Used Lp Gas for sale (3,914)

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, year of last overhaul: 2026, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned Kdodpfsy S Rtlex Aktel All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,000 mm, table length: 4,020 mm, table width: 2,010 mm, spindle speed (max.): 5,000 rpm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, table load: 12,000 kg, workpiece weight (max.): 12,000 kg, overall weight: 29,000 kg, spindle nose: 200-1200, spindle motor power: 45,000 W, PORTAL-TYPE MACHINING CENTER, YEAR OF MANUFACTURE 2015 LARGE TRAVEL RANGE: 4000 x 2100 x 1000 MM DUAL SPINDLE, ISO 50, 5000 RPM, 45 KW EQUIPPED WITH HEIDENHAIN TNC 530 32-TOOL TOOL CHANGER CHIP CONVEYOR MANUAL ANGLE HEAD TOOL PRESETTER Ksdsy Tu I Nspfx Aktodl PREPARATION FOR WORKPIECE PROBE (PROBE NOT INCLUDED)

Condition: excellent (used), Year of construction: 2016, 1. Gas burner WEISHAUPT WM - G30 - 3800 kW, with gas line Dungs DN 65 Output: 400-3800 kW Design: ZM-LN Year of manufacture: 2016 2. Gas burner WEISHAUPT WM-G30/2-A - 4100 kW, with gas line DUNGS DN65 Output: 450-4100 kW Design: ZM Year of manufacture: 2010 3. Gas burner WEISHAUPT G50/1-B - 4000 kW, with gas line DUNGS DN65 Output: 550-4000 kW Design: ZM-NR Kdedpfewg Hkcsx Aktel Year of manufacture: 2004

Condition: excellent (used), Year of construction: 2020, 1. Kdjdpfx Akjwgyrtstol WEISHAUPT WM-G10/4-A, (with gas duct) - Output: 100-1100 kW - Design: ZM-LN - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2015 (1 unit), 2013 (2 units available) 3. WEISHAUPT WM-G10/2-A Design: ZM-LN Output: 75-630 kW Year of manufacture: 2021 4. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 125-900 kW - Design: ZM-LN - Year of manufacture: 2011 5. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2011 6. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2009

Condition: excellent (used), Year of construction: 2011, Description For sale is a functioning and very well-maintained gas burner from the Weishaupt G70 brand, including the gas line (Dungs DN 100). Kodsign Iwjpfx Aktsdl 1. Burner type: G70/2-A Output: 1000 - 10900 kW Design: ZM Year of manufacture: 2004 Connection pressure: 100-4000 mbar 2. For sale are functioning GAS BURNERS G70, 7000 kW, with control cabinet and control unit, gas line DUNGS DN 80. WEISHAUPT Type: G70/1-B Design: ZM-LN Output: 700-7000 kW Year of manufacture: 2011 - Delivery is possible upon request. - All technical data can be seen in the pictures. Preferred sale to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors.

Condition: used, Impulse shielding gas welding machine REHM type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding unit with inverter welding power source Kdsdjwa Uwdspfx Aktjl Serial no. Year of manufacture 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Continuously adjustable range Mains connection 400 Volt, 50 Hz, 32 Amp plug - separate 4-roller wire feed unit with connecting hose package meters - digital display for voltage and current - pulse welding function with single and double pulses - 2-stroke and 4-stroke welding function - 4 meter Binzel hose package with central connection - water-cooled - shielding gas pressure regulator - MIG/MAG pulse arc welding - MSG double pulse welding - MIG/MAG welding Space requirement L x W x H 1150 x 510 x 1350 mm Weight 200 kg good condition

Condition: used, MIG / MAG Pulse Gas-Shielded Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Output: 330 amps = 50% duty cycle (DC) 300 amps = 60% duty cycle (DC) 210 amps = 100% duty cycle (DC) Stepless adjustment range Open circuit voltage approx. 50 V Kodpfx Ajyv H Elektedl Open circuit voltage approx. 30 V Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and amperage - Pulse welding function - Various welding programs selectable Welding methods: MIG/MAG/TIG (programmed and manual modes) 2-stroke, 4-stroke, 4-stroke special, and spot welding - Welding control with program memory and disk drive for external program storage - Separate 4-roller wire feeder FRONIUS Type VR 152 with connecting hose package approx. 1.5 meters - 4-meter BINZEL hose package with central connection - External Fronius water cooling unit Type FK 71 - Welding gas pressure regulator - Supplied with 1.2 mm welding wire Space requirements (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration

Condition: used, Year of construction: 2013, operating hours: 2,990 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fuel type: gas, construction height: 2,540 mm, gearing type: automatic, Equipment: cabin, head guard, Doosan G30G. Forklift with a load capacity of 3,000 kg and 2 doors. Unladen weight: 4,600 kg. Lifting height: approx. 4 m. Tow hitch, heater, 2 sliding windows, turn signals, Ksdpoy S Ng Dsfx Aktsdl work lights, fork length approx. 1 m, windshield wiper, power steering, suspension seat, reversing alarm, 4-cylinder engine. Daily purchase of commercial vehicles, trade-ins also possible. Price: €6,900.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. Kdsdpfx Aoy R Npisktol The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2021, load capacity: 3,000 kg, lifting height: 4,330 mm, total length: 4,040 mm, - Antrieb Treibgas - Bedienung Sitz - Tragfähigkeit/Last kg 3000 - Lastschwerpunkt mm 500 - Lastabstand mm 485 - Achslast mit Last vorn/hinten kg 6230/980 - Achslast ohne Last vorn/hinten kg 1490/2720 - Spurweite vorn mm 1010 - Spurweite hinten mm 965 - Neigung Hubgerüst vor/zurück Grad 6/11 - Sitzhöhe mm 1110 - Kupplungshöhe mm 335 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4115 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4315 - Wenderadius mm 2430 - Kleinster Drehpunktabstand mm 720 - Fahrgeschwindigkeit mit/ohne Last km/h 18,5/19,0 - Hubgeschwindigkeit mit/ohne Last m/s 0,51/0,55 - Senkgeschwindigkeit mit/ohne Last m/s 0,50/0,50 - Steigfähigkeit mit/ohne Last % 23 Kedpfx Akjy S Epuetsdl - Max. Steigfähigkeit mit/ohne Last % 26/20 - Betriebsbremse Hydraulisch - Motorleistung nach ISO 1585 kW 44 - Nenndrehzahl 1/min 2570 - Zylinderzahl / Hubraum cm3 4/2237 - Arbeitsdruck für Anbaugeräte bar 147 - Ölstrom für Anbaugeräte l/min 65-74 - Schalldruckpegel nach EN 12 053, Fahrerohr dB(A) 77

Year of construction: 2000, condition: used, functionality: fully functional, machine/vehicle number: 00051523, Offered for sale: 3D Laser Scanner Brand: VIRTEK LASER QC Model: LPS-1DS Used, in working condition. Collection by the buyer. Assistance with dismantling/transport can be arranged if required. If interested or if you have any questions, please feel free to send me a message. Inspection on site possible by appointment. Further metalworking machinery available, such as bench drilling machines, press brakes, pillar drills, eccentric presses, heavy-duty shelving, welding tables, MIG/MAG welders, compressors, etc. – please check my other listings. Kjdpfxex Dbdis Aktodl Domestic price: net plus VAT or Net export price Collection only – dismantling and transport by the buyer or as agreed. If interested or if you have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim română Viber / WhatsApp / Skype We can handle all customs clearance and registration matters for an additional fee. We can deliver the vehicles to the port for an additional charge.

Condition: used, Year of construction: 2018, Overview This atmospheric filling machine was manufactured by Alfatek in 2018 and is designed for filling 330 ml bottles with crown caps. The machine achieves an output of 800-1,000 bottles per hour and was last used for beer filling. Technical details  Filling principle: Atmospheric Output: 800-1,000 bottles/hour Bottle format: 330ml Capper: 26mm crown cap Kdedpev Rq Dpsfx Aktjl

Condition: excellent (used), Year of construction: 2008, Weishaupt RGMS 30 dual-fuel burner, gas + heavy oil Output: 2300 kW Year of manufacture: 2008 Please arrange an inspection by phone beforehand! We prefer to sell to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical errors or data transmission errors. Of course, we will also take care of all formalities. Loading possible. Kdodpfx Aemnqbwsktel

Condition: not inspected (used), functionality: unexamined, We are selling a used gas console here, which was used for an Eltropuls plasma nitriding system. Kjdjy Sxtgjpfx Aktsdl Included are 4 Bronkhorst mass flow controllers (MFCs), as well as other control electronics. We acquired these components as part of a package with other components, but we do not need them. Therefore, these components are offered here as-is, untested, as a source of spare parts for interested parties.

Condition: used, mileage: 386,209 km, power: 338 kW (459.55 HP), fuel type: gas, gearing type: automatic, axle configuration: 2 axles, overall weight: 2,600 kg, first registration: 12/2020, emission class: euro6, driver cabin: sleeper cab, suspension: air, brakes: retarder, tire size: 385/55R22,5, number of seats: 2, front tire size: 385/55R22,5, rear tire size: 315/70R22,5, number of beds: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, navigation system, onboard computer, parking heater, spoiler, truck registration, | Iveco S Way 460 LNG Multi-Chassis | Automatic transmission, retarder | Lane keeping assist | Hands-free system | Air conditioning, multi-function steering wheel | Cruise control, differential lock | Electric windows, electric mirrors, refrigerator | Lane keeping assist, cruise control | 2 x 598l tanks | Steering, lifting | Errors, typos, and prior sale excepted. Kdodpfjy Tnbiex Aktsl

Condition: excellent (used), Year of construction: 2000, used Weishaupt burner ----- RGL70 2-A/ ZM year of manufacture: 2000 output: 1,000 - 10,500 kW Kjdpfxoxf Dzye Aktedl

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Lisec gas filling press for maximum unit sizes of 3500 x 2500 mm, year 2001, consisting of: - RTVN-15/25ST, extension conveyor for measuring section, belt type, year 2001 - RTVN-15/25MZ, measuring section for gas filling press, belt type, with height and length measuring as well as measuring of glass and spacer width, year 2001 Kedpoy Swfzofx Aktodl - FPS-36/25U2T, gas filling press for Argon, spindle type, with shape filling option, the machine is already equipped with Sigmatek DIAS control system and LENZE servo motors and controllers, the machine also can do 4-sided step units (bottom 50 mm, front, top and rear 130 mm) year 2001 - RTVB-15/25ST, press outlet conveyor, roller type, year 2001 The machine can be seen at our warehouse in Hofkirchen/Austria on appointment.

Condition: good (used), functionality: fully functional, Lisec IG-line for double and triple glass units up to 2500 x 1600 mm, year 1993 - 1999, consisting of: RTV-38/16WE, washing machine inlet conveyor, 1993 VHW-16V8, glass washing machine with 8 brushes for low-e, 2 hot water tanks, 2 sand filters, and blower, 1993 RTVB-16/16ST, washing machine outlet conveyor, 1997 Sofsolution LineScanner RTVB-11/16 ST, inlet conveyor frame set, 1997 RSVB-27/16, frame set section, 1997 RTVB-27/16MZ, measuring section for gas filling press, 1997 FPS-25/16U, gas filling press for Argon, 1997 RTVB-22/16ST, press outlet conveyor 1, 1997 RTVB-22/16ST, press outlet conveyor 2, 1997 RTVB-27/16ST, press outlet conveyor 3, 1997 RTVB-11/16, inlet conveyor for cork applicator, 1997 APK-3/16, automatic cork application device, 1997 RTVB-11/16, outlet conveyor for cork applicator, 1997 RTVB-11/16VE, inlet conveyor sealing robot, 1999 VL-1N/16, automatic sealing machine for double and triple glass units, 1999 VLA-25, VL-extension with corner correction rollers, 1999 Kdodper Iil Ejfx Aktjl DOS-1/PU, mix and metering station for PU, including nozzle purching device,1999

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 5,042 h, load capacity: 4,000 kg, lifting height: 5,550 mm, free lift: 1,692 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,650 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,320 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4000 – 2015 – 5,042 MTH – LPG (GAS) – TRIPLEX 5,550 mm – FORK POSITIONER – FULL FREE LIFT – AFTER FULL SERVICE – NEW TYRES – OPTIONAL 4,050 mm SPREADER BAR – CONDITION 5/5 🔹 Used and new forklifts with quality guarantee – FT LOGISTICS 🔧 Ready for operation. No compromises. This COMBILIFT C4000 promises dependable logistics with zero downtime. Designed for tough environments and fully reconditioned both technically and visually, this forklift is in like-new condition and available for immediate use. 🔍 Key technical specifications: Kjdpfjy Tqipjx Aktjdl 📅 Year: 2015 | ⏱ 5,042 hours ⛽ LPG (gas) | 🏋️ Capacity: 4,000 kg 📐 Triplex mast: 5,550 mm | ⬆️ Free lift: 1,692 mm 🔄 Fork positioner 1,320 mm | Forks 1,200 mm ➖ Optional spreader bar: 4,050 mm 🛞 New solid tyres (100%) ❄️🔥 Fully enclosed heated cab ⚖️ Operating weight: 6,100 kg | 🎯 Load centre: 600 mm 📏 Height 2,400 mm | Length 2,400 mm | Width 2,250 mm | Overall height 2,650 mm ✅ Technical condition: 5/5 | ✨ Visual condition: refurbished, corrosion-free 🏭 Perfect for: narrow aisles, timber/steel/pipe industries, long loads, indoor and outdoor operations. 🔒 FT LOGISTICS – Quality we guarantee. Service you can trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 5,567 h, load capacity: 4,000 kg, lifting height: 9,300 mm, free lift: 3,250 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 4,250 mm, motor manufacturer: G.M., gearing type: hydrostat, battery capacity: 100 Ah, fork carriage width: 1,320 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27/10-12, overall weight: 10,700 kg, empty load weight: 6,700 kg, total height: 2,450 mm, total length: 2,450 mm, total width: 2,250 mm, color: red, Equipment: all wheel drive, cabin, head guard, lighting, pallet forks, 🔍 Looking for a reliable forklift? We are industry specialists! We specialize in the sale of high-quality forklifts, offering tested machines in excellent condition. Check out our offer and find the perfect equipment for your business! 💼 🚜 In this listing we present: COMBILIFT C4000 – TRIPLEX 9300 mm – Year 2017 – GAS – FREE LIFT – FORK SIDE SHIFT – CONDITION 5/5 The forklift is in excellent technical condition, fully serviced and ready for immediate operation. ✅ 📊 Key features & technical data: Model: COMBILIFT C4000 Year of manufacture: 09/2017 Load capacity: 4000 kg Mast type: Triplex Kdodpfoy Tqiiox Aktjl Lifting height: 9300 mm Drive: Gas ⛽ Load center: 600 mm Engine manufacturer: G.M. Engine power: 74 HP Total weight: 6700 kg Free lift: 3250 mm Tires: Solid, superelastic, in good condition Front tires: 200/50-10 – 100% tread Rear tire: 27/10-12 – 100% tread Overall mast height (lowered): 4250 mm Technical condition: Fault-free, fully serviced 🔧 Visual condition: Very good 👍 Fork length: 1200 mm Overall height: 2450 mm Overall length: 2450 mm Overall width: 2250 mm Fork positioner width: 1320 mm 🛠️ Equipment: Extendable forks Work lights Adjustable boom Pallet forks Enclosed cabin Freelift Fork side shift ✅ This forklift is a perfect solution for industries that require efficient handling of long loads in narrow spaces, such as the timber, steel, or pipe industry. Thanks to its multi-directional movement system, it allows for easy maneuvering and maximizes warehouse space usage. 🌟Additional features: Integrated multi-directional control system Comfortable operator cabin High reliability in intensive operations Ideal for both outdoor and indoor use 🟢 Condition: The machine is fully operational, regularly serviced, and ready to work immediately. 🚚 We offer transport across all of Europe and include a FREE initial inspection! 💶 Pricing & financing: We offer full support with financing, including quick leasing and credit approvals – even for start-ups or businesses with limited credit history. Invoicing in EUR or PLN available Leasing and start-up financing programs We are an authorized supplier for most leasing companies Leasing decisions within 2 hours! ⏱️ FAST / SIMPLE / AFFORDABLE FINANCING

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 5,458 h, load capacity: 300 kg, lifting height: 4,900 mm, free lift: 1,380 mm, load center: 60 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,380 mm, fork length: 1,050 mm, fork width: 1,200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16X7X10 1/2, rear tire type: cushion tires (black), rear tire size: 22X10X16, overall weight: 9,500 kg, empty load weight: 6,500 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: yellow, Equipment: CE marking, all wheel drive, front guard, head guard, lighting, pallet forks, sideshift, COMBILIFT C3000CB – GAS / TRIPLEX 4900 mm / FORK POSITIONER / SIDE SHIFT / FULL CABIN / EXCELLENT CONDITION 🔧 4-WAY / MULTIDIRECTIONAL FORKLIFT Used Forklifts with Certified Quality – FT LOGISTICS ✅ The Combilift C3000CB is a compact, powerful four-way multidirectional forklift – fully serviced and ready for work. Ideal for timber, steel, and pipe industries, or warehouses with narrow aisles. Combines strong LPG performance, precision control, and operator comfort. ⚙️ SPECIFICATION • Year: 2012 | Hours: 5,458 | Power: LPG / Gas ⛽ • Capacity: 3,000 kg | Mast: Triplex 4,900 mm | Free Lift: 1,380 mm • Fork Positioner: 1,380 mm | Forks: 1,050 mm | Side Shift: ✔️ • Full Cabin 🚜 | Superelastic Tyres 100% 🛞 • Condition: Excellent – after major service | Refurbished & corrosion-free 📏 H: 2,250 mm | L: 1,550 mm | W: 1,500 mm | Positioner: 1,380 mm 💪 WHY FT LOGISTICS ✅ 10+ years of experience ✅ Full technical inspection – filters, oils, hydraulics replaced ✅ Own paint & service workshop – top finish ✅ Transport across Europe 🚛 ✅ Operator training & testing on delivery ✅ Financing | Invoice in EUR or PLN ✅ Reliable after-sales support Kdsdpfoy Tqh Sjx Aktel 🏭 Ideal for: Warehouses • Timber • Steel • Pipe industries • Long-load handling FT LOGISTICS – Reliable machines, proven quality, ready for work! 💯

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, operating hours: 9,379 h, load capacity: 4,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,800 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,100 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4000 – 2009 | 9379 HOURS | LPG | DUPLEX 4100 mm | SIDESHIFT | FREE LIFT 🚜 Ready to work from day one – no investment, no risk 🚀 --- Why choose this forklift? 🤔 Are you looking for a machine that won’t disrupt your operations? ⏱️ This COMBILIFT C4000 is a proven unit that has undergone a full service – simply get in and start working. No hidden costs. 💼 ✔ Fully serviced (fluids, filters, comprehensive inspection of all components) 🔧 ✔ Technical and cosmetic condition: like new ✨ ✔ Only 9379 operating hours – genuinely low mileage 📊 ✔ New tyres – no further investment required 🛞 --- Key Specifications ⚙️ - Capacity: 4000 kg ⚖️ - Power: LPG ⛽ - Mast: Duplex – 4100 mm 📏 - Fork positioner: 1100 mm ↔️ - Fork length: 1200 mm - Cabin: Fully enclosed / heated 🔥 --- Full Technical Specification 📋 General: - Year of manufacture: 2009 📅 - Operating hours: 9379 - Capacity: 4000 kg - Load center: 600 mm - Truck weight: 6100 kg Mast & Lifting: - Mast type: Duplex - Lift height: 4100 mm Forks & Attachments: - Fork positioner: 1100 mm - Forks: 1200 mm Dimensions: - Height: 2400 mm - Length: 2400 mm - Width: 2250 mm - Overall height: 2800 mm Chassis: - Tyres: superelastic (100%) – brand new 🛞 - Front: 200/50-10 - Rear: 27x10-12 Equipment: - Fully heated cabin 🔥 - Sideshift ↔️ - Free lift Condition: - Technical: 5/5 – post full service ✅ - Visual: refurbished, like new, rust-free ✨ --- Ideal for 🏭 ✔ Narrow aisle warehouses 📦 ✔ Timber, steel and pipe industries 🪵 ✔ Handling long loads 📏 ✔ Both indoor and outdoor use 🌦️ --- What you get – customer value highlights 💼 You’re not just buying a “used forklift”. You’re investing in a fully prepared, ready-to-work machine: ✔ Every unit is fully inspected prior to sale 🔍 ✔ Ready for immediate deployment 🚀 ✔ Live online demonstration available 💻 ✔ Direct delivery to your facility 🚛 --- Delivery & Support 🌍 - Europe-wide transport - Full logistics support - Assistance with leasing/financing 💰 - After-sales support 🤝 --- Why FT LOGISTICS? 💪 We deliver forklifts that work – not equipment that sits in the shop. ✔ Over 100 machines in stock 📊 ✔ In-house servicing and prep 🔧 Kjdpfx Akoy Tqhxetedl ✔ European market expertise 🌍 ✔ Hundreds of satisfied clients ⭐ --- Contact us today 📞 FT LOGISTICS – Quality you stand behind. Service you can trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,992 h, load capacity: 4,000 kg, lifting height: 5,550 mm, free lift: 1,750 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,600 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 28X12,5-15, overall weight: 10,400 kg, empty load weight: 6,400 kg, total height: 2,550 mm, total length: 2,350 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4000S – 2018 | 5992 HOURS | LPG | TRIPLEX 5550 mm | FORK POSITIONER | FULL FREE LIFT ✅ Ready to work from day one – no additional investment, no risk. Are you looking for a machine that will keep your operation running without unexpected downtime? This COMBILIFT C4000S is a fully serviced and thoroughly inspected forklift, ready for immediate operation. No hidden costs and no surprises. 🔧 The machine has undergone a major full service, including replacement of oils and filters, as well as inspection of all components. It is in excellent technical and visual condition – like new. With only 5992 operating hours, the forklift has seen genuinely low usage. It is also equipped with brand-new tyres, meaning no additional investment is required. 📋 Technical specifications: • Capacity: 4000 kg • Engine type: LPG / GAS • Mast type: TRIPLEX • Lifting height: 5550 mm • Free lift: 1750 mm • Fork positioner: 1360 mm • Fork length: 1200 mm • Fully enclosed and heated cabin • Operating hours: 5992 • Load centre: 600 mm • Truck weight: 6400 kg • Overall closed height: 2600 mm • Height: 2550 mm • Length: 2400 mm • Width: 2250 mm • Super elastic tyres (100% new) • Front tyres: 200/50-10 • Rear tyres: 28x12.5-15 🏭 The forklift is ideal for warehouses with narrow aisles, timber, steel and pipe industries, transportation of long loads, and both indoor and outdoor operation. ✅ You are not buying a “used forklift”. You are buying a fully prepared, tested and work-ready machine. Every forklift undergoes comprehensive testing before sale and is ready for immediate implementation. 🎥 We can also arrange a live online presentation of the machine and organize delivery directly to your company. Kedpey Tqhfsfx Aktedl 🚛 We provide transport throughout Europe, complete logistics support, assistance with leasing and financing, as well as after-sales service and technical support. 🏆 FT LOGISTICS delivers forklifts that work – not machines that spend time in service workshops. We currently offer over 100 machines, provide in-house servicing and equipment preparation, and have experience supplying customers throughout Europe with hundreds of satisfied clients. 📞 Contact us today. FT LOGISTICS – Quality You Can Rely On. Service You Can Trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 3,087 h, load capacity: 3,000 kg, lifting height: 3,200 mm, free lift: 1,600 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,550 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,320 mm, fork length: 920 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, 🚜 Looking for a reliable forklift? We're industry specialists! 💪 We specialize in selling high-quality forklifts, offering reliable machines in excellent condition. Check out our offer and find the perfect equipment for your business! 🔧🔍 📌 Featured in this listing: COMBILIFT C3000XL – LARGE CABIN – DUPLEX 3200mm – Year 2015 – LPG – FREE LIFT – SIDESHIFT – CONDITION 5/5 ⭐⭐⭐⭐⭐ This forklift is in excellent technical condition, ready for immediate use ✅ 🔧 Key Features & Technical Specifications: Model: COMBILIFT C3000XL Year of production: 11/2015 Lifting capacity: 3000 kg Mast type: Duplex Lift height: 3200 mm Drive type: LPG Load center: 600 mm Engine manufacturer: G.M. Power: 74 HP Total weight: 6800 kg Free lift: 1600 mm Tires: Solid, Superelastic, in good condition Front tires: Superelastic - 23x10-12 - 100% TREAD Rear tire: Superelastic - 355x65-15 - 100% TREAD Total height (mast collapsed): 2550 mm Technical condition: Reliable, after full service inspection Visual condition: Very good Fork length: 920 mm Total length: 2100 mm Overall width: 2250 mm Kjdey Tqgzspfx Aktedl Fork positioner width: 1320 mm 🧰 Equipment: Lightning 💡 Adjustable boom Pallet forks Enlarged XL cabin Freelift Sideshift 🏗️ Ideal For: This forklift is a perfect solution for industries requiring efficient handling of long loads in tight spaces, such as the wood, steel, or pipe industries. Thanks to the multi-directional movement, it ensures easy maneuvering and optimal use of warehouse space. 🔄 Additional Features: Integrated multi-directional steering system 🔄 Comfortable operator cabin High reliability for intensive use Suitable for indoor and outdoor operation 🌦️🏢 🛠️ Condition: Fully operational machine, regularly serviced, ready to work immediately. 🚚 We offer forklift delivery across Europe and a FREE initial inspection! 💬 Contact us to arrange a viewing! 💰 Price & Financing Options: We offer full financing support, including fast leasing and credit decisions – even for new businesses or those with financial difficulties! Leasing decision in just 2 hours! Invoicing available in EUR or PLN Leasing & Start-Up programs available Authorized supplier for most leasing companies ✅ FAST / SIMPLE / AFFORDABLE FINANCING

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,446 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,500 mm, load center: 400 mm, fuel type: gas, mast type: triplex, construction height: 2,350 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 800 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: superelastic tires (black), rear tire size: 23 X 10 - 12, overall weight: 7,200 kg, empty load weight: 4,700 kg, total height: 2,350 mm, total length: 1,900 mm, total width: 1,950 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🔧 Years of Experience | 🛠 In-house Service & Paint Facility | 💼 Professional Consultation | 🚚 Own Transport Fleet | 🤝 After-Sales Support Kdodpsy Tqgnsfx Aktjl Are you seeking a forklift you can rely on? We are a reputable dealer of new and used forklifts, backed by many years of experience and tradition. We serve clients across Europe – from small enterprises to major international industrial sites. Our forklifts are not just machines – they are your assurance of smooth and dependable logistics. 🌟 Why choose us? ✅ Each forklift undergoes a thorough technical overhaul (inspection, testing, oil and filter replacement, refurbishment of key components) ✅ Optional full safety certification (UDT) upon request ✅ In-house paint shop and service workshop – forklifts finished to the highest technical and visual standards ✅ Europe-wide transport, handled by our own fleet and trained drivers ✅ Operator training upon delivery + full onsite functionality check at your location ✅ After-sales and technical support – we stand by our customers post-sale ✅ On-site viewing and testing of machines – you are always welcome! ✅ Hundreds of satisfied clients across Europe – join those who already trust us ✅ Financing available – we work with leading leasing companies ✅ Invoice available in EUR or PLN – at your preference 🚀 Currently available: COMBILIFT C2500 – 4-Way Compact Forklift ✅ Year of manufacture: 2012 ✅ Operating hours: 2,446 ✅ Fuel: LPG ✅ Lifting capacity: 2,500 kg ✅ Mast: Triplex – 4,900 mm ✅ Fork positioner 1200 mm | Telescopic forks 800 mm ✅ Superelastic tyres – 100% condition ✅ Technical condition: Excellent – fully serviced ✅ Visual condition: Clean, rust-free, ready to work ✅ Free lift: 1,500 mm 📐 Dimensions: Height: 2,350 mm Overall length: 1,900 mm Width: 1,950 mm Positioner width: 1,200 mm Overall height: 2,350 mm 🏭 Ideal for: Narrow aisle warehouses Wood, steel, and pipe industries Handling long loads Indoor and outdoor use ✨ FT Logistics – Quality you can rely on. Service you can trust.