Used Manifold Rtu 800 8-150 for sale (46,555)

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet, 2 doors, solid construction -Width: 800 mm Iodpjy R Nmzjfx Ab Neat -Depth: 630 mm -Height: 1790 mm -Shelves: See photos for layout/height -Weight: 100 kg

Condition: excellent (used), Year of construction: 2009, operating hours: 87,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (min.): 22,000 rpm, For sale is a CNC turning center manufactured by DMG, model CTX beta 800, year of manufacture 2009. The machine is in a well-maintained and fully operational condition. Technically flawless and immediately ready for operation. Technical Data Isdpfx Absyq Hq Ne Njat Machine type: CNC Turning Center Manufacturer: DMG Model: CTX beta 800 Year of manufacture: 2009 Control system: Heidenhain 4290 Max. turning length: 600 mm Tool turret: 12-position Tool holder: VDI 40 Operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h Linear guide Z1 recently renewed Turret drive S2 recently replaced Machine regularly serviced by customer service Technically flawless and fully functional Inspection under power possible by appointment Service and maintenance reports available Extensive accessory package Driven tools by WTO Further documentation and photos available on request Availability: from July 2026 If interested, simply write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: excellent (used), Year of construction: 2009, drilling depth: 350 mm, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, Deep hole drilling machine Mollart - LD8 - 150 Pellet Die Iasdpfx Aboyilgde Net Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM Max. drill Ø steel 1.5 - 10 mm Drilling depth 350 mm Table load 1600 Speeds / ranges 14000 Rpm Dimensions (Estimate) Length 4500 mm Width 4500 mm Height 2300 mm Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), CNC Lathe with y-axis Geminis Goratu - GHT-4 G4-800 Max. turning Ø:800mm Iodpfx Abjygv Eus Neat Length: 7000mm Width: 2500mm Height: 2500mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), functionality: fully functional, This offer is for a Canon imagePRESS C750 colour production system in mint condition Items for sale: 1 x Canon imagePRESS C750 with the following specifications: Includes Fiery Server Includes W1 Pro Staple Finisher Includes Paperdeck Lite XL-A1 Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 683 pages Iaodpfx Absy R Nmbs Njt Colour: Approx. 562 pages Black: Approx. 121 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, turning length: 800 mm, bar diameter (max.): 104 mm, 1 DMG Mori CTX 800 TC, year 2014 Control unit: Siemens 840 D SL with Shop-Turn 3 G Turning length: 800 mm Main spindle as integrated spindle motor ISM 76 with 5,000 rpm Hydraulically actuated collet chuck 104 mm Draw tube inner diameter: 104 mm C-axis with spindle brake Upper cross slide with turning/milling spindle HSK 63 As motor spindle with hydraulic clamping during turning Y-axis ±100 mm, B-axis ±110° Tailstock automatic/programmable Iasdpfoy Svvrjx Ab Nst Absolute linear measuring systems in X and Y axes 5-axis simultaneous machining Technology cycles Tool magazine with 48 stations HSK 63 Differential pressure clamping Chip conveyor, ICS (internal coolant supply) Automatic positionable steady rest slide Z-axis slide for steady rest carrier Steady rest incl. quick-change system Tropical package Infrared measuring probe Renishaw Oil mist separator

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 850 mm, turning diameter: 410 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 850 mm, spindle motor power: 28 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, quill travel distance: 800 mm, CNC Siemens 840D WORKING AREA: Maximum rotating diameter: mm 700 Iaodpfoy S Db Nex Ab Nst Maximum machining diameter: mm 410 X-axis travel: mm 300 Z-axis travel: mm 850 SPINDLE: Spindle nose: mm 170 h5 Bar capacity: mm 76 Chuck diameter: mm 315 P ower (40 / 100% ED): kW 28 / 20 Maximum torque (40 / 100% ED): Nm 315 / 225 Maximum spindle speed: rpm 5.000 Peak torque speed: rpm 900 FEED RATES: Rapid traverse X-axis: m/min 30 Rapid traverse Z-axis: m/min 30 Indexing accuracy: 0.025° TOOL TURRET: Number of driven tool stations: 12 VDI 40 DIN 69880 tool shank diameter: mm 40 Power (40% ED): kW 12 Maximum torque (40% ED): Nm 36 Maximum speed: rpm 4.000 TAILSTOCK: Tailstock travel with automatic movement: mm 800 Tailstock taper: MT 5 Maximum tailstock force: daN 800 Machine weight: kg 6.100 Machine equipped with: • Tool presetting system • Set of static tool holders - No. 1 axial driven tool holder • No. 1 radial driven tool holder • Autoblok self-centering chuck Ø 315 mm • High-pressure pump • Operation and maintenance manuals and CE declaration

Condition: repair required (used), Year of construction: 2009, 5-axis CNC machining center – universal – Manufacturer: RÖDERS Machine model: RXP 800 DS Year of manufacture: 2009 TECHNICAL DATA Travels - X-axis (mm): 475 - Y-axis (mm): 600 Ijdpfx Absy Smvco Njat - Z-axis (mm): 400 - A-axis (swivel table): +/- 95 - C-axis (rotary table): 360 EQUIPMENT FEATURES + RC 4 automation + Chip conveyor

Year of construction: 2004, condition: excellent (used), 1 used low pressure steam boiler ----- manufacturer : LOOS, Gunzenhausen type : U-ND capacity : 800 kg/h working pressure : 1 bar test pressure : 2 bar water contents full : 1.108 l year of construction : 2004 CE mark : 0036 equipped with Weishaupt gas burner G5/1-D, ZMD-LN, 200-900 kW, 120°C, fittings for gas supply, switch cabinet with touch panel, and the existing small and large-scale fittings. Dimensions of boiler body (approx.): diameter incl. insulation : 1.230 mm width : 1.450 mm transport height : 2.200 mm length : 1.950mm length including burner : 2.700 mm Iasdpsnp Hwkofx Ab Njt 1 used feedwater module ----- manufacturer : LOOS, Gunzenhausen type : WSM content approx. : 800 l with switch cabinet, sampling water cooler, 2 dosing vessels

Condition: used, bore 50 mm length 310 mm knife system Centrolock circle diameter 150 mm number of blades 4 Z Two planing heads Weinig type 531 150 01 498 including a batch of untested knives. Iasdpjyz Dftjfx Ab Net

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 0-250-84-4817, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,250 mm, controller manufacturer: HOMATIC, total height: 2,800 mm, table length: 4,300 mm, table width: 2,250 mm, controller model: PC86 PowerControl, spindle motor power: 12,000 W, Equipment: documentation/manual, HOMAG CENTATEQ N-800, BHP 210/43/22/R 4-axis CNC machine Year of manufacture: 2019 IMPORTANT: Available from mid October 2026 Maximum workpiece dimensions: • X-axis: 4300 mm • Y-axis: 2250 mm • Z1-axis: 410 mm, Z2-axis: 185 mm EQUIPMENT / SPECIFICATION MATRIX-PRO working table, size 4300 x 2250 mm - 4 pneumatically retractable stoppers w. sensor monitoring - 3 vacuum pumps, capacity 290/345 m3/h each at 50/60 Hz, total 870/1035 m3/h - 2 vacuum fields with each 2150 x 2250 mm Iaodpfx Absy Sv I Ue Nst - Safety mats, safety fences with door - Main spindle motor 11 kW, 24.000 rpm - liquid-cooled - spindle with C-axis - tool clamping system HSK F63 - Tracing system SENSO-FLEX, controllable in z-direction - vertical drilling unit w. 21 spindles, drive motor 2.3 kW - 14-fold tool changer (disk type) 1 CONVEYOR ROLLER TABLE 7080 x 2200 mm Control / software: - PowerControl PC86 power touch - WoodWop Machine dimensions 11,60 x 4,50 x 2,80 m Available from week 28/2026

Condition: new, functionality: fully functional, mileage: 3,000 km, power: 206 kW (280.08 HP), first registration: 01/2026, fuel type: diesel, overall weight: 15,000 kg, tire size: 14.00 R 20, axle configuration: 4x4, wheelbase: 4,150 mm, fuel: diesel, brakes: engine braking, color: beige, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: parabolic leaf (spring), Year of construction: 2023, Equipment: ABS, air conditioning, all wheel drive, compressor, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, NEW VEHICLE with day registration on 05.01.2026! Iaedsy Slk Sjpfx Ab Nst *WARRANTY EXTENSION available optionally for up to 5 years from first registration! In addition to the standard equipment, the following factory-fitted options are included: - Differential lock on the driven front axle - Rear axle ratio: i = 5.72 - Spare wheel, dimensions match chassis tires - 170 Ah batteries for Eurocargo - Mechanical battery isolator mounted to the chassis at the battery box - Alternator 2880 Watt (24 Volt x 120 Amp) - Voltage converter 24/12 Volt (10.5 Amp) - Preparation for toll system (OBU), includes third DIN slot, antenna, and wiring in dashboard (without on-board unit) - Front and ramp mirrors are manually adjustable but heated - Luxury passenger seat, 4-way adjustable, air-sprung, integrated headrest and seatbelt, heated, lumbar support - Compressed air connection in engine tunnel console - Electronic immobilizer and third vehicle key - Luxury driver's seat, air-sprung, heated, multi-way adjustable, lumbar support and headrest, with integrated 3-point seatbelt - Iveco radio DAB+, Bluetooth, integrated microphone, mini-USB/AUX input, LCD display - Air conditioning with manual controls - Multifunction steering wheel with steering wheel controls - Pollen filter for cab - Exterior mirrors for body width 2500 mm - Tinted windscreen and side windows - Headlamp protective grilles - Sunblind rollers for side window (driver and passenger side) - Sun protection film integrated into windscreen - Diesel/air parking heater with timer (Eberspächer, AirTronic D2), thermal output 2.2 kW - Preparation for roof beacons - Trailer socket for 12 Volt operation, 13-pin - Trailer socket for 24 Volt operation, 15-pin - Adapted exhaust tailpipe for water fording - Plastic fuel tank, lockable, 200-liter capacity - Pre-fuel filter type Racor with separator, heated - Aluminum air reservoirs, number varies by suspension and trailer configuration - Parabolic spring front suspension - Parabolic spring rear suspension - Rear cross member for central axle trailer, D = 190 kN - Side exhaust tailpipe, left - CAN-bus interface 'CAN-OPEN' for body control - 360 ccm air compressor, recommended for trailer operation with full air brake system - MICHELIN XZL+ 14.00 R 20 off-road tires - Color: Light Ivory, IC 074, similar to RAL 1015 Purchase / Financing / Hire Purchase / Leasing / Rental possible. Subject to errors and prior sale! Images may include chargeable optional equipment! Delivery date by arrangement! Viewings by appointment only! Address is office only, not the vehicle location! Our Terms and Conditions apply!

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C71JGTY02008, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Weights Empty weight: 1.918 kg Functional Generator capacity: 150 kVA Dimensions of cargo space: 352 x 113 x 181 cm CE mark: yes Other information Generator: Caterpillar LC 3114H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 349 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = Iedpfx Abjwqkn To Noat - Battery - Control Panel - Steel canopy - Tank

Condition: ready for operation (used), Heidenhain ROD 800 36000 H5 angle encoder. 219 845 21, SN: 2133393B, professionally fully overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos. Iaedox Er Svopfx Ab Net

Condition: good (used), Year of construction: 2011, functionality: fully functional, Industrial steam boiler Brand Loos Bosch Group Model U-ND 800 Serial number 109582 Year of construction 10/2011 Total capacity: 1108 liters Steam output 800 kg per hour with Weishaupt GmbH burner Burner type WM - L10/3-A Year of construction 2011 Minimum: 250 kW Maximum: 800 kW Steam boiler dimensions: 2500 mm x 1600 mm x 1900 mm, Storage tank Achenbach GmbH Capacity: 800 liters Dimensions: 1600 mm x 850 mm x 2600 mm Iedpfx Abev I E Tgs Neat Control cabinet Dimensions: 1000 mm x 180 mm x 750 mm. Burner after major renovation in 2024.

Condition: used, Year of construction: 2010, Mazak VTC 800/30SR 5-Axis Machining Centre. S/No. 215592 (2010) with Mazatrol Matrix Control, X/Y/Z Travels 3000/800/720mm, Table 3500mm x 820mm, Spindle Speed 18,000rpm, Spindle Taper BT40, B Axis Swivel Head +/- 110. Country of Origin: United Kingdom Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Iaodpfx Abey Ib N No Njt Location: These lots are located in Birmingham & Wolverhampton, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 16,661 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 480 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 845 mm, bar diameter (max.): 67 mm, overall weight: 10,000 kg, controller manufacturer: SIEMENS, controller model: 840 D, number of slots in tool magazine: 48, swivel angle B-axis (min.): 110 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens sl Operate 3G control, a counter spindle with a C axis, and dual chucks on both main and counter spindles. Equipped with a 48-tool HSK 63A chain magazine and a coolant system capable of 8/20 bar, it's ideal for complex turn-mill operations. Consider the opportunity to buy this DMG MORI Beta 800 TC turn-mill centre. Contact us for more information about this machine. • CNC control: Siemens SL Operate 3G, 1 channel, without CELOS • Configuration: Counter spindle ISM 52 with C-axis (instead of tailstock) • Tool magazine: Chain magazine for 48 tools, HSK 63A • Coolant system: 8/20 bar, 600 l tank • Chuck rinsing for main and subspindle • Coolant supply to counter spindle Additional equipment • Workholding: • Main spindle: 3-jaw chuck SMW BBD210-66 and DMG TCC 65 collet chuck • Counter spindle: 3-jaw chuck SMW BBD210-66 and DMG TCC 65 collet chuck • Chip conveyor: Hinge type • Preparation for mist collector • Bar machining package Ø 67 mm Iedpfx Abox H U Ezj Njat • Tool measurement probe: Blum B-H7210 • Approx. 40 toolholders (to follow) Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2014, operating hours: 27,608 h, controller manufacturer: SIEMENS, This 5-axis DMG MORI CTX beta 800 TC was manufactured in 2014. It features a main spindle speed of 5,000 RPM and a sub spindle speed of 6,000 RPM, along with a 24-piece tool magazine. Ideal for complex turn-mill operations, consider the opportunity to buy this DMG MORI CTX beta 800 TC turn-mill centre. Contact us for further details regarding this machine. • Tools: 24 pcs • Incl tools shown on the pictures Ijdsx U D Hqjpfx Ab Neat • Excl barfeeder

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2021, total length: 13,520 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 6,920 mm, color: black, Year of construction: 2021, Axle configuration Tyre size: 385 / 65 / R22.5 Iasdpfxoy Nwp Ue Ab Njt Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 5.600 kg Carrying capacity: 37.400 kg GVW: 43.000 kg Functional Make of bodywork: Renders Euro 800 Maintenance, history and condition Number of owners: 4 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2020, total length: 13,520 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 6,920 mm, color: black, Year of construction: 2020, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Renders Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 5.600 kg Carrying capacity: 37.400 kg GVW: 43.000 kg Functional Make of bodywork: Renders Euro 800 Iedpey Nwpzjfx Ab Noat Maintenance, history and condition Number of owners: 5 APK (MOT): tested until 07/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, Year of construction: 2000, infeed width: 800 mm, working width: 320 mm, Maximum product thickness: 8 mm Iasdpfxey N Umdj Ab Not Maximum format / working width: up to 320 mm Minimum format: 100 x 80 mm Maximum stacking height: 400 mm Pressing force: 0 – 20,000 N, steplessly adjustable Speed: 50 – 180 m/min, continuously adjustable Infeed height: 450 – 950 mm, adjustable Outfeed height: 875 mm Power requirement: 1.0 kW, 230/400 V, 50/60 Hz Control: plug connection for interface to all common folding machines / collators / die-cutters

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Iedpfx Asvuuhgsb Nsat Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: excellent (used), Year of construction: 2014, operating hours: 20,980 h, turning length: 800 mm, turning diameter over cross slide: 340 mm, turning diameter: 500 mm, spindle motor power: 25,000 W, spindle speed (min.): 1 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 76 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 800 mm, mount diameter: 250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, rotational speed (min.): 1 rpm, overall weight: 6,800 kg, DMG MORI CTX beta 800 – CNC Lathe Manufacturer: DMG MORI Model: CTX beta 800 Year of manufacture: 2014 Control: Siemens ErgoLine Technical Data Iasdpfx Aey R Agbob Nst Max. turning diameter: approx. 500 mm Turning diameter over cross slide: approx. 340 mm Turning length: approx. 800 mm Chuck diameter: 250 mm Bar capacity: approx. 76 mm X-axis travel: approx. 300 mm Z-axis travel: approx. 800 mm Tool turret: 12-position Spindle speed: max. 4,000 / 6,000 rpm Spindle power: approx. 25 kW Voltage: 400 V Frequency: 50 Hz Connected load: approx. 65 kVA Machine weight: approx. 6,800 kg Equipment Siemens ErgoLine operator panel Hydraulic chuck C-axis Chip conveyor Coolant system Precision CNC slant bed lathe Condition Machine can be inspected under power Subject to prior sale Offered without tooling Ex-works location Technical data without guarantee Service Disassembly, loading, and transport possible Europe-wide processing available 📍 Location: Germany 📩 Further information, photos, and videos available upon request

Condition: ready for operation (used), -packet-jointing line -for timber infeed 900-5.100 mm -double-roller conveyor -cut saw with marking recognition 15 KW -packaged -finger jointing milling automate 80 KW -singling cross conveyor -roller conveyor -cycle press hydraulic 20 KW -automatic under table circular saw 5 KW -wood widths of 70 - 255 mm Iasdpfx Aobqqzgjb Njt -wood thickness from 22 to 140 mm -wood input from 900 to 5100 mm -pressing force 12 tons -capacity from 7.000 to 10.000 meters / 8 h -options example cycle press 25 to or 40 to

Condition: used, Year of construction: 2015, functionality: fully functional, input voltage: 400 V, Used baguette long moulder model FVF 800 Weight range approx. 50 – 1200 g Output/hour approx. 1,200 pieces - Stainless steel housing - Mobile undercarriage - Various new parts (bearings, drive shaft, main switch, new belts) - Technically inspected, cleaned Fully functional (Photos = sample model) All prices are net plus VAT, ex works Syke. Available at short notice (shipping possible at buyer's cost) Advance payment required with order We operate exclusively under our General Terms and Conditions. Subject to prior sale, technical modifications, and errors. Iaedjy N S Dyopfx Ab Net