Used Müller Exp 80 Rf/Hk for sale (21,813)

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Kdjdpfx Afey S Ru Aovsl Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, mileage: 151,394 km, power: 246 kW (334.47 HP), first registration: 04/2008, fuel type: diesel, empty load weight: 11,500 kg, maximum load weight: 6,500 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,900 mm, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro4, number of seats: 2, operating hours: 5,691 h, Equipment: ABS, air conditioning, cabin, compressed air brake, crane, differential lock, immobilizer system, onboard computer, parking heater, seat heater, * German vehicle * Single owner * Complete documentation available * Condition – see photos * Only 5,691 original operating hours * Previously owned by a municipal authority * Müller Jetmaster F75V * Includes remote control * 7,500-liter water tank * High-pressure flushing vehicle for sewer and pipe cleaning Kedpoylcgijfx Afvsdl * Versatile applications * Pipe cleaning up to DN 150 * Sewer cleaning up to DN 800 * Large-profile cleaning above DN 800 * Landfill and culvert cleaning * Industrial cleaning * Special applications * High-pressure three-plunger pump Uraca P 3-45/65 * Up to 340 liters per minute * 140 bar working pressure * 87 kW * 552 Nm torque * Fully equipped electric hose reel with DN 25, telescopic/extensible * Electric hose reel fully equipped with DN 19 high pressure hose * Additionally, small reel with DN 19 for high-pressure lance * Müller swing crane with cable winch * 1,000 kg lifting capacity * Various storage compartments * Work lights * Rotating beacons * Mounted on MAN TGA chassis * Long comfort cab with air conditioning * Auxiliary heater * Refrigerator * 2 air-suspended comfort seats, each with seat heating * 8-speed manual transmission * Reversing camera * Electric windows * Electrically heated mirrors * Cruise control * Electric engine brake * Stereo CD * Roof hatch * Leaf/air suspension with raising/lowering function * Wheelbase 3.90 m * Permissible total weight: 18,000 kg * Unladen weight: 11,500 kg * Payload: 7,500 kg If you require a new TÜV inspection, we would be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods to avoid any misunderstandings regarding the condition and suitability for the buyer. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect details in the offer. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Changes, prior sale, and errors excepted.

Condition: used, mileage: 95,000 km, power: 152 kW (206.66 HP), first registration: 10/2019, fuel type: diesel, overall weight: 7,490 kg, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,200 mm, loading space width: 2,450 mm, loading space height: 1,970 mm, Equipment: ABS, air conditioning, tail-lift, We are very pleased that our offer has attracted your interest and we can already assure you that you will be purchasing a good-value vehicle with a traceable service history from our company! Certified KIKO sliding curtain body with rear load securing Tail lift 1,500 KG Towing hitch (drawbar eye) Towing hitch (ball coupling) Rear axle with air suspension Air conditioning Kdjdjxz Nibspfx Afvsl 3-seater cab Reversing camera GERMAN VEHICLE REGISTRATION / EXPORT SERVICE We organize your vehicle registration and export documents / EUR 1 certificate and manufacturer's declaration for export. FINANCING Upon request, we are happy to provide you with a leasing, hire-purchase, or financing offer. SERVICE General inspection (TÜV), UVV tail lift inspection, LGS test, tachograph testing, installation of OBU device and servicing by our authorized brand workshop available on site. TOLL / ROAD FEES Toll registration can be arranged on site. TRAVEL / DISTANCES Wittlich train station – 500 m away Frankfurt Airport – 150 km away Frankfurt-Hahn Airport – 40 km away Luxembourg Airport – 75 km away Sale according to our terms and conditions. The information provided online is a non-binding description and does not represent guaranteed characteristics. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Year of construction: 2014, condition: used, Number of sanding units 6 St. sanding width 180 mm Sanding height max. 150 mm STAEHLE Grinding Machine Type Gloria/Saturn E 180 RF ----- Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria) with 2 grinding units, plus top and bottom Roto Finish grinding attachments. 1 upper grinding belt 1 lower grinding belt 2 upper Roto Finish grinding attachments Kdodsx Dng Dspfx Afvjl 2 lower Roto Finish grinding attachments For a detailed description, please see the accompanying PDF from the manufacturer. Sold on behalf of a customer. The images are from our archive and were taken before the machine was delivered to the customer. (Technical specifications according to the manufacturer - without guarantee!)

Condition: new, maximum load weight: 1,885 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 3,040 mm, loading space width: 1,510 mm, loading space height: 1,800 mm, total width: 2,026 mm, total height: 2,460 mm, Year of construction: 2026, Humbaur Box Trailer HK 253015-18P FlexZurr with Overrun Ramp in White Instead of Rear Door, Max. Load 300 kg, with Tapered Ramp Edge. Description: Our tandem axle trailer is engineered for maximum stability: hot-dip galvanized steel chassis, plastic door seals, heavy-duty roof and front wall reinforcements – this trailer is built for long-lasting use. The integrated load securing system guarantees safe transport of your cargo. An interior light ensures sufficient illumination inside. In short, your goods arrive reliably and undamaged. Technical Data: Trailer Type: Tandem Axle Construction: Plywood Door Opening Dimensions: 1400 x 1750 mm Unladen Weight: 615 kg Gross Weight: 2500 kg Payload: 1885 kg Internal Length: 3,040 mm Overall Length: 4,525 mm Internal Width: 1,510 mm Overall Width: 2,026 mm Internal Height: 1,800 mm Overall Height: 2,460 mm Loading Height: 565 mm Tires: 15 inch Equipment: V-drawbar, hot-dip galvanized by immersion 13-pin connector 15 mm reinforced floor panel Side walls and roof made of 15 mm multi-layer plywood with UV-resistant synthetic coating Interior light installed Tie-down rings integrated into frame profile, lashing capacity 400 kg per ring (Dekra certified) Fully automatic jockey wheel Kdedpfx Afey Ng Utsvjl Humbaur multifunction rear lights with reversing light All our prices include handover preparation, 19% VAT, and registration documents.

Condition: used, Year of construction: 1966, This machine is an E. Bickel Perforation HK 3-61, manufactured in 1966, with the serial number 8716. It is designed to handle a size of 610 mm and is currently in stock in Germany. The price is available upon request. Kedpfx Aew Emuxsfvjdl The machine is in good condition without any damages. It is suitable for use in perforating or grooving work. Format: 610 mm Equipment: Good condition without any damage For use in perforating or grooving work

Condition: used, Year of construction: 1981, Format: 680 mm Equipment: with 1x perforating tools with 1x creasing tools perforating machine with electric motor Kjdpfey Dufcex Afvedl

Condition: new, maximum load weight: 890 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,515 mm, loading space width: 1,320 mm, loading space height: 1,527 mm, total width: 1,806 mm, total height: 2,125 mm, Year of construction: 2026, Humbaur Box Trailer HK 132513-15P FlexZurr with rear drive-over ramp in white instead of door, max. load 300 kg, with drive-over tip. Technical specifications: Ksdpfsy Iq Ubjx Afvjdl Trailer type: Single axle Construction: Plywood Unladen weight: 410 kg Gross weight: 1300 kg Payload: 890 kg Internal length: 2,515 mm Total length: 3,821 mm Internal width: 1,320 mm Total width: 1,806 mm Internal height: 1,527 mm Total height: 2,125 mm Loading height: 535 mm Ramp angle approx. 21° Tyres: 14 inch Equipment: V-drawbar, hot-dip galvanized in immersion bath * 13-pin plug * 15 mm strong flooring * Side walls and roof made of 15 mm multi-layered plywood with UV-resistant plastic coating (GRP top layer on models 5290.002 & 5291.002) * Interior light installed * Galvanized rotary rod lock and hinges * 6 lashing rings, flexibly adjustable in the frame profile, lashing capacity 400 kg per ring, Dekra certified * Jockey wheel Description: Our single-axle trailer is constructed for maximum stability: hot-dip galvanized steel chassis, plastic door seals, reinforced roof and front wall - this trailer is built for longevity. The integrated lashing system secures your load inside. An interior light ensures adequate illumination. This keeps your goods reliably and safely protected during transport. Our prices include delivery, 19% VAT, and vehicle documents.

Condition: new, Year of construction: 2026, saw blade diameter: 285 mm, cutting height (max.): 80 mm, cutting range round steel at 90°: 80 mm, saw blade speed: 200 rpm, cutting range square steel at 90°: 50 mm, cutting diameter: 80 mm, rotational speed (min.): 200 rpm, rotational speed (max.): 200 rpm, Equipment: rotational speed infinitely variable, Fully Automatic High-Speed Circular Sawing Machine – CHK-80 Circular sawing machines are industrial cutting devices used for high-precision and rapid cutting of pipes, profiles, and solid metal materials. They are particularly favored in mass production lines to achieve fast, repeatable, and clean cuts. The CRONOSSTECH CHK Series Fully Automatic High-Speed Circular Sawing Machines deliver high production efficiency through their robust mechanical structure and advanced automation system. Thanks to the PLC-controlled automation system and touch operator panel, cutting parameters can be easily configured, enabling high-precision batch cutting operations. Featuring a spheroidal cast iron machine body, a powerful transmission system, and servo feed technology, the machine operates vibration-free and prolongs tool life. CHK Series machines are engineered for the rapid and precise cutting of pipes, profiles, and solid materials. Key Advantages • Fully automatic cutting operation • High-speed circular saw cutting technology • Servo-driven feed system • PLC-controlled automation system • Superior cutting precision and stability • Heavy-duty industrial machine construction Typical Applications • Steel service centers • Metal processing plants • Pipe and profile manufacturers • Machinery manufacturing industry • Automotive and sub-industry sectors Standard Features • Precision cutting and smooth surface quality • Special gearbox design • Automatic lubrication system Kjdpfxoyq N Hmo Afvodl • Centralized lubrication system • Adjustable vice pressure system • Servo-driven feed system • Automatic loading system • Pallet conveyor system • Electromagnetic braking system • Scrap separation system • Diameter control system • Hydraulic motor-driven chip removal brush • Air pressure control system • Easy operation with PLC control unit • Torque control system that extends blade life • Easy adjustment of vice pressure based on material type Technical Specifications – CHK-80 Cutting Capacity (Round): Ø10 – 80 mm Cutting Capacity (Square): Max 50 × 50 mm Cutting Capacity (Rectangular): Max 70 × 50 mm Main Motor Power: 7.5 kW Hydraulic Motor Power: 3 kW Material Feed Motor Power: 2.2 kW Circular Saw Blade Size: Ø285 × 1.7 × 2 mm Blade Speed Range: 20 – 200 rpm Single Feed Length: 750 mm Bundle Feed Length: 3,000 mm Remnant Length: 60 – 70 mm Machine Weight: 3,050 kg

Condition: new, Year of construction: 2025, pressing force: 80 t, stroke length: 500 mm, table width: 700 mm, table length: 700 mm, clearance between the columns: 700 mm, retraction force: 30 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 80/30 Ton Four-Column Hydraulic Deep Drawing Press Kedpfxjx N Ults Afvsdl General Description The CRONOSSTECH 80/30 ton four-column hydraulic deep drawing press is an industrial press solution designed for high-precision metal forming, deep drawing, and die testing applications. It features a rigid four-column body structure for superior accuracy and repeatability. The St52-grade steel frame is subjected to stress relief via vibration, ensuring excellent parallelism and perpendicularity tolerances are maintained during pressing operations. The ram and die cushion systems operate independently; stroke and pressure adjustments can be precisely controlled via the operator panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-based control, this press ensures long-lasting, safe, and energy-efficient performance. Maintenance requirements are minimized thanks to the automatic lubrication system and filter contamination alerts. This model is ideal for small- and medium-scale serial production, die trials, and precision forming processes. Key Advantages - Rigid four-column press body design - Independent stroke and tonnage settings for ram and die cushion - Full control via touchscreen panel - High repeatability and precision - Low maintenance cost, long service life Areas of Application - Metal forming operations - Deep drawing processes - Die trial and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column BODY MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction hardened, chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 80 Tons CAPACITY (DIE CUSHION): 30 Tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 500 mm STROKE (DIE CUSHION): 150 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 600 mm WELDING STRESS RELIEF: By vibration WELDING PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 11 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DOWN SPEED: 150 mm/sec MOVABLE TABLE DRAWING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec DIE CUSHION FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 200 mm – Ck45 DIE CUSHION CYLINDER BORE: Ø 125 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3300 mm APPROXIMATE PRESS WIDTH: 1050 mm APPROXIMATE PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1100 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION SYSTEM: Automatic (Adjustable from HMI) RAM / DIE CUSHION STROKE AND TONNAGE ADJUSTMENT: Adjustable from HMI SYSTEM & PRESS STATUS DISPLAY: Viewable on HMI DIE MEMORY: Adjustable from HMI LINEAR POSITION TRANSDUCER: NOVATECHNIK or TURCK PLC: DELTA TOUCH PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5.5 Tons

Condition: new, Year of construction: 2025, pressing force: 250 t, stroke length: 800 mm, table width: 1,000 mm, table length: 1,000 mm, clearance between the columns: 1,000 mm, retraction force: 80 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 250 / 80 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 250 / 80 ton four-column hydraulic drawing press is a high-rigidity hydraulic solution designed for precision metal forming, deep drawing, and press applications. The frame is constructed of St52 grade steel and undergoes stress relief through vibration, ensuring high parallelism and perpendicularity tolerances during long-term operation. The ram and cushion systems operate independently; stroke and pressure settings can be precisely adjusted via the touch panel. Kodpfx Afex N Um Revedl With hydraulic components from REXROTH or PARKER, an IE3 efficiency-class motor, and PLC-controlled system, it offers high performance and reliable operation. An automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With its 250 / 80 ton forming capacity, this model is an ideal industrial press solution for medium- and heavy-duty metal forming, deep drawing, and die applications. Key Advantages - Four-column, high-rigidity press frame - Independent stroke and tonnage settings for the ram and cushion - Full control via touch panel - High precision and repeatability - Long service life with low maintenance costs Areas of Use - Metal forming applications - Deep drawing operations - Die testing and production lines - Auxiliary pressing processes ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs. induction hardened chrome-plated shafts SLIDE GUIDING: Bronze Zr14 CAPACITY (RAM): 250 Ton CAPACITY (CUSHION): 80 Ton DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. OPENING HEIGHT: 100 mm MAX. OPENING HEIGHT: 900 mm STRESS RELIEVING: Vibration stress relief WELDING APPLICATION: WPQR & WPS accredited by TÜRK-AK – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 22 kW – IE3 class MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT: 150 mm/sec FORMING SPEED: 12 mm/sec RETURN SPEED: 170 mm/sec CUSHION TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 360 mm – Ck45 CUSHION CYLINDER BORE: Ø 200 mm – Ck45 AUXILIARY BOOST CYLINDERS: 2 units APPROXIMATE PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm FRONT CHARGING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 16 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condition: used, Year of construction: 1989, Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Ksdsy Hqz Sepfx Afvedl Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Condition: excellent (used), mileage: 659,000 km, power: 315 kW (428.28 HP), first registration: 05/2003, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 4,190 mm, fuel: diesel, fuel tank capacity: 430 l, brakes: retarder, color: orange, driver cabin: day cab, gearing type: semi-automatic, number of gears: 16, emission class: euro3, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space volume: 16 m³, Year of construction: 2003, Equipment: ABS, air conditioning, cruise control, differential lock, electric window regulation, power mirror, retarder, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - 8,000 kg Front Axle - 430 Liter Diesel Tank - Aluminum Fuel Tank - Heated Mirrors - Comfort Driver's Seat - Differential Lock - Differential Lock - EPS with Clutch - High Beam - Speed Limiter - Battery Master Switch - Hydraulic System - Lift Axle - Radio/CD Player - Beacon Lights - Sun Visor - Toolbox - PTO (Power Take-Off) - PTO (Power Take-Off) - ZF Intarder - Towing Hitch = Notes = GOOD CONDITION MERCEDES-BENZ ACTROS 2543L V6 6x2 CHASSIS WITH MULLER F155 EGH VACUUM TANK & RETARDER!! 430HP, V6 ENGINE!! EPS WITH CLUTCH (3 PEDALS)!! RETARDER!! ADR/VLG (FL - AT)!! LIFT AXLE!! P.T.O.!! ETC.!! MULLER F155 EGH VACUUM TANK!! HYDRAULIC SNAKE ARM!! HIGH PRESSURE WATER PUMP!! ETC.!! TRUCK IS IN GOOD WORKING AND DRIVING CONDITION, READY FOR THE JOB!! MORE MERCEDES-BENZ 4x2 / 4x4 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS AVAILABLE IN STOCK!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of Cylinders: 6 Engine Displacement: 11,946 cc Transmission Transmission: EPS WITH CLUTCH (3 PEDALS), 16-speed, Semi-automatic Transmission Axle Configuration Brakes: Disc Brakes Front Axle: Tire Size: 385/65R22.5; Max. Axle Load: 8,000 kg; Steering; Left Tire Tread: 50%; Right Tire Tread: 50%; Suspension: Leaf Spring Rear Axle 1: Tire Size: 315/80R22.5; Twin Tires; Differential Lock; Max. Axle Load: 11,500 kg; Inner Left Tire Tread: 20%; Outer Left Tire Tread: 20%; Inner Right Tire Tread: 20%; Outer Right Tire Tread: 20%; Reduction: Single Reduction; Suspension: Air Suspension Rear Axle 2: Tire Size: 315/80R22.5; Lift Axle; Max. Axle Load: 7,500 kg; Left Tire Tread: 30%; Right Tire Tread: 30%; Suspension: Air Suspension Weights Unladen Weight: 16,540 kg Payload: 9,460 kg gross Vehicle Weight: 26,000 kg Functional Body Make: MULLER F155 EGH VACUUM TANK Kdjdpfsytxu Ssx Afvjl Condition Technical Condition: Very Good Visual Condition: Very Good Further Information Please contact Sales Department or Erik Engel for further details.

Year of construction: 2016, condition: used, Transnorm roller conveyor ejector GF 4510-1120-1000 RA1854 Make: Transnorm Roller width (RB): 1030 mm, Steel rolls Nominal/outer width (NB): 1050 mm Rolls diameter: 50 mm length: 3715mm Overall height frame: 250 Kdsdpfjk Abhhsx Afvsl ejector angle: 30° in both sides 7 rows ejector individually controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: with supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: like new (used), Year of construction: 2017, machine/vehicle number: HMD-G-80-1000, I have a nearly new, immediately available Abel piston diaphragm pump for sale, type HMD-G-80-1000, cast iron construction, manufactured in 2017, recently completely overhauled and repainted, maximum flow rate 70 m³/h, maximum pressure 15 bar, 30 kW engine, complete with new control cabinet, frequency converter, and pressure sensor. Ideally suited for long 1200 or 1500 mm chamber filter presses. Located in 58762 Altena, Germany. Just set it up, plug it in, and let it run… Kodpfx Asyxxmgjfvsdl

Condition: used, Standard equipment Kedpfx Aebncx Asfvjdl

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8151, rotary table diameter: 800 mm, grinding height: 750 mm, workpiece weight (max.): 800 kg, total height: 4,100 mm, total width: 26,650 mm, total length: 44,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 550 mm, overall weight: 13,000 kg, grinding wheel diameter: 400 mm, disc diameter: 400 mm, grinding spindle speed: 1,460 rpm, grinding diameter: 800 mm, control cabinet width: 650 mm, type of input current: DC, control cabinet height: 1,900 mm, control cabinet length: 1,800 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,460 rpm, table load: 900 kg, workpiece diameter (max.): 850 mm, grinding wheel width: 60 mm, table width: 1,240 mm, power: 35 kW (47.59 HP), rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 2 m/min, space requirement height: 4,100 mm, space requirement length: 5,100 mm, space requirement width: 2,655 mm, Good day, For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding. The machine has a swivel stand with 3 different sanding heads for the respective area of application. Complete machine documentation is available and can be presented upon inspection. The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced: - 3x New weight compensation cylinders - 1x new hydraulic unit (complete) - New guideway covers - Revised rotary table group Technical data Machine length: 4.400mm Machine width: 2,655mm Machine height: 4.100mm Machine weight: 13.000Kg Control cabinet width: 650mm Control cabinet height: 1.900mm Control cabinet length: 1.800mm Grinding table diameter: 800mm Grinding table load capacity: 800kg Grinding table drive power: 0.21 - 14.5KW Grinding table speed: 100 1/min (both directions) Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots Z-axis travel (grinding table): 550mm Maximum grinding height (Y): 750mm Lubrication pump Masch. Bed: 0,18KW Lubrication pump Masch. Column: 0,1KW Leak oil pump: 0,065KW Hydraulic pump: 1.5KW 1) External round grinding head Spindle drive power: 11KW Spindle speed: 1,450 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Kdedpjrntirsfx Afvol Feed speed (Y): 100 mm/min 2) Internal round grinding head Spindle drive power: 5.5KW Grinding wheel: Variable Feed speed (Y): 100 mm/min 3) Flat-round sanding head Spindle drive power: 11KW Spindle speed: 1,800 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min Viewing appointments possible at short notice by arrangement !!! With kind regards R.Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

Condition: new, pressure 8,0 kN stroke 40 mm throat 90 mm Working height from to 50 - 200 mm table surface area 120 x 160 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x410 mm Knee lever hand press with fine height adjustment SPECIAL PRICE!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring Kodpfx Afjfv Avksvsdl

Condition: good (used), The machine has been overhauled many new parts new cables new hydraulic station The machine has been checked, is functional, Kdedpfsv Ihdzsx Afvel We can send a video.

Condition: new, empty load weight: 514 kg, maximum load weight: 786 kg, overall weight: 1,300 kg, loading space length: 3,040 mm, loading space width: 1,510 mm, loading space height: 1,800 mm, loading space volume: 8.1 m³, color: white, construction height: 2,450 mm, working width: 2,010 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, unbraked, rear door can also be opened/locked from the inside incl. door handle with plywood superstructure 15mm roof/walls, braked, 6 lashing eyes, * IMMEDIATELY AVAILABLE * Rear door can also be opened/locked from the inside incl. door handle with plywood superstructure 15mm roof/walls, braked, 6 lashing eyes Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1300kg - Unladen weight: 514 kg - Payload: 786 kg - Interior dimensions: 304 x 151 x 180 cm (L x W x H) - Overall exterior dimensions: 435 x 201 x 245 cm (L x W x H) - Loading sill height: 59 cm - Tires: 195/65R15 steel rim - Brake: yes - Support wheel: yes - 100km/h: at extra charge - incl. vehicle documents Vehicle body: - Floor: Wood, screen-printed board 15mm - Walls: 15mm multi-layer wood, plastic-coated - Roof material: 15mm multi-layer wood, plastic-coated - Chassis: ALKO rubber spring axle - Number of lashing eyes: 6 pieces (400kg/daN) - Rear door: yes, double-leaf - Tailgate: no - Tailgate material: - - Tailgate/door function: espagnolette lock - Clearance dimensions tailgate/flap: 140x175cm - Interior light: yes, with switch - Supports: at an extra charge - Overrun equipment & brakes: yes - 100km/h: incl. vehicle documents Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - stable V-drawbar, hot-dip galvanized - ALKO overrun device - 15 mm thick base plate - side walls and roof made of multi-layer wood, 15 mm thick, with UV-resistant plastic coating - interior light mounted - 2-leaf rear doors - doors with special sealing profiles, made of hard/soft plastic - lashing rings in the frame profile, tensile force 400 kg per lashing ring, Dekra tested - jockey wheel - automatic reversing system - plastic mudguards - 13-pin plug - reversing light - large rear lights - rear lighting - COC approval: yes. plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: ZBII & COC papers SPECIAL CONSTRUCTION: - Rear door can be opened from the inside and outside and is lockable! - Door handle at the rear with 3-point lock Accessories can be retrofitted - please enquire: - Anti-theft device - Rear supports - 100km/H approval with wheel bumper - Side door - Motorcycle rockers, - Motorcycle stand rails, - Motorcycle lashing straps, - Lashing straps - Additional lashing eyes - Slot-hole rails for tension belts & locking beams - Rod strip with rubber coating for tension belts & locking beams - Steel or aluminum locking beams - Interior lights - Reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Kdodju Htidopfx Afvsl

Condition: new, empty load weight: 615 kg, maximum load weight: 1,885 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 3,040 mm, loading space width: 1,510 mm, loading space height: 1,800 mm, loading space volume: 8.1 m³, color: white, construction height: 2,460 mm, working width: 2,030 mm, Hydraulics, automatic reverse, hot-dip galvanized, unbraked, tandem with plywood body 15mm roof/walls, braked, 6 lashing eyes, * IMMEDIATELY AVAILABLE * Tandem with plywood body 15mm roof/walls, braked, 6 lashing eyes Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2500kg - Unladen weight: 615 kg - Payload: 1885 kg - Interior dimensions: 304 x 151 x 180 cm (L x W x H) - Overall exterior dimensions: 453 x 203 x 246 cm (L x W x H) - Loading sill height: 57 cm - Tires: 195/65R15 steel rim - Brake: yes - Support wheel: yes - 100km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - Floor: Wood, screen-printed board 15mm - Walls: 15mm plywood, plastic-coated - Roof material: 15mm plywood, plastic-coated - Chassis: ALKO rubber spring axle - Number of lashing eyes: 6 pieces (400kg/daN) - Rear door: yes, double-leaf - Tailgate: no - Tailgate material: - - Tailgate/door function: espagnolette lock - Clearance dimensions tailgate/flap: 140x175cm - Interior light: yes, with switch - Supports: at an extra charge - Overrun device & brakes: yes - 100km/h: incl. vehicle documents Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - stable V-drawbar, hot-dip galvanized - tandem axle - overrun device from ALKO - floor plate 15 mm thick - side walls and roof made of multi-layer wood, 15 mm thick, with UV-resistant plastic coating - interior light mounted - 2-leaf rear doors - doors with special sealing profiles, made of hard/soft plastic - galvanized espagnolette lock and hinges - lashing rings in the frame profile, tensile force 400 kg per lashing ring, Dekra tested - jockey wheel - automatic reverse drive - plastic mudguards - 13-pin plug - reversing light - large rear lights - 13-pin plug - COC approval: yes. plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: ZBII & COC papers Accessories can be retrofitted - please enquire: - anti-theft device - rear supports - 100km/H approval with wheel bumper - side door - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slot-and-hole rails for tensioning straps & locking bars - bar strip with rubber coating for tensioning straps & locking bars - steel or aluminum locking bars - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Kdsdeu Htiqspfx Afvol

Condition: new, empty load weight: 630 kg, maximum load weight: 1,870 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 3,040 mm, loading space width: 1,510 mm, loading space height: 1,800 mm, loading space volume: 8.1 m³, color: white, construction height: 2,460 mm, working width: 2,030 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, unbraked, with drive-on flap, plywood superstructure 15 mm roof/walls, braked, 6 lashing eyes, * IMMEDIATELY AVAILABLE * with drive-on flap, plywood superstructure 15 mm roof/walls, braked, 6 lashing eyes Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,500 kg - Unladen weight: 630 kg - Payload: 1,870 kg - Interior dimensions: 304 x 151 x 180 cm (L x W x H) - Overall exterior dimensions: 453 x 203 x 246 cm (L x W x H) - Loading sill height: 57 cm - Tires: 195/65R15 steel rim - Brake: yes - Support wheel: yes - 100km/h: at extra charge - Incl. vehicle documents Vehicle body: - Floor: Wood, screen-printed board 15mm - Walls: 15mm plywood, plastic-coated - Roof material: 15mm plywood, plastic-coated - Chassis: ALKO rubber spring axle - Number of lashing eyes: 6 pieces (400kg/daN) - Tailgate: No - Tailgate: Yes - Tailgate material: Plywood - Tailgate/door function: espagnolette lock - Clearance dimensions tailgate/flap: 140x175cm - Interior light: Yes, with switch - Supports: at an extra charge - Overrun device & brakes: Yes - 100km/h: incl. vehicle documents Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - stable V-drawbar, hot-dip galvanized - tandem axle - overrun device from ALKO - floor plate 15 mm thick - side walls and roof made of multi-layer wood, 15 mm thick, with UV-resistant plastic coating - interior light mounted - 2-leaf rear doors - doors with special sealing profiles, made of hard/soft plastic - galvanized espagnolette lock and hinges - lashing rings in the frame profile, tensile force 400 kg per lashing ring, Dekra tested - jockey wheel - automatic reversing system - plastic mudguards - 13-pin plug - reversing light - large rear lights - 13-pin plug - COC approval. plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: ZBII & COC papers Special equipment included in the price: - White drive-over wall instead of rear door, with drive-over point Accessories can be retrofitted - please enquire: - Anti-theft device - Rear supports - 100km/H approval with wheel bumper - Side door - Motorcycle rocker panels - Motorcycle stand rails - Motorcycle lashing straps - Lashing straps - Additional lashing eyes - Slot-and-hole rails for tensioning straps & locking bars - Rod strip with rubber coating for tensioning straps & locking bars - Steel or aluminum locking bars - Interior lights - Reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Kdsdpfx Asu Htckjfvsl

Condition: new, empty load weight: 495 kg, maximum load weight: 805 kg, overall weight: 1,300 kg, loading space length: 3,040 mm, loading space width: 1,510 mm, loading space height: 1,800 mm, loading space volume: 8.1 m³, color: white, construction height: 2,450 mm, working width: 2,010 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, unbraked, plywood body 15mm roof/walls, braked, 6 lashing eyes, * IMMEDIATELY AVAILABLE * with plywood body 15mm roof/walls, braked, 6 lashing eyes Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1300kg - Unladen weight: 495 kg - Payload: 805 kg - Interior dimensions: 304 x 151 x 180 cm (L x W x H) - Overall exterior dimensions: 435 x 201 x 245 cm (L x W x H) - Loading sill height: 59 cm - Tires: 195/65R15 steel rim - Brake: yes - Support wheel: yes - 100km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - Floor: Wood, screen-printed board 15mm - Walls: 15mm plywood, plastic-coated - Roof material: 15mm plywood, plastic-coated - Chassis: ALKO rubber spring axle - Number of lashing eyes: 6 pieces (400kg/daN) - Rear door: yes, double-leaf - Tailgate: no - Tailgate material: - - Tailgate/door function: espagnolette lock - Clearance dimensions tailgate/flap: 140x175cm - Interior light: yes, with switch - Supports: at an extra charge - Overrun device & brakes: yes - 100km/h: incl. vehicle documents Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - stable V-drawbar, hot-dip galvanized - overrun device from ALKO - base plate 15 mm thick - side walls and roof made of multi-layer wood, 15 mm thick, with UV-resistant plastic coating - interior light mounted - 2-leaf rear doors - doors with special sealing profiles, made of hard/soft plastic - galvanized espagnolette lock and hinges - lashing rings in the frame profile, tensile force 400 kg per lashing ring, Dekra tested - jockey wheel - automatic reverse drive - plastic mudguards - 13-pin plug - reversing lights - large rear lights - 13-pin plug - rear lights - large rear lights. plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: ZBII & COC papers Accessories can be retrofitted - please enquire: - anti-theft device - rear supports - 100km/H approval with wheel bumper - side door - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slot-and-hole rails for tensioning straps & locking bars - bar strip with rubber coating for tensioning straps & locking bars - steel or aluminum locking bars - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Kodpfxou Hth He Afvsdl

Condition: new, empty load weight: 510 kg, maximum load weight: 790 kg, overall weight: 1,300 kg, loading space length: 3,040 mm, loading space width: 1,510 mm, loading space height: 1,800 mm, loading space volume: 8.1 m³, color: white, construction height: 2,450 mm, working width: 2,010 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, unbraked, drive-on flap, plywood superstructure 15 mm roof/walls, braked, 6 lashing eyes, * IMMEDIATELY AVAILABLE * with drive-on flap, plywood superstructure 15 mm roof/walls, braked, 6 lashing eyes Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1,300 kg - Unladen weight: 510 kg - Payload: 790 kg - Interior dimensions: 304 x 151 x 180 cm (L x W x H) - Overall exterior dimensions: 435 x 201 x 245 cm (L x W x H) - Loading sill height: 59 cm - Tires: 195/65R15 steel rim - Brake: yes - Support wheel: yes - 100km/h: at extra charge - Incl. vehicle documents Vehicle body: - Floor: Wood, screen-printed board 15mm - Walls: 15mm plywood, plastic-coated - Roof material: 15mm plywood, plastic-coated - Chassis: ALKO rubber spring axle - Number of lashing eyes: 6 pieces (400kg/daN) - Tailgate: No - Tailgate: Yes - Tailgate material: Plywood - Tailgate/door function: espagnolette lock - Clearance dimensions tailgate/flap: 140x175cm - Interior light: Yes, with switch - Supports: at an extra charge - Overrun device & brakes: Yes - 100km/h: incl. vehicle documents Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - stable V-drawbar, hot-dip galvanized - overrun device from ALKO - base plate 15 mm thick - side walls and roof made of multi-layer wood, 15 mm thick, with UV-resistant plastic coating - interior light mounted - 2-leaf rear doors - doors with special sealing profiles, made of hard/soft plastic - galvanized espagnolette lock and hinges - lashing rings in the frame profile, tensile force 400 kg per lashing ring, Dekra tested - jockey wheel - automatic reverse drive - plastic mudguards - 13-pin plug - reversing lights - large rear lights - 13-pin plug - rear lights - large rear lights. plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: ZBII & COC papers Special equipment included in the price: - White drive-over wall instead of rear door, with drive-over point Accessories can be retrofitted - please enquire: - Anti-theft device - Rear supports - 100km/H approval with wheel bumper - Side door - Motorcycle rocker panels - Motorcycle stand rails - Motorcycle lashing straps - Lashing straps - Additional lashing eyes - Slot-and-hole rails for tensioning straps & locking bars - Rod strip with rubber coating for tensioning straps & locking bars - Steel or aluminum locking bars - Interior lights - Reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Kodpju Ht Iaefx Afvjdl

Condition: used, System: Chamber filter press Type: Chamber filter press 800/68//80 Design: Side beam guided Year of manufacture: 1990 Kdodpfx Afswqzd Sovjl Machine No.: 02L53/319/665SL Filter plate size: 800x800 mm Number of plates: 68 / final expansion approx. 80 Filter plates: PP Cake thickness: 25 mm Filter cloths: optionally available matched to the medium Filter area: approx. 132 m² Press content: approx. 970 dm³ Filter pressure: approx. 15 bar Closing pressure: approx. 380-410 bar Plate transport: automatic Pump technology: optional Hydraulic unit: yes Control cabinet: yes Purchase or rental: Inspections of the systems by appointment at our facility.