Used Ingersoll-Rand Waterjet High Pressure Pump for sale (36,037)

Condition: used, Year of construction: 2011, operating hours: 3,690 h, functionality: fully functional, machine/vehicle number: W09D500THBAD43025, operating pressure: 500 bar, total length: 3,695 mm, high-pressure hose length: 50,000 mm, total height: 2,026 mm, total width: 2,050 mm, pressure: 500 bar, empty load weight: 1,695 kg, input voltage: 12 V, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 32.4 kW (44.05 HP), temperature: 150 °C, DGUV certified until: 11/2028, Dynajet 500TH 28 l/min at cold water Maximum pressure: 500 bar 3695 operating hours Recently serviced Imported to Sweden in 2026 Todjz Eg Dhspfx Ahmjc WITH HOT WATER UP TO 150°C!!!

Condition: excellent (used), Year of construction: 2005, MANUFACTURER: INGERSOLL RAND MODEL: NIRVANA N75 SERIAL NO.: 2770893 YEAR: 2005 POWER (kW): 75 CAPACITY (m3/min): 12.5 PRESSURE (bar): 10 HOURS (DOC/TOTAL): FREQUENCY INVERTER: yes BUILT-IN DRYER: no HEAT EXCHANGER: no Tjdpfjyk Unisx Ahmec COOLING (AIR/WATER): air

Condition: like new (used), Year of construction: 2009, operating hours: 100 h, functionality: unexamined, overall weight: 10,250 kg, total length: 5,000 mm, total width: 2,100 mm, total height: 2,400 mm, power: 530 kW (720.60 HP), fuel type: electric, operating pressure: 3 bar, Equipment: type plate available, Make Ingersoll Rand Model: CH6-C125MX1 Year of manufacturing: 2009 Serial no: V-7667 Working hours (on service meter): Low hours!! Capacity (Kw) 530 Voltage 400 Frequency (Hz) 50 Tsdov A T Uhopfx Ahmoc Rpm 2980 Amps (A) 920 Dimensions LxWxH (mm) 5000 x 2100 x 2500 Weight (kg) approx. 10250 Total quantity in stock 1 Capacity (m3) 7.66 Nm3/h Max. pressure (Bar) 2.8 Country of origin Italy Comments Almost Unused compressor

Condition: good (used), Year of construction: 2003, functionality: fully functional, pressure: 12 bar, overall weight: 400 kg, input voltage: 400 V, power: 4.3 kW (5.85 HP), high performance refrigeration dryer air dryer 22m3/min ingersoll-rand type: TS220 SS year of manufacture: 2003 air flow: max 22000 l/min; max pressure: 12 bar refrigerant: 407C gas - 3.5 kg mains voltage: 400v 50Hz 7.5 A connection: DN80 machine dimensions: length: 1010 Tjdpforfyrpsx Ahmsc width: 1500 height: 1310 weight: 400 kg Ambient temperature 2°C - 50°C Maximum inlet temperature 60°C IP classification IP 44 standard

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: C3.00202.1212, total width: 1,000 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,740 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 254 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 202 mounted on a base frame. Similar but not Kamat, Uraca, or Woma. Pump type: HDP 202 Operating pressure: 340 bar Flow rate: 254 l/min Drive speed: 1500 rpm Tsdpoyacaxofx Ahmjc Drive power: 157 kW with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x1000x1450 mm Weight: approx. 1740 kg Year of manufacture: 2023 Condition: In January 2026 new piston seals were installed and valves checked. In very good used condition.

Condition: used, Year of construction: 2003, Ingersoll Rand ML45 air compressor (2003), 2 units available. Condition: Used, technically sound, currently disconnected. Manufacturer: Ingersoll Rand (USA) Model: ML45 Year of manufacture: 2003 Quantity: 2 units Reliable industrial screw compressors designed for the stable supply of compressed air across various industries – manufacturing, metalworking, pneumatic tools, and automation systems. Key technical specifications (according to Ingersoll Rand ML45 catalogue): - Rated power: 45 kW - Air delivery: approx. 7.5–8.5 m³/min (depending on pressure) - Working pressure: 7–10 bar - Compressor type: oil-lubricated screw - Drive: direct Todpfx Ahjxu Achjmsc - Power supply: 400 V / 50 Hz - Cooling: air-cooled system - Noise level: approx. 72 dB(A) - Compressor weight: approx. 900 kg Condition description: Both units are currently disconnected but were operational prior to shutdown. Operating hour readings are unknown. Visually – in good technical condition, no damage.

Condition: used, Year of construction: 2011, operating hours: 8,176 h, functionality: fully functional, machine/vehicle number: WPUD500H0B2000955, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,070 mm, pressure: 500 bar, empty load weight: 1,630 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 34.5 kW (46.91 HP), DGUV certified until: 10/2026, Dynajet 500TH Tsdpfx Ahjz Egw Usmjc 30 l/min Maximum pressure: 500 bar 8176 operating hours Regularly maintained, recently serviced, not in operation during winter (only April–October) Owned by the same operator since new For cold water only; can be retrofitted for heating water.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: B5.00172.1454, total width: 850 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,700 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 239 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 172 mounted on a base frame. Similar, but not Kamat, Uraca, or Woma. Pump type: HDP 172 Operating pressure: 340 bar Flow rate: 239 l/min Drive speed: 1500 rpm Tsdpjyablmsfx Ahmoc Drive power: 147 kW with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x850x1450 mm Weight: approx. 1700 kg Year of manufacture: 2015 Condition: New piston seals installed and valves inspected in January 2026. In very good used condition.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1.811-943.0, high-pressure hose length: 45 mm, pressure: 230 bar, fuel: diesel, power: 6.8 kW (9.25 HP), temperature: 95 °C, For sale is a well-maintained and fully functional Kärcher HD 1000 DE hot water high-pressure cleaner, manufactured in 2020, from our commercial cleaning business. The machine is in good used condition and is ready for immediate use. It has been thoroughly cleaned and serviced before sale. The engine oil and the oil of the high-pressure pump have been replaced, and the air filter has been cleaned. The high-pressure cleaner features a robust Yanmar diesel engine and a diesel-fired hot water generator. The high-pressure pump, engine, and hot water operation function perfectly. An operating hour meter is not installed on the machine, therefore, operating hours cannot be specified. Reason for sale: The machine is being sold solely because we have now installed an equivalent hot water high-pressure system permanently in one of our vehicles. Therefore, this mobile unit is no longer needed. Inspection and a detailed test run under operating conditions are possible and expressly encouraged after scheduling an appointment. Technical data Tjdpfx Ajztut Ashmsc Manufacturer: Kärcher Model: HD 1000 DE Article number: 1.811-943.0 Year of manufacture: 2020 Drive: Yanmar diesel engine Displacement: 435 cm³ Engine power: 6.8 kW at 3,600 rpm Working pressure: approx. 190 bar Max. pressure: 230 bar Flow rate: 15 l/min (900 l/h) Max. water temperature: 98 °C Burner output: 59 kW Weight: approx. 197 kg Operating hours: not readable / no operating hour meter available Extensive Kärcher accessories included The machine is sold as a complete, ready-to-use package: * Kärcher EASY!Force Advanced high-pressure gun * High-pressure lance with pressure regulation * Kärcher EASY!Lock system * 30 m high-pressure hose * additional 15 m high-pressure hose * coupling to connect both hoses - allowing up to 45 m hose length * Rotating nozzle / rotor nozzle * Flat spray nozzle * Kärcher eco!Booster TR 50 * integrated hose reel Especially the combination of the 45 m high-pressure hose, EASY!Force Advanced, and the different nozzles makes the machine interesting for larger areas and professional applications. Maintenance performed before sale: * Engine oil replaced * High-pressure pump oil replaced * Air filter cleaned * Machine completely cleaned * High-pressure function tested * Hot water / burner function tested * Functional test performed The machine is in perfect technical condition and ready for immediate use. Suitable for, among other applications: Commercial cleaning, facade cleaning, industrial and hall cleaning, construction companies, agriculture, agricultural machinery cleaning, municipal services, and other professional high-pressure and hot water cleaning tasks. Location: 45966 Gladbeck, North Rhine-Westphalia Inspection and test run: Possible and expressly desired after prior appointment. Sale by a commercial enterprise. An invoice with VAT will be issued.

Condition: excellent (used), Unused Ingersoll Rand QM Series Nut Runner - interconnecting cable and controller Tsdpfx Ahewric Ejmec

Condition: used, Year of construction: 2006, operating hours: 4,803 h, functionality: fully functional, machine/vehicle number: WPUD500H062000449, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,080 mm, pressure: 500 bar, type of input current: DC, empty load weight: 1,620 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 32 kW (43.51 HP), DGUV certified until: 09/2026, Dynajet 500TH 30 L/min Tjdpfx Ahsz Egmcomoc 500 bar 4800 operating hours Regularly maintained, recently serviced, not operated in winter (only April–October) New engine installed in September 2026, invoice available Imported to Sweden from Germany in 2021.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 62006941, operating pressure: 220 bar, total length: 1,200 mm, high-pressure hose length: 10,000 mm, total height: 1,120 mm, total width: 800 mm, pressure: 220 bar, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 420 kg, warranty duration: 12 months, fuel tank capacity: 70 l, power: 13 kW (17.68 HP), temperature: 95 °C, volume flow: 1.56 m³/h, noise level: 104 dB, pressure (max.): 500 bar, Equipment: chassis, The DYNAJET 220mdh is a compact hot- and cold-water high-pressure cleaning unit designed for demanding professional cleaning applications where reliability, flexibility, and long service life are essential. Delivering up to 220 bar operating pressure and a flow rate of up to 26 l/min, the machine provides efficient cleaning performance across a wide range of industrial, municipal, and service applications. Designed as an installation module, the 220mdh can be permanently integrated into service vehicles, trailers, or other customized cleaning solutions. Its compact dimensions, durable industrial components, and proven Kubota diesel engine ensure dependable day-to-day operation even in demanding environments. The integrated hot-water system provides water temperatures of up to 95°C, making the machine ideal for the removal of grease, oil, heavy dirt, and other stubborn contaminants. Adjustable pressure and flow settings allow the operator to adapt the machine to different cleaning tasks while optimizing fuel consumption and minimizing wear. Its robust powder-coated steel frame, ceramic triplex plunger pump, frost protection system, and CE-certified safety features make the DYNAJET 220mdh a reliable investment for professional users who require consistent cleaning performance and maximum uptime. Key features and advantages: * Up to 220 bar operating pressure * Flow rate up to 26 l/min * Hot water temperature up to 95°C * Reliable Kubota 3-cylinder diesel engine approved for HVO100 * Powerful hot-water system with up to 115 kW heating capacity * Compact installation module for vehicles, trailers, and stationary solutions * Robust powder-coated steel frame for long service life * Ceramic triplex plunger pump for maximum durability Tedpfx Aoz Dgz Djhmec * Frost protection system and water supply monitoring for reliable operation in all seasons * CE-certified safety standards * New machines – fully functional and ready for operation Please contact us for further information, pricing, or availability.

Condition: good (used), Year of construction: 1995, operating hours: 1,174 h, functionality: fully functional, pressure: 1,070 bar, operating pressure: 1,070 bar, fuel: diesel, power: 117.68 kW (160.00 HP), water pressure: 1,070 bar, pump capacity: 51 l/min, Good working Kamat high pressure pump Todpfjrpmiasx Ahmec

Condition: excellent (used), Year of construction: 2014, operating hours: 26,000 h, functionality: fully functional, overall weight: 1,603 kg, power: 55 kW (74.78 HP), 2014 Ingersoll Rand R55i Compressor Todszrxhhopfx Ahmec 55kw screw compressor Full service history Approx 26k hours Very good condition

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, General overhauled OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and optical condition. The machine has been comprehensively and professionally overhauled in our workshop and is in very good condition both technically and visually. Tedpfxoyrqpfj Ahmoc During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good cosmetic condition. The generator and control unit were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is immediately ready for operation and is ideal for reliable production. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2009 Control system EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Generator output 60 amps, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 30.09

Condition: used, Year of construction: 2020, operating hours: 555 h, functionality: fully functional, machine/vehicle number: 62006148, operating pressure: 1,000 bar, total length: 1,160 mm, high-pressure hose length: 1,000 mm, total height: 1,300 mm, total width: 800 mm, pressure: 1,000 bar, input voltage: 400 V, fuel: electricity, overall weight: 560 kg, water tank capacity: 20 l, power: 30 kW (40.79 HP), input current: 63 A, noise level: 104 dB, pressure (max.): 500 bar, input frequency: 50 Hz, Equipment: chassis, crane, Used DYNAJET 1000me 400V/50Hz/63A – 1000 Bar High-Pressure Water Jetting System – Only 555 Operating Hours This well-maintained DYNAJET 1000me high-pressure water jetting unit is available for immediate sale. With only 555 operating hours, the machine remains in excellent condition and is ready for demanding industrial cleaning and surface preparation applications. Delivering up to 1000 bar (14,500 PSI) and a flow rate of 17 l/min, the DYNAJET 1000me is designed for professional users who require maximum pressure performance combined with reliable day-to-day operation. The robust four-wheel trolley design ensures easy transportation and flexibility on site, while the industrial-grade construction provides outstanding durability even in harsh working environments. The machine is equipped with a powerful 30 kW electric motor, industrial crankshaft pump, stainless-steel water filtration system, operating-hours meter, automatic motor protection, and DYNAJET's innovative dry-stop pistol technology for improved operator safety and ease of use. Included with the machine: *1 x 1000 bar high-pressure gun *Nozzle holder Todpfxoz Dgt Ts Ahmjc *Rotating nozzle *High-pressure nozzle *10 m high-pressure hose *Original DYNAJET machine *Only 555 operating hours The DYNAJET 1000me is particularly suitable for: Industrial cleaning Surface preparation Coating and paint removal Concrete renovation work Ship and offshore maintenance Tank and container cleaning Heavy-duty maintenance applications Technical specifications: *Working pressure: 1000 bar (14,500 PSI) *Flow rate: 17 l/min *Electric motor: 30 kW *Voltage: 400V / 50Hz / 63A *Pump type: Triplex plunger pump *Water tank: 20 L *Motor protection: IP54 *Dimensions (L × W × H): 116 × 80 × 130 cm *Weight: approx. 560 kg *Operating hours: 351 h *Key features and advantages: *Only 351 operating hours *1000 bar ultra-high pressure performance *Robust industrial trolley construction *High reliability and long service life *Electric drive with low operating costs *Included 1000 bar gun, nozzle holder, nozzle, and 10 m hose *Immediate availability *Fully functional and ready for operation Please contact us for additional information, photos, pricing, or inspection arrangements.

Condition: used, Year of construction: 2010, fuel type: diesel, power: 88 kW (119.65 HP), gearing type: mechanical, color: white, number of standing places: 3, Equipment: 3rd hydraulic function, ABS, airbag, all-season tires, lighting, trailer coupling, I am offering a Peugeot Boxer diesel panel van, 2.2 / 88 kW, first registered in July 2010, with 171,000 km, a 6-speed manual transmission, and a trailer hitch. It is being sold because I am switching to different technology. !The vehicle does not have a valid MOT (technical inspection), is registered, and is ready to drive. It has green license plates! The vehicle is equipped with a belt-driven auxiliary drive and a Dynaset HPW hydraulic high-pressure water pump. Tedpfx Aezwmfrjhmoc It includes a high-pressure cleaning system up to 180 bar, a high-pressure lance, a 1000-liter tank, and automatic hose retraction. Signs of wear are present.

Condition: like new (used), Edwards Edwards iXH4545H – Industrial High Vacuum / Dry Pump For sale is an Edwards iXH4545H, version MK1 HV MM96 Black EMS. This unit originates from a technical company environment and is part of Edwards’ high-performance iXH series, which is used globally in industrial high vacuum and coating processes. Technical Data Manufacturer: Edwards Tedpfxszixyfs Ahmoc Model: iXH4545H Version: MK1 HV MM96 Black EMS Weight: approx. 890 kg Technical Specifications (iXH Series) Dimensions: approx. 1,240 × 860 × 1,310 mm (L × W × H) Pumping speed: up to approx. 4,500 m³/h (depending on gas & configuration) Ultimate pressure: < 1 × 10⁻² mbar Inlet: ISO 100 / ISO 160 Outlet: KF 40 / NW 40 Power supply: 400–480 V, 3-phase Power consumption: typical 12–18 kW Cooling: water-cooled (approx. 6–10 L/min) Description: The Edwards iXH4545H is an industrial high vacuum/dry pump from the 4500 series. It is typically used in: • PVD / CVD coating • Semiconductor industry • Process chambers / vacuum furnaces • Research & development • High gas load applications • Chemical/corrosive process gas environments The iXH series is renowned for its high reliability, robust construction, and 24/7 operational capability. Weight: approx. 890 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, OPS Ingersoll Gantry Eagle 500 die-sinking EDM machine in very good condition. 3R clamping system Tsdpfxsx Htfyo Ahmjc Year of manufacture: 2017. Inspection under power possible.

Condition: good (used), Year of construction: 2020, operating hours: 217 h, functionality: fully functional, machine/vehicle number: 62006078, operating pressure: 2,800 bar, total length: 4,670 mm, high-pressure hose length: 10,000 mm, total height: 2,540 mm, total width: 1,970 mm, pressure: 2,800 bar, empty load weight: 2,750 kg, fuel: diesel, overall weight: 2,750 kg, water tank capacity: 160 l, fuel tank capacity: 200 l, power: 160 kW (217.54 HP), volume flow: 1.62 m³/h, noise level: 111 dB, Equipment: crane, DYNAJET UHP 220 2800 | 2020 | Low Hours This DYNAJET UHP 220 2800 from 2020 is available in excellent condition and has only 396 engine hours and 216 high-pressure hours, making it a highly attractive alternative to a new unit. Delivering up to 2,800 bar and 27 l/min, the UHP 220 is designed for the most demanding water jetting applications, including paint removal, rust removal, concrete rehabilitation, and industrial surface preparation. Powered by a reliable 220 HP Volvo industrial diesel engine, the machine combines exceptional performance with low operating costs and proven durability. The integrated DYNAJET Easy Control II system allows precise pressure adjustment and simple operation, while the twin-axle trailer ensures easy transport between job sites. With its low operating hours and robust DYNAJET construction, this machine is ready for immediate work and many years of productive service. Key Features and Advantages: *Model year 2020 *Only 396 engine hours *Only 216 high-pressure hours *Operating pressure up to 2,800 bar *Maximum flow rate 27 l/min Todsz D Ew Rjpfx Ahmoc *220 HP Volvo industrial diesel engine *DYNAJET Easy Control II with colour display *Low-speed high-pressure pump with carbide plungers *Large fuel tank for extended operation *Twin-axle trailer for easy transport *Ideal for paint removal, rust removal and concrete removal *Fully operational and ready for immediate use For pricing, availability, or further technical information, please contact us.

Condition: used, Year of construction: 2015, operating hours: 5,201 h, functionality: fully functional, machine/vehicle number: W09HKF1011SHB8027, operating pressure: 550 bar, total length: 3,950 mm, high-pressure hose length: 50 mm, total height: 1,880 mm, total width: 1,870 mm, empty load weight: 1,200 kg, fuel: diesel, heating capacity: 0 kW (0.00 HP), overall weight: 1,800 kg, water tank capacity: 500 l, noise level: 93 dB, DGUV certified until: 03/2027, Oertzen PT500 30 l/min Maximum pressure: 500 bar 5200 operating hours Tsdpfez Ega Nox Ahmjc Regularly maintained, recently serviced, not operated in winter (only April–October) Owned by the same operator since new For cold water only; heating element has been removed.

Condition: used, Year of construction: 2019, operating hours: 3,420 h, functionality: fully functional, machine/vehicle number: W09FAL226KMF14072, operating pressure: 500 bar, total length: 2,700 mm, total height: 2,100 mm, total width: 2,100 mm, pressure: 500 bar, empty load weight: 2,600 kg, input voltage: 12 V, fuel: diesel, heating capacity: 198 kW (269.20 HP), overall weight: 2,600 kg, water tank capacity: 400 l, fuel tank capacity: 220 l, temperature: 100 °C, volume flow: 1.8 m³/h, noise level: 100 dB, pressure (max.): 500 bar, Falch Trail jet 30 500-30-95-d high-pressure cleaner, year of construction 2019. The machine runs at a pressure of 100 - 500 bar and a temperature of 10⁰c - 100⁰c. Its has a remote control feature to remotely control temp, pressure and on and off. Also it comes with the front storage box. The machine has been fully serviced and maintained by falch. It has been well looked after with one owner from new. Todpfxoy Sazfo Ahmjc Manufacturer: Falch Model: Trail jet 30 500-30-95-d Construction year: 2019 Serial number: G57200378 EU type number: e1*2007/46*0386*01 Identification number: W09FAL226KMF14072 Weight: 2600 kg Vertical load: 120 kg Axle 1 load: 1300 kg Axle 2 load: 1300 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2012, Ingersoll Rand screw compressor Tedpou Ic Ryefx Ahmec 225 Kw Year 2012

Condition: as good as new (ex-display), Year of construction: 2022, High-pressure cleaner PTC Easypower E, similar to but not a Dynajet, Oertzen, Falch, Woma, Kamat, Denjet, Kärcher, Dibo, etc. - Operating pressure: 300-700 bar - Flow rate: 15-30 l/min - Motor: Electric 32A/63A, 3-phase 400V-50Hz 20-30 HP / 15-22.5 kW, 1450 rpm / 1750 rpm - Dimensions: 1,000 x 750 x 850 mm - Dry weight: approx. 180/210 kg - High-pressure pump: Comet three-piston pump with ceramic pistons - High-quality frame made of painted steel with corrosion protection - Covers made of stainless steel - Holder for gun with lance Tsdpfx Ajfdz E Hohmsc - Trolley with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage power supply (24V) and control unit with star-delta starter - Safety switch with thermomagnetic relay for motor protection - Operating hour counter - 4 industrial wheels, 320 mm - Direct water intake via self-priming pump - Stainless steel relief valve with pressure relief system and EASY START system - 100 mesh water filter with easily replaceable cartridge - Incl. 20 m high-pressure hose with stainless steel quick-release couplings, spray gun, 1200 mm stainless steel lance, and flat jet nozzle 15° The following models are available: Easy Power E 30/300 | 30 l/min, 300 bar | 18.5 kW Easy Power E 15/500 | 15 l/min, 500 bar | 15 kW Easy Power E 21/500 | 21 l/min, 500 bar | 22 kW Easy Power E 15/700 | 15 l/min, 700 bar | 22 kW

Condition: excellent (used), Year of construction: 2017, operating hours: 4,000 h, functionality: fully functional, operating pressure: 2,500 bar, Used Falch Trail Jet 125 high-pressure washer with 2500 bar pressure. The unit is in very good technical condition and ready for operation. Included with the device are the following items: - 3 new Falch high-pressure hoses - 3 used Falch high-pressure hoses - 3 control cables for connecting the Falch gun - New Falch 4-nozzle rotary head - Falch gun - 3 lance extensions for the Falch gun - Additional components for the machine: sets of seals, filters, etc. The machine has been serviced at the Falch headquarters and has operated for 5 hours since service. Machine data: Year of manufacture: 2017, power: 129 kW, Deutz engine. The machine allows for adjustable working pressure. Todpfsxzk U Ssx Ahmsc