Used Kuper Veneer Saw for sale (5,946)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 2,400 mm, space requirement length: 9,000 mm, working width: 1,600 mm, Crosswise Veneer Splicing Machine / Cross Splicing Machine Manufacturer: Kuper Model: ACR CrossRunner 1600 Year of manufacture: 2007 Narrow cross splicing machines for pre-glued veneer strips with a small working width. The machine operates significantly faster in cross-feed mode compared to longitudinal machines and is thus an economical alternative, for example, for cross-veneered interior doors or smaller furniture parts. Working width: 1600 mm (along the grain) Veneer strip width: from approx. 60 mm Veneer thickness: approx. 0.3 - 2.5 mm Feed speed: approx. 30 m/min Suitable glues: PVAc or urea glue With automatic stacking Control: Siemens Simatic with touch display Voltage: 400 V, 50 Hz, 3 Ph Kdjdpfxjyayums Agpol Rated current: 16 A Overall dimensions (W x L): approx. 2400 x 9000 mm

Condition: used, used, good conditionmake Kupertype FWJ 900machine no. 18033834throat depth 900 mmthreadheating airmobilespace requirement approx. 1400 mm x 600 mm x 1600 mmweight approx. 350 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Kedpevwfaxjfx Agpsdl

Condition: used, used manufactured by Kuper type Mini 420 range 420 mm thread heating system electrical - new desk model required space ca. l x w x h mm 600 x 400 x 400 weight ca. 20 kg located in 97447 Gerolzhofen Kdsdpfevwf Dwox Agpol sale in current condition as seen - free on truck - without guarantee and guarantee

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Kedpfx Ajkn Rz Hogpjdl Width: 2350 mm Height: 1850 mm

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, type of input current: three-phase, product height (max.): 650 mm, product length (max.): 3,000 mm, product width (max.): 1,350 mm, overall weight: 2,300 kg, input frequency: 50 Hz, nominal power: 59 kW (80.22 HP), temperature: 220 °C, pass-through width: 1,400 mm, Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units Kdedpfsxt Idbjx Agpjl heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: good (used), Code: 0487 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Kjdpfxsxtat Us Agpjdl Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Condition: used, Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft: Ø 19 x 50 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 260/180/H150 mm -Weight: 6.1 kg Kjdpfx Aodzzimegpjdl

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 11 kW 660 V -Price: per piece -Quantity: 180 pieces available -Weight: 0.5 kg Kdedpfx Ageb A N Aljpsl

Condition: good (used), Contactor, semiconductor contactor, contactor Kdsdpfeb A N Aksx Agpjl -Max. 30 kW 660 V -Price: per piece -Quantity: 17 pieces available -Weight: 2 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, FULLY AUTOMATIC SAW WITH AUTOMATIC LOADING TECHNICAL DETAILS Specifications Ksdpfx Ajvk R S Hjgpjdl Manufacturer OMP Model 370 CM PP CNC Year 2002 Condition Used

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 2166, functionality: fully functional, working width: 230 mm, spindle diameter: 40 mm, spindle speed (max.): 6,200 rpm, working height: 125 mm, TECHNICAL DETAILS Minimum working height: 8 mm Maximum working height: 125 mm Kodpfxswyviue Agpedl Minimum working width: 18 mm Maximum working width: 230 mm Minimum feed speed: 6 m/min Maximum feed speed: 28 m/min Spindle speed: 6,200 rpm Spindle diameter: 40 mm MACHINE DETAILS Electrical Data Main fuse: 80 A Machine voltage: 400 V, 3PH, 50Hz Motors Bottom spindle: 5.5 - 7.5 kW Right spindle: 5.5 - 7.5 kW Left spindle: 7.5 - 10 kW Top spindle: 7.5 - 10 kW Dimensions & Weight Dimensions L x W x H: 4,400 x 2,000 x 1,850 mm Weight: 4,000 kg

Condition: excellent (used), Veneer splicing machine Model : KUPER FWJ 920 In very good condition. Ksdpfx Agjtq Ey Tepodl

Condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, empty load weight: 31 kg, For assembling veneers with thicknesses of approximately 0.4 – 2 mm. The KUPER glue thread, applied in a zigzag line by a heated thread guide, guarantees tightly sealed and robust joints. The thread side is positioned inward during pressing, eliminating the need for tedious sanding of adhesive residue. An ideal machine featuring all the advantages of KUPER zigzag gluing machines. Kdjdpfexdxh Eox Agpsl Key features: * Durable PUR coating * Disc wheel system with tolerance compensation for various veneer thicknesses * Stainless steel worktable * Hard chrome-plated pressure roller * 8-step switch for adjusting the heating power * Start/stop foot switch Technical specifications: Throat depth: 630 mm Feed rate: approx. 7 m/min Veneer thickness: approx. 0.4 – 2 mm Drive: 200 V electric motor Voltage: 230 V, 50 Hz Net weight: 31 kg Gross weight: 40 kg Carton dimensions: 97 x 45 x 46 cm Standard accessories: 1 test spool of original KUPER glue thread Type K 12 10 threaders 103070 1 kg separating agent 105661 1 set of tools, 1 operating manual Glue thread supply available on request! Item No. 0115034

Condition: new, functionality: fully functional, Practical – ready for immediate use without instruction. Kedpfjxdxlkox Agpedl The devices are ready for operation after just 5 minutes of heat-up time. The integrated temperature controller allows stepless adjustment of the heat as needed – ensuring the optimal melting temperature for the adhesive thread. The pressure applied with the hand gluer is sufficient to firmly press the adhesive thread onto the veneer sheet. Key advantages at a glance - only approx. 5 minutes heat-up time - precise, straight-line bonding - clean thread separation - maintenance-free Item no. 0132772

Condition: new, functionality: fully functional, For efficient and clean joining of smaller quantities of veneer. A special KUPER glue thread is applied to the joint in a zigzag line. Easy and simple to handle, ready for use quickly, and features low power consumption. All the advantages of the KUPER glue thread. An ideal device for assembling smaller quantities of veneer. The device is supplied fully equipped (ready to connect) with a 2.75 m connection cable (for 230V mains voltage). Net weight: 1.9 kg Gross weight: 2.4 kg Standard accessories: Kdjdpfx Aexdxbfegpel 1 test spool of original KUPER glue thread type K 12, 10 threaders Glue thread available on request! Item no. 0121383

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, For assembling veneers with thicknesses of approx. 0.4 - 2.0 mm. The machine operates using a special glue thread, which is applied in a zig-zag pattern over the joint. High adhesion and tear resistance ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is positioned inward, eliminating the need for sanding off the adhesive medium. Key features: * Torsion-resistant C-frame construction made of steel * Durable PUR coating * Stainless steel worktable * Standard industrial machine heating system * Disc wheel system with tolerance compensation for varying veneer thicknesses * Adjustable heating output for stationary and running operation * Electrically controlled thread tearing roller * Fully automatic start/stop function via light sensor Technical specifications: Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 Volt, 50 Hz, 3-phase Total connected load: approx. 0.97 kVA Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg release agent 105661 1 set of tools, 1 operating manual Glue thread offer available on request! Item No. 0152300 Kdedpfx Ajxdxcpsgpel

Condition: new, functionality: fully functional, For repairing and cross-gluing veneers. Damaged or torn veneers are reliably repaired with the simplest handling. Combined veneer strips achieve optimum tear resistance thanks to end cross-gluing. The perfect design fully utilizes the advantages of the KUPER glue thread. The practical construction of the device allows immediate use without extensive training. After an approximate preheating period of 5 minutes using the temperature controller (sold separately), the KHL 1 is always ready for operation. Light pressure is sufficient to efficiently apply the glue thread to the veneer sheet. Smooth operation is ensured by maintenance-free use. Kdsdpfx Agexdxk Hopsl Net weight: 1.2 kg including 1 spool of glue thread 1.8 kg with temperature controller Gross weight: 2.5 kg Standard accessories 1 test spool of original KUPER glue thread type K 3, 10 threaders, 1 operating manual, item no. 51204 Item No. 0132771

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, total length: 3,950 mm, total width: 1,220 mm, total height: 1,610 mm, overall weight: 1,900 kg, Fully automatic large-format edge polishing machine with CNC control and pivoting milling/polishing unit for finishing sawn or pre-milled surfaces. The machine is suitable for transparent, technical, or decorative plastics (PMMA, PC, PETG, etc.) as well as for the processing of composite materials (PMMA with paper or aluminum). The required process parameters can be conveniently retrieved via the integrated material library, based on the material to be processed and the desired surface finish. A tool recommendation and the corresponding setup for the specific operation are also displayed. The high precision of the polishing table significantly reduces the formation of streaks during processing. Additional mounting points for side stops or further guiding aids allow for flexible adaptation to any product. Specific features: - CNC control with material library - Machine body and front stop - Milling/polishing unit - Working area - Multifunctional table - Tools Technical data*: Material thickness (0°/45°/60°): 2 - 120/85/60 mm Material length: 20 - 3,050 mm (with turnover) up to 6,100 mm Table width: 525 mm Pivot range: 0° - +63° Milling depth (0°/45°/60°): 0.05 - 1.5/3/3 mm Spindle speed: 6,000 - 12,000 rpm Feed speed: 0.1 - 5 m/min Return speed: 50 m/min Number of clamping cylinders: 6 (optionally up to 20) Number of side stops: 1 (optionally up to 8) Extraction port Ø: 100 mm Machine length: 3,950 mm Machine width: 1,220 mm Machine height: 1,610 mm Working height: 926 mm Kodpfjxd Si Aox Agpjdl Compressed air supply: 6 bar Operating voltage: 400 V, 50 Hz, +PE +N Milling motor power: 4.5 kW Drive motor power: 1.2 kW Total power: 7.5 kW Weight: 1,900 kg Tool type: EURACRYL ES with quick-change system Vacuum table: Included Remote maintenance: Included Tool holder: Included (1x tool holder for 4 inserts) Tool: Not included *Subject to material tests, depending on material type, tool equipment, and surface finish Scope of delivery: - 1 operating manual Item no. 0175200

Condition: new, input voltage: 400 V, input frequency: 50 Hz, For joining veneers with thicknesses ranging from approximately 0.3 to 3.0 mm. The machine uses a special glue thread, which is applied in a zigzag line over the joint. High adhesion and tensile strength ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is embedded internally, thus eliminating the need for sanding the adhesive medium. Specific features: * Torsion-resistant C-frame design made of steel * Stainless steel worktable * Standard heating system * SP control system Kdodpfx Agsxdxccjpel * Pneumatically regulated adhesive pressure * Disc wheel system with tolerance compensation for various veneer thicknesses * Adjustable heating performance for both idle and processing modes * Tool-free adjustment of the adhesive pressure roller * Fully automatic start/stop function via photoelectric sensor Technical data: Throat depth: 1250 mm Feed: 4 speeds, approx. 15, 30, 45, 60 m/min Veneer thickness: approx. 0.3 – 3.0 mm Operating voltage: 400 V, 50 Hz, 3 phase Compressed air connection: R 1/4'' Compressed air consumption: approx. 7 NL/min Total connected load: approx. 3.1 kVA Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg release agent 105661 1 set of tools, 1 operating manual Glue thread offers available upon request! Art. No. 0149650

Condition: new, functionality: fully functional, - Device for unrolling and moistening joint paper; including operating manual - for use with joint paper up to 20 mm wide Required joint paper available on request! Kdjdpsxd Sldofx Agpol

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, OUR BESTSELLER – 1000 mm Throat Depth Veneer splicing machine for gluing veneer strips including glue application unit with nearly horizontal glue application disc. Perfect in combination with glue cooling system (optional). NEW INDUSTRY 4.0 All essential machine and performance parameters are recorded, transmitted and made available centrally for analysis (optional). Additional modules for monitoring power and compressed air consumption available (optional). SPECIFIC FEATURES - Innovative veneer feeding system with disc wheels and tolerance compensation mechanism for jointing without offset - Low-maintenance, energy-saving, and veneer-friendly high-performance plastic chains (excellent sliding properties, minimal heat conduction, and no discoloration) - 12 mm slim, chrome-plated heating rails ensure minimal stress on veneer due to shrinking, and significantly reduced energy consumption - Intelligent automatic energy management for standby and operating mode - Intuitive control panel with all key functions at a glance, parameter memory TECHNICAL DATA* Throat depth: 1,000 mm Veneer thickness: approx. 0.35 – 2.5 mm, optionally from approx. 0.25 mm, optionally up to approx. 5.0 mm Veneer lengths: from approx. 300 mm Veneer width: from approx. 35 mm Feed speed: steplessly adjustable from 12 – 55 m/min Operating voltage: 400 V, 50 Hz, 3 Ph + N + PE Total connected load: 4.1 kVA Air consumption: approx. 5 NL/min at 6 bar *Subject to material testing, depending on wood species and micro or thick veneer package (option) only without micro and thick veneer package (option) Kdsdpfx Asxdxktsgpjl GLUES Suitable for urea resin adhesive Glue offer available on request! Item No. 0164700

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Kdjdpfevvlyiox Agpel Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: good (used), Year of construction: 1990, Kuper FW1150 veneer sewing machine, machine no. 30108291, built around 1990 Kedjv Rvpwopfx Agpedl

Condition: new, Number of spindles 6 St. Working width 250 mm Working height 150 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. Kodpfx Aevnv Ubegpodl weight 4770 kg Dimensions (L/W/H) 4722x1860x1776 mm Vierseitenhobelmaschine Kuper SWT XL-6 in Fenster-Version mit elektronischer Axial- und Radialverstellung der Spindeln. Schwerer Maschinenständer, verwindungsfrei und schwingungsarm. Anzahl der Spindeln: 6 Arbeitsbreite: 250 mm Arbeitshöhe: 150 mm Abrichttischlänge: 2500 mm Spindeldrehzahl: frequenzgeregelt 4.000 - 8.000 U/min Vorschubgeschwindigkeit: 6-24 m/min Ausführliche Beschreibung finden Sie in nebenstehender PDF-Datei! (Technische Angaben laut Hersteller - ohne Gewähr!)

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER Kjdswgwmnjpfx Agpedl ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...