Used Karges Typ 190 for sale (3,871)

Condition: excellent (used), Hydraulic separator from MAGRA Kjdpfxewkrrtj Aktedl - Type WST 350 - 4 x DN 200 flanges - Built in 2023, but only in operation for 6 months New price = €1,950.00 net

Condition: good (used), functionality: fully functional, tested machine : Ksdpfx Akjy St Ncstedl Power 75 tons Stroke rate 90 strokes throat depth 300 mm ram stroke 16 - 140 mm ram adjustment 80 mm with shield , . new UVV-tested .

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, side roll diameter: 190 mm, working width: 1,550 mm, sheet thickness steel (max.): 9 mm, number of digital displays: 2, Equipment: cone bending device, emergency stop, hardened rollers, swiveling upper roller, – Capacity 1550 x 9 mm – Electrically adjustable rear roller – Electrically adjustable lower roller (material clamping) – Digital display for rear roller movement – Digital display for lower roller movement (material clamping) – Hardened rollers – Conical rolling – Swing-out upper roller – Braking motor – Emergency stop – Documentation – 400V Kdedoy Rh H Tepfx Aktel

Condition: good (used), Year of construction: 1977, functionality: fully functional, Spindle Moulder Type F - Year of manufacture: 1977 - 3, 4, 5, 6, 8, 10,000 rpm - Right/left rotation - Spindle diameter 30 mm - Clamping length 140 mm - Wooden jaws, fence with fine adjustment, rotatable - Table size: 1200 x 800 mm - Weight: 700 kg - with Holz Her 3-roller power feeder - good condition - Machine has been checked - Margin scheme taxation Shipping available at additional cost! Kjdpfx Akox E Dctotodl Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Ksdpfx Ajytr Swoktedl Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: excellent (used), Tool holder steep taper 45 (SK45) to MK2 (for milling arbors, shank milling cutters, for milling machines). Kjdoymx Edepfx Aktodl Manufacturer: Bahmüller, Type W640/1 – Wilhelm Bahmüller Maschinenbau Präzisionswerkzeuge GmbH Very good condition Without drawbolt (thread M16), with integrated ejector screw for clamped tool. Milling tool holder – tool taper for clamping Price €55,-- net ex location plus packaging costs All technical data subject to errors and omissions. We sell exclusively to countries within the European Community.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2023, loading space length: 9,395 mm, total width: 2,480 mm, Year of construction: 2023, Equipment: ABS, KRONE 2-axle swap chassis, Type: MAXI AZW 18 eL3B7, year of manufacture 02 / 2023 > Offer non-binding and subject to prior sale > Gross weight 18,000 kg > Technically ready for operation with normal signs of use, as shown in the pictures > Body / chassis: Color RAL: 9005 / black > Suitable for BDF superstructures - 7.45 with a support height from 1,020 to 1,320 mm > Unladen ride height: 1,080 mm > Tyres: 4 pcs, 445/45 R19.5, in good condition > Axles: Brand BPW > Brake system: EBS 4S/3M > Drawbar: length adjustable (12 x 50 mm) from 1,800 to 2,400 mm with towing eye / 40 mm > MOT & safety inspection current / new Kjdpfxsy N N Dwo Aktjdl > Air connections: red / yellow > Electrical connections: ABS and 1 x 15-pin > Additional galvanized rear underrun protection > Immediately available and available in multiple units > Price ex location D-59269 Beckum

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2023, loading space length: 9,395 mm, total width: 2,480 mm, Year of construction: 2023, Equipment: ABS, KRONE 2-axle swap chassis, Type: MAXI AZW 18 eL3B7, year of manufacture 02 / 2023 > Offer subject to change and prior sale reserved > Gross weight 18,000 kg > Technically ready for operation with normal signs of use, as shown in the images > Frame/body: Colour RAL 9005 / black > Suitable for BDF bodies 7.45 with support height from 1,020 to 1,320 mm > Ride height unladen: 1,080 mm > Tyres: 4 x 445/45 R19.5, in good condition > Axles: Brand BPW > Braking system: EBS 4S/3M > Towing drawbar: length adjustable (12 x 50 mm) from 1,800 to 2,400 mm with 40 mm towing eye > Main inspection + safety inspection current / NEW Kodpfxjy N Nxus Aktodl > Air connections: DUOMATIC > Electrical connections: ABS and 1 x 15-pin > Additional galvanized rear impact protection > Immediately available, multiple units in stock > Price ex location D-59269 Beckum

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2022, loading space length: 9,395 mm, total width: 2,480 mm, Year of construction: 2022, Equipment: ABS, KRONE 2-axle swap chassis, Type: AZW 18 eL3B9, year of manufacture: 10 / 2022 > Offer non-binding and subject to prior sale > Gross weight: 18,000 kg > Technically ready for operation, with normal signs of use as shown in the pictures > Body/Chassis: Color RAL 9005 / Black > Suitable for BDF 7.45 bodies with support height from 1,020 to 1,320 mm > Ride height unladen: 1,080 mm > Tyres: 4 x 445/45 R19.5, good condition > Axles: Manufacturer BPW Kdjdpsy N N Dqsfx Aktol > Braking system: EBS 4S/3M > Towing bar: length adjustable (12 x 50 mm) from 1,800 to 2,400 mm with 40mm towing eye > TÜV + safety inspection current / - NEW > Air connections: RED / YELLOW > Electrical connections: ABS and 1 x 15-pin > Additional galvanized underrun protection at rear > Immediately available, several units in stock > Price ex location D-59269 Beckum

Condition: new, ELWA ETR 96 Type R 2000 - EL21-1 SN: 2474-021, unused in original packaging, 100% functional, scope of delivery as per photos. Ksdpfx Aoy Rckyjktodl

Condition: new, Burster Digimaster 9181 Type: 9181-V3014 SN: 275508, unused, 100% functional, scope of delivery as per photos. Kedpfx Aey Rckgektodl

Condition: used, Year of construction: 2011, Charger Kdsdpfx Aoy Rbtajktel

Condition: good (used), FERZER P3 Pallet Racking System – Heavy-Duty Racking – Year of Manufacture 2020 – Industrial Quality For sale is a high-quality pallet racking system from FERZER Regalbau, type P3, built in 2020. The racking system is in used condition and is ideally suited for warehouses, shipping depots, industrial facilities, workshops, or logistics operations. This racking system impresses with its robust heavy-duty design and professional industrial quality. The 270 cm long beams allow for optimal storage of Euro pallets and a variety of goods. Technical specifications: * Manufacturer: FERZER Regalbau * Type: P3 * Year of manufacture: 2020 * 25 uprights * Height: approx. 230 cm * approx. 136 beams, each 270 cm * plus 8 beams, each 180 cm * high load capacity * contents not included Ideal for: * Pallet storage * Order picking * Shipping & logistics * Workshops and industrial areas * Warehouse expansion The system can be inspected by appointment. Loading assistance can be provided. Search terms: pallet racking, heavy-duty racking, industrial shelving, warehouse racking, high-bay racking, racking system, warehouse technology, FERZER Regalbau, P3 racking system. Kdedpfx Akjy R D I Tstsl

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: 200 bar Kedpfx Akob A I Sxetedl - Flow rate: 6 l/min per pump -Drive: 0.55 kW 1360 rpm -Hydraulic tank -Number: 4 units available Price: per piece -Weight: 95 kg

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 140 mm taper MK 3 MK table-size 380 x 360 mm feeds über Handrad turning speeds 85 - 1100 U/min total power requirement 1,3 KW weight of the machine ca. 0,27 t Ksdey N D Hyopfx Aktjdl dimensions 0,95 x 0,6 x 1,92 m Pillar drill with: - Feed via handwheel - Spindle speeds via belt drive

Year of construction: 1994, condition: used, machine/vehicle number: 41094/30, Technical data: - Manufacturer: Cefla with cross axle - Type: TN/L - Length: 1740 mm - Belt width: 1.400 mm Ksdpfx Aeya H Hioktodl - Total width: 1.600 mm - Height: 950 mm - Year of manufacture: 1994 - Feed rate approx. 2 - 8 m/min. - FU control for feed rate 50 Hz - Frequency converter required on site - Location: in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW - Voltage fluctuations max. +/- 5% - Location: in stock

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Tilting Spindle Moulder MAKA SF 4510 / GRIGGIO with Power Feed Very good condition, the machine comes from a small village carpentry shop with 3 people. Everything works perfectly. All bearings and guides are in excellent condition; the machine runs very smoothly. Equipped with a moulder fence, with one fence jaw adjustable in depth and featuring fine adjustment with scale, enabling jointing work, e.g., for a glue joint profile. The entire fence can also be adjusted via a set screw, allowing for very precise settings. With spindle locking via clamping lever. Chip extraction is very effective, with two 120mm diameter extraction ports on the fence and machine. Comes with a 30mm spindle, continuously tiltable from -5° to 45°, adjusted via handwheel, with a precise degree scale. Selectable clockwise/counterclockwise rotation. We deliver the machine in person anywhere in Germany for 220.00 EUR and carry out a demonstration, so you have no risk with your purchase. Delivery to other EU countries is also possible. Large table opening, adjustable with rings (this allows the use of cutters with a very large diameter and safe cutting with small cutters). Spindle speeds: 3200, 4200, 6000, and 8000 rpm. Spindle height adjustment via handwheel with locking screw. Spindle is exchangeable (a 40mm spindle can also be used). Optimal power transmission via V-belt drive. Machine table is 1070mm wide and 940mm deep. The machine is ready for immediate use. Kodpfx Akey Rh Nzetodl 380V, 5500W, with motor protection switch against overload. Year of manufacture: 1999. Weight: approx. 700kg. The machine has a CE certificate. Comes with manual, motor brake, and emergency stop switch, fully compliant with all requirements of the woodworking trade association (Holz-BG). Included is also a 3-roller power feed from HAFFNER with 8 speeds. Optimal, simple, fast, and safe operation.

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Control: Siemens 840 D Powerline Tool holder: HSK-A63 Max. rpm: 16,000 X-travel: 3,000 mm Y-travel: 2,500 mm Z-travel: 1,150 mm A-axis: +/- 100 mm C-axis: +/- 181.5 mm Ksdpfx Asy Rmw Roktjdl Table size: 3,000 mm x 2,500 mm Option: External blowing air Kinematics: Fork head

Condition: used, functionality: fully functional, Workpiece diameter: 1 – 18 mm Cutting discs up to: 100 x 1 mm Kedpfey Rugasx Aktjdl Bore: 20 mm

Condition: excellent (used), CATALOG NUMBER 7854 Technical data: - belt length: 2515x152 mm Kdjdpfey Rr T Rox Aktjl - belt width: 150 mm - oscillation - vertical oscillation movement - sanding length: 790 mm - table size: 840x300 mm - worktable for contoured elements: 300x250 mm - worktable adjustment: 80 mm - motor: 2.2 kW - sanding unit adjustable angle: 90-45 degrees - sanding head adjustment: 0-45 degrees - extraction port diameter: 100 mm - dimensions (length/width/height): 1450/600/1230 mm - weight: 138 kg ADVANTAGES – with oscillation – with shoe – suitable for contour and straight sanding – unit can operate vertically and horizontally – unpainted – used sander, very good condition Net price: 3,900 PLN Net price: 930 EUR (depending on the 4.2 EUR rate) (Prices may change with higher fluctuations)

Condition: ready for operation (used), M.G.M electric motors Type: BM 71 C4 Motor SN:15090268, used, normal signs of wear, 100% functional, scope of delivery as per photos Kdedpfoi D I Hysx Aktjl

Year of construction: 2014, condition: ready for operation (used), A hydraulic system, consisting of three identical power units and three identical hydraulic hammers including lines, is available. 1) 3x hydraulic power unit Atlas Copco LP 9-20 P, engine manufacturer: Honda, engine power: 6.7kW, fuel: gasoline, max. operating pressure: 150bar, return filter fineness: 25µm, machine dimensions X/Y/Z: approx. 650mm/550mm/650mm, weight: approx. 80kg. 2) 3x hydraulic, vibration-damped breakers Atlas Copco LH 190 E, year of manufacture: 2014, operating pressure range: 95bar-110bar, blow frequency: 1400/min, vibration value: approx. 5m/s², max. back pressure: 10bar, length: approx. 650mm, operating weight: 25kg. 3) Hydraulic hose lines. An on-site inspection is possible. Kdodpfey N Uwvex Aktjl

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Manufacturer: Speidel Tank and Vessel Construction Year of manufacture: 2020 Kdsdpfxoy I Skwj Aktjl Technical specifications: Net capacity: approx. 1,250 liters Material: Stainless steel 1.4404 / AISI 316L Design: insulated (with thermal jacket/insulation jacket) Internal surface: suitable for food/pharmaceutical use Operating pressure: atmospheric (storage tank) Temperature range: suitable for temperature-controlled media Connections: hygienic clamp fittings Manway: available Bottom: conical (complete drainage) Legs: height adjustable Application: The tank is ideally suited for the storage of pharmaceutical, cosmetic, or food-grade liquids. The tank was used as a CIP vessel in a pharmaceutical facility and was operated under hygienic conditions accordingly. Typical applications include: - Intermediate storage of bulk goods - CIP feed tank - Storage of alcohol, cleaning, or disinfectant solutions - Process integration in filling lines Construction: - Premium stainless steel construction (316L) - Insulated tank for temperature-controlled processes - Hygienic design with clamp fittings - Conical bottom for complete residue drainage - Industrial-grade build from German manufacturer Speidel Condition: - Very good condition - Used, well maintained - Immediately available FAT / Documentation: - Operation manual available - Manufacturer documentation included Scope of delivery / Documentation: - Complete stainless steel tank - Insulation jacket - Documentation / operation manual - Nameplate present Special features: - German brand quality (Speidel) - Suitable for pharmaceutical, cosmetic, and food applications - Ideal as a CIP feed or buffer tank - Compact design with high quality

Condition: good (used), Year of construction: 2022, Heating oil tank, 27,000 liters for heating oil/diesel – used - : Price: only €9,950 (net), ex location, emptied, cleaned and including loading! Kdsdpfsy I Ry Dsx Aktol Manufacturer: Kampitz Manufacturer number: 42089 Year of manufacture: 2022 Type: Z 38 12-312 Volume at permissible fill level: 27.82 m³ Permissible filling degree: 95% Material (inside and outside): S 235JR Hazard class: FP > 55°C Permissible density: 1.0 kg/ltr. Test pressure storage area: 2.60 mWs Test pressure leak monitoring area: -0.60 bar Max. medium temperature: 50°C Medium: heating oil / diesel Condition: good Available: immediately Location: Bünde, NRW

Condition: used, Charger Kodoyvcm Rjpfx Aktedl