Used Knuth Wf 5 Nc for sale (61,168)

Condition: used, mileage: 19,700 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, first registration: 11/2003, next inspection (TÜV): 01/2027, emission class: euro3, color: beige, number of seats: 5, Equipment: ABS, all wheel drive, central locking, immobilizer system, parking heater, 1st owner. Original mileage: only 19,700 km driven. With service history (maintenance booklet). Cgjdjyyfr Sjpfx Ad Nst Last service scheduled for 2025 at 17,983 km: engine, transmission, and rear axle oil replaced, as well as timing belt renewed. Tires were also replaced at the same time – fitted with Semperit winter tires (DOT 2023/2024). Manufactured 02/2003 and first registered 11/2003. One of the last T4 syncro models produced. Long wheelbase. Originally, vehicle was technically equipped ex-works for standard passenger car registration as a 9-seater. However, this registration was removed directly in the original registration document, as the vehicle was exclusively and continuously used as a special purpose (emergency) vehicle. So far, the actual registered type has always been “Other vehicle - water rescue emergency vehicle”. Currently, 5 seats are registered and present. All seats are robust, low-maintenance faux leather. Rear is fitted with SORTIMO shelving, previously used for rescue equipment and uniforms. Empty weight according to documents: 2270 kg. Gross vehicle weight: 2890 kg. Overall exterior dimensions of this VW T4: length 5,107 mm / width 1,840 mm / height with special signal equipment 2,100 mm (without blue lights: 1,920 mm). Right-side sliding door and rear barn doors. Dent on the left rear. All doors function perfectly and open/close without any unwanted noise. WEBASTO AirTop 3500D auxiliary heater. Tow bar with 2,000 kg towing capacity braked / 750 kg unbraked. Maximum permissible towing weight: 4,500 kg. 2.5-liter TDI five-cylinder diesel engine. 2461 cc. 102 hp. Engine code: AXL. 5-speed manual transmission. Differential lock. ABS. Power steering. Driver and passenger airbags. Remote central locking – 2 original VW remote keys included. Electric windows and electrically adjustable exterior mirrors. Maximum speed entered in documents: 155 km/h. The T4 was recently driven over 600 km on the motorway without issue. Vehicle runs excellently and is in good original condition. TÜV valid until 01/2027. This offer is only valid for businesses and freelancers of all kinds, as well as public authorities / emergency services. Sale to private end consumers is not permitted. Subject to prior sale and errors. The syncro is available with us immediately.

Condition: excellent (used), mileage: 764,324 km, power: 265 kW (360.30 HP), first registration: 09/2007, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, total length: 9,800 mm, total width: 2,600 mm, total height: 3,950 mm, loading space length: 7,550 mm, loading space width: 2,450 mm, loading space height: 2,550 mm, Year of construction: 2007, Equipment: AdBlue, tail-lift, French truck Manual gearbox Very clean truck = Further information = Front axle: Steered; Suspension: Leaf spring Rear axle: Twin tyres; Suspension: Air suspension Number of cylinders: 6 Unladen weight: 10,280 kg Payload: 8,720 kg Gross vehicle weight: 19,200 kg Technical condition: very good Visual condition: very good Cgodey H Sm Aepfx Ad Nst Contact Thierry Leemans for further information.

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Csdpfovdk A Esx Ad Nsgt Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, Year of construction: 2002, DOUBLE MITRE SAW (GLASS BEAD SAW) OMGA TRF 527 NC incl. star stop Year of manufacture: 2002 Min. & max. distance between units: 158 mm, 2800 mm Cutting capacity at 90 degrees: 55 mm Cutting capacity at 45 degrees: 40 mm Max. cutting height: 40 mm Motor power: 2 x 1.18 kW Cgodpfx Adexwumqo Njt Saw blade bore: 30 mm Saw blade diameter: 220 mm Spindle speed: 5000 rpm

Year of construction: 2009, operating hours: 3,093 h, condition: ready for operation (used), travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 320, overall weight: 8,900 kg, total width: 3,400 mm, total height: 3,160 mm, product length (max.): 5,800 mm, spindle speed (max.): 1,600 rpm, table load: 2,500 kg, number of axes: 5, This 5-axis MSC Chemnitz BFT90/5 MSC boring machine was manufactured in 2009. It features a substantial table size of 1000 x 1120 mm with a maximum table load of 2.5 t. The machine offers impressive feed rates of 4000 mm/min and a spindle speed range of 4 – 1600 rpm. If you are looking to get high-quality boring capabilities, consider the MSC Chemnitz BFT90/5 MSC machine we have for sale. Contact us for further details. • Table size: 1000 x 1120 mm • B axis (table rotation): 360° • Feed rate (X/Y/Z): 4000 mm/min • Spindle diameter: 90 mm • W axis travel: 710 mm • Control cabinet dimensions (L x W x H): 2.0 x 0.75 x 2.0 m • Temperature range: 15–40 °C • Electrical: 3-phase/50 Hz; 380 V rated voltage; 24 V control voltage • Connected load: 40 kW • Fuse rated current: 100 A • Typical power consumption: approx. 7.5 kW Cgedpfsy Hvgtox Ad Nst • Spindle running time: 3069 h • Power-on hours: 10402 h • General overhaul: 2009 Technical Specification Taper Size SK 40

Year of construction: 2026, condition: used, Description: Suitable for dressing and profiling diamond and CBN grinding wheels. ccesories: Total enclosure. Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel), Wheel motor strengthened to 4 kW, Dressing wheel motor strengthened to 2,2 kW, 2 Machine lights 12 V, Optical linear scale with digital display counter (0,001 mm) X, Z Axes, 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120X included), High performance swivelling angle reader (0,05°), Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm, Stepless oscillation speed, Cedslfil Sjpfx Ad Nsgt Automatic central lubrication, SIC Wheel dresser manual, Grinding wheel holder:: HSK 50 E Diamond grinding wheel diameter: 50 - 250 mm max. width of grinding wheel: 70 mm Grinding wheel bore diameter: 20 mm Speed of the diamond / CBN disc spindle: infinitely variable 100 - 1000 rpm., Radius of the grinding wheel: 0-30 mm Dimensions of the dressing wheel: 180 x 25 x 31.75mm, Speed of rotation of the dressing wheel: 200 - 2000 rpm., Oscillation stroke of the dressing wheel: 0-70 mm Connected load of the motor of the dressing wheel: 2,2 kW Weight approx: 1400 kg Dimensions L x W x H: 1850x2300x2100mm,

Condition: refurbished (used), Centreless grinding machine GHIRINGHELLI M2200 CNC 5 axes grinding wheel 200x610 CNC FANUC 5 AXIS Variable speed drive on grinding wheel complete overhaul with electric / electronic retrofit Machine in our warehouse in Gussago BS Mimu machine tools (Italy) Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece Cjdpfxewq Dn To Ad Nsgt to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly with axial feed through the rectification gap. Grinding wheel width: 200 Grinding wheel diameter: 610 CNC: 4 axes

Condition: new, 230 mm 230 x 230 mm Codpsfg E Hyofx Ad Nsgt saw band length 2950 x 27 x 0,9 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm Cgjdpfjfg E H Eex Ad Nst capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: good (used), Year of construction: 2019, machine/vehicle number: 562670-08-C, Offer 25488 Codpfsy E Hv Asx Ad Nsgt Technical Data: - Band saw blade dimensions: 3320 x 27.0 x 0.9 mm - Infinitely variable cutting speeds: 15 – 100 m/min - Hydraulic material vice - Mitre adjustable left up to 60°, right up to 45° - Cutting capacity at 90°: - Round: 280 mm - Square: 260 mm - Flat: 330 x 260 mm - Cutting capacity at 45° left & right: - Round: 250 mm - 45° left, flat: 270 x 200 mm - 60° left, flat: 170 x 170 mm - Drive: 400 V / 2.2 kW - Coolant system - Chip brush - Weight: approx. 1300 kg - Space requirement: approx. W 1800 x H 1900 x D 1950 mm

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 61900 € 1169.91 € Doppelsäulenführung 6000x41x1,3 mm 20-100 m/min 540 mm 540 mm 670x540 mm rund 540 mm, quadrat 540 rund 510 mm, quadrat 510 rund 270 mm, quadrat 250 805 mm 2.2 kW 4 kW 0.12 kW Cgodpsynm Rqofx Ad Nst 3100 mm 2350 mm 2150 mm 3800 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 540 CGS NC (with servo instead of hyraulic feed) € 70.200,--

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 104600 € 1976.94 € Doppelsäulenführung 10430x54x1,6 mm 20-100 m/min 750 mm 1300x700 mm rechteck 850 x 750 mm rechteck 570 x 750 mm rechteck 850 x 750 mm Cedpfx Aoynm Rdsd Nogt 930 mm 4 kW 11 kW 0.12 kW 5500 mm 2280 mm 3400 mm 8500 kg Hydraulic vice Digital display for angle indication Hydraulic saw arm clamping Manual saw arm rotation Continuously adjustable saw arm lowering speed Automatic saw frame lifting after cutting Sensitive cutting pressure regulation depending on material properties Hydromechanical blade tension readable via pressure gauge Mobile control panel Heavy-duty, helical-toothed conical gear Driven chip brush Blade guidance via carbide plates and rollers Automatic blade breakage protection Coolant system Hydraulic saw frame lifting Operating instructions in GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 82900 € 1566.81 € Doppelsäulenführung 8400x54x1,6 mm Csdpeynm N Tsfx Ad Nogt 20-100 m/min 650 mm 1000 x 600 mm rechteck 660 x 600 mm rechteck 440 x 600 mm rechteck 660 x 600 mm 880 mm 4 kW 7.5 kW 0.12 kW 4400 mm 2270 mm 2660 mm 6520 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 61300 € 1158.57 € Doppelsäulenführung 6000 x 41 x 1,3 mm 20 - 100 m/min 560 mm 560 mm 600 x 560 mm 810 mm 2.2 kW 5.5 kW 0.12 kW 3250 mm 2200 mm 2350 mm Cgjdoynmy Sjpfx Ad Njt 4500 kg Hydromechanical band tension Continuously variable bandspeed (inverter) Linear guide Feed vice with servo drive with 700 mm stroke or 9.999 mm for multi-stroke Control panel with touchscreen (50 cutting lengths / 30 programs) Planetary gearbox Saw pressure adjustment Band deflection sensor Coolant device Chip brush Optical height adjustment OPTIONEN: Hydraulicupper clamping Micro cooling unit Roller table3 m Laser cutting line

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 34400 € 657.04 € Doppelsäulenführung 4380x34x1,1 mm 20-100 m/min 325 mm 325 mm 400x325 mm rund 325 mm, quadrat 325 rund 300 mm, quadrat 265 rund 190 mm, quadrat 190 655 mm 1.1 kW 2.2 kW 0.12 kW 2130 mm 2150 mm 1650 mm 1860 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH Cgedpfxewirhre Ad Not OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 325 CGS NC (with servo instead of hyraulic feed) € 38.900,--

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 53900 € 1018.71 € Doppelsäulenführung 7000x41x1,3 mm 15 - 120 m/min 560 mm 540 mm 810 x 530 mm rund 520 mm, quadrat 520 rund 520 mm, quadrat 520 rund 330 mm, quadrat 330 875 mm 1.1 kW 4 kW 0.12 kW 3850 mm 1700 mm 2450 mm 3400 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME Csdpfx Aswiqx Nod Njgt user manual in GERMAN or ENGLISH (roller table see photo - optional available, additional price)

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Technical specifications: Main saw blade diameter (mm): 550 Panel cutting with pull-out fence and sliding table 3200 mm: 3200x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extraction port diameter: - on frame: 120 mm - on saw blade guard: 100 mm Main motor power [S6 -40%] Hz50 kW: 7 Scoring blade motor power [S6 -40%] Hz50 kW: 9 Cutting width at rip fence (mm): 1000 Standard equipment and accessories: - Optimizer/processing control app for tablets: SCM Thundercut The app can be downloaded from the App Store or Play Store on tablets compatible with iPadOS or Android. It can be activated using the QR code supplied with the machine. The app enables you to: * Manage the machinery fleet and materials or panel stock * Create and edit projects, import projects from main furniture design software (file format "cpout"), and import cutting lists * Optimize cutting lists by selecting one or more proposals from the app’s integrated optimization software * Properly set up the machine for each cut, thanks to the simple and intuitive graphics of the 3D sequencer that guide the operator through every step * Print barcode labels for marking different parts via Bluetooth with compatible label printers - 10-year warranty on the sliding carriage system - Maximum saw blade diameter: * Up to 450 mm with scoring saw blade mounted * Up to 550 mm without scoring saw blade - eye-S 15" electronic control system including: * 15" touchscreen monitor * Direct control of the following axes in manual, semi-automatic, automatic, and incremental modes: - Main saw blade height adjustment - Saw unit tilt adjustment - Rip fence adjustment - Scoring blade height and lateral adjustment (the scorer is automatically raised to the set position when switched on and lowered when switched off) * Operator assistance functions for complex cutting operations * Storage capability for up to 1000 programs with corresponding images * Storage for up to 1000 different tools with corresponding images * Cutting sequence management for preloaded parametric machining programs Cjdpfx Adsxavrge Negt * Environment for creating and storing new sequenced working programs * Automatic acquisition of working dimensions from the Thundercut App * USB port * Prepared for network connection - Auxiliary function of the electronic control system, including: * Determination of the correct stop position on the longitudinal fence for panel machining with tilted saw blade * Determination of the correct stop position on the longitudinal fence for angle cuts with the mitre fence on the work table with or without tilted saw blade - Swivelling control panel above table

Condition: used, mileage: 625,000 km, power: 294 kW (399.73 HP), first registration: 10/2006, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: grey, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, Volvo FM 400 6x4 Skip Loader Nencki Remote Euro 5 . For inquiries: 0426379 * Condition: Very good * Engine: 294 kW / 400 HP * Displacement: 12,780 cm³ * ABS * EBS * Differential lock on rear axle Cjdpfxoy Euhmj Ad Nsgt * AdBlue * Suspension: Leaf spring / Leaf spring * Air-suspended comfort driver's seat * Automatic climate control * Manual roof hatch * Electric windows (driver/passenger) * Electrically heated and adjustable mirrors * 24/12V socket * CD radio / AUX / USB * External sun visor * Beacon lights on roof * Fog lights * Maneuvering mirror, right side Body: Roll-off tipper * Manufacturer: Nencki Tyres: 1st axle: 315/80 R22.5, leaf-sprung / 25% 2nd axle: 315/80 R22.5, leaf-sprung / 20% 3rd axle: 315/80 R22.5, leaf-sprung / 25% ----Price €29,900 + 19% VAT For further questions, you can reach us at the following numbers: * We speak: German, English, French, Polish, and ????? Subject to errors, typographical mistakes, and prior sale.

Condition: good (used), Year of construction: 1998, Ref. -No.: 10548 Manufacturer: MONFORTS Type: RNC 5 A17 Year of construction: 1998 Type of control: CNC-Steuerung Control: Monforts Storage location: Halberstadt Country of origin: Germany Machine-No.: 303XXXX Chuck diameter: 250 mm Cgedexmd T Eepfx Ad Net Centre Distance: 1080 mm Spindle Diameter In Front Bearing: 100 mm Spindle head according to DIN 55027 (size): Gr. 8 Circumferential diameter over radial slide: 290 mm Max swing diameter: 500 mm travel of the cross slide: 265 mm Tailstock outside diameter of the quill: 80 mm Tailstock maximum quill stroke: 160 mm Tailstock inner cone: MK 5 Type Material flow max.: 70 mm Turning Speed Range: 2 - 2800 rpm Further information: The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Year of construction: 2008, This 3-axis Baublys Control Laser UL 65QR/NC 100 50 50 SOMA was manufactured in 2008. It features a Q-switched solid-state Nd:YAG laser, capable of reaching frequencies up to 50 kHz. The machine includes a round transfer table of approximately 75 cm and is housed in a 2.4 x 2.6 meters enclosure. If you are looking to get high-quality laser marking capabilities consider the Baublys Control Laser UL 65QR/NC 100 50 50 SOMA machine we have for tact us for more information. Cgsdpfsx Sz Efsx Ad Njt • Laser type: Q-switched solid-state laser • Laser medium: Nd:YAG • Wavelength: 1064 nm • Beam quality (M²): 13 (6 kHz, MM);

Year of construction: 1994, condition: good (used), In good technical condition Year of manufacture: 1994 Travel of the column on the bed (X-axis): 9,000 mm Travel of the spindle head (Y-axis): 5,000 mm Quill travel (Z-axis): 1,600 mm Cedpjy Hgvlsfx Ad Nogt Spindle stroke (W-axis): 1,250 mm Spindle + W and Z axes – 2,850 mm Boring spindle diameter: 225 mm Taper in spindle: ISO 60 Spindle cross-section: 520 x 520 mm Main motor power: 90 kW

Condition: excellent (used), mileage: 575,974 km, power: 132 kW (179.47 HP), first registration: 02/2014, fuel type: diesel, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Year of construction: 2014, = Additional options and accessories = - PTO = Remarks = WMAN13ZZ4EY312503 Cgjdpfx Asymrtnod Njt = More information = Technical condition: very good Visual appearance: very good Price: On request Registration number: 2DAA498 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, DOUBLE GLASS BEADING SAW TRF 527 NC FP CA MM.4000 (according to nameplate) Double mitre saw for simultaneous cutting of two superimposed glass beads. Right saw unit is fixed; Adjustment of the left unit is based on the set cutting length, which can be read from a digital display. Units are equipped with supports that enable simultaneous cutting of 2 glass beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process is completed, the pneumatic clamping cylinders automatically swivel to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital measurement display • Pressure monitor • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release and motor protection switch • Pressure monitor • Tool kit • Safety covers with horizontal, swiveling clamping devices • Two-hand control • Belt drive • Pneumatic unit lift • Central support TECHNICAL DATA • Motor output 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 4000 mm • Min. cutting length 158 mm • Weight approx. 290 kg • Space requirement (standard equipment) approx. 4,500 x 1,000 mm 1 set of 2 mechanical stops for setting up to 4 intermediate angles. Additional central support. 1 set of adjustments for rebated profiles Cedoy Er Ikjpfx Ad Negt 1 set of adjustments for rebated profiles according to drawing: - Adapter on the clamping devices to compensate for profile inclination - Shims on the rear stops of the units and the central piece. The sketch below (in green) shows a beveled presser following the inclined profile and pressing it against the (red) shim on the stop. Details provided without guarantee.

Condition: used, Year of construction: 1996, Technical details: turning diameter: 500 mm turning length: 1500 mm turning diameter over bed slide: 290 Cgsdpfx Ajwwlvled Not spindle bore: 71 mm turning speed range: 3 - 2800 U/min rapid speed: 10 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 22 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,0 x 1,6 x 2 m with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment *

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox iGen 5 Press’ colour production system Items for sale: 1 x Xerox iGen 5 Press with the following specifications: Includes FreeFlow Print Server Includes 2 x YVC-2 paper decks Includes YVC-3 finisher Includes 5th colour (orange) Not the right configuration? It is no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 15,719,744 pages Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). Cjdpjy Dfcljfx Ad Nsgt The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.