Used Kubota V3307Cr-T. Brand New And Complete. Tier 4 Epa A... for sale (117,154)

Condition: new, functionality: fully functional, NEW & UNUSED VACUUBRAND PC 3004 VARIO SELECT CHEMISTRY PUMP STATION Ljdpozv H Uksfx Amvoag For sale is an absolutely new, unused VACUUBRAND VARIO® chemistry pump station, type PC 3004 VARIO select (purchased from HUBERLAB Switzerland, new price / list price: CHF 10,590). The unit comes from a project design / incorrect allocation and has never been put into operation or brought into contact with any media. HIGHLIGHTS & BENEFITS: - Integrated graphic touch controller VACUU·SELECT with pre-defined and freely programmable vacuum processes - Highly efficient, speed-controlled VARIO diaphragm pump for precise vacuum control and extremely quiet operation - Highest chemical and solvent resistance due to fluorinated plastics in the media area - Integrated suction-side separator (AK) and pressure-side emission condenser (EK) for optimal solvent recovery TECHNICAL DATA: • Type: PC 3004 VARIO select • Power connection: 200–230 V~, 50–60 Hz (with CH power cable) • Vacuum controller: VACUU·SELECT (touchscreen) • Cylinders / Stages: 4 cylinders / 3 stages • Max. pumping capacity: 4.6 m³/h (2.7 cfm) • Ultimate vacuum (abs.): 1.5 mbar (1.1 Torr) • Ultimate vacuum with gas ballast (abs.): 3.0 mbar (2.2 Torr) • Max. back pressure (abs.): 1.1 bar • Motor rated power: 0.53 kW • Speed range: 30 – 2400 min⁻¹ • Protection class: IP 40 • Suction side connection: hose nozzle DN 6–10 mm • Pressure side connection: hose nozzle DN 8–10 mm • Dimensions (L x W x H): 419 x 243 x 457 mm • Weight: 21.1 kg CONDITION: 100% factory new, unused, with complete accessories. PAYMENT & LOGISTICS: • Invoicing: Sale is made against invoice (excluding VAT / tax-free intra-community delivery for companies in the EU with a valid VAT ID). • Currency & Payment: Billing in EUR. Bank transfer (SEPA) before collection or shipment. • Shipping / Transport: - Self-collection at the location (zip code 4226 Breitenbach / Basel region, Switzerland) is preferred. - Secure shipping via courier or freight forwarder (well-padded and packed on a pallet) within Switzerland and to the EU after consultation and upon assumption of costs.

Condition: good (used), Drilling system / auger drill / 5-T-A / 4 T-A including coolant ring Lajdozvmi Uopfx Amvog Drilling diameter, smaller drill: 48-65mm (overall length approx. 730mm) Drilling diameter, larger drill: 64-88mm (overall length approx. 755mm) Mount: MK5 or SK50

Condition: reconditioned (used), Refurbished edge banding machine BRANDT AMBITION 1440 Ledpsw S E Rqsfx Amveag

Condition: ready for operation (used), Year of construction: 2008, Brandt Optimat KDF 420 Edge Banding Machine Powercontrol PC 20 control system Edging thickness: 0.4–8 mm Edging height: 8–60 mm Joint trimming with DIA cutter End trimming Flush and radius trimming Radius scraper blade Flat scraper blade Buffing unit Machine length: 4360 mm Operating manual and tools included Laodpfx Ajx Dzw Njmvjg Year of manufacture: 2008 Price: 15,000.-

Condition: used, BRANDT Optimat KDF340 Edge Bander Pre-milling cutters Adhesive application by roller Pneumatic pre-cut guillotine Pressure rollers Lsdpjy Dc Ulsfx Amvjag End-cutting saws Top-bottom milling unit R1-R2 Profile scraper Polishing unit Max. workpiece height: 45 mm Max. edge thickness from roll: 3 mm Feed speed: 10 m/min Machine length: 350 cm Machine inspected, ready for operation

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, edge thickness (max.): 3 mm, feed rate X-axis: 11 m/min, plate height: 60 mm, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum feed speed: 11 m/min Maximum panel thickness: 60 mm Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum panel width: 70 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of working units: 5 Maximum rotation speed: 12,000 rpm MACHINE DETAILS Unit: Pre-trimming unit Unit: Finishing/Adjustment unit Automatic engagement by time: yes Motor power: 2.2 kW Edge pre-heating lamps Coil magazine Number of positions: 1 Laedjxw Tngjpfx Amveg Adhesive system Glue pot for hot-melt glue Prefuser for hot-melt glue Edge pressure roller track Number of pressure rollers: 3 with NC positioning Edge processing unit 1 Unit: End trimming unit Number of motors: 2 Maximum processing speed: 11 m/min Motor power: 0.18 kW Maximum rotation speed: 12,000 rpm Edge processing unit 2 Unit: Edge milling unit Number of motors: 2 with NC positioning Motor power: 0.55 kW Maximum rotation speed: 12,000 rpm Edge processing unit 3 Unit: Edge scraper Edge processing unit 4 Unit: Glue scraper Total installed power: 13 kW EQUIPMENT Control system: EASY CONTROL EC 10+ CE marking

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine BRANDT Optimat KDF 440 C, year 2015: Configuration: Entry fence servomotorical adjustable Premilling manual adjustable Edge banding EVA glue / Airtec System Schugoma Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers pneumatic adjustable Polishing brushes Cleaning fluid spraying front and back. Control panel Working thickness adjustment servo driven Material height 8-60mm Laodpfx Amewun Irsveg Edge thickness 0,4-8mm Feeding speed 11m/min. Total length including feeding plate 5573mm Total weight 1860kg Only 592.198 Meters edgebanded. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Laedpfoyu If Njx Amvjg Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel

Year of construction: 1979, condition: good (used), Flat grinding machine make Brand Type: Compact 600/800 with Heidenhain control Laedpfxszvfpyo Amvjg We do not have any further technical data.

Condition: used, Year of construction: 2009, operating hours: 11,707 h, Equipment: all wheel drive, Internal vehicle number: G300381 Available immediately at our yard in Kaufungen. More information: * Luis Lucena * Viktoria Sologubova New Holland F106.6A 6x6 All-Wheel Drive Grader | Approx. 12 Tonnes | Year 2009 Used New Holland F106.6A motor grader, manufactured in 2009. The machine features 6x6 all-wheel drive and an operating weight of approximately 12 tonnes. The grader is ideal for road construction, surface levelling, earthmoving and maintenance work. Technical details: * Manufacturer/Model: New Holland F106.6A * Machine type: Motor grader * Year of manufacture: 2009 * Operating hours: 11,707 hours * Weight: 11,500 kg * Weight class: Approx. 12 tonnes * Drive system: 6x6 all-wheel drive * Environmental badge: None * Technical inspection: New * Vehicle number: G300381 * Condition: Used * German machine Inspection possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Note: The specifications list both 10,700 and 11,707 operating hours. The more precise value of 11,707 hours has been used for this description. Financing example: * Internal number: G300381 * Purchase price: €53,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €839.80 * Residual value: €9,980.00 If you are interested in this offer or would like to adjust it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. Laedexnulbepfx Amvjg We will gladly accept your used vehicle in part exchange. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES LTD. We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), Frigo GYRoCOMPACT 600 Classic spiral freezer, 34 tiers. Had only run for 14,000 hours when the factory closed. Beautiful condition. North South configuration. 34 tiers, 80mm tier height so perfect for burgers, sausages, chicken nuggets, fish fingers, spring rolls, hash browns etc. Lajdewztmaepfx Amvsg

Condition: used, Year of construction: 2007, operating hours: 11,659 h, Internal vehicle number: MK300034 Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. Lsdpfx Amjyzk Iusvsag

Condition: new, mileage: 5 km, power: 18 kW (24.47 HP), fuel type: diesel, empty load weight: 1,525 kg, maximum load weight: 600 kg, overall weight: 2,125 kg, color: blue, gearing type: mechanical, suspension: other, number of seats: 1, operating hours: 5 h, Equipment: all wheel drive, cabin, differential lock, Power steering, switchable all-wheel drive, diesel engine 18.2 kW, 1,319 cm³, 4.6 operating hours, cab, illuminated dashboard, adjustable suspended seat with safety belt, 1 seat, hydrostatic drive, analog fuel gauge, rear swiveling work lights, 2 front weights of 15 kg each, rotating beacon, 3 cylinders, power steering, differential lock, 20 km/h, front hydraulics, braked towing capacity 3,000 kg, lifting capacity 600 kg, diagonal tires front: 6.0-12, rear: 8.30-20, weight 1,525 kg, permissible total weight 2,125 kg. Turf tires available for an additional €500 net. FOR US, CONDITION AND FEELING MATTER MOST; PRICE IS SECONDARY. For further questions, please contact Mr. Faller at the provided number. //*TRADE-IN, PURCHASE, OR FINANCING OF YOUR VEHICLE POSSIBLE! All information without guarantee.* More offers can be found on our homepage. The description and the data provided do not constitute a binding assurance and are not guaranteed. The only binding agreement is the purchase contract concluded at the dealership when the vehicle is bought. Errors and prior sale excepted! Lodewtqmzspfx Amveag

Condition: new, Year of construction: 2025, Item: A-10196-SS-horizontaltank-50m3 Capacity 50.000 L Exterior dimensions: L 8817 mm H 3200 mm Ø 2800 mm. Lodpfxjga I Sqo Amveag Horisontal stainless steel tank AISI 304. Newer used - NEW!

Condition: used, Year of construction: 2015, front tire size: VF600/60R30, rear tire size: 650/65R42, Equipment: compressed air brake, front power take-off, front-end loader, Front loader Alö Quicke Michelin tires / Ljdpfx Ajtncb Iemvjag

Condition: like new (used), Year of construction: 2025, Used cantilever rack: bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 2,600 mm with base section 1,000 mm 12 cantilever arms, 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to absorb the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. Laedped Tbbdjfx Amvog The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of supply: 4 rack uprights, 4,160 mm high, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (1,300 mm spacing) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to withstand the acting loads. The ground conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. Lodpfx Aed Tqalemvsag According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Laodpfx Amsfdkbhsvjg Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (spacing 1,300 mm) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Lajdpfefdkb Tsx Amvsg - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height at 100 mm intervals - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification of delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by wind and snow loads. The substrate must be made of concrete, level, and suitable for dowels, and must be able to absorb the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored to the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted finish (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, 2.56 m high, with base section, 1.0 m usable depth (1.2 m overall depth) 12 cantilever arms with 1.0 m usable depth Ledpfxeguk A Ho Amvsag Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Fastening material (screws, nuts, and washers) (*No paint damage!) Net price for self-collection: €1,490.00 plus VAT. Delivery possible for an extra charge. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Rack height 2,560 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery time - Self-collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subfloor must be made of concrete, level, and suitable for dowels, and must be able to bear the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the floor, as well as any necessary official permits. The rack uprights must be anchored in the floor on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized design Scope of supply: 4 rack uprights, height 3,500 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) Ledpfx Amofdkb Uovjag - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight services with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow loads. The substrate must be made of concrete, level and suitable for dowels, and must be able to absorb the applied loads. The customer is responsible for checking and ensuring the soil condition and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Racking height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Collection on site possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. Ljdpfjguk Dkex Amvsag The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system, hot-dip galvanized Scope of supply: 4 rack uprights, height 2,600 mm, with base section 1,000 mm 12 cantilever arms with a depth of 1,000 mm, standard Including longitudinal and diagonal bracing for a 1,300 mm center distance Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with a usable depth of 1,000 mm - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for a 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsoil must be made of concrete, level, and suitable for anchors, and it must be able to absorb the loads acting on it. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and any necessary official approvals. Laedpfxjguk Dve Amvog The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: new, Year of construction: 2025, ML750 Inner chase size 750 X 520 mm Max. die cutting size 750 X 520 mm Lsdpevv R H Usfx Amvsag Working speed 28±2 s/min Max. rule length ≤15 m Motor power 2.2 kW Weight 2000 kg Overall machine dimensions 1650 X 1540 X 1650 mm

Condition: new, Year of construction: 2026, machine/vehicle number: SU1651-379, fuel type: diesel, motor manufacturer: Kubota V3300-TE2BG2, General information Field of application: Construction Weights Empty weight: 1.005 kg Functional Generator capacity: 40 kVA Dimensions of cargo space: 203 x 82 x 126 cm Other information Fuel consumption: 8.2 Liter / Hour at 75% load Generator: Leroy Somer LSA 42.3 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 140 l Production country: UK Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank Lajdpfx Amsyvx Ulsvog