Used Linck Clamping Device Linck for sale (18,297)

Condition: refurbished (used), Complete Cutting Machine Group from LINCK: 1.Pre-cut feed table Linck EV20 (condition:good) 2.Chipper canter LinckV18 (condition: good) Itodpfx Acervh Tmowog 5.Boad separator unit Linck SE (condition: refurbished) 1. EV20- Pre-cut feed table Linck EV20 for smaller logs. Hydraulic unit is included. 2. Chipper canter LinckV18. 2x85 KW motor with direct drive. Completely refurbished set. We can also offer full electrical installation and assembly of line on site.

Condition: reconditioned (used), Year of construction: 1993, multi-saw with moving saw linck masker saw with a movable saw floating on hydraulics Itodelwp Diopfx Acwog

Condition: good (used), Image processing control unit, camera control Itedpsxvp S Eefx Acwjg -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm -Weight: 1.4 kg

Year of construction: 1978, condition: reconditioned (used), Planer thicknesser 600 mm, planing width 600 mm, planing height 180 mm, 3-knife cutterhead, cutterhead diameter 125 mm. Fully overhauled, technically sound and ready for operation. New electrical system, all required lubrication points present. Cast iron body, weight 890 kg. Foldable tables, table height adjustable. Grease nipples at all necessary locations. Iodpfoyabltox Acwetg

Year of construction: 1985, condition: good (used), Linck recutting group consisting of: EV 40 infeed V40 chipper with pull-out rollers Ijdpfxoufqice Acwstg with 2x75/100 kW MKV circular resaw with side board separator with 2x200 kW incl. hydraulic units without switch cabinets can be inspected by arrangement. System can also be offered overhauled!

Condition: excellent (used), cutting height (max.): 120 mm, cutting width (max.): 700 mm, Right-hand machine, machine number 188 Iedpfxjv Raqxj Acwjtg Electrically adjustable hydraulic width adjustment Infinitely variable feed rate from 0-80 m/min 37 kW drive motor with V-belt pulley, motor tensioning rail, Various saw heads, shims, and saws Infeed table with individual trestles Fixed outfeed table The machine has been completely overhauled and is in excellent condition.

Condition: like new (used), Device for cleaning die-cut sheets Isdpfewyxi Rox Acwjtg German production, Metabo. 230V power supply. Easy-to-use, manual device for removing external waste from the pallets of die-cut sheets. Safe, two-handed operation of the device.

Year of construction: 2006, condition: not inspected (used), functionality: unexamined, machine/vehicle number: 42394, No minimum price – guaranteed sale to the highest bidder! Bidding is binding for timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Itodpfey D Nl Djx Acwjg Dimensions of the storage surface: 250 mm x 250 mm MACHINE DETAILS Operating voltage: 230 V Frequency: 50/60 Hz Rated current: 2.5 A Dimensions & Weight Dimensions (L x W x H): 250 x 250 x 130 mm Weight: 20 kg External reference: 77

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Iodsx A Hfvopfx Acwstg Max length workable: 2500 mm Max height workable: 1340 mm Max feed speed: 40 m/min

Condition: used, machine/vehicle number: 008254, Max width workable: 700 mm Itjdpox A Hfpsfx Acwsg Max length workable: 2600 mm Max height workable: 1300 mm

Condition: excellent (used), - Dimensions: 1006x595x1495 mm - Power supply type: Electric - Number of clamps: 3 - Smooth surface - Heating plates: 3 zones at the bottom, 2 at the top - Voltage: 400V - Power: 22 kW - Weight: 358 kg Ijdpfx Acowyb T Eewetg - Refurbished equipment: Equipment is prepared upon order; pickup and return times are agreed at that moment (please request price after refurbishment).

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate Isdpfx Acey S Rnijwetg -Mounting plate: Straightening plate with support ribs and adjustable feet -Length: 3000 mm -Width: 1250 mm -Sheet thickness: 48 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 3000/1255/H900 mm -Weight: 3500 kg

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 5,000 kg, empty load weight: 2,100 kg,

Condition: used, length 1200 mm width 710 mm height 1000 mm weight of the machine ca. 1,4 t Itsdpfx Acsy Tbvtswog Edge distance: 120/100 mm Groove size: 34mm Thickness: 80mm Number of grooves: 4x4

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: WMW, thread cutting device type GSA 1 -Recording: MK1 / B12 -Reversing gear: Quick return integrated -Clamping diameter: max 6 mm Isdpfx Acotxkunjwstg -Thread cutting sizes: M2-M4 -Number: 2x thread cutting chucks available -Price: per piece -Dimensions: 125/100/60 mm -Weight: 0.7 kg

Year of construction: 2026, condition: used, NEW – Year of construction 2026 Automatic loading and unloading station. Suitable for solid wood, MDF, gypsum fiberboard, cement fiberboard, and panel materials. Examples: doors, boards, MDF panels, fronts, gypsum fiberboard, facade panels. Adaptations to other products are possible. The machine operates at a constant speed and with a set loading and unloading capacity. This allows you to easily automate your feeding and stacking processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel. Technical data: - Manufacturer: Ka-Ma - Type: KR-1300-1 - Working width: 1,300 mm Itedpfxjy S S Hto Acwjg - Including belt conveyor, length 3,000 mm - Working height: 930 +/– 50 mm - PLC control, operation via a touch panel, Siemens S7-1200 - Loading and unloading of parts using 2 suction plates, length 442 mm - Automatic signal after the loading process is completed - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height: approx. 1,000 mm (including pallet under the stack of panels) - Loading side on the left when viewed in the direction of travel - Vertical working stroke: approx. 1,200 mm - Max. lifting weight: approx. 85 kg, continuous operation 65 kg - Max. component width: 1,300 mm - Max. component length: approx. 2,850 mm - Max. conveyor belt speed: continuously variable up to max. 10 m/min - Electrical motor power: 1.5 kW - Electronic components: Schneider Electronics and Siemens - Weight: 1,200 kg Optional: - 2-circuit vacuum system with 4 additional suction cups, which lifts the panels by 15 mm on one side before the vertical movement. This is required for all through-suction materials.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. Itedpfexqxw Tsx Acweg The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1 Itsdpfsxqxt Iox Acwog

Condition: used, functionality: fully functional, Hydac FCU2210 Fluid Control Unit Hydraulic Service Unit with Accessories Iodpfx Acsv I Tdgswotg # 7044

Condition: used, length 700 mm width 500 mm height 105 mm weight 260 kg Iodpfoy S D Rwsx Acwjtg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 700mm Width: 500mm Height: 105mm Weight: 260kg We have two identical magnetic chucks with the same dimensions. See S9063

Condition: used, length / mm Itjdpfx Aoy S Dzpjcweg width / mm

Condition: new, Year of construction: 2021, weight / kg taper MK / Material: iron 200x60x150mm Itjdpfx Asy S Dxhocwog Opening size: 150mm Magnetic force: 10-20kg Inventory: 4

Condition: excellent (used), We offer you: Embossing device for achieving form-fit connections Manufacturer: HWR Type: SOLIDStamp Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale! Itsdpsw Ra Hqofx Acwjg

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: Standard configuration: - Robust machine base - Dowel system for: Dowel diameter 8 mm, Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), Dowel protrusion 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free gun - Vibratory feeder for dowel transport - Dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels - Water tank (stainless steel, 7.5 l) - Closed water system with 6 bar water pressure and spray nozzle - Electronic control with: - Main switch On / Off - Program selector switch Water / Water + Feeding - Potentiometer for dowel feed via vibratory feeder - Potentiometer for adjusting water injection quantity - Control lamp for indicating minimum water level in the water tank - Mobile base - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for opposing hole processing: 1 unit HoKuTech | DübelJet with upgrade kit for LeimJet including fixtures for attaching/connecting to the DübelJet including height-adjustable suspension for glue hose including: 1 HoKuTech | LeimJet Glue dispensing unit for opposing hole processing Viscosity for PVAc glues up to 75,000 mPas Includes dowel nozzle for Ø 8 mm, pointed nozzle Iedewx Aadepfx Acwotg Location: Flörsheim Availability: Immediately

Condition: used, functionality: fully functional, 4 used adjustable wheel clamps for recovery crane, etc., fully functional. Iodpfx Aoy S R Enecwotg No shipping possible. Please do not send email enquiries! If you have any questions, you can reach us by phone. Viewing and collection only by prior telephone appointment. Subject to changes, prior sale, and errors. We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!