic frame press from Maweg MNo.: 7004124588 Pressing area: Length approx. 3500 mm / Height approx. 2450 mm 2 horizontal press cylinders Pgsdpfx Aiezk Nwkj Teu 3 vertical press cylinders Availability: by arrangement Location: Röllbach

Condition: new, Iveco 70C18, New, Euro 6, white color, wheelbase 3450, 2026 model, differential lock, manual transmission, air conditioning, reinforced leaf springs with auxiliary leaf springs, sprung driver's seat with armrest, navigation system, DAB radio, comfort package, electric windows and mirrors. Pjdpfx Aez Az Dzei Tegu

Condition: excellent (used), Year of construction: 2015, Holzkraft T 45 W classic Year of manufacture: 2015 Table saw with a robust steel-cast iron construction Tilts up to -45° Usable spindle length: 108 mm Max. tool diameter: 190 mm Table dimensions: 1000 x 435 mm Dimensions of aluminum sliding table: 1000 x 270 mm Motor: 4 kW, 400 V 3500/6000/8000/10000 rpm Pedpfx Aszzci Uoi Tsgu Equipped with a crosscut fence and sliding table Support arm on a swivel arm Aluminum telescope fence with folding stops and eccentric clamping device Otherwise, standard version Includes a 3-roller feed device

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Pgedod Swtaopfx Ai Teu Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: used, Year of construction: 1986, - 2 pneumatic cylinders along the length - 2 pneumatic cylinders along the width - 2 pneumatic workpiece clamping devices - Feed belt width: approx. 680 mm - Feed belt length: approx. 3,400 mm - Clamping area: 680 x 1,400 mm - Control panel Podpfxeiim Rno Ai Tjgu Machine dimensions: - Length: approx. 3,400 mm - Width: approx. 1,700 mm - Height: approx. 1,400 mm - Weight: approx. 800 kg

Condition: used, Year of construction: 1982, pressure 40 t distance between columns 695 bzw. 215 mm stroke 100 mm table surface area 650 x 440 mm ram surface 580 x 285 mm dayligth 400 mm total power requirement 15 kW dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m - with die cushion Pgodpfx Aiotqqq Ro Tsu - with light bareer make SICK

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Pedpfx Aepl D Hxsi Tegu Tyop GA 250

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 216 105, BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Psdjhqmghspfx Ai Tjgu Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

Condition: good (used), Code: 0040 Brand: BREVETTI MOTTA - ITALY Model: VELOX - CE Standard Pneumatic joining machine for wooden frames and Mdf , of furniture, doors, windows and various - CE Standard Technical data: Joining unit NR Workable rod dimensions: Max width mm 120 - Max height mm 70 - Min width mm 5 - Min height mm 5 Possible hourly production 150/200 finished frames Pgsdev Am Ibopfx Ai Tju Compressed air 6 bar Overall dimensions mm 500 x 680 x 1250 h Weight kg 75

Condition: good (used), For fully automatic assembly of frame components. Pgsdpsdhdg Isfx Ai Teu Frame outer dimensions: min. 120 x 120 mm max. 700 x 2,500 mm

Condition: used, functionality: fully functional, CNC ROTARY TABLE 2000 X 2500 MM Pedpfx Aiszzwkms Tjgu TABLE TRAVEL: 2500 MM LOAD CAPACITY: 20 TONS INDEXING: 360,000 POSITIONS

Condition: good (used), Code: 0488 Brand: GRIGGIO Model: T 45 T-PL - CE Standard Electronically programmed automatic tilting spindle moulder (+ 45° - 30°) with 3 contolled axis with tenoning carriage - CE Standard Technical data: Spindle tilting + 45° - 30° Shaft diameter mm 40 Motor power Hp 10 (Kw 7,5) Rotation speed 3000/4500/6000/8000/10000 rpm Shaft rotation reverser Electronic programmer SIEMENS controlling the sequential movement of the spindle Electronic programming: Spindle working height - Spindle tilting - Spindle moulder fence Electronic spindle moulder fence with spindle support to facilitate table exclusion Table with movable sector with manual adjustment in place of the rings on the table Height of work table mm 920 Extensible front support bar Work table dimensions mm 1800 x 730 Max tool size retractable under work table mm 320 x 140 Tenoning carriage for tenoning operations mm 900 x 330 - Stroke mm 1300 The work table can be fully tilted to + 60 - 60 degrees with the possibility of using the entire work table surface in any position - It can be aligned with the machine work surface Tenoning guard with suction hood Aluminium tables on the guideway N° 2 suction hoods diameter mm 120 Automatic feeder with 4 rollers with speed variator with motorised lift Overall dimensions of assembled machine mm 2800 x 1600 x 1800 h Overall dimensions for transport mm 2250 x 1600 x 1800 h Psdpfoz Hk T Aox Ai Togu Weight kg 1300

Condition: good (used), Euro pallet stacking frames, approximately 1,500 units in stock. Available for purchase in quantities of 100 or more / price per unit: €7.50 net. Pgjdpozlfcfsfx Ai Tou Available for purchase in quantities of 500 or more / price per unit: €6.50 net. Available for purchase in quantities of all 1,500 units / price per unit: €5.50 net. Free loading into truck, pickup from warehouse in Iserlohn.

Condition: excellent (used), functionality: fully functional, first registration: 11/2015, fuel type: diesel, empty load weight: 2,180 kg, maximum load weight: 1,320 kg, overall weight: 3,500 kg, axle configuration: 4x4, wheelbase: 2,500 mm, color: beige, driver cabin: day cab, gearing type: mechanical, emission class: euro5, loading space length: 2,550 mm, Year of construction: 2015, operating hours: 8,450 h, operation weight: 2,180 kg, Equipment: ABS, all wheel drive, fog lights, hydraulics, low noise, soot filter, traction control, trailer coupling, MGC.pl in Łaziska Górne offers for sale a 2015 Multicar 27B – a compact utility vehicle with all-wheel drive, available as a chassis for conversion. It is a practical base for municipal, industrial, and service applications. The vehicle was purchased from a company in the Czech Republic, where it was used to transport tools within a large factory. We acquired it without a body, in the configuration shown in the photos. It can serve as a base for a tipper or a winter road maintenance vehicle, equipped with a snowplow and a salt spreader. The Multicar has a Volkswagen 2.0 TDI engine with a displacement of 1968 cm³ and a power output of 102 hp, a five-speed manual transmission, 4x4 drive, and a rear axle lock. KEY INFORMATION Year of production: 2015 Mileage: 179,800 km Operating hours: 8450 engine hours Engine: 2.0 TDI, diesel, 102 hp Transmission: manual, 5-speed Drive: 4x4 Emission standard: Euro 5 Number of seats: 2 TECHNICAL CONDITION AND ORIGIN The vehicle arrived at our facility from the Czech Republic, having traveled without any issues. It is fully functional and has undergone a diagnostic inspection performed by our mechanics. The mileage is original and confirmed by the Czech authorities. The interior is in good condition, appropriate for the mileage and the utility nature of the vehicle. The Multicar is equipped with winter tires 225/75 R15C, with a tread depth estimated at approximately 70%. WEIGHTS AND TRANSPORT CAPABILITIES Permissible total weight: 3500 kg Curb weight: 2180 kg Payload before body installation: 1320 kg Permissible total weight of the vehicle and trailer: 7000 kg Maximum trailer weight with brakes: 3500 kg The weight of the installed body and equipment will reduce the available payload of the vehicle. DIMENSIONS Overall length: 445 cm Width: 162 cm Height: 220 cm Wheelbase: 250 cm Frame length from the cab: 255 cm Length from the radiator: 200 cm EQUIPMENT All-wheel drive Rear axle lock Additional side PTO connection ABS Power steering Wiring for a trailer hitch Electrically adjustable and heated mirrors On-board computer Cab heating Additional work lights Orange warning lights on the roof Non-factory radio Immobilizer BODY AND REGISTRATION We can arrange for the vehicle to be prepared for registration as a special-purpose vehicle, according to the planned body, intended use, and required formalities. Pedpfx Aiey N T Sfe Tjgu The stated price is net and applies to export and to businesses. A significant discount is possible for individual customers - Please contact us directly by phone to get your best price.

Condition: new, Year of construction: 2026, pressing force: 200 t, Sheet metal bending press – 200 T – Open width 1,600 mm For sale is a hydraulic sheet metal bending press from the manufacturer DURENDUS with a maximum pressing force of 200 T. The machine has an open width of 1,600 mm, a maximum installation height of 1,200 mm, and a stroke of 1,000 mm, making it suitable for bending, forming, and straightening operations in industrial applications. ##### Technical data + information: Sheet metal bending press – 200 T – Open width 1,600 mm ==== General information - Reference ID: ME-2026-A-180_DE-2026-ME-215-01 - Design: 2-column frame press - Manufacturer: DURENDUS - Pressing force: 200 T (adjustable) - Open width: 1,600 mm - Open height: 1,200 mm - Ram surface area: 1,500 mm - Table height from the floor: 850 mm - Overall dimensions (W × D × H): approx. 1,300 × 2,700 × 3,900 mm - Total weight: approx. 5,300 kg ==== Hydraulic cylinder - Stroke: 0–1,000 mm - Working pressure: 270 bar - Cylinder diameter: Ø 220 mm - Piston rod diameter: Ø 130 mm - Column guides: Ø 160 mm - Working speed: 3 mm/s - Approach speed: 9 mm/s - Retract speed: 20 mm/s ==== Hydraulics & Drive - Hydraulic pump: ASC - Flow rate: 40 l/min - Motor power: 7.5 kW - Pressure accuracy: ±5 bar - Tank volume: 160 l - Hydraulic oil: HLP46 (not included in the scope of delivery) ==== Control system - Operation: Foot pedal - Pressure adjustment: manually via rotary control - Stroke limitation: manually via sensors - Safety PLC - Control panel with warning and status indicators ==== Safety - Safety PLC - CE-compliant design - Safety monitoring of all processes Pjdpszg Nu Uefx Ai Tsgu ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 7.5 kW - Total connection power: approx. 11 kW - Protection class of the switch cabinet: IP54 ##### Application areas: Bending, forming, sheet metal processing, metalworking, steel construction, container construction, mechanical engineering, contract manufacturing, small series production (Sheet metal bending press, hydraulic sheet metal bending press, hydraulic press, 200 T press, 200-ton press, bending press, sheet metal bending machine, forming press, industrial press, coil bending press, battery coil press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all aspects of the national Brazilian safety standard NR 12, which is based on these. Our strength lies in the design and construction of special machines and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. The hydraulic systems of the presses primarily use components from leading European manufacturers.

Condition: new, This bucket is from stock Suitable with 4-4.5-5-6 tons mini excavators Edge Length: 120cm Capacity: 0.15m3 Pgsdpfx Aisvgm U Nj Tju Single Cylinder System