Used Lcd Monitor for sale (4,747)

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 285033, type of input current: three-phase, input voltage: 400 V, type of cooling: air, overall weight: 25 kg, electrical fuse: 32 A, cutting current: 105 A, hose package length: 6,000 mm, sheet thickness steel (max.): 50 mm, air demand: 15 m³/h, air pressure: 5.8 bar, protection type (IP code): IP23, product height (max.): 50 mm, High-end air plasma cutter for manual cutting. Although the system is equipped with a manual cutting torch, it can also be used for mechanical cutting. The interface for CNC cutting is already installed Bdjdorq E R Ujpfx Ad Aob The manual cutting torch with a length of 6 meters is included in the scope of delivery. The system was operated in our application center for demonstration purposes. The system has an effective cutting time of less than 30 minutes. Further technical information can be found in the attached document / data sheet

Condition: like new (used), Year of construction: 2022, functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G 30 kN Brake 18 Nm Year of manufacture according to seller: 2022 Comes from a test setup for pressing battery cells. This means it has only been used a short time. Bodpfxowhvrrj Ad Aodb Includes control cabinet, joining module (including sensor as shown), and monitor. Please note: The parts should be complete, but some of the cables have been cut off. Unfortunately, a circuit diagram is not available.

Condition: good (used), functionality: fully functional, mileage: 148,000 km, power: 103 kW (140.04 HP), first registration: 01/2024, fuel type: diesel, next inspection (TÜV): 05/2028, color: white, number of seats: 3, Equipment: ABS, Bluetooth, air conditioning, airbag, cruise control, full service history, power assisted steering, sliding door, soot filter, truck registration, Clean Opel Movano with service booklet – 1st hand Replacement engine – original Opel engine installed 30,000 km ago! Air conditioning, Bluetooth, cruise control, conversion, 3 seats, touchscreen monitor, mirror monitor Bodpfx Aoy H Da Isd Asdb We are also happy to offer you financing!

Condition: used, functionality: fully functional, Tenoning machine by SAUTEREAU in excellent condition Bedpfx Aex U U Irsd Ajdb

Year of construction: 2002, condition: used,

Condition: ready for operation (used), IEC71L28-LC-FA2 series LC three-phase motor water cooled 400V , 200 HZ , 12 kw , IP65 , B5 - flange design, centering diameter 110 mm, 4 x bore Ø 9 on pitch circle 130 mm, shaft smooth 28 x 6 x 60 mm, rated speed: 12000 rpm, Max. Speed: 16000 rpm, dynamically balanced, coolant connection M14 x 1,5 , manufacturer unknown, used, normal traces of use, 100% functional, scope of delivery according to photos Bdedpoi D Id Rjfx Ad Aeb

Condition: ready for operation (used), Complete monitor unit 12" for Siemens control 820,used, normal traces of use, 100% functional, scope of delivery according to photos Bodpfxji Ebwdo Ad Aodb

Condition: ready for operation (used), unipo 2TT1205CDN00 monitor unit TFT 12.1" consisting of 7FPT1462X503 12" UFP display unit + 7BXG0950GH01 UFP control unit, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Bdedpfxexaidio Ad Aob

Condition: ready for operation (used), Philips 4022 226 2251 complete monitor unit, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Bdjdpfx Aji Ecd Sjd Aob

Condition: ready for operation (used), Heidenhain BC 110BF TFT monitor unit. 374 964-01 SN:24807913A, used, normal signs of wear, 100% functional, scope of delivery as per photos Bsdpfji Eagajx Ad Ajdb

Condition: ready for operation (used), Montronix GLCD Operator Panel SN:MTXG000431, used, normal signs of use, 100% functional, scope of delivery as per photos Bdedpfx Adoi Eb Rue Aob

Condition: ready for operation (used), Montronix GLCD Operator Panel SN:MTXG000600, used, normal signs of use, 100% functional, scope of delivery as per photos Bodpfoi Eb Rxex Ad Ajdb

Condition: used, mileage: 236,005 km, power: 132 kW (179.47 HP), first registration: 08/2002, fuel type: diesel, empty load weight: 4,140 kg, maximum load weight: 3,350 kg, overall weight: 7,490 kg, tire size: 215/75R17,5, axle configuration: 4x2, wheelbase: 3,650 mm, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 5, total length: 2,370 mm, total width: 2,850 mm, loading space length: 4,000 mm, loading space width: 2,300 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, cabin, differential lock, low noise, parking heater, power assisted steering, trailer coupling, Vehicle location: Bovenden, Doka, 1x air seat, double bench seat, auxiliary heating, switch 6, ABS (anti-lock braking system), front exhaust, differential lock, rotating beacon, leaf suspension, trailer coupling ball head, trailer coupling air+light, noise protection G1, lashing eyes, U-protection, aluminum side bumpers, pendulum flaps Wheelbase: 3650 mm Body: Double cab with platform body and aluminum drop sides Disc brakes on front and rear axle, tank capacity: 100 l. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bdodpfxsvhhu Hj Ad Ajb - .

Condition: used, mileage: 18,629 km, power: 180 kW (244.73 HP), first registration: 10/2003, fuel type: diesel, empty load weight: 11,325 kg, maximum load weight: 3,675 kg, overall weight: 15,000 kg, tire size: 285/70R19.5, axle configuration: 4x2, next inspection (TÜV): 11/2025, color: red, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: air, number of seats: 6, Equipment: ABS, additional headlights, cabin, differential lock, fog lights, low noise, Vehicle location: Bovenden, Doka, 1x air seat, electric mirror, heated mirror, left electric window, right electric window, ABS (anti-lock braking system), constant throttle, PTO, differential lock, fog lights, work lights, rotating beacon, storage box, air suspension, low-noise G1, 4-point hydraulic outriggers, yellow environmental sticker. Superstructure: Metz turntable ladder DLA-K 12/9 L20FA with 2000l water tank & Rosenbauer N20 fire pump (turntable ladder approx. 1157 operating hours). Fire service-specific superstructure: Metz turntable ladder, 4-point hydraulic vertical outriggers with electronic ground pressure monitoring, 230V power supply to the rescue cage, intercom between the main control station and the cage, load eye on the lower ladder for loads up to 1.1 tons, 2-man rescue cage (180 kg max. payload), permanently piped water supply in the top section of the ladder, holder for power generator on the carriage (with power supply for rescue cage), 2 blue lights (double flashing beacons) on the driver's cab, 1 rear blue light (double flashing beacon), FIAM compressed air horns on the driver's cab roof, 2 front flashers, holder for work site spotlights on the front of the vehicle on the right, 2 halogen spotlights 1000 watts/230 volts, 2 drive-on planks, 4 chocks for outrigger plates, water cannon/monitor for attachment to the rescue cage, access ladder for hanging on the base of the ladder, stretcher support for attaching to the rescue cage, hanging device for attaching to the rescue cage, plug-in hanging device for climbing and lowering devices, reflective contour markings on the podium. Firefighting equipment: Metz fire engine, driver and crew compartment for 1+5 crews, seating arrangement in the crew compartment facing the direction of travel, 2,000-liter GRP water tank with electric level indicator, Rosenbauer N20 centrifugal fire pump, 2xB pressure outlets, quick-intervention reel for 50-meter DN25 pressure hose, storage for TP4/1 submersible pump, brackets for 4 self-contained breathing apparatus in the crew compartment, storage for a chainsaw, storage for 60 liters of foam agent in canisters, proportioner for medium and low-expansion foam pipes, storage for 4x B and 6x C roll-up hoses. The vehicle was used in firefighting service until December 2024. The vehicle is being sold due to replacement. The vehicle is being sold for replacement. 10-year factory inspection performed in 2013 at Rosenbauer in Karlsruhe: Bdjdpfxsv T U Eco Ad Ajb - Hydraulic hoses replaced, oil and filter changed, - Main control cable replaced in the ladder system, - Ladder set measured - All hydraulic cylinders checked and sealed. Manufacturer inspection according to DGUV Principle 305-002 on December 2023. Last service with engine oil change performed in December 2023 at 17,948 km. The vehicle batteries were replaced in December 2022. Tires replaced (6-piece) in November 2019. The vehicle was serviced annually by the manufacturer... ACCESSORIES INFORMATION IS SUBJECT TO GUARANTEE. Subject to change, prior sale, and errors! - .

Condition: new, Year of construction: 2026, TECHNICAL SPECIFICATIONS ZOPO V10-B X-axis travel 1,000 mm Y-axis stroke 620 mm Z-axis travel 630 mm The distance spindle nose to table 120 ~ 750 mm T-channels 5 x 18 T channel distance 100 mm The size of the working area of the table 1,200 x 600 mm Maximum weight per table 800 kg Spindle taper type BT 40 Main axis motor power (30 min./continuous) 15/11 kW Main shaft motor torque S1 - 52,5 Nm / S2 - 95,5 Nm / S3 -118, Nm Main shaft transmission Direct drive Maximum speed of the main shaft 12,000 rpm SPECIFICATION OF X, Y, Z AXES Rapid feed on the X/Y axis 36 m/min Rapid feed on Z-axis 32 m/min Maximum feed X/Y/Z axes 10,000 mm/min X/Y axis motor power (Torque) 3 kW (20 Nm) Z axis motor power (Torque) 3 kW (36 Nm) ATC TOOL SHOP (automatic tool change) Tool magazine type With arm Tool magazine capacity 24 Tool holder type BT 40 Tool change time 2.5 sec. ACCURACY X/Y/Z positioning accuracy ± 0.008 mm X/Y/Z repeatability ± 0.005 mm MACHINE DIMENSIONS Length x width 2,850 x 2,450 mm Height 2,850 mm Weight 6,800 kg ACCESSORIES INCLUDED IN THE PRICE Fanuc 0i-MF controller with 10.4˝ color LCD monitor Main shaft with direct coupling (Direct Drive), motor 11/7.5 kW and maximum speed 12,000 rpm 3 axes controlled simultaneously Linear guides with rollers on the X, Y, Z axes 45mm Tool magazine with arm with 24 positions Cooling unit with tank Oil spindle cooling system Bdedpfsiyyypex Ad Aob Spindle air blowing system Air gun System for separating oil from the coolant (Oil Skimmer) Chip conveyor with chain Closed electrical panel with air conditioning Communication interfaces for programs and data: RS 232 interface, CF card and USB M30 automatic shutdown Transformer Centralized automatic lubrication Rigid tapping Inside machine LED work lamp x2 LED warning lamp in 3 colors MPG (manual pulse generator) mobile remote control with cable Screws and soles for leveling the machine Tool box + tools Operating manuals and spare parts list Telescopic guards for all 3 axes Fully enclosed workspace with self-locking doors CE mark 2 year warranty on control 1 year on machine Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten bv Coevorden, Holland

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut FSCUT, controller model: 2000E, laser type: fiber laser, laser source manufacturer: MAX/RAYCUS 3000, laser source model: 3000, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 1,350 mm, table width: 930 mm, working length: 1,300 mm, working width: 900 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, fume extraction, CNC Laser machine for sheet metal, complete close and compact design. IMPACT CL-1390 Fully automatic Metal Cutting Machine 1300*900 fiber laser cutting machine with economical price. Small laser cutting machine, compared to regular laser cutting machines, boasts higher precision and excels in cutting high-reflective materials with smaller kerfs and no burrs, thereby reducing the cost of secondary processing. Often referred to as a "desktop" or "medium-format" model, its enclosed design and axis configuration make it the gold standard for safety and detail. Maximum Safety & Environment - The fully enclosed cabinet provides a light-tight environment, protecting operators from laser reflections and eliminating the need for safety goggles. It also features a dedicated ventilation port to efficiently extract fumes and dust, keeping your workspace clean and healthy. Compact & Versatile - With a 1.3m x 0.9m workspace, this model bridges the gap between hobbyist tools and massive industrial cutters. It is small enough to fit through standard double doors but powerful enough to handle most type of production parts. Stability and Protection - The "closed" box structure acts as a rigid frame, reducing vibrations during high-speed movements. Additionally, the enclosure protects sensitive internal components—like the laser head and guide rails—from external debris, significantly extending the machine's lifespan. IDEAL for precision parts, thin sheets and small-medium size workpieces: • Auto-focus laser head and Automatic edge detection; Bedpfx Aox Rn Tmjd Asdb • Stable cutting quality; • Compact footprint with complete closed design for safety and environment, CE standard; • Easy to operate. Intelligent control system Intelligent control system, real-time monitoring, many functions, safe production, large-size high-definition screen, ergonomic design. Windows interface with CYPCUT software controller offers a simple yet intuitive control with optimization and nesting functions included. Also it allows internet connection so that a remote intervention can be made when needed. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display Automatic oil lubrication system Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system OD4+ laser protection glass system with fully enclosure Voltage stabilizer & regulator unit CE mark Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, functionality: fully functional, Year of construction: 2026, DESCRIPTION SH3 Fully-enclosed Fiber Laser Cutting Machine The SH Series is a Fully-enclosed Fiber Laser Cutting Machine independently developed and produced by Baison Laser, suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, titanium alloy, and galvanized aluminum-zinc. It meets various cutting needs for medium and thin sheet metals. Technical specifications Features • Fully Enclosed Protective Cover design also on the back side of the machine according to CE; • Electric Control for door and platform with back pannel control with emergency button; • Dual monitoring LCD displays (video cameras + controller); • Emergency botton on remote control; Bedexfrhnspfx Ad Aedb • Dual table lifting system at the same level for extra precission; • Electrical cabinet complete CE with safety relay and AC Unit; • Independent cabinet for Laser source, also with AC unit; • Glass OD4+ laser protection system with fully enclosure according to CE. • Rubber protection seals around bottom side of the machine that provides better exhaustion for the smoke inside. Processing Format & Working Range Processing Area (L×W): 3.050 x 1.530 mm X-axis Stroke: 1.530 mm Y-axis Stroke: 3.050 mm Z-axis Stroke: 100 mm Max Single Lifting Platform Loading: 800 kg Accuracy X/Y Axis Positioning Accuracy: ±0.03 mm/m X/Y Axis Repositioning Accuracy: ±0.02 mm Speed Max. Moving Speed: 120 m/min Max. Acceleration Speed: 1.5 G Power Parameters Power Supply: 380V/50Hz/3Phases Protection Grade: IP54 Weight & Size Machine Size: 8.896*2.440*2.210 mm Machine Weight: 5.800 kg Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 3,000 W, Description BAISON M3: (3 kW) from stock Europe. table length 3.050 mm table width 1.530 mm laser head Ray-tools autofocus laser capacity in Kw 3 Raycus total power requirement 25-30 kW We can deliver from (1 till max 6 Kw) overall dimensions 4750x2260x2100 mm weight of the machine ca. 4.550 kg Configuration: - Raycus Laser source 3 Kw (opt. other laser power) - Cypcut (full option control) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - Nesting, With leapfrog, Edge seeking, Fly cutting - 2x LCD monitor control, keyboard, control panel - central Lubrication system - video camera inside machine Cutting capacities: - normal steel 20 mm - stainless steel 12 mm - aluminum 10 mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3050 mm - Y-axis travel 1530 mm - Z-axis travel 100 mm - Axis speed X / Y: 120 m / min - Positioning accuracy: +/- 0.03 mm/m - Repeatability accuracy +/- 0.03 mm – Acceleration max. 1,2 G Table platform 1500mm complete outside for leading: - table load 1000 kg. assisting gases: - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar)   including: - Complete safety features for CE - Safety relay - Protection grade IP54 - Spare part basic supply package with nozzles and lenses - Professional software for cutting and nesting metal sheets - AC unit for electrical cabinet - Pneumatic table holders clamps for thin metal sheet, anti-vibration system - Automatic door-up and table-out system - Dual temperature water cooling system - Machines for cutting sheets metal - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components - Light barrier for moving table, safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Bedpevcbf Isfx Ad Ajdb Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 650 mm, spindle bore: 106 mm, turning length: 2,130 mm, turning diameter: 650 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 4,290 mm, total width: 2,553 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 11,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 400 V, drill spindle diameter: 106 mm, nominal power (apparent): 20 kVA, number of spindles: 1, spindle nose: A1-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 119,500.00!!!!! The machine is immediately available and NEW. Delivery of the machine in overseas packaging from our warehouse. (Transport of the machine at the buyer’s expense) Operating materials to be provided by the buyer. Commissioning and training by Milltronics: EUR 5,000.00 Leasing possible (subject to creditworthiness) Machine Details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface • USB interface • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automatic sequences • Custom macros available • Override potentiometers for axes and spindle • Spindle load monitoring • Key switch to lock EDIT function • Lights to indicate operating status • Additional “M” function with CNC wait channel • Constant cutting speed • Rigid tapping • Spindle speed 30 – 1,600 rpm • Spindle motor 18 / 11 kW, 2-stage electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 positions 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One tool holder for boring bars 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list and circuit diagrams in digital format • Operating manual and maintenance manual in digital format • Transformer for standard industrial power supply 400 volts, 3 phase • Lifting brackets for crane transport Bdjdpfx Asy Hqhfed Aeb Optional accessories: Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in combination with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Travelling steady rest with brass pads, range 20 mm - 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Foot mat with Milltronics logo

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Bedpfoxn Ax Aox Ad Aodb

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, spindle motor power: 5,000 W, spindle speed (max.): 24,000 rpm, This 3-axis VITAP Point K2 TOP 2.0 was manufactured in 2018. It features continuous machining with a maximum workpiece weight of 80 kg and dimensions of Y 1200 mm and Z 50 mm. The machine includes an automatic 4-station tool changer and a dual “0” reference laser for precise positioning. If you are looking to get high-quality CNC processing capabilities, consider the VITAP Point K2 TOP 2.0 machine we have for sale. Contact us for further details. • Condition: not rebuilt, without warranty • CE compliantMachining and axes • Continuous machining, machining from below, automatic return of workpiece to operator • 3 controlled axes: • X-axis: uninterrupted workpiece transport via DDT (Dual Dynamic Transport System) with brushless motor • Y-axis: drilling head travel • Z-axis: drilling • No workpiece length limitation • Rear workpiece exitReferencing and positioning • Dual “0” reference laser (transmitter/receiver) for start/end detection; compensates for dark-edged materials • Program readjustment for drilling from below for flushness on vertical/horizontal workpieces • Side stops with rollers (fixed and movable), mechanical digital readout, automatic alignment to 0-stop, removal up to 3 mm on the 0-line • Constant side clamping device for precise positioning on the 0-line • Adjustable zero point for 4-sided formattingTooling and heads • Automatic 4-station tool changer • 12 independent vertical spindles • Horizontal spindles: • X-axis: (2+2) • Y-axis: (2+2) Bsdpfx Aoy Hrdzed Aedb • 1 saw (Ø 100 mm) • 5 kW electrospindle, ISO 30 taper, 12,000–24,000 rpm • Spindle speed (additional spec): 3500 rpm • Max vertical tool diameter: 35 mm • Max horizontal tool diameter: 12 mm • Max vertical drilling depth: 45 mm • Max horizontal drilling depth (X/Y): 30 mmCapacities • Max workpiece weight: 80 kg • Max workpiece size: X unlimited, Y 1200 mm, Z 50 mm • Min workpiece size: X 270 mm, Y 185 mm (70°), Z 4 mm • Feed rate: 25 m/minControl and software on machine • 19" 5/4 TFT LCD monitor • Industrial PC • WSC operator interface with Lister, parametric tooling, and parametric setup • CAD TPA EDI32 graphical programming, basic version • USB port • Saving of all files • Macro programming • Import of DXF filesUtilities and extraction interface • Dust extraction air volume: 2000 m³/h • Exhaust speed: 30 m/s • Exhaust ports: 2x Ø 100 mm + 1x Ø 50 mm • Motor: 1.7 kW • Compressed air: 7 bar • Max air consumption: 60 Nl/min • CE STANDARDS Additional equipment • Office software – License

Condition: used, functionality: fully functional, power: 1.7 kW (2.31 HP), workpiece length (max.): 99,999 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 50 mm, workpiece weight (max.): 40 kg, number of axes: 4, actuation type: electric, total height: 2,140 mm, total length: 3,080 mm, total width: 1,610 mm, overall weight: 1,515 kg, feed rate X-axis: 25 m/min, milling spindle speed (max.): 3,600 rpm, saw blade speed: 7,000 rpm, Equipment: CE marking, Technical Data - Number of independent vertical spindles: 12 Bdodpfxey Id Rie Ad Aob - Number of independent horizontal spindles on X-axis: (2+2) - Number of horizontal drilling spindles on Y-axis: (2+2) - 1 saw blade (Ø 100 mm) - 5 kW electrospindle with ISO30 taper (12,000-24,000 rpm) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited / Y 1,250 mm / Z 50 mm - Min. workpiece dimensions: X 270 mm / Y 150 mm (70 op) / Z 3 mm - Feed speed: 25 m/min - Spindle speed: 3,600 rpm - Saw blade speed: 7,000 rpm - Max. horizontal tool Ø: 12 mm - Max. horizontal drilling depth on X and Y axes: 35 mm - Max. vertical drilling depth: 43 mm - Max. vertical tool Ø: 35 mm - Motor: 1.7 kW - Adjustable zero point for four-sided sizing - CE compliant The DDT Feed System: Double Dynamic Transport Two clamps ensure continuous workpiece transport. The operator feeds the workpiece up to the stop. Both clamps grip the workpiece and position it precisely. During machining, the clamps communicate with each other so that clamp #2 holds the workpiece before clamp #1 releases it. This ensures a constant feed rate even during linear milling operations. - Laser measurement for detection of workpiece start and end. - Measured values can be incorporated into and used to adapt the respective program. - Side stops with rollers, consisting of a fixed and a movable part, equipped with a mechanical digital indicator for automatic alignment to the zero stop, allowing a material removal of 1 mm up to 3 mm along the zero line. - Constant lateral pressure device for precise positioning at the zero line. - Automatic four-position tool changer - Adjustable zero point - No limitation on workpiece length Peripherals and additional features - LCD-TFT monitor - Industrial PC - User interface WSC with list mode, parametric tooling, and parameterizable setup - USB port - Storage of all files - Macro programming - Import of DXF files possible

Year of construction: 2026, condition: new, Suitable for dressing and profiling diamond and CBN grinding wheels. Accessories: Total enclosure, Rush camera system with high-resolution B / W camera (15x, 30x, 60x zoom), autom. Zoom control, video overlay (CAD drawing on live image) with 22 "LCD monitor and Ruvision software, On-board PC with Windows and 17 "monitor, Glass scale on the linear axes X and Z, 2 machine lights 12 V, Cooling system 30 Liter tank, Automatic delivery and tilting via servomotors, control panel with touch, Automatically starting position at the end of the work process, Central lubrication, Mist extractor. Bdsdpfx Aed R Naajd Ajb Specifications: Grinding wheel holder HSK 50 E, diamond grinding wheel diameter 50 - 250 mm, max. grinding wheel width 70 mm, grinding wheel bore diameter 20 mm, speed of the diamond / CBN wheel spindle stepless adjustable 100 - 1000 rpm, connected load of the motor of the grinding wheel 1,75 kW, grinding wheel transverse stroke 160 mm, grinding wheel longitudinal stroke 120 mm, radius of the grinding wheel 0 - 60 mm, dressing wheel 175 x 12 x 32mm, turning speed of the dressing wheel 200 - 2000 rpm. (stepless adjustable) ,, Oscillating speed of the dressing wheel 3400 mm / min (stepless adjustable), oscillating stroke of the dressing wheel 0-50 / min (stepless adjustable), connected load of the motor of the dressing wheel 0.75 kW (400 V / 50 Hz), Weight approx 1520 kg, dimensions 1340 x 1300 x 1900 mm, colour grey / red.

Condition: used, Year of construction: 2013, Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring. Circular saw blade diameter: 200 - 840mm Circular Saw Bore Diameter: from 16 mm Tooth pitch: 6 - 180mm grinding path: up to 25 mm tangential relief angle: 0 to 10 degrees max. grinding wheel diameter: 125 mm Bdodpfx Adev Sbmqo Asb Grinding wheel bore diameter: 32 mm Grinding spindle variable: 1600 - 5500 rpm, Connected load approx.: 8kVA (400V / 50Hz) Dimensions W x D x H =: 2770x1900x2045mm mass: approx. 4700 kg colour: Gray

Year of construction: 2026, condition: used, Description: Suitable for dressing and profiling diamond and CBN grinding wheels. ccesories: Total enclosure. Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel), Wheel motor strengthened to 4 kW, Dressing wheel motor strengthened to 2,2 kW, 2 Machine lights 12 V, Optical linear scale with digital display counter (0,001 mm) X, Z Axes, 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120X included), High performance swivelling angle reader (0,05°), Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm, Stepless oscillation speed, Automatic central lubrication, SIC Wheel dresser manual, Grinding wheel holder:: HSK 50 E Diamond grinding wheel diameter: 50 - 250 mm max. width of grinding wheel: 70 mm Grinding wheel bore diameter: 20 mm Speed of the diamond / CBN disc spindle: infinitely variable 100 - 1000 rpm., Radius of the grinding wheel: 0-30 mm Dimensions of the dressing wheel: 180 x 25 x 31.75mm, Speed of rotation of the dressing wheel: 200 - 2000 rpm., Oscillation stroke of the dressing wheel: 0-70 mm Connected load of the motor of the dressing wheel: 2,2 kW Bdedpjlfil Sefx Ad Aeb Weight approx: 1400 kg Dimensions L x W x H: 1850x2300x2100mm,