Used Matec 30 S for sale (80,675)

Condition: used, functionality: unexamined, Year of construction: 2014, overall weight: 1,500 kg, total height: 4,500 mm, total length: 10,000 mm, total width: 5,000 mm, load capacity: 350 kg, FEINAUER - FRAMATECH LH PP 350 S 70 KBK system with suction lifter, Bedozakwxepfx Aggewn used Manufacturer: FRAMATECH and FEINAUER Consisting of: rail with a length of approximately 10 m, traverse with FRAMATECH LH PP 350 S 70 suction lifter, year of manufacture 2014, serial number 20145040/4, maximum load capacity 350 kg, swiveling, 4 suction plates, total travel range approximately 10000 x 5000 mm Year of manufacture 2014 The machine was acquired by us in 2024 from Surplex during the insolvency proceedings of Lechner GmbH in Rothenburg. However, due to company restructuring, it was never assembled. The machine is currently disassembled and stored in our warehouse. Sold as is, without any further technical inspection. If you have any questions or require further information, please do not hesitate to contact us via message or phone.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,250 kg, total length: 82,200 mm, total height: 5,000 mm, clearance between the columns: 3,300 mm, shelf height: 5,000 mm, number of shelf rows: 6, clear span: 3,300 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 13,700 mm, support length: 3,300 mm, 2 single-row pallet racks + Bedozanyqopfx Aggewn 2 double-row pallet racks (8 x M50113313-4) each 13.7 m long, 5 m high, 1.1 m deep, each with 4 bays, each with a clear width of 3.3 m, each with 3 beam levels, load capacity per bay 3250 kg. - 30 frames (RM5011 - RAL5019) - 80 baseplates, shims, screws - 20 spacers/connectors for double rows (ZAbh20) - 120 floor anchors (ZZBA1210) - 144 single beams (T33135 - RAL2008) - 0 impact protection / collision protection (ZRS40901) - 6 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made to the entire territory of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are made according to individual agreement.

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Bwedpfx Agjvvkmbegjn Storage location: Nattheim

Condition: used, Make: Leomotor A/SType: KC 218B159 - LM 2000 - 12630 Bwjdodc A Rnepfx Aggen

Condition: used, machine/vehicle number: 008382, Max width workable: 800 mm Bwedpfxeywadwj Aggon Max length workable: 2800 mm Max height workable: 1320 mm Max feed speed: 40 m/min

Condition: excellent (used), Professional industrial robot from the renowned manufacturer SHINI, designed for automation of production processes – mainly for removing parts from injection molds and handling components. The device is used in the plastics processing industry (injection molding machines), ensuring fast and repeatable work cycles, increasing production efficiency. The robot is equipped with a handheld controller (teach pendant), allowing for programming of movements as well as automatic mode. Technical data: Bjdpfx Agjy Duzqogown • Manufacturer: SHINI Plastics Technologies • Model: S-530-V-2KM7-CE • Year of manufacture: 2017 • Power supply: 230V (single phase) • Frequency: 50 Hz • Power: 30 W • Payload / Application: robot for light-duty applications (parts removal from molds) • Arm reach: approx. 550 mm • Pneumatic gripper (operating pressure: 2–10 bar) • Manual control + AUTO mode • Complete wiring • Weight: approx. 62 kg Equipment included: • SHINI robot • Handheld controller (teach pendant) • Pneumatic gripper • Cables and installation • Documentation (visible in photos) Condition: Used – normal signs of use. Technically sound and ready for operation. Additional information: • Sold exactly as shown in the photos • Inspection before purchase possible • Pallet shipping available Applications: • Injection molding machines • Production automation • Part removal • Pick & place operations

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 82,200 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, number of shelf rows: 6, shelf height: 5,000 mm, shelf length: 13,700 mm, support length: 3,300 mm, 2 single-row pallet racking systems + 2 double-row pallet racking systems (8 x M50113313-4) each 13.7 m long, 5 m high, 1.1 m deep, each with 4 bays, 3.3 m wide, Bodpfxey Tt Dio Aggjwn each with 3 beam levels, load capacity 3250 kg. - 30 upright frames (RM5011 - RAL5019) - 80 base plates, shims, and fasteners - 20 spacers/connectors for double rows (ZAbh20) - 120 floor anchors (ZZBA1210) - 144 single beams (T33135 - RAL2008) - 0 impact protection/collision guard (ZRS40901) - 6 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after payment receipt - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), Year of construction: 2008, Weishaupt RGMS 30 dual-fuel burner, gas + heavy oil Output: 2300 kW Year of manufacture: 2008 Bwjdpfx Agomnqbwjgjn Please arrange an inspection by phone beforehand! We prefer to sell to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical errors or data transmission errors. Of course, we will also take care of all formalities. Loading possible.

Condition: good (used), Approx. 30lfm shelf rack system Schaefer R3000 Manufacturer: Schaefer R3000 as good as new, see pictures. upright, galvanized, 2,5 m height, depth 60 cm Shelves, galvanized, 200 kg load/ shelf, shelf width approx.100 cm Negotiable price: € 3.290,00 net ex stock Offer consists of: 31 pcs. uprights or frames, height 2,5 m, galvanized 90 pcs. Shelves, 200 kg load per shelf, galvanized 10 pcs. cross bracing for stiffening 3 levels per field (of course more levels are possible against surcharge) Other combinations possible. Heights 2,3m, 2,5m or 3m available. Goods are in stock. Constantly more than 3000 running meters of pallet racks from numerous manufacturers in stock. Transport and assembly on request. Further information on request. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock) Purchase / Sale We look for, and/or offer constantly numerous articles from most diverse ranges. To get to our site, please click on our logo! broom-clean business evacuations Bwjdpfxjccxuio Aggjn company dissolutions Fast- flexible - ready to hit! We clear and dispose also for liquidators. Write us with some keywords, we will contact you immediately.

Condition: good (used), 30 running meters of shelving Schäfer type R7000 used, good condition, see pictures height 2,1 m depth 50 cm load / compartment 200 kg bay width ca.99,8 cm Negotiable price: € 3.250,-- net ex stock Offer consists of: + 31 pcs. uprights or frames, 2,1 m galvanized +120 pcs. Shelves, 200 kg load/shelf, galvanized Bedpsh Eulkjfx Aggjwn 4 levels per bay (more are of course possible at extra cost) Different heights up to 12 m available. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous articles from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 80 V, total height: 798 mm, total length: 1,228 mm, total width: 478 mm, Tested forklift battery for your truck – 80V 3PZS 465 – special tray + 1 year warranty + incl. Aquamatik system + incl. end discharge devices & REMA 320 connector (other connectors available upon request) + Capacity: min. 90–100% (C5 capacity protocol supplied upon delivery) + Year of manufacture: 2024 Bwjdey Rnr Nopfx Aggen Dimensions: Length: 1,228 mm Width: 478 mm Height: 798 mm Weight: approx. 1,210 kg Suitable for the following models and others: Jungheinrich EKX 514 Jungheinrich ETX Jungheinrich ETX 514 Toyota FBM16 Toyota FBMF16 Bradshaw T20 Dimos EFY3504R Heli CPD 30 All common battery sizes available, please inquire. Transport possible.

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Bsdpfxsy Rnr Aj Aggswn Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A Bwedpfx Agjy Rnqfegjn + 1 year warranty + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following models and others: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,026 mm, total width: 996 mm, Tested forklift battery for your forklift - 80V 6PZS 750Ah - DIN A + 1-year warranty + incl. Aquamatik (automatic water filling system) + incl. end discharge connector & REMA 320 plug (other plug types can be installed as needed) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) Bwsdpfsy Rnp Iox Aggon + Year of manufacture: 2024 Dimensions: Length 1,026 mm Width 996 mm Height 627 mm Weight: approx. 1,730 kg Compatible with the following models and others: Toyota 7FBMF30 Toyota 7FBMF35 Crown TSP 6000-D Crown TSP 7000 Common battery sizes available, please inquire. Transport possible.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 Bedpfx Agsyxccregown - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: good (used), Com J240/30 Banding Machine on a Base One of the most recognizable banding machine manufacturers on the market, manufactured in Japan. The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone structure with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for packaging business cards, leaflets, and other materials. Technical specifications: Bjdpfxoy Nzlts Aggown Tape width: 30 mm Performance: 26 cycles/min Dimensions of the banded product: 240 x 150 mm Made in Japan. Weight: 70 kg.

Condition: used, machine/vehicle number: 007905, Max. panel width: 1200 mm Bjdpfjy Nkrpox Aggown Max. panel length: 2500 mm Length of conveyor: 13800 mm

Condition: good (used), Year of construction: 1997, functionality: fully functional, Specifications Manufacturer MAZAK Model SQT 30MS Year 1997 Condition Used Description MAZAK SUPER QUICK TURN 30MS CNC SUB SPINDLE, 'C' AXIS, DRIVEN TOOLING LATHE WITH MAZATROL T PLUS CONTROL Kitagawa B-212 3 Jaw Power Chuck. Maximum Swing Ø560mm. Maximum Swing Over Cross Slide Ø500mm. Maximum Turning Ø413mm. Bwjdpovk Ewkefx Aggen Distance Between Spindles 1,035mm. Main Spindle Bore Ø88mm, Sub Ø61mm. Axis Travel 'X'=244mm, 'Z'=1,035mm, 'B'=1,067mm. Maximum Main & Sub Spindle Speeds 3,000rpm. Maximum Milling Spindle Speed 1,500rpm. 12 Station Turret. TOOLINGS INCLUDED WHICH WERE USED IN THE WORKSHOP AND EQUIPMENT FROM PHOTOS WEIGHT 6700 KG DIMENSIONS: LENGHT 4010 mm WIDE 2100 mm HEIGHT 2160 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 8,737 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Matec 30HV 3000x800x800 mm NC swing head +/- 105° swiveling Heidenhain TNC640 Handwheel Motor spindle 15,000 rpm / 30 kW / 198 Nm Tool holder HSK 63A 48 tool pockets ICS (internal coolant supply) 40 bar Belt filter system 450 liters Air through spindle Oil mist extraction (left and right) Partition wall for pendulum operation Side loading door Prepared for additional NC axis 3D triggering probe Renishaw RMP60 Tool breakage control (laser) Clamping hydraulics 100 bar / 10 l/min 2 x clamping circuits, clamping, releasing, manual and via M-function Robot interface Bwjdjyaa Sfspfx Aggon The machine has very low operating hours and has always been perfectly maintained. The complete (maintenance) history is known to us. Tools and vices can be taken over if required.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Initial commissioning: 2002 Control: Heidenhain iTNC530 Machine hours: to follow X-axis: approx. 6,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,100 mm A-axis: C-axis: Bwodjyzz R Hepfx Aggen 2-axis milling head Spindle speed: max. 14,000 rpm Additional equipment - Double-sided enclosure Machine condition Fully functional, in very good condition. Machine remains powered and is available immediately.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1786, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik One, table load: 1,500 kg, rotary table diameter: 800 mm, rotational speed (min.): 25 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, tool length: 460 mm, tool diameter: 200 mm, tool weight: 10,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, maximum swivel angle +/- 105 degrees Direct path measuring system +/-3, optionally continuous or settable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct path measuring system on X, Y, Z axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Siemens Sinumerik ONE control Modern CNC system for highly productive machine tools, consisting of: NCU 1740 22" ITC2200 V3 display MCP 2200 machine control panel - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) Bedpfxexg Dhcj Aggjwn - Internal coolant supply 20 bar Tank capacity of paper filter system 900 l Filter capacity 160 l/min. - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to the external nozzles at the spindle head. #20 bar# - IK-compressed air through the tool - Partition wall for double-station system - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring - Automatic safety doors

Year of construction: 2010, condition: good (used), Our Asys buffer system is for sale. Bsdpfx Ajyylqzeggjwn Type: FPS 30 B Year of manufacture: 2008 Condition: good Available immediately

Year of construction: 1994, condition: defective spare-parts repository (used), machine/vehicle number: 20 048 M100390 130003048, movements x/y/z: gross/klein 6500/300 mm spindle turning speed range: 5400 rpm number ob tool positions: 8 pieces carriages: x/y u. z 60/30 mm/miin spindle drive: max. 5,5 kW The machine is sold as a spare part carrier because the controller is defective. electrical connection: 400 V kW space needed: 8600 x 2270 x 2150 mm Bedpfx Agoz N T Sjgown weight: ca. 5000 kg

Condition: ready for operation (used), Year of construction: 2000, Machining length X: 5000mm, machine dimensions X/Y/Z: approx. 7500mm/3500mm/3500mm, weight: approx. 14000kg, control system: Heidenhain 426, operating hours: 91758h, running hours: 36086h. Including tool changer and tool holders. Without extraction system. Documentation available. An on-site inspection is possible. Bjdpfx Agjywln Ijgown

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1791, MATEC 30HV/NC X = 2,000 mm Y = 825 mm Z = 800 mm / horizontal Z = 675 mm / vertical - 1-axis CNC swivel head Swivel radius 300 mm, swivel angle max. +/- 105 degrees Direct path measuring system +/-3, optionally continuous or indexed with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Electronic handwheel (portable) Bsdpjxg D Atefx Aggjwn - Remote diagnosis / remote maintenance - Tool magazine with 48 positions - Additional tool magazine with 216 positions Fixed tool magazine for loading the internal tool changer of a machine tool. Including: - Linear and rotary axes with drives - Controllers and sensors - Gripper for tool holder SK40 - Sheet steel enclosure - 6 tool levels for storing up to 216 tools with SK40 holders D = 80 mm or D = 160 mm if adjacent slots are free, comprising: 40 pcs. with L = 430 mm 64 pcs. with L = 260 mm 112 pcs. with L = 160 mm Maximum tool weight: 10 kg - Tool loading and unloading via tool flap - Transfer to machine via double gripper - Tool data entry via the machine operating panel, selection of tool positions via the operating panel of the additional magazine - Option: Operating panel for tool data entry at additional magazine - Additional price for motor spindle 9,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar - Internal coolant supply 40 bar - Compressed air to external nozzles - Internal compressed air through tool - Rotoclear - Automatic safety doors - HOWIMAT CNC 220.2/TMI-50 rotary table 1-axis precision indexing table with direct drive Indexing accuracy deviation max. +/- 10 seconds Radial/axial runout deviation max. +/- 0.003 mm - Single rotary union for rotary table or counter bearing - Zero-point clamping system integrated in the machine table, without draw studs and cover. - Tool breakage monitoring - Fully enclosed work area with roof - Bellows with steel lamellae - Direct measuring system X-, Y-, Z-axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Installation elements