Used Linear Guide Sr 15 L=164 for sale (74,751)

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Nlodpowu Dbujfx Akusb Generator: Stamford or equivalent Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Condition: good (used), Year of construction: 2014, functionality: fully functional, overall weight: 2,200 kg, KUKA KRC4 linear axis 1500/3T Article number: 8143984 Serial number: 143984 The KUKA KRC4 linear axis is a high-quality axis that is ideal for industrial applications. It offers precise motion control and is particularly important for automation processes and robotic systems in manufacturing. With its robust design, it guarantees reliable performance in demanding applications. Nljdpfxevzr Sve Akueb

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 280 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 320 mm, controller model: OSP 700L, TECHNICAL DETAILS Nledpfjy S S Hgox Akueb Maximum turning length: 280 mm X-axis travel: 155 mm Z-axis travel: 320 mm Spindle speed: 4,200 rpm MACHINE DETAILS Control system: OSP 700L Turret: V12, direct mounting EQUIPMENT Chip conveyor Touch probe Coolant pump Parts collector Collet chuck

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: BM0000029, functionality: fully functional, controller model: WINDOWS XP, number of spindles: 42, plate height: 60 mm, plate length: 2,800 mm, plate width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Vertical CNC machining center for drilling, milling, and dowel insertion with an additional robotic arm for loading! The machine must be picked up between June 10, 2026, and June 30, 2026! The machining center consists of two machines as follows: 1. BIESSE BREMA VEKTOR 15-18 R Working area X-axis: 2,800 mm Working area Y-axis: 1,300 mm Number of controlled axes: 3 axes Total number of drilling spindles: 42 Total number of tool changer positions: 10 Maximum panel thickness: 60 mm Nlodjy Uvnaepfx Akuob Automatic panel loading system Automatic panel stacking system Drilling units Drilling unit 1: Horizontal drilling spindles in X Number of horizontal drilling spindles in X: 9 Drilling unit 2: Horizontal drilling spindles in Y Number of horizontal drilling spindles in Y: 9 Drilling unit 3: Vertical drilling spindles Number of vertical drilling spindles: 24 Milling spindle Number of milling spindles: 1 Number of controlled axes milling spindle: 3 Automatic tool changer: Yes Number of tool magazine slots: 10 Control and safety Control system: WINDOWS XP Machine programming software: BKEEPER Safety standard: EC marking Safety system: Safety light curtains 2. KUKA KR 180 L100-2 K 2000 Maximum panel width: 1,300 mm Maximum panel length: 2,800 mm Maximum payload: 100 kg Number of controlled axes: 6 Arm reach: 3,700 mm Number of panel stacking stations: 3 Control system: KR C 2 EQUIPMENT Automatic panel loading system Automatic panel stacking system Barcode scanner HONEYWELL Protective netting on the machine The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8530

Condition: ready for operation (used), Year of construction: 2010, operating hours: 17,250 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, In 2015, a new spindle was installed! TECHNICAL DETAILS Travel range X-axis: 710 mm Travel range Y-axis: 520 mm Travel range Z-axis: 520 mm Maximum spindle speed: 18,000 RPM Number of tool magazine slots: 30 Tool holder: SK40 Distance between T-slots: 63 mm Rotational speed of the 4th axis max.: 40 RPM Rotational speed of the 5th axis max.: 40 RPM 4th axis swivel range: 360 x 0.001 degrees 5th axis swivel range: 0 ± 102 x 0.001 degrees MACHINE DETAILS Nljdjy Thlnspfx Akuob Control system model: Heidenhain - Mill Plus Operating hours: currently 36,500 hours Spindle hours: currently 17,250 hours EQUIPMENT Programmable coolant nozzles Coolant gun Chip conveyor 40 bar internal coolant system with 600 l paper filter system Measuring probe 3D Quickset Laser tool measurement Visiport Handwheel Signal light Operating mode 4

Condition: used, empty load weight: 9,230 kg, maximum load weight: 32,770 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2023, suspension: air, tire size: 385/65 R22,5, color: other, Year of construction: 2023, gearing type: mechanical, Equipment: tail-lift, Unladen weight: 9,230 kg, total permissible weight: 42,000 kg, tyre size: 385/65 R22.5, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, lift axle, hydraulic tail lift, 1x15-pin connector socket, LAMBERET SR2L REFRIGERATED/FREEZER SEMI-TRAILER / CARRIER VECTOR HE 19 MT MULTITEMP / -30 +30 / DHOLLANDIA 2,000 kg TAIL LIFT 13.40x2.50x2.60m / FLOWER WIDTH, 4,379 total hours Nledpfx Akoy A Udioueb

Condition: used, empty load weight: 9,270 kg, maximum load weight: 32,730 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2023, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, loading space volume: 87 m³, suspension: air, color: white, Year of construction: 2023, gearing type: mechanical, Equipment: tail-lift, Unladen weight: 9,270 kg, gross permitted weight: 42,000 kg, loading space (L W H): 13,400 mm x 2,500 mm x 2,600 mm, cargo volume: 87 m³, air suspension (air/air), underrun protection, lift axle, hydraulic foldable aluminium tail lift, connector 1x15 pin, LAMBERET SR2L REFRIGERATED/FREEZER SEMI-TRAILER / CARRIER VECTOR HE 19 MT MULTITEMP / -30 +30, DHOLLANDIA 2,000 kg tail lift 13.40x2.50x2.60M / flower width, 2,063 total hours. Nedsyytlajpfx Akuelb

Condition: used, empty load weight: 9,270 kg, maximum load weight: 32,730 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2023, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, loading space volume: 87 m³, suspension: air, color: other, Year of construction: 2023, gearing type: mechanical, Equipment: tail-lift, Unladen weight: 9,270 kg, gross vehicle weight: 42,000 kg, loading space (L W H): 13,400 mm x 2,500 mm x 2,600 mm, loading volume: 87 m³, air suspension, underrun protection, lift axle, hydraulic tail lift, 1x15 pin connector, LAMBERET SR2L REFRIGERATED/FREEZER SEMITRAILER / CARRIER VECTOR HE 19 MT MULTITEMP / -30 +30 / DHOLLANDIA 2,000 kg tail lift – 13.40x2.50x2.60 m / flower width / total 4,379 operating hours. Nsdpfx Ajylc U Tjkuslb

Condition: used, mileage: 1,026,739 km, power: 265 kW (360.30 HP), first registration: 08/2014, fuel type: diesel, number of seats: 60, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 1,000 mm, total height: 1,000 mm, Year of construction: 2014, Equipment: ABS, air conditioning, cruise control, disability-friendly, = Additional Options and Equipment = Nljdpfxsx Itnws Akusb - Air conditioning - Wheelchair lift - Webasto heater = Further Information = Damage: none = Company Information = We are an international company based in Belgium, approximately 20 km from Brussels. Belgian Bus Sales is your ideal partner for purchasing and selling used buses and features an extensive parking area, which serves as a showroom. We always have numerous buses of all brands, capacities, models, and price ranges in stock. We can find the right coach, school, or city bus to suit your needs and budget. All information is provided without guarantee. Subject to errors, interim sale, and typing mistakes. Opening hours for used bus viewings: Mon-Fri: 08:30 am - 12:00 pm, 12:30 pm - 5:00 pm. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 53,201 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 1,585 mm, controller manufacturer: SIEMENS, tool weight: 10,000 g, number of axes: 7, This 7-axis Gildemeister GMX 400 Linear was manufactured in 2005. It features a maximum turning diameter of 640 mm and a turning length of 1585 mm. The machine is equipped with a Siemens Sinumerik 840D Powerline CNC control and offers rapid traverse speeds of 40 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister GMX 400 Linear turn-mill centre we have for sale. Contact us for further details. • B-axis swivel range: ±120° • C-axis resolution: 0.001° • Rapid traverse (X/Y/Z): 40 / 24 / 60 m/min • Maximum turning diameter: 640 mm • Standard turning diameter: approx. 400 mm • Maximum turning length: 1585 mm Nedpfx Aksy Uvxxjuelb • Bar capacity: approx. 90–92 mm • Chuck diameter: 250 mm • Counter spindle speed: 4000 rpm • Maximum torque: approx. 600–730 Nm • Milling spindle: Integrated motor spindle (ISM) with B-axis • Milling spindle speed: 12,000 rpm • Milling spindle power: 13.2 / 22 kW • Milling spindle max. torque: approx. 100 Nm • Turret: 12-position driven turret • Tool shank: 40 mm, DIN 69880 • Tool length limits: 200–350 mm • Maximum tool diameter: 80–140 mm • Maximum tool projection: 60–70 mm • Connected load: 100 kVA • Additional notes: Linear drive technology; Made in Germany; Machine under power and available for inspection Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Item: GEA - Damrow Cheese Vat 15.000L Used GEA Damrow type Double-O, capacity 15.000 l, Double jacketed, Insulated, CHeese vat with agitators Double-O. Good working condition! Nedey Tzkqepfx Akuslb 3 pieces to offer! NOTE! Control unit.with Siemens Simantec Touch display

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours Nodpfoy Umklsx Akuelb 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 74500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine for concrete pile drilling, soil improvement, and vibrocompaction. Carrier device Sennebogen SR25BT (manufactured in 2008) with drilling attachment Delmag RH18 (manufactured in 2009). Drill table stroke 12.50m, total height 19.91m. Outreach 3.165 - 4.00m. Feed winch, winch for feed with freewheel, auxiliary winch, rear platform. Drill table SHT25, THE KDK ROTARY DRILL HEAD BT180-2 IS NOT PRESENT, PURELY A SOIL IMPROVEMENT DEVICE, drilling gearbox MBDA 3500 ABI. With single auger. NO Kelly bar. Mast support cylinder, automatic alignment. Hydraulic telescopic undercarriage with a width from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at BH 3.304. Drills and drilling accessories are available separately. Also available is a mobile mixing plant, brand MAT, consisting of a mixing container (throughput capacity 20m3/h), conveyor screw, mixing tank (capacity 4,000l), and plunger pump with remote control. The condition of the machine corresponds to the value of the operating hours. At the time of inspection in 2023, the machine was running/functioning without any abnormalities. As of October 2024, storage damages have occurred to valves, control, and hydraulic hoses. It is not possible to operate the machine with 2 attachments at the same time. The machine shows wear and tear appropriate to its age, mileage, and purpose of use on pins and bushes as well as signs of use (dents, abrasions, etc.). The machine was not tested under load. The machine was used with 55 and 80 paddles. After service and maintenance of the storage damages, the device is ready for use. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40844 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 200,000 km, power: 120 kW (163.15 HP), first registration: 07/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 15, total length: 6,961 mm, total width: 1,993 mm, total height: 2,815 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle number: 7498X ---- Why autonext GmbH? ---- One of the largest commercial vehicle exhibitions nationwide. Always over 400 vehicles available immediately. Largest selection – best prices. More than 1,000 satisfied customers annually – top customer reviews. WhatsApp Chat: ### Offer: Financing from 4.99% ### ---- Excellent Condition! ---- Single owner, German vehicle, non-smoker vehicle Full service history, maintained exclusively at Mercedes Benz Next service due in 20,300 km As-new rear brakes As-new all-season front tyres Body: Maxi Tourer Number of seats: 15 Roof air conditioning Automatic climate control (Tempmatik) Auxiliary heater Electric side step Reversing camera Lane keeping assist Navigation system Microphone Roof window On request, we offer a retrofit towbar for only €599, and, if possible, an upgrade to a towing capacity of up to 3.5t ---- Special Equipment: ---- * Additional heater (air), electric * 250 A generator * Audio system Audio 15 (radio with colour display) * Outside temperature display * Single-pole battery isolator switch * Roof control unit with reading light, driver/passenger side * Entry lighting * Driver assistance system: Lane keeping assist * Digital tachograph, downloadable * Rear door windows * Rear compartment window, fixed, left rear * Rear compartment window, fixed, right rear * Rear compartment window, fixed, middle left * Rear compartment window, fixed, middle right * Rear compartment window, fixed, front left * Rear compartment window, fixed, front right * Automatic climate control (Tempmatik) * Fuel filter with water separator * Light and rain sensor * Front engine PTO with bracket for additional coolant compressor * Spare wheel matching road tyres * Spare wheel carrier under frame end incl. jack * Reversing camera * Interior rearview mirror * Front mud flaps * Driver's seat with comfort headrest * Comfort driver's seat in cab * Rear stabiliser bar * Reinforced front stabiliser bar * Reinforced shock absorbers * Fuel sender for auxiliary heater * Standard interior lining in load/passenger area * Fleece battery, 95 Ah * Preparation for additional heat exchanger * Reinforced front axle * Cabin insulation * Insulation for load/passenger compartment * Thermal insulation glazing (windscreen with top band filter) Nljdpfx Akoyrwv Eeuob * Additional heater (hot water) * Cargo area sliding door partial stop ---- Standard Equipment: ---- Third brake light, adaptive brake light, driver airbag, anti-lock braking system (ABS), drive type: rear-wheel drive, washer fluid level display, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated indicators, brake assist, brake system with ABS+ASR, cab roof lining, electronic stability program (ESP), two electric windows, 6-speed manual transmission (Eco Gear), lockable glove compartment, rear door (180-degree opening angle), body/superstructure: standard high-roof van, child safety lock, fuel tank: main tank 75 litres, full partition wall in load area, lashing points/anchor rings, headlight range adjustment, model update, engine 2.1 litre – 120 kW CDI CAT, particulate filter, wheelbase 4325 mm, smoker package, low emissions according to Euro 6, right-hand side sliding door in load/passenger area, power steering

Condition: used, axle configuration: 3 axles, first registration: 02/2005, loading space length: 7,500 mm, loading space width: 2,420 mm, loading space height: 1,430 mm, total length: 8,600 mm, total width: 2,500 mm, total height: 3,300 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2005, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy wheels = Remarks = Number of axles: 3, Own weight: 5,280 kg, Gross weight: 42,000 kg, Type of chassis: Complete chassis, Chassis material: Aluminium, Kingpin size: 2 inch, Alloy wheels, ABS, EBS, Body year: 2005, Body material: Aluminium, Number of sides: 1 side, Tipper drive: PTO, Drum volume: 25, Drum volume in: m3, Axle type: MERCEDES-BENZ = More information = General Information Cab: Day cab Registration: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tyre tread left: 6 mm; Tyre tread right: 13 mm Axle 2: Tyre tread left: 11 mm; Tyre tread right: 9 mm Axle 3: Tyre tread left: 12 mm; Tyre tread right: 3 mm Weights Unladen weight: 5,280 kg Payload: 36,720 kg Gross vehicle weight: 42,000 kg Environment Emission class: Euro 0 Condition General condition: Moderate Technical condition: Moderate Optical condition: Moderate Damages: None = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, model years, and price categories. Why buy at Kleyn Trucks? It's simple! • Large, rapidly changing stock • Verifiable quality • Good prices • Professional business conduct • We speak many languages • We understand our customers Nlodpey Tuimsfx Akusb • Assistance with import and transport • (Export) registration plates are arranged quickly • Expert technical services • The security of 'verifiable quality' • And more... Please visit our website for special offers and our complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask us directly about our European warranty package.

Condition: ready for operation (used), Baumüller BUS21-15/30-30-001, fully refurbished and tested by qualified personnel, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Serial number: 89312467. Nlsdpfx Aksy T Utxousb

Condition: used, Technical details: Heating: 15 kW rated current: 28 A Heating capacity: 15 kW current: max.71 A cooling water consumption: 11 l/min frequency range: 10-25 kHz frequency range: 50/60 voltage: 400-480 +-10% V current- max.: 3020 A weight: 406 kg dimensions L x W x H: 1,25 x 0,8 x 1,6 m The device is a mobile induction heater with medium power (15 kW), suitable for: Local heating of metals (e.g., bearings, bolts, screws, pipes, sheet metal edges). Nsdpfxoxfvlde Akuslb Preheating for welding processes Soldering and shrinking applications Heat treatments (e.g., tempering or hardening of smaller components). Due to its frequency range of 10–25 kHz, the device is more suitable for medium to large workpieces, as the penetration depth at these frequencies is higher than with high-frequency systems. *

Condition: new, Year of construction: 2026, Continuous/normal drilling capacity 15/18 mm (in E335/St60) 17 Nm Threading capacity M12 (depending on pitch) Nlodpfx Aoxgdn Ajkujb Spindle: MK II Drilling depth: 70 mm Overhang: 220 mm Distance spindle/work surface: max 750 mm Column diameter: 70 mm Usable work surface W x L: 300 x 250 mm T-slot size (arm), spacing (mm), width (mm) Number: 2, 125, 14/26 Speed display: Digital Drilling depth display: Digital Drilling depth stop: quickly adjustable stop ring Drilling feed: manual Table height adjustment: hand crank/rack and pinion Motor: three-phase 230V with frequency inverter: 0.75 kW Spindle speed: 40-4,000 rpm Machine dimensions: 420 x 540 x 1,780 mm Weight: 88 kg Accessories (optional) Drilling kit 2 consisting of: - Machine vise [felix] 2.0 80 mm - Quick-change drill chuck B16 1-13 mm (accuracy 0.17 mm), - Tapered shank MK 2 B16 and reducing sleeve MK 2 to MK 1 €315.00 Factory warranty: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, mileage: 342,000 km, power: 129 kW (175.39 HP), first registration: 05/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,800 mm, fuel: diesel, brakes: engine braking, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 9,250 mm, total width: 2,600 mm, total height: 3,730 mm, permissible axle load (axle 1): 5,300 kg, permissible axle load (axle 2): 10,500 kg, loading space length: 7,450 mm, loading space width: 2,480 mm, loading space height: 2,400 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, spoiler, tail-lift, traction control, Technical information Number of cylinders: 6 Engine capacity: 7.698 cc Max. front axle load: 5300 kg Max. rear axle load: 10500 kg Weights Empty weight: 7.870 kg Carrying capacity: 7.130 kg GVW: 15.000 kg Functional Tail lift: 1500 kg Financial information Price: On request Identification Registration number: BD-386-G Other information Cool unit make: Carrier = Additional options and accessories = - Heavy duty engine brake - LED- lighting - Outside temperature display - Radio MB sound system - Rear air suspension - Roof spoiler - Vehicle heater - Visor = Remarks = Nodpfx Aey S Uv Dekujlb Cool unit brand: Carrier

Condition: used, Linpac 15pcs. transport trolleys for Trolley euroboxes underframe 800x600x200 mm 300kg load capacity RA2210 Technical data: Length: 800 mm Width: 600 mm Height: 200 mm Load capacity: 300 kg for two paralell euroboxes Material: stable plastic body Underride height: approx. 100 mm Weight: approx. 9.1 kg Configuration: 2 steering and 2 fixed castors Purchase quantity 15, stacked L x W x H approx. 800 x 600 x 2270 mm Total weight: approx. 136.5 kg Year of manufacture: unknown Stackable: yes, through cutouts Condition: Used / fully functional Color: red Nsdpfx Akjtu Rmgeujlb Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 01/2012, loading space length: 10,610 mm, loading space width: 2,510 mm, loading space height: 2,610 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Year of construction: 2012, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: BPW EcoPlus Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Weights Empty weight: 6.960 kg Carrying capacity: 18.040 kg Nsdsy Sz Duspfx Akujlb GVW: 25.000 kg Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg Make of bodywork: Groenewegen Jumbo Plywood Box Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 6,500 rpm, overall weight: 6,000 kg, bar diameter (max.): 42 mm, travel distance X-axis: 50 mm, travel distance Y-axis: 350 mm, controller manufacturer: MITSUBISHI, controller model: M730UM, number of axes: 10, This 10-axis DMG MORI Sprint 42/10 linear was manufactured in 2021. It features a maximum spindle speed of 6500 1/min and includes a high-pressure cooling system of 20 bar. The machine is equipped with a bar feeder of 3200 mm length and offers advanced capabilities for precision turning. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 42/10 linear machine we have for sale. Contact us for further details. • Maximum Speed Spindle 1: 6500 1/min • Maximum Speed Spindle 2: 6500 1/min • Max. travel Z-axis 120 mm • Electrical Phases: L1,L2,L3,N,PE • Power Consumption: 57 kVA • Maximum Input Current: 82 A • Main Fuse: 100 A • Short Circuit Rating: 5 kA • Maximum Voltage: 440 V • Operating Voltage: 400 V • Voltage Tolerance: ±10% • Frequency: 50 Hz • AC Voltage: 230 V • DC Voltage: 24 V • Counter Spindle Flushing: Included Nledpfey T Hzujx Akuob • Counter Spindle Inner Cooling: Included • Main Spindle Inner Cooling: Included • Radial Driven Drilling and Milling Unit for Revolver: Included • Axial Driven Drilling and Milling Unit for Revolver: Included • Angular Adjustable Driven Drilling and Milling Unit: Included • High Pressure Cooling System: 20 bar • Bar Feeder: IEMCA BOSS 552 • Bar Feeder Length: 3200 mm Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2016, 2x compressor units 10 bar, Boge, screw compressor, incl. compressed air dryer, compressed air tank with sound insulation hood – used –: Price per unit ex location (net): €4,950 (net) Manufacturer: Boge Model: C 15 LDR-350 Year of manufacture: 2016 Volume flow: 1.70 m3/min Final compression pressure: 10 bar Motor speed: 3000 rpm Motor power: 11 kW Operating hours as of 16.04.2024: 25,929 / 27,938 (currently approx. 30,000 h and 31,000 h respectively) Compressed air dryer Type: DS18-2 / 575145405 Serial number e.g.: 400392250004 Min/Max refrigerant pressure: 1.3 MPag / 2.2 MPag Min/Max air pressure: 0.1 MPag / 1.6 MPag 230V Nodpfxewxw E Uj Akuolb Compressed air receiver: Manufacturer: BWB 306 169 Capacity: 350 L Max. operating pressure: 11 bar Max. temp.: 100°C Min. temp.: -10°C Test pressure: 16.5 bar

Condition: used, Year of construction: 2007, x-travel 885 mm y-travel 600 mm z-travel 600 mm control iTNC 530 Heidenhain Max. rpm 1 - 28.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 119 / 85 Nm tool taper HSK A63 Swivel range milling spindle B: -10° / +110° ° spindle bearing diameter 80 mm table diameter 750 mm rotation range C: 360 ° rotary speed max. 100 min/-1 max. table load 600 kg feed speeds 1 - 90.000 mm/min rapid traverse 90 m/min Feed force X/Y: 13,8 kN Feed force Z: 10,35 kN number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 140 mm max. tool length 300 mm max. tool weight 10 kg max. workpiece height 460 mm Max. Workpiece Area ca. 750 x 600 mm passage max. 600 mm total power requirement 60 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,5 x 4,5 x 3,0 m CNC-Machining Center Vertical DECKEL MAHO - DMC 75 V linear - 5-Axis-Machining - NEW SPINDLE from 12/2022 ! - Swiveling Milling Spindle (-10° / 110°) Nlsdjtqmpiepfx Akueb - Rotary Table 360° - extensive tool package - only approx. 900 spindle hours (after exchange) - WITHOUT clamping devices, WITHOUT exhaust!

Condition: used, Year of construction: 2004, turning diameter max. 560 mm turning length 600 mm control 840D powerline Siemens greates pass round over bed 680 mm Swing dia. over traverse guideway 565 mm centre distance 620 mm turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 25 / 37 kW max. Torque 390 Nm spindle nose 170H5 spindle bearing diameter 120 mm usable bar diameter 65 mm max. chucking diameter 250 mm C-Axis 0,025° / 360 ° Spindle speed range subspindle 20 - 7.000 min/-1 power capacity - Sub spindle 25 / 33 kW max. Torque 213 Nm spindle bearing diameter 90 mm spindle bore 57 mm spindle nose 140H5 C-Axis 0,025° / 360 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tools max. 4.500 min -1 power capacity - driven tools 12,2 kW tool taper VDI 40 DIN 69880 Tool dimensions with square shank 40 mm x-axis 185 mm y-axis 80 mm z-axis 620 mm rapid traverse X: 60 m/min rapid traverse Y: 15 m/min Nedewmf Tpspfx Akuelb rapid traverse Z: 45 m/min total power requirement 50 kVA weight of the machine ca. 7 t dimensions of the machine ca. 6,0 x 3,0 x 2,5 m CNC Turning- and MillingCenter GILDEMEISTER - CTX 420 linear V6 - Main and sub spindle - Tool drive - C axis / Y axis - Partial hollow clamping device - ShopTurn - Surface - Package bar processing consisting of: - Hollow clamping device 66mm - Workpiece picking device - Incl. 2x driven tools - Incl. 4x double tool holders - Incl. 4x tool holders - Incl. 83x tools

Condition: used, Year of construction: 2003, turning diameter max. 246 mm turning length 600 mm control 840 D Powerline Siemens greates pass round over bed 400 mm Swing dia. over traverse guideway 300 mm centre distance 600 mm turning speed range - main spindle max. 6.000 min/-1 power capacity - main spindel 16 kW max. Torque 155 Nm spindle diameter in front bearing 100 mm spindle bore 68,5 mm spindle nose 140H5 Spindle speed range subspindle max. 4.000 min/-1 power capacity - Sub spindle 7,5 kW max. Torque 48 Nm spindle diameter in front bearing 75 mm spindle bore 37 mm spindle nose 140H5 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tools max. 5.000 min -1 power capacity - driven tools 3,7 kW max. Torque 24 Nm tool taper VDI 30 Tool dimensions with square shank 20 x 20 mm x-axis 160 mm z-axis 450 mm rapid traverse X: 60 m/min rapid traverse Z: 45 m/min Feed force X: 2,5 kN Feed force Z: 4 kN rapid traverse C: 200 1/min max. Torque C: 155 Nm total power requirement 32 kVA Nlodpfxoypv Tqs Akujb weight of the machine ca. 3,8 t dimensions of the machine ca. 8,0 x 3,0 x 2,7 m CNC - Turning- and MillingCenter GILDEMEISTER - CTX 320 linear V5 - Main- and Subspindle - tool-drive - C-Axis - ShopTurn