Used Mecos Mecos Syncro 135/3000 for sale (6,762)

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 58517824, overall weight: 10,000 kg, inner dimension height: 2,370 mm, inner dimension length: 12,200 mm, inner dimension width: 3,000 mm, total length: 13,075 mm, total width: 3,410 mm, total height: 3,470 mm, type of input current: AC, conveyor belt width: 3,000 mm, conveyor belt speed: 15 mm/s, axle spacing: 12,500 mm, Technical details: Chain: Full pin chain with idler roller, DIN 8167, M112 (breaking force 160 kN), pitch 160 mm Kjdpfxozvbldj Andjna Drive: Flat gearbox motor, FR left, SEW FA127/G R77 DRN90S4/TF, 230 / 400 V, 50 Hz, IP 54, IE3, ISO B, 1.10 kW, 0.91 rpm, design M1, mounting height 100 mm Construction: Edge profile 5 mm Belt quality: EP 400 / 3, cover 4:2, oil and grease resistant, both sides with edge-flush T-cleats 20 mm, 26,000 mm endless The conveyor belt has been out of operation since approximately early 2020. The system has been partially dismantled; Figure 1 shows an identical system, which could also be inspected while in operation. The drive motor (1.1 kW) is not available. The steel substructure is only partially present.

Condition: good (used), Year of construction: 1990, pressing force: 3,000 t, Bending length: 14,000 mm Column width: 10,500 mm Kjdpozva Ahjfx Andena Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Ksdpfxjzuyg Rj Andona Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. The system is offered in its current condition and with the components shown in the pictures.

Condition: excellent (used), mileage: 280,545 km, power: 309 kW (420.12 HP), first registration: 10/2016, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 8,970 mm, loading space width: 2,530 mm, loading space height: 2,680 mm, Year of construction: 2016, Equipment: ABS, AdBlue, central locking, crane, power mirror, tail-lift, = Additional options and accessories = - Aluminum fuel tank - Lift Axle - Radio/CD player - Sun visor - Tailgate = Remarks = Crane Number of hydraulic extensions: 3 Number of support legs: 2 Remote control: ✓ Load Hook: ✓ Meter capacity: 10 m Capacity kilo: 5430 kg = More information = General information Number of doors: 2 Cab: single Registration number: EG943GJ Technical information Number of cylinders: 6 Engine capacity: 11.120 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Lift axle Weights Empty weight: 15.828 kg Carrying capacity: 10.172 kg GVW: 26.000 kg Functional Tail lift: dhollandia DHLM 30, tail lift, 3000 kg Crane: FASSI F 135, year of manufacture 2016, behind the cab Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Kodpfx Anozt I R Usdsna Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Technical details: x-travel: 3000 mm y-travel: 1500 mm cutting thickness max.: 32 mm table-size: 3000x1500 mm burner heads: 1 Stück Knjdpfezu Nhdox Andja Swift-Cut is part of ESAB Welding & Cutting GmbH. The machine consists of several components: Plasma cutting table: Swift-Cut Plasma power source: Hypertherm MAXPRO200 / 400 V / 3-phase / 50 Hz / Max. output current: 200 A / Input current according to the nameplate: max. 64 A / Mild steel cutting capacity: 32 mm production cutting / 75 mm max. severance cut Extraction system: Keller VARIO-2-KM12-BE30 / Year of manufacture: 2019 *

Condition: new, Year of construction: 2025, table length 3000 mm table width 1500 mm table height 200 mm weight 1500 kg Manufacturer: GERD WOLFF Technical Details: • Length 3000 mm • Width 1500 mm • Height 200 mm • Weight 1500 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine Knjdpfjymf Rtox Andja scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, plate width 3000 mm plate depth 1500 mm plate height 300 mm weight 3580 kg dimensions of the machine ca. 3000 x 1500 x 300 mm GERD WOLFF clamping plate 3000 x 1500 x 300 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way, we can manufacture a clamping plate according to your requirements. T-slot size: 52 x 28 T-slot spacing: 300 Number of slots: 5 Edge distance: 150 Knsdpoyk Ik Djfx Andoa Weight: 3580 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III

Condition: used, Control 820 M Knjdpfxoy Tbwdj Andsa

Condition: used, plate width 3000 mm plate depth 2000 mm plate height 230 mm weight of the machine ca. / t Clamping plate Dimensions: 3000 x 2000 x 230 mm T-slot dimensions: 42 x 72 x 74 (H) Knedsud Iw Uepfx Andea The images are for illustrative purposes only. More pictures will follow.

Condition: used, plate width 3000 mm plate depth 5000 mm plate height 400 mm weight 20 t dimensions of the machine ca. 5 x 3 x 0,5 m Table length 5000 mm Table width 3000 mm Table height 380 - 400 mm Knedpfsgrnfgex Andea Machine weight approx. Approx. 20000 kg Space requirement approx. 5 x 3x 0.5 m

Condition: new, plate width 3000 mm plate depth 2000 mm plate height 300 mm Knsdjyk Ikkopfx Andsa weight 4600 kg GERD WOLFF clamping plate 3000 x 2000 x 300 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way, we can manufacture a clamping plate according to your requirements. T-slot size: 52 x 28 T-slot spacing: 300 Number of slots: 6 Edge distance: 100 Weight: 4600 kg Casting quality HT250 Flatness less than 0.12 mm Surface treatment according to DIN 876 / III

Condition: new, plate width 3000 mm plate depth 1000 mm plate height 600 mm weight 4200 kg GERD WOLFF clamping cube 3000 x 1000 x 600 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 38 x 22 T-slot spacing: 140 Number of slots: 10 Edge distance: 80 Weight: 4200 kg Casting quality HT250 Knjdpfx Anjymf H Iedoa Flatness less than 0.12 mm Surface machined according to DIN 876/II Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block

Condition: new, table length 3000 mm table width 2000 mm table height 200 mm weight 1700 kg Manufacturer: GERD WOLFF Technical Details: • Length 3000 mm • Width 2000 mm • Height 200 mm • Weight 1700 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) • Plate thickness: 25mm Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 Knedpfsymf R Hex Andja • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, Year of construction: 2023, plate width 2500 mm plate depth 3000 mm plate height 300 mm weight / kg Clamping plates - T-slot plates - plate field 2500 x 3000 x 300 mm If you have not found the size you need, you can also send us an e-mail send us an e-mail with the filled PDF form. With this we can to produce an individual plate for you. Kedpfsyk Imfox Andona Number of grooves: 10 edge distance: 66mm groove spacing: 22mm Casting quality HT250 Flatness less than 0,12 mm. Surface machined according to DIN 876/III

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping Knedpfx Anjzuzlnsdsa cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: used, mileage: 29,852 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,680 mm, first registration: 02/2024, fuel tank capacity: 80 l, CO₂ emissions: 244 g/km, emission class: euro6, color: white, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, navigation system, parking sensors, power assisted steering, trailer coupling, = Additional options and accessories = - Passenger seat - Bluetooth - Hands-free system - Third brake light - Electric front windows - Electrically adjustable exterior mirrors - Remote central locking - Tinted glass - Rear doors - Height-adjustable steering wheel - Rear parking sensors - Radio - Rear-view camera - Partition without window = Notes = Navigation Trailer hitch Hands-free system Bluetooth Parking sensors Passenger seat = Additional information = General information Number of doors: 5 Model range: Oct. 2020 - Apr. 2024 Cab: single Registration number: V-38-RBD Technical information Knsdozt Rnvjpfx Andea Torque: 360 Nm Number of cylinders: 4 Engine displacement: 2,298 cc Transmission: 6 gears, manual transmission Dimensions Length/Height: L2H2 Dimensions (L x W x H): 505 x 207 x 231 cm Weights Unladen weight: 1,956 kg Payload: 1,344 kg GVW: 3,300 kg Max. towing capacity: 2,500 kg (unbraked 750 kg) Consumption Average fuel consumption: 9.1 l/100km Maintenance APK (technical inspection): valid until 02.2027 Product safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: used, Year of construction: 2002, machine/vehicle number: 02153/29, AVAILABLE from 08/2026 UV dryer, Cefla UV 2000 Kedpfoyifwpex Andena - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TN3000 - Year of manufacture 2003 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. - diagonally positioned tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - with belt transport - Length 3.000 mm - Width 2.300 mm - Height 1.500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5%

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: documentation/manual, foot remote control, Tilting device for containers, welding table, welding turntable, roller stand 3000 kg load capacity with foot-operated remote control Speed infinitely adjustable, 80 to 1600 mm/min. Kedpfx Aszu I Ipendena Diameter 40 mm to 1400 mm Roller diameter 200 mm L: 800 x W: 370 x H: 450 Model or color variations possible Note: Height adjustment / support stand dimensions can be customized for an additional charge. Example as shown in the image. Additional charge: €1200.

Condition: used, mileage: 41,600 km, power: 177 kW (240.65 HP), first registration: 08/1998, fuel type: diesel, empty load weight: 8,765 kg, maximum load weight: 5,235 kg, overall weight: 14,000 kg, fuel: diesel, color: blue, driver cabin: other, gearing type: other, emission class: none, suspension: other, total length: 8,000 mm, Year of construction: 1998, construction height: 3,250 mm, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Ksdpfoziqltex Andena Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, mileage: 19,700 km, power: 75 kW (101.97 HP), first registration: 11/2003, fuel type: diesel, next inspection (TÜV): 01/2027, color: beige, gearing type: mechanical, emission class: euro3, number of seats: 5, Equipment: ABS, all wheel drive, central locking, immobilizer system, parking heater, First owner. Only 19,700 total kilometers driven since new. Comes with service booklet. Last service in 2025 at 17,983 kilometers. Engine, transmission, and rear axle oil changed. Timing belt replaced. Tires also replaced at the same time; fitted with Semperit winter tires, DOT 2023/2024. Manufactured in February 2003 and first registered in November 2003. One of the last T4 Syncro models built. Long wheelbase. Originally, it was technically intended for factory installation to be registered as a standard passenger vehicle with 9 seats. However, this registration was immediately removed from the original vehicle registration document because the vehicle was always used as an operational vehicle. The actual registration type has always been "Other motor vehicle, water rescue operational vehicle." Currently, 5 seats are registered and actually present; all are robust and easy-to-clean synthetic leather seats. SORTIMO shelving is installed in the rear, which has been used for emergency equipment and clothing. Unladen weight according to documents: 2270 kg. Permissible total weight: 2890 kg. Overall dimensions of this VW T4: Length 5107 mm / Width 1840 mm / Height with special signals 2100 mm (without the flashing lights, it is 1920 mm). Sliding door on the right and rear wing doors. Dent on the lower left rear. All doors function smoothly and without noise. WEBASTO AirTop 3500D auxiliary heater. Ball hitch with 2000 kg towing capacity (braked) or 750 kg (unbraked). Maximum towing weight = 4500 kg. 2.5-liter TDI five-cylinder diesel engine. 2461 ccm. 102 hp. AXL. Starts immediately and runs perfectly. 5-speed manual transmission. Differential lock. ABS. Power steering. Airbags for driver and passenger. Central locking with remote control. 2 original VW keys with remote control are included. Electric windows and electrically adjustable exterior mirrors. 155 km/h is listed as the maximum speed. The T4 was recently driven to us without any problems over 600 kilometers on the highway. It runs excellently and is in good original condition. The TÜV (technical inspection) is valid until 01/2027. This offer is only valid for commercial businesses and freelancers of all kinds, as well as for authorities / emergency services. Unfortunately, sales to private end consumers are not possible. Subject to prior sale and errors. Price according to §25a UStG (differential taxation; VAT cannot be shown separately and is not added). The Syncro is available immediately. Knjdpfoyyfr Sjx Andoa

Condition: excellent (used), functionality: fully functional, Saw in very good condition. Knsdpfxoy Tt Hde Andea Includes towing brake.

Condition: excellent (used), Year of construction: 2013, operating hours: 55,200 h, functionality: fully functional, machine/vehicle number: A0035A0294, Machine type: TruPunch 3000-1300 (S11) TruPunch 3000-1300 (S11), medium format 1250/2500 We are the first and only owner of the machine. Machine with complete history and service documentation. Machine is in fully working order and in continuous operation. Technical data: Width 6500 mm Depth 6203 mm Height 2252 mm Max. punching sequence (E = 1 mm) 1000 1/min Max. punching sequence – marking 2500 1/min Punching mode, X-axis 2500 mm Punching mode, Y-axis 1250 mm Max. sheet thickness 6.4 mm Max. workpiece weight 160 kg Max. punching force 180 kN Multitool tool change time 0.3 sec Number of tools/sheet clamps | 18 pcs / 2 pcs Max. part size, part flap when punching 500 mm x 500 mm Max. part size, rigid slide for punching (with sliding table) 80 mm x 50 mm Average power consumption with active automatic shutdown 0.3 kW Average power consumption during production 5.6 kW Additional, non-standard machine equipment: 1) Thread forming function with thread counter and thread forming tool damage control: chip-free thread forming is possible in both structural steel and stainless steel and aluminum. The threading tool is mounted like all other tools in the head. Thread size to be machined ranges from M 2.5 to M10. A thread sensor enables control of the threading tool damage. User-friendly operation, including lubricant level control. 2) Marking/surface embossing function: fast marking using appropriate tools. High-quality knurling can be performed at high speed. 3) Lowerable die: the lowerable die enables scratch-free processing because it moves downward when positioning the sheet metal. 4) Additional clamping device: recommended for processing very thin sheets and when using roller tool machining technology. An additional 2 clamping devices can be installed. In combination with the SheetMaster Compact, a third clamping device is recommended. 5) 3 x Option - vertically movable clamping device: the clamping devices move vertically (maximum stroke 12 mm); enables direct processing of the sheet metal at the clamping devices. This option reduces scratches from high forming dies. Ksdpszd U D Nefx Andena 6) Sensor in the slide for small parts: control of the slide for small parts (included in the "Nibbling-free machining" option). 7) Second locating pin: the pin is located on the outside on the right side. 8) RTC tool cassettes: 17 tool cassettes with die plates, enabling quick machine retooling. 9) Brush table with unloading and loading assistance: a brush table is recommended for processing particularly delicate materials. Vertically moving balls embedded in the table facilitate the loading and unloading process. We invite you to contact us.

Condition: ready for operation (used), Year of construction: 1967, A Winkler + Dünnebier envelope printing machine is available. Envelope type: peel & seal gumming, format range side seam min./max.: 114mm x 150mm/330mm x 450mm, format range center seam min./max.: 114mm x 150mm/230mm x 450mm, paper weight range: 70g-165g/m², production output: 250 envelopes/min. Including vacuum pump and blow air pump. Documentation available. On-site inspection is possible. Kodpfxsvva Hqj Andena

Year of construction: 2011, condition: ready for operation (used), A Prima Power CO2 laser cutting system is available. 1) Prima Power Platino 1530, year of manufacture: 2011, travel X/Y/Z: 3000mm/1500mm/150mm, rapid traverse: 100m/min, position accuracy: 0.03mm. 2) Prima Power CP 3000, year of manufacture: 2010, laser power: 3000W, power stability: +/- 2%, wavelength: 10.6µm, laser diameter: 19mm, dimensions X/Y/Z: approx. 900mm/3100mm/900mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Available from Q1 2025. Knedpfx Aot Nhm Iondsa

Year of construction: 1996, condition: ready for operation (used), A complete liquid egg and egg product pasteurization plant by Südmo/KMA is available. Main processes: egg breaking, filtration, pasteurization, cooling, homogenization. 1) Sanovo Type 3000 egg breaking machine, year of manufacture: 1991. 2) Südmo/KMA K21-FS/4235 pasteurization plant, year of manufacture: 1996, medium: liquid egg, throughput: 1500l/h, temperature profile: 15°C/64°C/6°C, cooling medium: ice water, ice water temperature: 1°C, ice water demand: 7500l/h, heating medium: hot water, hot water temperature: 65°C, hot water demand: 5000l/h, heat recovery: 70%, holding time: 360s. 3) APV Gaulin homogenizer. 4) Terlet process tank, volume: 10m³. 5) Clivet WSAT-XIN 30.2 water chiller, year of manufacture: 2018, refrigerant: R-410A, refrigerant charge: 9kg. Including pumps, agitators, tanks and additional accessories. Documentation available. An on-site inspection is possible. Knjdpfxjzidh Io Andja