Used Kk-Industries Cy3R-Hhs 360-40/13 for sale (55,810)

Condition: used, Year of construction: 2022, operating hours: 9,118 h, functionality: fully functional, machine/vehicle number: Robot: 4600-110103 / Controller: 4600-110103, overall weight: 585 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. Condition is used and tested. Typical applications include handling, assembly, machining, and general automation. Payload is 40 kg with a reach of 2550 mm, manufactured in 2020, with 9118 operating hours, and RobotWare RW 6.10.02.00 software. Equipped with an ABB FlexPendant programming pendant, a connection cable set, and a Foundry Plus protection version with a “Foundry Plus” label. Dkodpfxjzamcwj Akmeu

Condition: good (used), machine/vehicle number: 0155, Year of construction: 2009, Dana 340TE17313-40 from Uniktruck Dkodpfx Ajyuhfijkmsu

Condition: new, pressure: 40bending length: 1600column width: 1980motor: 4slide stroke - max.: 150opening width: 370CNC Press break KK Industries 40x1600 4 Axis Y1-Y2-X-R mit CNC Bombing Technical Parameters:Nominal Pressing Force: 63 kN Bending Length: 1600 mm Distance Between Columns: 1980 mm Throat Depth: 250 mm Slider Stroke: 150 mm Maximum Opening: 370 mm Slider Down Speed: 180 mm/s Slider Return Speed: 150 mm/s Slider Working Speed: 15 mm/s Main Motor Power: 4 kW CNC System: ZY68 Number of Control Axes: 4+1 Oil Tank Capacity: 90 L Back Gauge:X-Axis:X-Axis Travel: 600 mm X-Axis Speed: 200 mm/s Positioning Accuracy: ±0.10 mm Dsdpfewacq Esx Akmjku Repeat Positioning Accuracy: ±0.015 mm Motor Power: 0.85 kW R-Axis:R-Axis Travel: 150 mm R-Axis Speed: 100 mm/s Positioning Accuracy: ±0.10 mm Repeat Positioning Accuracy: ±0.015 mm Dimensions and Weight:Length: 1850 mm Width: 1250 mm Height: 2180 mm Weight: 2700 kg Motor Power (additional): 0.85 kW Delem T53 Control System (additional cost 5,000¤)

Condition: used, Year of construction: 2019, operating hours: 9,580 h, functionality: fully functional, machine/vehicle number: Robot: 4600-109272 / Controller: 4600-109272, overall weight: 570 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. Condition: used and tested. Typical applications include handling, assembly, machining, and general automation. Payload: 40 kg with a reach of 2550 mm, manufactured in 2019, with 9580 operating hours. Equipped with ABB FlexPendant programming device, connection cable set, and Foundry Plus protection version with “Foundry Plus” marking. Dsdpfxjzambme Akmoku

Condition: used, Year of construction: 2017, operating hours: 18,243 h, functionality: fully functional, machine/vehicle number: Robot: 4600-105209 / Controller: 4600-105209, overall weight: 562 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. Condition: used and tested. Typical applications include handling, assembly, machining, and general automation. Payload: 40 kg with a reach of 2550 mm, manufactured in 2017, with 18,243 operating hours and RobotWare RW 6.05.00.00 software. Equipped with an ABB FlexPendant teach pendant and a connection cable set. Dedpfx Akezamc Domeku

Condition: new, pressure: 65bending length: 2550column width: 2550daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3680x1960x2500weight approx.: 5500motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Dodpfx Aod Etfxskmsku

Condition: new, pressure: 200bending length: 4080column width: 4080daylight: 590stroke lenght (max.): 300messurements (LxWxH): 5740x2130x2680weight approx.: 13000motor power: 22CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Dsdpfx Aod Etf Ajkmjku

Condition: new, pressure: 175bending length: 3570column width: 3570daylight: 590stroke lenght (max.): 300messurements (LxWxH): 5340x2100x2680weight approx.: 11500motor power: 22CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Dodpfx Aod Etf Dokmjku

Condition: new, pressure: 150bending length: 3050column width: 3050daylight: 590stroke lenght (max.): 300messurements (LxWxH): 4740x2000x2680weight approx.: 9500motor power: 22CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Dsdpfx Ajd Etf Eokmsku

Condition: used, Year of construction: 2021, machine/vehicle number: 13900, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: - Year of construction: 2021 - Serial number: 13900 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Dksdpfx Aez Aa Eijkmeu Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2022, machine/vehicle number: 13180, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: - Year of construction: 2022 - Serial number: 13180 Dkedpfx Asz Aa E Nskmeu - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Year of construction: 2021, condition: used, Tube manufacturing line Manufacturer: Bazhou Wanxin Industrial and Trading Tube manufacturing line consisting of: Double-station unwinding device Function: Unwinds the coil passively Design: 2-station design with 180-degree rotation, manual expansion Advantages: Fast loading, simple and convenient operation Hydraulic shear and butt welding machine Function: Cuts off the front and rear ends, centers the strip, and welds the strip back together Design: Manual hydraulic shear with cantilever, front and rear pressure rollers, front and rear centering rollers, welding device Cutting method: hydraulic shear Press material method: double-cylinder press Welding method: manual welding Strip storage device Function: To ensure continuous production of the welded tube, a storage unit must be installed after the shear and butt welding platform so that the storage unit can continuously feed the strips while the strip steel material is prepared for stacking, unwinding, butt cutting, and welding. Design: Frame type, with moving and fixed frames (including feeding device) Feeding speed: max. 120 m/min Storage speed: max. 200 m/min Length of stored strips: 200 - 400 m Pinch roller motor: AC 11 kW Forming and sizing machine Working height: +850 mm Power: AC/DC motor: 160 kW, 1000 - 2000 rpm Reducer: Gear hardening Arrangement: Passive five-roll straightening machine, vertical rolls for feeding material, forming through 7 horizontal roll stands and 8 vertical roll stands, guiding, pressing, deburring, cooling, and sizing through 6 horizontal roll stands and 5 vertical roll stands, 1 round sizing stand Round sizing stand: 1 set of smoothing device, two sides with 8 rolls each, 4 rolls per side. 30 mm, 40cr, quenching, tempering, and hardening Horizontal roll shaft: 60 mm, bearing at position 55, made of material 40Cr Heat treatment of horizontal roll: surface hardening, HRC 50-55 Bearing guide: forged steel 45# Vertical roll shaft: 40 mm, material 40Cr, quenched, tempered, and hardened Vertical and horizontal rolls - Design: Portal design, opening width: 120 mm, clamping of horizontal roll stand: adjustment via worm gear Material of horizontal and vertical roll stands: welded (aging annealing) Gearbox: Gear: Spiral bevel gear Shaft of pinch roll: 50 mm, 2 rolls for pinching, adjusted via a manual screw rod Guide shaft: 40 mm Deburring knife: 2 pcs., one for working and one as a spare Cooling tank Cold cut-off saw Dodpfxozuz H Se Akmsku Function: The cold cut-off saw is one of the most important machines in the ERW tube line. It can cut the tubes to the preset length during high-speed production. Type: KK-5-50 Tube diameter: Round tubes 16-63.5 mm and corresponding square and rectangular tubes Length cut: any length between 1 - 6 m Material thickness: 0.6-2.5 mm Drive motor: 11 kW servo Yaskawa Feeding motor: 2.9 kW serco Yaskawa Saw motor: 11 kW, AC motor with frequency converter Feeding method: Servo multi-stage speed feed Speed adjustment: max. 110 m/min Clamping force: pneumatic Drag chain Saw blade: 400 mm Saw gearbox model: KK-80 Saw stroke (device length): 3 m Device dimensions: 4500 x 1500 x 1300 mm Conveyor track, table, and packaging machine Function: The formed tubes are automatically removed from the roll.

Condition: new, pressure: 63bending length: 2500column width: 1980motor: 11slide stroke - max.: 150opening width: 400CNC Press break KK Industries 63x2500 4 Axis Y1-Y2-Y-X-R mit CNC Bombing Technical Parameters:Pressing Force: 63 t Dkedov Trgqepfx Akmeu Bending Length: 2500 mm Distance Between Columns: 1980 mm Throat Depth: 300 mm Slider Stroke: 150 mm Maximum Opening: 400 mm Slider Down Speed: 180 mm/s Slider Return Speed: 170 mm/s Slider Working Speed: 14 mm/s Main Motor Power: 11 kW CNC System: ZY68 Number of Control Axes: 4+1 Oil Tank Capacity: 150 L Back Gauge:X-Axis:X-Axis Travel: 600 mm X-Axis Speed: 200 mm/s Positioning Accuracy: ±0.10 mm Repeat Positioning Accuracy: ±0.015 mm Motor Power: 0.85 kW R-Axis:R-Axis Travel: 150 mm R-Axis Speed: 100 mm/s Positioning Accuracy: ±0.10 mm Repeat Positioning Accuracy: ±0.015 mm Dimensions and Weight:Length: 2750 mm Width: 1350 mm Height: 2320 mm Weight: 4000 kg Delem T53 Control System (additional cost 5,000¤)

Condition: new, pressure: 50bending length: 2040column width: 2040daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3170x1960x2500weight approx.: 4850motor power: 11CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Dodpod Etfyofx Akmsku

Condition: excellent (used), Professional industrial vacuum cleaner KÄRCHER IVR-L 40/12-1 designed for use in production facilities, workshops, and metalworking applications. This unit is ideal for collecting liquids (such as coolant and oil) as well as metal chips. Its robust construction, large tank, and mobile base make this machine highly practical for daily industrial operations. ⸻ ⚙️ Applications: • CNC machines • Metalworking (chips + emulsions) Dsdpfx Aoyxwhiokmjku • Workshops and manufacturing • Industrial liquid collection ⸻ 🔧 Technical specifications (typical for this model): • Model: IVR-L 40/12-1 • Series: Kärcher Professional • Power supply: 230V • Tank capacity: approx. 40L • Intended use: liquids + chips • Mobile design on wheels ⸻ 🛠️ Condition: • Used machine • Fully operational, tested • Very good visual condition • Normal signs of use (visible in photos) ⸻ 📦 Included: • Kärcher IVR-L 40/12-1 vacuum cleaner • Suction hose • Power cable ⸻ ⭐ Advantages: ✔ Industrial-grade Kärcher Professional quality ✔ For liquids and solid contaminants ✔ Perfect for workshops and production ✔ Mobile, stable on wheels ✔ High durability and reliability ⸻ 🚚 Shipping: Shipping by courier or on a pallet possible. Personal collection available.

Condition: new, pressure: 80bending length: 2550column width: 2550daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3680x1960x2500weight approx.: 6100motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Dkodjd Etfwspfx Akmsu

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 5100messurements (LxWxH): 3800 x 1750 x 1700 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel Dedpfsvap Tuox Akmoku  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Djdpfjwzzzfox Akmjku Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg

Condition: new, sheet length: 3.200sheet thickness: 10cutting area width: 3200total power requirements: 15weight approx.: 7700messurements (LxWxH): 3800 x 1820 x 1920 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Djdpfevap Thex Akmjku Auto-cutting (Flying cut)

Condition: new, sheet length: 3.200sheet thickness: 16cutting area width: 3200total power requirements: 22weight approx.: 10600messurements (LxWxH): 3800 x 1950 x 2080 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting Dedpfx Akevap Tnemoku • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, pressure: 160bending length: 3200column width: 2655daylight: 400motor: 11slide stroke - max.: 200repeat accuracy: 0,015precision of position: 0,10CNC Press Brake 3200 mm x 160 t Standard Equipment:Sturdy construction for high stability and precision. CNC Axes: Y1, Y2, X, and R axes for precise control and accurate bending operations. Motorized CNC crowning device with CNC control for precise adjustments. CNC control system from the manufacturer (similar to Delem) for user-friendly operation and high flexibility. Back gauge with linear guide and ball screw, equipped with 4 back gauge fingers for precise material positioning. 2 sheet metal support arms for ergonomic handling of the material. Dedov S Npyspfx Akmeku Laser protection device on the upper beam to ensure safety during operation. Quick clamping for upper tooling for fast and easy tool change. Upper tooling system: Promecam Amada, split and offset for maximum flexibility. Multi V die system: Both Promecam and Amada systems are compatible. CE safety equipment to comply with all relevant safety regulations.

Condition: new, pressure: 125bending length: 3200column width: 2655motor: 11slide stroke - max.: 200Machine Model: Nominal Force: 125 kNBending Length: 3200 mmDistance Between Columns: 2655 mmThroat Depth: 400 mmSlider Stroke: 200 mmMax Opening: 455 mmSlider Down Speed: 180 mm/sSlider Return Speed: 160 mm/sSlider Working Speed: 13 mm/sMain Motor Power: 11 kWCNC System: ZY68Number of Control Axes: 4+1Oil Tank Capacity: 300 L Back Gauge XX-Axis Travel: 600 mmX-Axis Speed: 200 mm/sPositioning Accuracy: ±0.10 mmRepeat Positioning Accuracy: ±0.015 mmMotor Power: 0.85 kW Back Gauge RR-Axis Travel: 150 mmR-Axis Speed: 100 mm/sPositioning Accuracy: ±0.10 mmRepeat Positioning Accuracy: ±0.015 mm Dsdpfx Akowacqxomjku Dimensions:Length: 3450 mmWidth: 1580 mmHeight: 2550 mmWeight: 7100 kg Delem T53 Control System (Additional ¤5,000)

Condition: new, pressure: 200bending length: 3200column width: 2700daylight: 400stroke lenght (max.): 200column throat depth: 350messurements (LxWxH): 37000 x 1700 x 2700weight approx.: 14.000 Djdpfx Aetvhxiskmoku

Condition: new, sheet length: 1100sheet thickness: 6motor: 7,5width: 2250length: 1750heigth: 1400Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Dodpfsgh Ndmjx Akmeku Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: used, More technical data on request Dksdpjl Iir Isfx Akmou