Used Inan 70/125 for sale (15,804)

Condition: new, power: 154 kW (209.38 HP), fuel type: diesel, gearing type: automatic, color: white, brakes: retarder, number of seats: 33, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, 2 x Iveco Daily new vehicles with COC, available immediately with GSR systems We are the official representative of Ferqui in Germany. Ferqui is renowned for its high-quality fiberglass bodywork. Since the late 1960s, Ferqui has been manufacturing with fiberglass, making it one of the pioneers in this sector. The vehicles have a permissible gross weight of 7,200 kg and therefore include Iveco warranty. Iveco C70 chassis with automatic transmission and 210 HP Air-suspended rear axle, Telma auxiliary brake, LED headlights, auxiliary heater, luxury driver's seat with seat heating - Iveco Daily - 1 x coach / 1 x school/intercity bus on Iveco C70 chassis - Air-suspended rear axle - Telma - Length: 8.59 meters, Width: 2.50 meters (school bus 2.40 meters), Height: 3.1 meters - Body made of fiberglass - Skeleton structure made from galvanized steel - Front air conditioning - Webasto passenger compartment A/C RT 190 = 19 kW (dual A/C system) - Double glazing for coach / single glazing for school bus - Panoramic windscreen - Front electric door with lowered entry - Front entry height, without kneeling, max 300 mm - Rear emergency door - Total capacity: 33 persons for coach, 29 (28+1+1) for school bus - USB sockets at every row for the coach - Overhead luggage racks left and right for the coach - Fresh air nozzles at every seat row - Convector heating - Iveco auxiliary water heater with timer Coach version: 4.2 m³ luggage compartment Ijdpfezmmhrjx Ahzjid - Rear luggage compartment - Spare wheel compartment cover - 2 side luggage compartments - Exterior color white Price: €159,990.00 for the school bus in the above configuration Coach: €169,990.00 Net export possible.

Condition: used, functionality: fully functional, Year of construction: 2013, fuel type: diesel, Still RX70-60 diesel forklift - Year of manufacture: 2013 Full cab Isdszmnyvspfx Ahzeid Pictures will follow!

Condition: used, functionality: fully functional, Year of construction: 2015, fuel type: gas, Forklift Still RX70 - 35 T Year of manufacture: 2015 Isdpfsy Itrvsx Ahzjid Lifting height: 3.50 m Full cabin with heating Radio Air conditioning 2 x free auxiliary hydraulics

Condition: new, Motor protection circuit breaker, series S2, 70-80A Iodpfxszlt U Ae Ahzeid 3RV2031-4RA10 SIEMENS

Condition: good (used), Storage location: 3129 Manufacturer: Pulsnitz Year of manufacture: 1979 Machine number: 1308 Type / Model: Sto 5 / 125-1 Capacity: 400 m³/h Maximum negative pressure: 1,250 Pa Density: 1.2 kg/m³ Maximum operating temperature: 50 °C Iijdpfozmaw Hex Ahzed Impeller diameter: 480 mm Suction port diameter: 380 mm Connection: 0.37 kW 220/380 V Condition: good Weight: 35 kg Dimensions: 480 x 600 x 1,100 mm

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 243708, screw diameter: 15 mm, total length: 2,500 mm, total width: 1,500 mm, total height: 2,500 mm, overall weight: 1,700 kg, power: 39 kW (53.03 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 64 A, controller manufacturer: SELOGICA, control voltage: 230 V, ARBURG ALLROUNDER 220 S 180-70 injection molding machine - Rated current for motor heater: 57 A - Includes core puller, manufacturer: MARCZINKOWSKI Please note: the item must be picked up on September 3, 2026, at a date to be confirmed. Iisdpfxezldp Re Ahzod FCA D-58507 Lüdenscheid - loaded onto a truck.

Condition: used, mileage: 50,543 km, power: 375 kW (509.86 HP), first registration: 05/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Standard warranty of 2 years up to a maximum of 100,000 km, drivetrain warranty of 4 years or 200,000 km. EBS, full braking assistant, EasyStart, LED lighting, 2 rotating beacons on cab roof, rear view camera pre-installation, ASR, emergency braking assistant, emergency braking assistant EBA, lane departure warning LDW, MAN Attention Guard, retarder, rotating beacons on cab roof, MAN Mediasystem Navigation Advanced 7'', navigation map Europe + Russia, Rio Box. Fifth wheel coupling height 40 mm, fifth wheel coupling JOST JSK 37 C 2'', 185 mm fifth wheel height, fifth wheel lead 1,075 mm. Hydraulic system for tipper semi-trailer 2-line system, Meiller, 275/150 bar, hydraulic coupling type G, 1 inch. Coupling height 1.30 m. Standard fifth wheel plate not suitable for heavy-duty operation!!!! Isdpevw H D Sofx Ahzjid

Condition: used, Year of construction: 2013, operating hours: 3,732 h, fuel type: diesel, gearing type: automatic, Equipment: cabin, head guard, * JCB 541-70 WasteMaster telescopic handler * Year of manufacture: 2013 * Operating hours: 3,720 h * Weight: 10,250 kg * 4x4x4 / All-wheel drive / All-wheel steering Iisdpfxezlndfj Ahzsd * Air conditioning * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: used, Year of construction: 2020, operating hours: 8,051 h, lifting height: 3,650 mm, fuel type: gas, mast type: duplex, fork length: 2,000 mm, fork width: 1,210 mm, total height: 2,700 mm, total length: 4,020 mm, total width: 1,380 mm, color: silver, Empty weight: 6.200 kg Lifting capacity: 4.000 kg - Year: 2020 - Documentation available: Yes Iodpfx Aozk Ia Rohzeid - CE marking present: Yes - CE certificate present: No - Serial number: 517335Y00005 - Operating hours: 8051 - Lifting capacity: 4000kg - Lifting height: 3645mm - Overhead clearance: 2700mm - Fork length: 2000mm - Maximum fork width: 1210mm - Minimum fork width: 260mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Full cabin, Work lights, Joystick - Mast: Duplex - Drive: LPG - Motor brand: Linde - Transport dimensions: 4027mm x 1380mm x 2700mm (l x w x h) - Transport weight [kg]: 6200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: excellent (used), functionality: fully functional, actuation type: electric, working width: 10,000 mm, bending angle (max.): 140 °, overall weight: 5,000 kg, total length: 11,000 mm, input voltage: 400 V, input current: 32 A, Equipment: emergency stop, foot remote control, FOR SALE: Jorns Norma Line 125 SM CNC 400-10 – Heavy-Duty 10-Meter Press Brake with Sheet Cutter Are you looking to upgrade your sheet metal workshop with serious capacity? Up for sale is a rare, high-capacity, Swiss-made Jorns Norma Line 125 SM CNC bending machine, boasting an impressive 10-meter bending length. In the sheet metal industry, Jorns is widely recognized as the gold standard for durability and precision. This unit was manufactured in 1989but has been operative for which is exceptionally low for a commercial machine of this caliber. It has primarily been used for light work with galvanized steel, meaning the mechanical components are in great condition. Additionally, the machine comes equipped with an integrated sheet cutting knife for quick, clean, and straight cuts directly on the machine. Key Highlights: Massive 10-Meter Bending Length – Allows you to bend long roof, ridge, and facade flashings in a single piece without joints. Exceptionally Low Hours – With only 6,000 operational hours, this machine has plenty of life left for decades to come. Premium Swiss Engineering –Extremely rigid and precise frame with a solid machine weight --- ### Technical Specifications: Brand: Jorns (Switzerland) Model:Norma Line 125 SM CNC 400-10 Year of Manufacture: 1989 Isdpfx Ajzlkq Ishzjid Max. Bending Angle: 140° Bending Length:10,020 mm Dimensions & Weight: Machine Depth:1,700 mm Machine Height:1,870 mm Machine Weight: Approx 6000 kg Additional Equipment: Programmable Jorns CNC 400 Control unit Integrated rotary knife for sheet metal cutting Foot pedal control

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Iiedpfx Ahjcnw U Djzed Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: as good as new (ex-display), Year of construction: 2024, Technical specifications: Laminated panel press from our showroom; Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Iijdpfx Aheb Eln Djzod Location: available from our warehouse in 54634 Bitburg.

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams Iodpjw Sgnkefx Ahzeid - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements Iiedpjy Egz Sofx Ahzjd - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) Iiedpfxoiidm Nj Ahzod - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Year of construction: 1996, condition: ready for operation (used), A Sandern vacuum calibration and cooling tank is offered. Max. pipe diameter: 125mm, tank length: 6000mm, number of chambers: 2. Dimensions X/Y/Z: 6500mm/1000mm/1500mm, weight: 1500kg. Inspection by appointment possible. Iisdpfezli U Sjx Ahzjd

Condition: new, Axesta Grossenbacher Axis Control IEEE 488 / 50 70 086, serial number: 9705180044, unused, 100% functional, scope of delivery as shown in the photos. Iijdpfx Asi D T A Ajhzjd

Condition: new, Axesta 50 70 086 Axis Control, Serial No.: 9705180034, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Iisdpfxsi D T Aqo Ahzed

Condition: new, Axesta Grossenbacher Input 40x24VDC / 50 70 360, Serial No.: 9807602063, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Isdpfxei D T A He Ahzsid

Condition: new, Fortuna FAVY 70 L 220.319 grinding spindle, serial number: 207060, unused, 100% functional, scope of delivery as shown in the photos. Iisdpfx Ahei D U Raozsd

Condition: new, Schunk SRH+40-WP /30061820 Pneumatic rotary indexing unit + 2 x part no. 125-1 / 30043071 Universal gripper, unused, 100% functional, scope of delivery as shown in the photos. Isdpfei Ec Ngjx Ahzoid

Condition: new, Fortuna FAVY 70 L, serial number 220.319, grinding spindle, SN: 207059, unused, 100% functional, scope of supply as shown in the photos. Iijdpfoi D U N Ssx Ahzed

Condition: new, GMN TSE 100cg-6000 / 125 high-speed spindle, serial number: R358399, unused, in open original packaging, 100% functional, scope of delivery as shown in the photos. Iedpfei Eaabox Ahzoid

Condition: used, Year of construction: 2017, load capacity: 8,000 kg, lifting height: 4,900 mm, total length: 5,250 mm, Electric forklift Still RX 70-80/900 Drive Electric Iodpfxozluv Ij Ahzjid Year built 2017 Lifting height (mm) 4,900 Lifting weight (kg) 8,000

Year of construction: 2014, operating hours: 3,000 h, condition: used, functionality: fully functional, The price is a package price for 9 high-pressure tensioners. 5 x Allmatic and 4 x Homge. Inspection is possible. Shipping is possible for an additional fee. Iedpfszlpghex Ahzeid