Used Knapen Walking-Floor Standard for sale (22,082)

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load Blodpfoyh S Aiox Ad Aeg approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Version with continuous chassis, newly manufactured in self-supporting ALU construction with corresponding reinforcements in the lower chord for particularly high stability and strength, cross member 140mm high reinforced version (for high floor load) additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to support structure Axles and suspension: Disc brake 22.5, Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA readable in the SZM (display), 1st axle with starting aid (new EC regulation, without SZM equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims silver, 11, 75x22.5 ET 120 Kingpin: 2" - screwed into a 10 mm thick plate Fifth wheels: mechanical landing gear with two speeds, 2x 20 tons drawbar load with swivel foot Brake system: according to E.G. standard, EBS E system Wabco with RSS system (Roll-Stability-Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, ALU air reservoir system Electrical system: according to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the ALU rear end, 24 volt system with 1x15 pole and 2x7 pole socket, with side outline lights in LED design, 2 reflective panels on the rear, front pole lights 2x white, rear 2x red, 2 sep. halogen reversing lights integrated in the U-protection Body/body: Body fully welded on the inside, reinforced side walls Side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400 aluminum trough, side walls 30mm thick ALU plank profiles (2-3 mm) 600mm wide completely welded in with bottom and top chord, plank profiles fully welded inside, floor laid as a moving floor system on 140mm ALU cross beams, floor stacker load approx. 9 to/m2 Cross beams mounted correspondingly narrow (approx. 350mm), design, special aluminum corner profiles in bevelled design smooth rear wall in straight design with 2 ALU hinged doors 50/30mm thick with 2 espagnolettes Locks in welded-in ALU rear frame fixed in Teflon bearing and Inox bearing, Doors secured in open position with one chain on each side, hard wear plates on the side walls approx. 2000x1500x4mm fully welded, moving residual emptying wall with Kevlar tarpaulin approx. 1800mm long plus side brushes with Kevlar tarpaulin seal, service door in front wall with ladder turning inwards Hydraulic system: Moving floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders plus anti-lifting plain bearings, type CF 10mm floor version, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate possibility for connection of the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design still to be specified, operating pressure 190-max.240 bar, ALU end pieces welded into the sliding floor, electrical operation behind left with remote control integrated in a lockable watertight box, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash plates above the wheels, 1 ALU e-wheel holder, lateral ALU collision protection in folding design, 1 tool box approx. 860x460x400mm in plasti Bljdpfefi Nmwex Ad Aog

Condition: new, maximum load weight: 28,050 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand-new Knapen moving floor trailer K 100 A5060, 92 m³ * BPW axles * First axle configured as a lift axle * Air suspension * Disc brakes * ABS/EBS * OptiTire tire pressure monitoring system * 385/65 R22.5 tires Bljdeyhtn Nspfx Ad Asg * Gear support winches with push compensation * Plastic toolbox * 10 mm floor, 21 planks * Stainless steel wear plate under the floor * Radio remote control for floor, lift axle, and auxiliary headlights * Round bows * Manual rolling tarpaulin * 3-position tarpaulin supports * 1 pair of red LED lights on the rear bow * Side marker lights with indicator function * Reverse warning system * 6 additional reversing lights: at the landing gears, behind the last axle, and on the lighting bracket * Foldable and painted A-plate on the left rear door * Tarpaulin color similar to RAL 9006 * Body painted in RAL 7011 iron grey * Chassis galvanized, not painted !!! The stated sale price is fixed ex works at Knapen Trailers in NL-Deurne !!!

Condition: used, maximum load weight: 28,530 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2021, next inspection (TÜV): 02/2026, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,550 mm, loading space volume: 85 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen K200 Walking Floor 85m³ * 10 mm floor, 15 floor boards, suitable for bulk materials * SAF axles with air suspension and disc brakes * Roof roll tarp * Movable partition wall * Tyres 385/65R22.5 * Plastic storage box * BPW landing legs * Broom and shovel holder Bljdpfxsyhi E Rs Ad Ajg * Work platform * Work lights For further information, we are happy to assist you

Condition: used, maximum load weight: 28,150 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2019, loading space volume: 92 m³, Year of construction: 2019, Equipment: ABS, * Stas 3-axle walking floor S300ZX * 10mm floor Bljdpfsw H Hprox Ad Asg * Approx. 92m³ * Radio remote control * Roll-over tarpaulin * Air suspension * 2x lift axles * Disc brakes * JOST axles * EBS * ABS

Condition: used, maximum load weight: 33,910 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2026, next inspection (TÜV): 02/2027, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, 3-Axle STAS Walking Floor Semi-Trailer 91.5 cbm NEW VEHICLE Internal dimensions (LxWxH): 13,500 x 2,475 x 2,650/2,825 mm Axle spacing: 1,310 mm Unladen weight: 8,090 kg Fifth wheel height: 1,150 to 1,180 mm Chassis made of hot-dip galvanized steel SAF axles with large 430 mm disc brakes. Reinforced design “CD” WABCO trailer EBS with RSS anti-skid protection WABCO Smartboard with axle load display 1st axle lift axle 3rd axle steering axle Blodoyih R Sepfx Ad Ajg Air tanks made of aluminum Tyres: 6 x 385/65 R 22.5 JOST crank landing gear, full load version ASPÖCK full-LED lighting 4x LED work lights Toolbox rear left Side walls – profile joints inside fully welded CARGOFLOOR moving floor with 21 slats, material thickness 10 mm corrugated Operation with RADIO REMOTE CONTROL Rear closure plate made of stainless steel 3 crossbars, reinforced waste transport design Roof roll tarp reinforced version Panama 900 g 12 pairs of lashing rings in the floor Cleaning door in the front wall Rear crossbar pivotable, can be unlocked from underneath! Optimal for bale transport RENTING is the new BUYING – also available immediately with full-service rental!

Condition: new, maximum load weight: 31,175 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,575 mm, loading space volume: 92 m³, Year of construction: 2026, Equipment: ABS, Stock number: 5742 THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! Kraker approx. 92 m³ moving floor trailer with 10mm Cargofloor floor / remote control / wear plates / pneumatic underride guard / rental also possible! ---- * Manufacturer: Kraker * Model: K-Force - Moving Floor * First registration: - (NEW VEHICLE) * Color: Body RAL 9010 / Chassis MicroZinq / Tarp SIO 7999 Black * Technically permissible total weight: 39,000 kg * Unladen weight according to manufacturer: 7,825 kg * Payload: 31,175 kg * Volume: approx. 92 m³ (13.53 m long x 2.48 m wide x 2.369m/2.782m high) * Axles: 3x SAF with 1st axle as lift axle and starting aid / disc brakes * Tyres: 385/65R 22.5 on steel rims * Suspension: Air suspension with lift and lower * EBS Wabco * Chassis: Microzinc * Rear wear plates 1,250 x 2,500 x 3 mm * Double-wing rear doors with pneumatic locking * Operator platform at the front with access on the left * Saddle height: 1150mm * Cargo Floor CF 500 Compact floor with 21 floorboards * Floor 10mm thick, ribbed, with aluminium end caps * Operation via remote control and control box at the left rear * Rolling tarp with central locking * Sliding wall (moveable partition) made of aluminium with drag sheet * 2 plastic track cleaners on the sliding carriage * Extendable access steps at the rear right * 4 x pivoting steel roof bows, 50mm round * 2 x round LED tail lights per side * 2 x LED work lights at support leg height * 2 x LED reversing lights mounted laterally behind the axles Bledpfsyawkxox Ad Aog * Plastic toolbox at rear left * Holders for broom and shovel * 10-step ladder * Hydraulic hoses at the front approx. 3.5 m long * Single mudguards * Compressed air connection for cleaning gun * TPMS tire pressure monitoring system * Wabco Smartboard# AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! Note on possible errors in the listing: Despite careful preparation of this listing, there may occasionally be errors in the text or details. We assume no liability for errors, changes, or prior sale. All information is supplied without guarantee. Please contact us to verify details or clarify any questions.

Condition: new, maximum load weight: 28,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Equipment: ABS, Stock no. 5559 New vehicle in stock – available immediately! Purchase, rent, or rent with purchase option by arrangement! Side tarpaulin retrofit available at an additional cost! Stas 91 m² moving floor / 10 mm flat floor / TÜV load certificate ---- * Manufacturer: Stas * Model: BIOSTAR – moving floor * First registration: - (New vehicle) * Colour: Chassis galvanized, body RAL 7016 silver grey, tarpaulin SIO 7340 * Volume: approx. 91 m³ (13.50 m long x 2.475 m wide x 2.64 m to 2.82 m high) * Gross weight: 36,000 kg Bljdpov Emk Uefx Ad Aeg * Unladen weight (as per registration): 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1st axle lift / traction assist / disc brakes * Tyres: 385/65 R22.5 new on Speedline Diamond alloy wheels * Wheelbase: 7.85 m * Suspension: ECAS air suspension with raise and lower function * ABS / EBS * Cargo Floor CF 500 SL-C floor with remote control and control panel at rear left * 21 floor planks, 10 mm flat * 12 pairs of recessed lashing rings in floor * Welded aluminium end caps * Residual emptying wall with brushes and stainless steel handles * Service door in front wall * Swing doors (50/50) with pneumatic locking * 2x locking rods * Swingable rear door cross member * Hydraulic connections at the front with 3 m hoses and * Additional connection beneath body without hoses * Control platform with steps at front left * Fifth wheel height: 1,150 mm * Single wheel fenders * Full-load support legs * One-piece, foldable aluminium rear light guard * Roll tarpaulin (900g/m²) with tension belts * Foldable steel hoops and longitudinal tension belts * 1x toolbox at rear left * 1x aluminium ladder, 3.80 m long * Load pressure gauge * Smartboard * TPMS tire pressure monitoring * Aluminium rear impact guard * 1x extendable ladder at rear right * 2x LED work lights in front of the axles * 2x LED reversing lights at rear * 1x LED work light on interior front wall * 2 x 3-function lamps on upper rear door cross member New vehicle in stock – available immediately! Purchase, rent, or rent with purchase option by arrangement! Notice regarding possible inaccuracies in the listing: Although this listing has been carefully prepared, errors or inaccuracies in the information may occur. No liability is accepted for errors, changes, or prior sale. All information is non-binding. Please contact us to verify details or clarify any questions.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2005, next inspection (TÜV): 03/2026, loading space length: 13,372 mm, loading space width: 2,488 mm, loading space height: 2,700 mm, Equipment: ABS, * Walking floor * Disc brake * Lift axle * BPW axles * Sliding tarpaulin ----Internal vehicle number 11628-----Subject to errors and prior sale WhatsApp support available! Blodpfx Aeycbgiod Aeg If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2003, * Lift axle * BPW axles * Conveyor belt * Walking floor * Tarpaulin cover * Dosing roller * Unladen weight: 9,860 kg -----Internal vehicle number: 9815----Subject to errors & prior sale. WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. WhatsApp Bsdpfx Adjvyxzbj Aslg WhatsApp

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2019, * Lift axle * Alloy wheels * JOST axles * Sliding tarpaulin Blodjw Rit Topfx Ad Asg * Unladen weight: 7,760 kg ----- Internal vehicle number: 10296 ---- Subject to errors and prior sale WhatsApp support available! If you have any questions about the vehicle or would like further information, feel free to contact us conveniently via WhatsApp WhatsApp WhatsApp

Condition: used, maximum load weight: 33,880 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2014, next inspection (TÜV): 11/2024, loading space length: 13,425 mm, loading space width: 2,502 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Lift axle Bsdpfx Ajwy Hd Njd Aslg * Tarp cover * Storage box * Air suspension * Disc brakes * SAF axles * Unladen weight: 8,120 kg ----Internal vehicle number 11142-----Errors & prior sale reserved WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, Tennant 5680 Walk-Behind Floor Scrubber – Key Specifications Bsdpfx Adjx Szwbe Aelg a Tennant 5680 battery-powered walk-behind floor scrubber, ideal for commercial and industrial cleaning applications. This model is known for its durability, reliability and excellent cleaning performance — perfect for warehouses, manufacturing floors, supermarkets, healthcare facilities and contract cleaning operations. - Model: Tennant 5680 (battery-powered walk-behind scrubber) - Solution tank: 30 gallons / 114 L - Recovery tank: 40 gallons / 151 L - Brush motors: (2) 0.75 hp (0.5 kW) - Brush speeds: - • Disc: 200 rpm - • Cylindrical: 750 rpm - Vacuum motor: 0.8 hp, 3-stage - Battery system: 36 V (Standard ≈ 240 Ah) - Machine weight (with batteries): ~805 lb / 365 kg - Noise level: ~75 dBA - Estimated cleaning coverage: up to ~30,600 ft²/h (≈ 2,845 m²/h) depending on path & technology used Condition - Machine is in excellent working condition - Fully tested and ready for immediate use - Batteries and scrub heads in operational condition (specify if new/serviced if applicable) Contact us for pricing, additional pictures, video demonstration, or to schedule a viewing. Worldwide delivery available. keywords: Tennant 5680 floor scrubber, walk-behind scrubber, battery floor scrubber, industrial floor cleaning machine, used Tennant 5680 for sale

Condition: used, axle configuration: 3 axles, first registration: 11/2020, Equipment: ABS,

Condition: new, machine/vehicle number: 6650f95fd39bb5625662ee336, empty load weight: 7,550 kg, maximum load weight: 27,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Blodpfxji Riwxj Ad Asg Chassis saddle forwarding Fine-grained steel welded construction in lightweight design, up to the support legs, saddle plate with replaceable 2 king pins Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Extension ladder at the rear Door retainer on the side 2 wheel chocks with holder Aluminum side bumper Steel underride guard with wide Fliegl mud flaps Folding guard plate for light unit Quarter-shell mudguards Impact protection at the rear Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin pole with bracket 1 plastic tool box, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 1 spare wheel holder for 1 e-wheel, with wheel fastening set Axles+suspension SAF disc brake axles with 430 mm disk diameter Axle/suspension laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/55 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable SB Hydraulics Hydraulic cylinder with sliding device installed in the floor. 2-circuit hydraulics. Forward/reverse travel is switched electrically via remote control with cable. -Moving floor Power supply via parking light Hydraulic actuation via truck power take-off Hydraulic connection with hose to front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump capacity: Liter capacity: 110 ltr/min Pressure: 250 bar Oil tank filling min: 100 ltr SB floor Sliding floor with wear plate at the rear Aluminum floor boards, 8 mm floor profile, ribbed design SB Trough Aluminum box body made of high-quality, abrasion-resistant material. Front and side walls made of hollow aluminum profiles, welded together all round at the top with a wide special aluminum reinforcement profile, welded in at the bottom with a special frame. Sliding wall for better emptying of the load, with reinforced tarpaulin flaps at the bottom. With rail cleaner Rear wall made of hollow aluminum profiles, as a 2-leaf door, with 1/2 to 1/2 division, framed all round with a special U-profile with stop and rubber seal, with 2 external espagnolette locks, locked at the top and bottom. Rear wall with mechanical safety lock, operation at the rear on the left in the direction of travel. With swivel crossbar at the top. The door locks can be locked with a padlock. Standing platform with ladder access on both sides in the left/right direction of travel and railing for opening the door.

Condition: new, machine/vehicle number: 562ca26c733cc91276e95b716, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Chassis saddle forwarding Fine-grained steel welded construction in lightweight design, up to the support legs, saddle plate with replaceable 2 king pins Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Extension ladder at the rear Door retainer on the side 2 wheel chocks with holder Aluminum side bumper Steel underride guard with wide Fliegl mud flaps Folding guard plate for light unit Quarter-shell mudguards Impact protection at the rear Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin pole with bracket 1 plastic tool box, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 1 spare wheel holder for 1 e-wheel, with wheel fastening set Axles+suspension SAF disc brake axles with 430 mm disk diameter Axle/suspension laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/55 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable SB Hydraulics Hydraulic cylinder with sliding device installed in the floor. 2-circuit hydraulics. Forward/reverse travel is switched electrically via remote control with cable. -Moving floor Power supply via parking light Hydraulic actuation via truck power take-off Hydraulic connection with hose to front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump capacity: Liter capacity: 110 ltr/min Pressure: 250 bar Oil tank filling min: 100 ltr SB floor Sliding floor with wear plate at the rear Aluminum floor boards, 8 mm floor profile, ribbed design SB Trough Aluminum box body made of high-quality, abrasion-resistant material. Front and side walls made of hollow aluminum profiles, welded together all round at the top with a wide special aluminum reinforcement profile, welded in at the bottom with a special frame. Sliding wall for better emptying of the load, with reinforced tarpaulin flaps at the bottom. With rail cleaner Rear wall made of hollow aluminum profiles, as a 2-leaf door, with 1/2 to 1/2 division, framed all round with a special U-profile with stop and rubber seal, with 2 external espagnolette locks, locked at the top and bottom. Rear wall with mechanical safety lock, operation at the rear on the left in the direction of travel. With swivel crossbar at the top. The door locks can be locked with a padlock. Bljdpfx Adji Riywo Asg Standing platform with ladder access on both sides in the left/right direction of travel and railing for opening the door.

Condition: new, maximum load weight: 29,560 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Equipment: ABS, Stock no. 5640 Purchase, lease, or lease with a purchase option by arrangement! Approximately 60m³ STAS agricultural moving floor trailer with integrated grain hopper / service door, etc. ---- * Manufacturer: STAS * Model: FARMSTAR - Agricultural Moving Floor * First Registration: - (New vehicle) * Colour: Chassis RAL 9005, Superstructure RAL 7001, Tarp SIO 7500 * Volume: approx. 60m³ (10.60m long x 2.48m wide x 2.30m high) * Axles: 3x SAF axles / 1st axle with lift and traction assistance / disc brakes * Tyres: 385/65 R22.5 with Speedline Diamond aluminium rims * Wheelbase: 6.25m * Suspension: Air suspension with raise/lower functionality * Gross Weight: 36,000 kg * Unladen weight (manufacturer): 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with radio remote control and control panel rear left * 21-plank floor system, 6mm ribbed * Aluminium end caps, welded * Rear closure plate made of aluminium * Integrated grain hopper * Additional guides under the floor profiles * Residue emptying wall with brushes and stainless steel handles * Bulkhead made from aluminium plank profiles * Service door in the bulkhead * Smooth side walls inside and outside (grain specification), fully welded * Inspection window in the left rear side wall * Swing doors (50/50 split) * 4x locking rods * Swivelling crossbar at door closure * Hydraulic connections at the front with 3m hoses and * Connection option below the superstructure (without hoses) * Pressure 1" female * Return 1" female * Operator platform with access front left and right * Fifth wheel height 1,150mm * Individual mudguards * Full load supports * Rolling tarp (900g/m²) with quick-clamp system * Aluminium roof bows, foldable * Foldable rear aluminium light guard * Aluminium air tanks * 1x toolbox front left * 1x toolbox rear right Bledpexl Ntusfx Ad Aog * Shovel & broom holder left * 1x 2x8-step aluminium access ladder fixed right * 1x extendable ladder at the rear right * Smartboard * TPMS tyre pressure monitoring * LED rear lights – 5-chamber * 2x LED work lights in front of the axles * 2x LED reversing lights at the rear * 1x LED work light inside the bulkhead * 2 x 3-function lamps at the top of the door crossbar Purchase, lease, or lease with a purchase option by arrangement! Notice regarding possible errors in the advertisement: Despite careful preparation of this listing, occasional errors may occur in the text or information provided. We assume no liability for mistakes, changes, or prior sale. All information is subject to change and not guaranteed. Please contact us to verify details or if you have any questions.

Condition: used, maximum load weight: 28,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2018, next inspection (TÜV): 09/2025, Equipment: ABS, CARNEHL CSS/AL Moving Floor Trailer * JOST axles * 1 liftable axle * Air suspension * Pneumatic control * Disc brakes * Sliding tarpaulin * Double-wing doors with rotary bar lock at the rear * Access ladder and platform at the front wall * ABS connection * 15-pin electrical connector * ISO air connectors with red and yellow coupling heads * 21 boards * Folding tail light guards * Load pressure gauge Interim sale and errors excepted! Sale exclusively according to our terms and conditions. Bedpfsx Tyadex Ad Aslg Important Note: Despite careful verification of all details in our offer, errors may occur. In some cases, these are caused by transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information intended for initiating a contract. The details provided here are non-binding and do not constitute guaranteed properties.

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg King pin height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS KING PIN HEIGHT: Precise king pin height is 1,150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: Large disc Wheel offset: ET 120 Brake wear indicators (BVA) included Bsdpfx Aexplxzed Aolg The first axle is a self-lifting axle controlled via the EBS-E system. The third axle is a trailing steering axle. CONNECTIONS BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. Including traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (button in truck not included). AIR SUSPENSION: Lifting and lowering function. Aluminum air tanks. STEERABLE TRAILING AXLE LOCKING: Locking of the steerable trailing axle is managed as follows: - via reverse lights - by button in truck (button in truck not included) TYRES: 6 x 385/65 R 22.5 tyres for regional haulage (manufacturer's choice) on ALCOA MATT aluminum rims, ET 120. BRAKING SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR Dual-line compressed air braking system in accordance with CE guidelines. Spring-loaded parking brake operating on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK: 24 Volt electrical equipment. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED lighting mounted on the trailer side. Without junction box at rear - NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is installed in the fixed aluminum underrun protection. With foldable aluminum lighting cover. 2 x 1 five-chamber lamp - EUROPOINT III - LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection option below the body in front of support legs. ACCESSORIES EXTENDIBLE LADDER AT REAR: Extendible ladder integrated at rear of vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminum spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminum plank profiles. INTERNAL SEALING BETWEEN FLOOR AND FRONT WALL: Fixed sealing between floor and front wall using aluminum profile and PVC gasket. SIDE WALLS: Inner and outer surfaces smooth. Double-walled side wall profiles, 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain specification). Side wall profiles are fully welded on the inside. WEAR PLATE: Aluminum wear plate, rectangular, inside rear, 2000 (L) x 1500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electric control. 21-board floor system. Drive unit consists of 3 double-acting hydraulic cylinders with 200 mm stroke. Rear end plate in stainless steel. FLOOR SYSTEM OPERATION: Electric control with radio remote (genuine Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation using unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 aluminum floor boards - 8 mm ribbed, with welded aluminum end caps. REAR DOOR: 2 portal h

Condition: used, maximum load weight: 28,520 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2021, next inspection (TÜV): 10/2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen K200 Moving Floor 92 m³ * BPW axles with air suspension and disc brakes * 1st axle liftable * Tyres 385/65 R22.5 * Work lights * Sliding roof tarpaulin Bjdsx R Rdbepfx Ad Aolg * Movable partition wall * Spare wheel holder * Work platform with ladder access We are happy to provide further information on request.

Condition: used, machine/vehicle number: 140, empty load weight: 7,700 kg, maximum load weight: 27,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2008, loading space length: 13,530 mm, loading space width: 2,470 mm, loading space height: 2,750 mm, loading space volume: 91 m³, suspension: air, tire size: 385/65 R 22,5, Equipment: ABS, Color RAL 9006 white aluminum Disc brake EBS Wheelbase 1,310 mm SAF axles Alcoa aluminum rims Lifting and lowering device Roller tarpaulin Platform Lashing rings Bodpfep I Uz Sox Ad Aslg Errors excepted

Condition: used, functionality: fully functional, machine/vehicle number: 1941, empty load weight: 7,480 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2011, next inspection (TÜV): 10/2024, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,770 mm, loading space volume: 93 m³, suspension: air, tire size: 385/65/22.5, color: silver, Year of construction: 2011, Equipment: ABS, H & W moving floor , Cargo Floor floor , Lift axle , Roller tarpaulin , Platform , Folding rear light protection , Moving wall with service door , German trailer Blsdpfx Adsq T Iuyo Aeg Sale only to traders and under exclusion of any warranty . We deliver to any GERMAN seaport .

Condition: used, machine/vehicle number: 1, empty load weight: 8,000 kg, maximum load weight: 30,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 10/2005, next inspection (TÜV): 10/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 92 m³, suspension: air, tire size: 385.65 r 22.5, color: red, Year of construction: 2005, Equipment: ABS, tail-lift, stas 92m3 semi-trailer, 21-slatted moving floor ideal for waste with hydraulic adjustable sealed tailgate and closed roof for 2\3 , 3 disc axles with 3rd steerer, walkway in header, year 2005, overhauled until 31.10.2020-CONCESSIONARY INTERDRIVE SRL-PARMA Bsdpfx Adjh I Id No Aslg

Condition: used, empty load weight: 7,920 kg, maximum load weight: 27,080 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,515 mm, loading space width: 2,480 mm, loading space height: 2,725 mm, loading space volume: 93 m³, total length: 13,600 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 7,900 mm, color: black, gearing type: mechanical, Equipment: ABS, Lease rental with no down payment, 72-month term with final balloon payment. Technical Data Weights: - Fifth wheel load: approx. 11,000 kg - Permissible axle load: approx. 24,000 kg - Permissible total weight: approx. 35,000 kg - Unladen weight according to DIN 70020: approx. 7,920 kg - Payload according to DIN 70020: approx. 27,080 kg Dimensions: - Exterior dimensions (body): approx. 13,600 x 2,550 mm - Platform size: approx. 13,515 x 2,480 mm - Rear loading floor height (unladen): approx. 1,142 mm - Clear tarpaulin height at rear: approx. 2,725 mm - Clear tarpaulin height at front: approx. 2,675 mm - Overall front height (unladen): approx. 4,033 mm Bledpfx Ajx Nbgkod Ajg - Overall rear height (unladen): approx. 4,017 mm - Usable volume: approx. 93.1 m³ - Tractor fifth wheel height: approx. 1,150 mm Chassis: - Integrated chassis frame made of high-quality painted fine-grain steel - Axles: 3 x 9 t axles with disc brakes Z 430 mm, for rims with 120 mm inset; centrally positioned axles - Lifting axle: automatic lifting axle (3rd axle, rear), control via EBS with brake pedal function - 1st axle (front) with traction aid - Disc wheels: 6 x 11.75 x 22.5, on ALCOA alloy rims - Tyres: 6 x 385/55 R 22.5, Continental HTR2 - Suspension: air suspension unit incl. lift and lowering device - Braking system: electronic brake system (EBS) from Knorr, compliant with DIN 7638, RSS activated, with parking brake via spring actuators, brake connections at the front bulkhead - Kingpin: 2'' Jost, compliant with DIN and ISO 1726, exchangeable from below - Landing gear: 2 mechanical, 24 t telescopic landing legs with 2 speeds and equalizing pads Floor: - Aluminum frame resting on the longitudinal members, fitted with 28 welded, closely spaced aluminum I-crossmembers (100 x 100 mm). All I-beams are predrilled at regular intervals on a special drilling jig before welding. Our patented special plastic substructure for guiding the moving floor profiles is mounted with U-brackets. The moving floor profiles are then pulled in via cable system. With this substructure system, we achieve an absolutely straight ...

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: NM0KCXTP6KPM92774, mileage: 89,617 km, power: 367.75 kW (500.00 HP), first registration: 06/2024, fuel type: diesel, overall weight: 19,000 kg, tire size: 315/80, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, CO₂ emissions: 1 g/km, fuel consumption (urban): 20 l/100km, brakes: engine braking, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2024, operating hours: 2,270 h, operation weight: 7,900 kg, Equipment: ABS, additional headlights, air conditioning, airbag, compressor, cruise control, navigation system, onboard computer, Chassis NM0KCXTP6KPM92774 – this Ford F-max is fully operational and ready for departure – already registered in 03/2024 and benefits from 3+2 years factory warranty / 120,000 km per year. Comfort pack + NH4C + side skirts + 315/80 Pirelli + 385/65 front balloon tires + walking floor + ADR + aluminium rims. Bljdpfx Ajw R Sp Rod Ajg