Used Indumasch Siegen Notching Machine for sale (65,129)

Condition: new, 3.0 mm ST 40 2.0 mm VA 90.0 Grad blade length 130 x 130 mm table: 640 x 460 mm work height max. 900 mm engine output pneumatisch weight 200 kg range L-W-H 600 x 670 x 1270 mm Properties: - Notching with burr-free cut, without deformation of the cutting edges - Machine body made of high-quality gray cast iron, base made of sheet steel - Cutting blades made of surface-hardened tool steel - Effortless work thanks to pneumatic drive - Operation using a foot pedal, so both hands are free for the workpiece - Large work table with integrated scales - T-slots for precise guidance of the pivoting stops - Protective cover in front of the cutting blade for high safety Lrsdpfx Asxcuxkskyek Scope of delivery - 1x set of cutting blades - 2x pivoting material stops - Plexiglas protective cover - Foot pedal - Base frame

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg range L-W-H 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel Ledpfx Akexabpdoyork * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 87.0 kg. The AL1-2E electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continue to work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2E pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). Do you often notch pipes? Then the electrically driven AL1-2E pipe notcher with Lodpfjxaardjx Akyork the 2.2 kW electric motor is just right for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electric motor pipe notching machine - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: good (used), Year of construction: 1998, punching force: 70 t, overall weight: 2,400 kg, total length: 2,100 mm, total width: 1,300 mm, total height: 1,900 mm, Profile shear with punching and notching station, shear capacity 70 tons = 450x15 mm, punching capacity 130 tons = Ø 28x20 mm, punching throat 500 mm, punching table 1150x530 mm with gauges, shear gauge with trigger pulse, 2 foot pedals, much tools; dimension 1300x2100x1800 mm, weight ca. 2400 kgs Lredpfxomig D Dj Akyek

Condition: good (used), functionality: fully functional, Year of construction: 1997, Used variable angle notcher by Euromac Type Multi 220 6 Lrjdpfox E U Awjx Akyok Capacity 220 x 220 x 6 mm Equipped with radius cutting punch at the rear side

Condition: good (used), Notching milling machine -automatic hydropneumatic milling feed Lrsdpfob A Hlajx Akyok -for milling cutters max.: Ø 250 mm

Condition: good (used), Notching milling machine Lrjdob A H Hfspfx Akyok -automatic hydropneumatic milling feed -Maximum cutter diameter: 250 mm

Condition: good (used), Notching machine, sheet metal notcher, notching shear, corner notching machine, corner shear, corner shear -Max. cutting capacity: approx. 2 mm -Blade length: 102 mm -Dimensions: 620/590/H1790 mm -Weight: 150 kg Lodpfx Akedf U S Ajyerk

Condition: good (used), Year of construction: 2006, machine/vehicle number: 80706, Offer 25496 Hydraulic Universal Two-Station Corner Notcher + Punching Machine Technical Data: Station 1: Notching Unit - Cutting length up to 220 mm - Cutting thickness – steel with 400 N/mm² tensile strength: 6 mm - Infinitely adjustable cutting angle by handwheel: 30° – 140° - Pneumatic clamping - Locking stops left & right Ledox I Nbgjpfx Akyork - Table surface: 1020 x 940 mm - With T-slots and depth stops - Table height approx. 920 mm Station 2: Edge Bending Unit or Punching Station - Max. pressing force: 200 kN - Working speed: 0 to 10 mm/sec - Edge bending up to 800 mm - Hole punching up to 50 in 3 mm - Depth stops - Drive: 400 V / 4 kW - Electric foot switch - Required space approx. W 1000 x H 1350 x D 1110 mm - Weight approx. 1100 kg

Condition: used, Notching Machine COMACA type N/EPAS Maxi Sheet thickness: 3 mm Table size: Length 1050 mm x Depth 700 mm Ends tables dimensions: 900 x 470 mm Throat depth: 110 mm Orientable stop Blade length: 225 x 225 mm Voltage: 380 V Total length with ends tables: 2900 mm Length: 1200 mm (with retreated ends tables) Lrsdpfox Elf Nex Akyok Depth: 800 mm Total height: 1100 mm Weight: approx 1 T

Condition: used, Year of construction: 2000, plate thickness 3 mm blade length 225 x 225 mm cutting angle 90 ° throat 110 mm strokes per minute 45 Lrodpfoxyacpox Akyjk total power requirement 2,5 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1 x 1 x 1,2 m

Condition: new, plate thickness 1,6 mm 4 t blade length 156 mm angle adjustable from - to fest Grad table surface area 450m x 305 mm total power requirement Handbetrieb kW weight of the machine ca. 95 Kg Lredpfx Aoftd Uajkyjk Dimensions (LxWxH) 530 x 380 x 480 mm

Condition: new, - Capacity 250 x 8 mm - Hydraulic - Foot control Lredonwlptepfx Akyek - Central lubrication system - Emergency stop - Documentation - 400V

Year of construction: 1981, condition: used, plate thickness 4 mm blade length 250 mm angle adjustable from - to fest 90 Grad table surface area 900 x 800 mm Lrjdpjp U Utfjfx Akysk total power requirement kW weight of the machine ca. 0,65 t dimensions 1,2 x 0,9 x 1,1 m Hydraulic notching machine - Footswitch - 2 pcs. sheet metal stop

Condition: used, Year of construction: 1982, plate thickness 8 mm blade length 250 mm angle adjustable from - to fest table surface area 840 x 750 mm total power requirement 3,0 kW weight of the machine ca. 1,3 t Lrodpfx Akovki Hijyek dimensions 1,4 x 1,1 x 1,5 m Hydraulic notching machine - Footswitch - 2 pcs. sheet metal stop

Condition: used, plate thickness 3 mm blade length 250 mm angle adjustable from - to fest 90 Grad table surface area 900 x 790 mm total power requirement kW Lredpovki D Usfx Akyok weight of the machine ca. 0,65 t dimensions 1,2 x 0,9 x 1,1 m Hydraulic notching machine - Footswitch - 2 pcs. sheet metal stop

Condition: new, Year of construction: 2013, plate thickness 1,6 mm pressure 450 MPa 150 x 150 x 90° table surface area 650 x 500 mm 875 mm cutting angle - upper blade 4 ° weight of the machine ca. 0,075 t • manual notching machine with lower frame • sheet thickness: Lrjdpot Smgxjfx Akysk - steel 450MPa to 1.6 mm, - aluminium to 2.25 mm, - plastic to 3.0 mm, • machine for demonstration

Year of construction: 1996, condition: used, Notch width: max. 200 mm Notch depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by operating the foot switch Profile clamping using a continuously pivoting vice. Lrsdpfx Asq Awg Ejkysk

Year of construction: 1993, condition: used, Cutter diameter: 300 mm Max. release width: 350 mm Max. release depth: 110 mm Lrodpjrv A Hmjfx Akyek Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spray device Manual feed Weight: approx. 280 kg

Condition: new, Year of construction: 2025, Suitable for Outer pipe diameter Ø 26.9(3/4″) Ø 33.7(1″) Ø 42.4(1_¼") Ø 48.3(1_1/2″) Ø 60.3(2″) Outer pipe diameter for zinc spout Ø 22 - Ø 76 Advantage: Quick and easy notching Wall thickness (steel): 5 mm Wall thickness (stainless steel): 3 mm Weight: 93 kg Operation: Electric (2.2 kW) Application: Round, square and rectangular tube Ledexyy A Ajpfx Akyjrk Easy to operate With the motorized pipe notcher AL1-2U you can notch pipe outside diameters of Ø26.9 (3/4″), Ø337 (1″), Ø42.4 (1 ¼"), Ø48.3 (1 ½"), Ø60.3 (2″) and pipe outside diameters for zinc flow from Ø22 to Ø76. The machine is started at the push of a button and the pipe notcher is driven continuously. This allows the user to continue production without having to switch the machine on every time. Electrically driven With the motorized pipe notcher AL1-2U you can notch pipe outside diameters of Ø26.9 (3/4″), Ø337 (1″), Ø42.4 (1 ¼"), Ø48.3 (1 ½"), Ø60.3 (2″). Do you often notch pipes? Then the motor-driven pipe notcher AL1-2U with 2.2 kW electric motor is the solution for you! The motor forms a single unit with the special eccentric shaft that drives the punching tool. In addition, the motor is equipped with an on/off switch with 0-voltage protection and a protective cap.

Condition: good (used), functionality: fully functional, Year of construction: 1991, control type: manual, Indumasch notching machine model 204, adjustable range 30 - 140°, operational, including a set of replacement knives, for sale due to production changeover. Ljdpfxew U Rduo Akyerk

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei Ledpfx Aowiqlvekysrk 8700 € 167.91 € 250 mm 6 mm 3 mm 25 1/min 90 ° 4 kW 950 mm 780 mm 1115 mm 585 kg Hydraulic drive Automatic adjustment of the blade gap 2 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to "CE" regulations User manual in English or German

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, control type: manual, degree of automation: manual, actuation type: hydraulic, cutting angle (min.): 30 °, cutting angle (max.): 120 °, cutting force: 12.5 t, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, punching diameter: 105 mm, throat depth: 300 mm, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, Angle-adjustable notcher with punching station for use with standard Trumpf single tools. Lrsdoxv Sw Djpfx Akyjk

Condition: good (used), Year of construction: 1990, machine/vehicle number: V 254629, Offer 25311 Technical Data: Lrsdpfexqzirex Akyek - Cutting length: 250 mm - Cutting angle: 90° - Cutting capacity: - Mild steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate: up to approx. 55 / min - Table size: W 800 x D 800 mm - Working height: approx. 940 mm - Stops infinitely adjustable in length and angle - Drive: 400 V / 4 kW - Oil filling: 50 l - Electric foot pedal - Required space: approx. W 1300 x H 1250 x D 1300 mm - Weight: approx. 800 kg - Mobile base frame

Condition: used, Year of construction: 1996, machine/vehicle number: 206988, Order No. 24554 Technical Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm Lrjdpfx Aov Uytzskyjk - Continuous cutting angle adjustment from 30 to 135° - Stroke rate 60 rpm - Table support surface with T-slots 800 x 1000 mm - Depth stops with measuring scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - Electric - Foot switch - Space required approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1100 kg