Used Kannegiesser Gf 1750-880-800 for sale (9,989)

Condition: good (used), Year of construction: 1995, functionality: fully functional, The perfect retrofit machine! Mechanically in phenomenal condition! Prodpfjy Hfm Njx Amxeb This machine can be inspected under power until 12.05.2026 and will then be dismantled due to space constraints. Please refer to the attached KLINGELNBERG inspection reports available for download. Gleason P 800 Year of manufacture: 1995 Control: SIEMENS 840 C (discontinued) Condition: Mechanically in excellent condition Functionality: Fully operational Inspection: Available under power Technical Data: Nominal workpiece diameter: 800 mm Max. workpiece diameter: 800 mm Max. workpiece diameter, special version: 1,200 mm Nominal module: 20 / 30 mm Nominal module, special version: 25 / 35 mm Drive power: 35 kW Drive power, special version: 52 kW Cutter head speed range: 20 - 200 rpm Cutter head speed range, special version: 26 - 265 rpm Additional cutter head speed range, special version: 36 - 360 rpm Cutter head swivel range: +30 / -45 degrees Cutter head dimensions (standard cutter head), diameter/length: 350 / 375 mm Min./max. center distance workpiece/tool: 50 / 600 mm Center distance workpiece/tool, special version: 50 / 800 mm Max. axial slide travel: 700 mm Max. axial slide travel, special version: 1,000 mm Max. axial slide travel, special version: 1,300 mm Lowest cutter head position above table: 450 mm Table diameter: 800 mm Table bore diameter: 245 mm Table bore depth: 875 mm Max. table speed: 15 rpm Max. table load: 10,000 kg Machine dimensions: Width A: 5,800 mm Length B: 6,900 mm Height C: 4,700 mm Machine weight: 22,000 kg Regarding the current KLINGELNBERG gear inspection data BEFORE grinding: "Pitch and lead are inconspicuous. One measurement shows a borderline or slightly out-of-tolerance fHα deviation in the profile. Please check whether this value is permissible according to the drawing/customer approval or if correction/rework is required. The gears were always forwarded for grinding to the RZ 1000 REISHAUER and processed accordingly. Nevertheless, overhaul of the C-axis is recommended. A cost estimate from GLEASON PFAUTER LUDWIGSBURG is available. Estimated cost: 10,000 EUR."

Condition: used, Bongard MG Range Gas or oil-fired, depending on configuration Heating power: 110 kW Gas connection: 3/4" galvanized pipe Trolley: 800 × 1000 mm Trolley: 780 × 980 mm Maximum load: 200 kg 180 to 216 baguettes (250 g each) 18 levels for baguettes 108 to 135 loaves (400 g each) 15 levels for loaves Stainless steel baking chamber Rotating tray Pulsed steam injection Maximum temperature: 280 °C Power supply: 3N~400 V Electrical protection: 16 A Water pressure: 2.5 to 4 bar Water connection: 3/8" or 12/14 mm pipe Oil connection: 10/12 mm copper pipe Smoke exhaust: Ø 200 mm Dimensions: 2251 × 2062 × 2492 mm Depth with door open: 2774 mm Minimum door opening: 1020 mm Net weight: 1830 kg Key advantages Capacity of 180 to 216 baguettes (250 g each) Production of 108 to 135 loaves (400 g each) Pedpfx Amszyafdjxerb Rotating trolley loaded up to 200 kg Baking chamber entirely made of stainless steel Adjustable blowing vents Two valves for programmable steam evacuation Retractable and removable ramp for loading Front access to the burner and technical components Reinforced door with double-glazed, ventilated glass, removable

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 00820002981, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 3,600 rpm, spindle bore: 118 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 102 mm, total height: 2,500 mm, total length: 8,000 mm, total width: 2,400 mm, overall weight: 10,000 kg, controller manufacturer: DMG, controller model: ERGOLINE, input voltage: 400 V, input frequency: 50 Hz, input current: 125 A, nominal power (apparent): 74 kVA, operating hours of spindle: 4,439 h, Equipment: chip conveyor, DMG MORI CTX BETA 800 TC CNC turning and milling center - Note: the spindle hours may increase slightly! - Swing diameter: 500 mm - Distance between centers: 1020 mm - Max. workpiece weight (chuck parts/chuck weight): 100 kg - Max. workpiece center of gravity from spindle flange: 120 mm - Travel X1: from -10 to 490 mm - Travel Y1: +-100 mm - Travel Z1: 845 mm - Travel Z2: 600 mm - Travel Z3: 800 mm - Spindle flange diameter: 220 H 5 mm - Chuck diameter: 315 mm - Diameter of front bearing: 160 mm - Rapid traverse speed, Z-axis: 40 m/min - Resolution, Z-axis: 0.001 mmm Pjdpfxjzxx Dcs Amxerb - B-axis max. swivel speed: 70 rpm - Angular resolution: 0.001° - Tailstock travel: 800 mm - Quill force: 8 kN The machine is equipped with a tailstock and a three-jaw chuck, diameter: 250 mm, as well as a chip conveyor and coolant system. FCA D-63843 Niedernberg - loaded onto a truck.

Condition: new, functionality: fully functional, gearing type: other, color: orange, emission class: none, brakes: other, suspension: other, Year of construction: 2026, driver cabin: other, Equipment: all wheel drive, fog lights, low noise, The TICAB RA 800 Asphalt Recycler is a professional mini asphalt plant designed for hot mix asphalt production, asphalt recycling, pothole repair, crack filling, road resurfacing, patching, and pavement maintenance. This versatile unit reuses reclaimed asphalt pavement (RAP) to produce high-quality hot mix asphalt directly on-site, saving materials, energy, and costs. Ideal for municipalities, contractors, industrial sites, highways, parking lots, and urban road maintenance projects. Key Features: Psdpfxex U Sv Tj Amxsrb • Mini asphalt plant & asphalt recycler RA 800 for on-site hot mix asphalt production and RAP recycling • Compact, mobile, and easy to operate on construction sites, municipal roads, highways, parking areas, driveways, bike paths, and industrial pavements • Diesel-fired heating system with precise temperature control for consistent hot mix quality • Output capacity: up to 800 kg/h for medium-scale repairs • Supports bitumen emulsion, tack coat, and recycled asphalt pavement (RAP) • Durable, robust construction for long-term heavy-duty use • Designed for road contractors, paving companies, municipalities, and civil engineering works Applications: • Asphalt recycling and RAP processing • Road repair, pothole patching, crack filling, and resurfacing • Hot mix asphalt production and transport • Municipal streets, highways, parking lots, driveways, and industrial surfaces Why Choose TICAB RA 800: The TICAB RA 800 Asphalt Recycler combines mini asphalt plant capability with on-site recycling efficiency, allowing contractors and municipalities to produce high-quality hot mix asphalt, reduce material costs, and maintain durable road surfaces. Compact, reliable, and versatile, the RA 800 is the perfect choice for all asphalt repair, resurfacing, and pavement maintenance projects. Contact us now for price, delivery options, and full technical specifications. Start producing and recycling asphalt efficiently today!

Condition: used, mileage: 5,700 km, power: 592 kW (804.90 HP), fuel type: gasoline, gearing type: automatic, first registration: 04/2025, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, second-hand vehicle warranty, soot filter, G63 AMG, fully equipped: additional features: Performance upgrade to 800 hp Prodpfx Aoyq U Aajmxob H&R lowering springs Complete vehicle wrapped in transparent, self-healing XPEL film (including headlights and side skirts) 3-layer ceramic coating on vehicle, rims, and brake calipers Hesreller warranty until 04/2027 Inspection service due in 04/2026 at 4200 km Equipment: B01 48V TECHNOLOGY B24 Remote control for auxiliary heating B61 AMG DYNAMIC SELECT CK0 AMG-specific exhaust system in black C51 Illuminated door sills, 4-piece, in stainless steel FL0 Partition net FM2 Warning vests for driver and passenger GK2 MANUFAKTUR logo package in black E20 MANUFAKTUR logo projector in the exterior mirror T91 MANUFAKTUR door handle in black with logo embossing G44 AMG SPEEDSHIFT TCT 9G L6J AMG Performance steering wheel in Nappa leather PAZ AMG Night Package I ICS1 Mercedes star front and rear in high-gloss black 7U1 AMG emblem on the hood in dark chrome 7U8 Typography in high-gloss black PBG MBUX Navigation Premium PK1 Comfort Package 231 Garage door opener 311 Temperature-controlled cup holder 889 KEYLESS-GO 897 Wireless charging system for mobile devices in the front PK2 Active Multicontour Seat Package Plus PBR ENERGIZING Package Plus HA1 Ionization of the interior air PT1 Technology Package PA8 Parking Package with 360° camera 04U Transparent hood 501 360° camera P79 Assistance Package 234 Blind Spot Assist 239 Active Distance Assist DISTRONIC 266 Active Steering Assist 273 Exit warning function PT3 AMG Performance Package A22 AMG ACTIVE RIDE CONTROL suspension BS2 AMG brake calipers, red painted, front and rear RG4 55.9 cm (22") AMG forged wheels in cross-spoke design 250 AMG Driver's Package 256 AMG TRACK PACE PW1 Heat Comfort Package 443 Steering wheel heating 597 Heated windshield P77 SUPERIOR Line interior JC1 Instrument panel in Nappa leather 414 Sliding sunroof 810 Burmester® 3D surround sound system P82 GUARD 360° vehicle protection Plus 551 Anti-theft alarm system with pre-equipment for collision detection 882 Interior protection Q55 Trailer coupling with ESP® trailer stabilization RS1 Spare wheel on the rear door S39 MANUFAKTUR safety belts in red S81 Diamond design T81 MANUFAKTUR running boards in black U19 MBUX Augmented Reality for navigation U82 2 USB ports in the rear U88 AMG steering wheel buttons VG0 Set of rubber floor mats V36 MANUFAKTUR grab handles in leather V42 AMG floor mats black Y51 Loading edge protection in stainless steel ZG6 AMG interior trim in carbon ZT7 Trim element in the grab handle with "MANUFAKTUR" lettering 01Q LOW RANGE 01U Pre-equipment for navigation services 02B Owner's manual and service booklet - German 02Q 100% differential lock 06Q OFFROAD COCKPIT 14U Smartphone integration 20U Pre-equipment for digital key transfer 22U MBUX Entertainment 220 Parking assistant PARKTRONIC 228 Auxiliary heating 235 Active Parking Assist with PARKTRONIC 243 Active Lane Keeping Assist 299 PRE-SAFE® system 32U Sound personalization 34U Remote Services Premium 351 Mercedes-Benz emergency call system 355 Extended functions MBUX 362 Communication module (LTE) for the use of digital extras 365 Hard disc navigation 367 Pre-equipment for Live Traffic Information 475 Tire pressure monitoring system 51B Rating country set EURO-NCAP 513 Traffic sign assistant 534 MBUX multimedia system 537 Digital radio 6U6 AMG fuel tank cover 628 Adaptive Highbeam Assist Plus 642 MULTIBEAM LED 773 AMG Carbon Package Exterior B28 AMG exterior mirror housings in carb

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical Data Year of manufacture: 2006 Clamping Unit Clamping force: 8000 kN Max. platen size: 1520 mm Clear tie-bar distance: 1170 mm Min. mold height: 700 mm Max. mold height: 1300 mm Prsdpsx Up Utjfx Amxob Max. platen opening: 2300 mm Max. opening stroke/mold height: 1000 mm Ejector stroke: 300 mm 1st Injection Unit Screw diameter: 105 mm Shot volume: 4160 ccm 2nd Injection Unit Screw diameter: 90 mm Shot volume: 3050 ccm

Condition: excellent (used), Year of construction: 2011, operating hours: 1,703 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, tank capacity: 800 l, OPS INGERSOLL Gantry Eagle 800 year of manufacture: 2011 travel: x, y, z 550 x 850 x 450 mm control: Eagle Power Tec electrode changer: 20 pieces 3D probe 3D probe on the table magnet: 400 x 200 mm C-axis EROWA clamping system Psdpfx Aezgt Rmsmxerb fire extinguishing system remote control chiller includes approximately 600/700 liters of dielectric fluid includes drawer cabinet with contents documentation machine is powered on for inspection

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 0700922, input voltage: 400 V, type of input current: three-phase, KÖNIG ECO TWIN 800 WITH CLASSIC REX T6/5S SK58 – 2018 Complete König line for the automatic production of rolls and bakery products. Year: 2018 The line consists of a König Classic Rex T6/5S dividing-rounding machine combined with an Eco Twin 800 pre-fermentation and shaping line. Features: * Manufacturer: KönIG * Model: Eco Twin 800 * Year: 2018 * Dividing head: Classic Rex T6/5S * Piston size: SK58 * Weight range: 35 to 85 g * Operation in 5 or 6 rows * Nominal width: 800 mm * Eco Twin capacity: * Up to 5,040 pieces/hour in 6 rows * Up to 4,200 pieces/hour in 5 rows * Maximum capacity of the Classic Rex head: * Up to 9,000 pieces/hour in 6 rows * Up to 7,500 pieces/hour in 5 rows * Integrated pre-fermentation * Siemens Simatic control * Integrated elongation roller * Automatic product depositing onto baking sheets * Several interchangeable stamping tools available * Quick tool changes * Cutting/stamping station depending on configuration Products that can be produced: The line allows for the production of a wide variety of rolls, including: * Round rolls * Stamped rolls * Kaiser rolls * Cut rolls * Elongated rolls * Elongated and cut rolls * Elongated and stamped/pressed rolls * Double rolls * Various special shapes depending on the stamping tool used Several stamping tools are available with the line. The Eco Twin is a compact and versatile line that allows for the production of a wide variety of products with quick changeover times. Pjdpfxezyv Nre Amxerb Machine can be viewed and tested by appointment. Photos, videos, and additional technical information available upon request. Photos taken before cleaning.

Condition: used, Niles Centre Lathe, Type DLZ800 LIV5000, Approx 5.2m Between Centres x 860mm Swing Over Bed, 250mm Swing Over Saddle, Fitted with 750mm 4 Jaw Chuck, 2 Fixed Steadies Steadies, Total Weight 7 Tons, Serial No Specifications: Pjdpfxjzvrrhj Amxerb Swing: 1,000 mm Centers: 8,000 mm

Condition: used, Universal Milling Machine MAHO MH 800 Podezy Rtlepfx Amxsrb Travel X: 700 mm Travel Y: 450 mm Travel Z: 450 mm Spindle SA 40 Spindle exit : 125 mm Spindle speed: from 32 to 1600 RPM Table size: Length 1050 mm x Width 620 mm Manual table travel: 225 mm Table rotation at 360° Swivel table at +/- 30° Scale 3 axes ACU-RITE Sensory drilling Feeds spindle not working Clutch speed used Lubricant pump Voltage: 380 V Width: 2000 mm Depth: 2100 mm Height: 2500 mm Weight: 3 T

Condition: good (used), filter area: 75 m², pressure: 15 bar, System: used chamber filter press ( refurbished ) Design: side rail guided Construction: optional according to customer requirements, e.g. also mounted in a container Filter plate format: 800x800 mm Number of plates: 68 Filter plates: PP Cake thickness: 30 mm Drain: closed Filter cloths: optionally available depending on the medium Filter area: approx. 75.21 m² Press capacity: approx. 1081.2 dm3 Plate pack length: approx. 4243 mm Filter pressure: approx. 15 bar Plate transport: manual Plate closure: electro-hydraulic plate closure Safety equipment: optional according to customer requirements and design Accessories: optional as special accessories Control cabinet: optional Electrics: electrical wiring of all consumers optional. Pump technology: optional Condition: refurbished Prsdpfx Amoqakhujxob Purchase or rental: Viewings of the systems by arrangement at our factory. Would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Condition: good (used), Year of construction: 1980, filter area: 98 m², pressure: 15 bar, cake thickness: 25 mm, Plant: used mobile chamber filter press / filter press Manufacturer: Filox 800 x 800 Year of construction: 1980 Plate size: 800 x 800 mm Effective length: 5200 mm Number of chambers: 88 pieces Cake thickness: 25 mm Filter pressure: 15 bar Prjdpfsqa Dtqjx Amxsb Closing pressure: Min. 300 bar, max. 320 bar Total filter area: approx. 98 square meters Total cake volume: approx. 1100 liters Motor voltage: 380 V, 50 Hz Protection class: IP 44 Plate material: PP Drain: open Operating side: left Cloths: Optional

Condition: used, total length: 1,400 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 500 kg Price: On request Granulator Dreher S26/26 VS Machine No. K 8329 Built in 1982 Engine 5.5kW Speed 1440 Rpm. 2 fixed blades 3 rotating blades (need to be replaced) Funnel opening: 360x240 mm Interchangeable strainer Sieve holes 6mm - Documentation available: No - CE certificate present: No - Main motor power [kW]: 5.5 Pjdpswh Naijfx Amxerb - Rotation speed [rpm]: 1440 - Opening width [mm]: 360 - Opening length [mm]: 240 - Sieve perforation [mm]: 6 - Number of rotating knives [pcs.]: 3 - Number of fixed knives [pcs.]: 2 - Transport dimensions: 1400mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2001, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain TNC 426, total height: 2,750 mm, total length: 4,050 mm, total width: 2,250 mm, table width: 490 mm, table length: 1,000 mm, table load: 750 kg, overall weight: 4,200 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 665 mm, spindle motor power: 13,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, rotational speed infinitely variable, Travel X/Y/Z 800/510/600 mm, Control HEIDENHAIN TNC 426, spindle power 13 KW, spindle speed 5-12'000 rpm, ISO40, table size 490x1000 mm, max. table load 750 kg, tool changer 30 places, dimension 40500x2250x2750 mm, weight ca. 4200 kgs, accessoires Renishaw OMP60 tool prove, coolant through spindle 20 bar, chip conveyor, tool holders, manuals Prsdpfx Amezblfgexsb

Year of construction: 2011, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MY15339, Diesel generator set, consisting of an MTU diesel engine and a Marelli three-phase generator. Engine data: Manufacturer: MTU Friedrichshafen GmbH Model: 12V 2000 G65 Year of manufacture: 2011 Power output: 695 kW Speed: 1,500 rpm Design: 12-cylinder V-diesel engine Displacement: approx. 23.9 liters Weight: 2,450 kg Predpfx Amjzzxa Aoxjb Generator data: Manufacturer: Marelli Motori Type: MJB 400 LB4 B34 Serial number: MY15339 Rated apparent power: 1,150 kVA Voltage: 525 V Rated current: 1,265 A Frequency: 50 Hz Power factor: cos φ 0.8 Operating mode: S1 – continuous operation Protection class: IP23 Insulation class: H Weight: 2,750 kg 40 ft hc container

Condition: used, Year of construction: 2015, functionality: fully functional, input voltage: 400 V, Used baguette long moulder model FVF 800 Weight range approx. 50 – 1200 g Output/hour approx. 1,200 pieces - Stainless steel housing - Mobile undercarriage - Various new parts (bearings, drive shaft, main switch, new belts) - Technically inspected, cleaned Podpfsy N S Dyex Amxsrb Fully functional (Photos = sample model) All prices are net plus VAT, ex works Syke. Available at short notice (shipping possible at buyer's cost) Advance payment required with order We operate exclusively under our General Terms and Conditions. Subject to prior sale, technical modifications, and errors.

Condition: repair required (used), Year of construction: 2009, 5-axis CNC machining center – universal – Manufacturer: RÖDERS Machine model: RXP 800 DS Year of manufacture: 2009 TECHNICAL DATA Predpjzt Rd Dsfx Amxob Travels - X-axis (mm): 475 - Y-axis (mm): 600 - Z-axis (mm): 400 - A-axis (swivel table): +/- 95 - C-axis (rotary table): 360 EQUIPMENT FEATURES + RC 4 automation + Chip conveyor

Condition: used, Drying tunnel for Impregnirka with CM Macchine RMS 40x800 discharge system. Tunnel length: 7800 mm Prsdpfx Aoz Aiv Rsmxjb Width: 310 mm Side material discharge.

Condition: excellent (used), functionality: fully functional, Working width: 800 mm Maximum element height: 100 mm Manual adjustment of roller spacing Podpfx Asz Agvhemxsrb Simultaneous application of adhesive to the top and bottom surfaces

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC turning machine Okuma LB 3000 EX II MYW 800 Control system: OSP-300L Year of manufacture: 2014 Internal machine number: 75 Distance between centers or spindle noses: 1085 mm Turning diameter over slide/bed: 340 / 580 mm Psdpszz Ihvofx Amxorb Travel in X-axis: 260 mm Travel in Y-axis: 115 mm Travel in Z-axis: 1,010 mm Travel in C-axis: 360 mm Travel in W-axis: 895 mm Spindle bore: 72 mm Main spindle speed: 45 - 5,000 rpm Counter spindle speed: 45 - 6,000 rpm Tool holder: BMT Tool turret: V12 (powered) Equipment: Chip conveyor Touch probe Parts catcher Bar feeder IRCO MUK 7012 Bar length: 1250 mm Coolant system TM 24, 8 bar

Condition: ready for operation (used), Year of construction: 2014, operating hours: 10,712 h, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 630 mm, controller manufacturer: FANUC, controller model: 0i MD, table width: 510 mm, table length: 950 mm, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis POSmill B 800 was manufactured in 2014. It features an X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 630 mm. The machine includes a table size of 950 x 510 mm and a spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the POSmill B 800 vertical machining centre we have for sale. Contact us for further details. - Control System: Fanuc 0i MD (Hartrol-Fanuc AI100 display interface)- Storage Capacity: 2+2 GB- Tool Changer: 24-fold ISO 40- Internal Coolant Supply (CTS): 20 bar with cartridge filter- Apparent Power: 25 kVA- Fuse Protection: 35 A- Voltage / Frequency: 400 V / 50 Hz (3-phase)- Power On Hours: 21,699 H- Run Time Hours: 10,712 H- Total Parts Count: 47,887- Standard Equipment: Active air-air control cabinet cooler, Ethernet network connection, regulated spindle cooler, opening left/right side windows, polycarbonate protective enclosure, external spiral chip conveyor, coolant head pump (M-functions), chip flushing pump & device, water gun, air gun, coolant at spindle, operating status light, electromechanical oil coolant separator, mobile electronic handwheel Podpfoz Arl Ijx Amxjrb Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Manufacturer: HERMLE Model: C 800 V Machine Type: CNC Vertical Machining Center Year of Manufacture: 2002 Control System: Siemens SINUMERIK Configuration: 3-Axis Machining Center Location: France Condition: excellent, can be demonstrated while powered on Origin: technical university / training and research environment Technical Data: Travel Ranges: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle: Psdpfx Aszd Sr Rsmxjrb Tool Interface: HSK-A 63 Max. Spindle Speed: 16,000 rpm Max. Spindle Power: 15 kW Max. Torque: 130 Nm Internal Cooling / Coolant Through Spindle: 40 bar Axes / Feed Rates: Max. Axis Speed: 35 m/min Acceleration: 5 m/s² Tool Changer: Tool Magazine: 30 positions Tool System: HSK-A 63 Equipment: Siemens SINUMERIK CNC control system HERMLE control panel 3-axis configuration Vertical milling spindle HSK-A63 spindle 16,000 rpm spindle speed Internal cooling / High-pressure cooling through the spindle, 40 bar 30-position tool magazine Enclosed work area Fixed machine table with T-slots Machine light Coolant system / Pump unit available External high-pressure pump visible Renishaw system / Measuring probe system visible Electronic hand-held device / Handwheel Control cabinet integrated Extraction / Exhaust connection visible Machine vise visible in photos, scope of delivery to be agreed Manuals / technical documentation available Description: For sale is a HERMLE C 800 V CNC vertical machining center, manufactured in 2002, with a Siemens SINUMERIK control system. The machine comes from a technical university or training and research environment in France. It is therefore not a conventional production machine from heavy series production, but a machine from a technically well-maintained environment. The HERMLE C 800 V is a very stable and high-quality 3-axis milling machine with a large working area, HSK-A63 spindle, 16,000 rpm, 30-position tool magazine, and internal cooling / high-pressure cooling through the spindle at 40 bar. The following combination is particularly noteworthy: * HERMLE machine construction quality * Siemens SINUMERIK control system * HSK-A63 tool interface * 16,000 rpm spindle * Internal cooling / High-pressure cooling 40 bar * 30-position tool magazine * Renishaw measuring system visible * Origin from a technical university environment The machine is very well suited for toolmaking, mold making, prototype construction, training, research, single-part production, and precise general CNC milling operations. The machine is currently set up and can be inspected or demonstrated while powered on, by arrangement. Note on peripherals: According to the current photographic documentation, a coolant / pump unit and an external high-pressure pump are available. A large separate KNOLL chip conveyor, KNOLL paper band filter, or a large central KSS filter system is not available. The exact scope of delivery of peripherals, accessories, clamping devices, tool holders, measuring probes, and documentation will be finalized before the sale. Sold as a used machine, as is, without warranty. Technical specifications are subject to change without notice. Subject to prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning length: 3,000 mm, feed length X-axis: 420 mm, quill travel distance: 235 mm, total length: 4,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 4,300 kg, disc diameter: 450 mm, faceplate diameter: 450 mm, MACHINE IN STOCK – AVAILABLE FOR IMMEDIATE DISPATCH! AT THE CUSTOMER’S REQUEST, WE CAN ARRANGE TRANSPORT DIRECTLY TO THE REQUIRED DESTINATION THROUGHOUT EUROPE – TRANSPORT COST IS QUOTED INDIVIDUALLY. ## MTP CQ6280 UNIVERSAL LATHE 800 × 3000 | 7.5 kW | 105 mm SPINDLE BORE Metal Technics Polska Professional metalworking machinery. The MTP CQ6280 800 × 3000 is a heavy-duty professional universal lathe designed for precise machining of metal components in production facilities, tool rooms, workshops and industrial plants. The machine is suitable for turning shafts, tapers and other rotational components, as well as cutting internal and external threads. The 800 mm swing over bed, 3000 mm machining length and large 105 mm spindle bore allow efficient machining of large workpieces. The robust 400 mm wide bed provides high rigidity during operation. The machine weighs approximately 4300 kg and is equipped with a 3-axis Digital Readout (DRO) for accurate and convenient machining. TECHNICAL DATA • Maximum workpiece length: 3000 mm • Swing over bed: 800 mm • Swing over cross slide: 570 mm • Swing in gap: 1035 mm • Gap length: 330 mm • Bed width: 400 mm • X-axis travel: 420 mm • Z1-axis travel: 230 mm • Tool post swivel range: 70° • Spindle speed: 25–1600 rpm (16 ranges) • Spindle bore: 105 mm • Spindle mounting: D1-8 • Spindle taper: MT5 • X-axis feed: 0.022–0.74 mm/rev • Z-axis feed: 0.044–1.48 mm/rev • Tailstock quill diameter: 90 mm Psdpfx Ajyz Ubxjmxerb • Tailstock quill travel: 235 mm • Tailstock taper: MT5 • Tailstock cross adjustment: 11 mm • Metric threads: 0.45–120 mm • Module threads: 0.25–60 mm • Diametral threads: 0.88–160 DP • Whitworth threads: 7/16–80 • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions: 4740 × 1140 × 1910 mm • Weight: approx. 4300 kg COMPREHENSIVE STANDARD EQUIPMENT • 3-axis Digital Readout (DRO) • 3-jaw chuck Ø320 mm • 4-jaw chuck Ø400 mm • Faceplate Ø450 mm • Drive plate • Fixed steady rest up to Ø250 mm • Travelling steady rest • Cooling system • Chuck guard and fixed splash guard • Reduction sleeves • Dead centre • Tool set The MTP CQ6280 800 × 3000 is a robust industrial lathe combining a large working capacity, 105 mm spindle bore, powerful 7.5 kW drive and comprehensive standard equipment. We can arrange transport throughout Europe directly to the customer’s destination. Please provide your delivery postcode and city for an individual transport quotation.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 131 kg, warranty duration: 6 months, HOT WATER PRESSURE WASHER NILFISK 5M-180/800 The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and 25° power nozzle Fully electric water heating allows work in places where exhaust gas production is not allowed. Brass, durable head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 180 bar and 800 l / h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Supply voltage [V]: 400 ~3 phases Pressing capacity [l / h]: 740 Working pressure [bar]: 150 Max. heating temperature [°C]: 80 Heater power consumption [kW]: 24 Engine power consumption [kW]: 5 Cleaning agent tank [l]: 10 + 10 Hose length [m]: 10 Weight [kg]: 131 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW power nozzle 25° Predpfxev N Hqvs Amxeb Water filter and GEKa claw connectors - FREE KEY FEATURES: Open oil system - no operating time limit Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very legible and intuitive control panel Simple construction and good access to individual elements under the housing make the machine user-friendly and easy to service

Condition: used, empty load weight: 2,800 kg, maximum load weight: 5,200 kg, first registration: 09/2003, next inspection (TÜV): 06/2023, total width: 25,500 mm, suspension: steel, tire size: 285 / 70 R 19.5 / 8mm, front tire size: 285 / 70 R 19.5 / 8mm, operation weight: 8,000 kg,