Used Metos Four Icombi Mixed 10X 1/1 Gn for sale (80,648)

Condition: used, axle configuration: 1 axle, first registration: 01/2000, tire size: 8.25R16, color: green, Year of construction: 2000, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 1 axle, BPW axles, tarpaulin, front support, rear support. Ppodsi Rph Sepfx Adwjw Superstructure: Plastic water tank, 1000 liters, ex-German Armed Forces! Inertia brake! All information is provided without guarantee! ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: used, empty load weight: 5,980 kg, maximum load weight: 26,020 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 05/2008, loading space length: 7,500 mm, loading space width: 2,340 mm, loading space height: 1,450 mm, loading space volume: 25 m³, suspension: air, tire size: 385/65R22.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, air suspension, ABS (anti-lock braking system), catwalk, tailgate, underrun protection, chute. Body: steel tipper body approx. 25 m³, 2 x 9t BPW axles, drum brakes! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Podsyx Iugspfx Adwspw

Condition: new, first registration: 01/2022, empty load weight: 2,600 kg, color: black, driver cabin: other, gearing type: other, Year of construction: 2022, Vehicle location: Bovenden, hydraulic transverse locking system. Pedei Rmmvspfx Adwspw Body: 20-ton roll-off system for containers from 4.5m to 6.8m, hook height 1,570mm, Titan version, hydraulic combination container locking system (inside and outside), mechanical hook locking system, protective cover made of plastic over the control block, pneumatic driver's cab operation, complete fast gear, oil tank delivered with 2" hoses & connection material, 84l standard pump, mounting kit for 14 mm screws (resistant to shear forces), device length: 5,700mm! 4. Control block for additional hydraulics. Additional cost for retrofitting a radio system: EUR 6,000.00 Underrun protection available at an extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, first registration: 01/2022, empty load weight: 2,600 kg, color: black, driver cabin: other, gearing type: other, Year of construction: 2022, Vehicle location: Bovenden, hydraulic transverse locking system. Body: 20-ton roll-off system for containers with a hook height of 4.5 m to 6.8 m, 1,570 mm, Titan version, hydraulic combination container locking system (inside and outside), mechanical hook locking system, protective cover made of plastic over the control unit, pneumatic control from the driver's cab, complete fast-gear system, oil tank supplied with 2" hoses & connection material, 84 l standard pump, mounting kit for 14 mm screws, device length: 5,700 mm! 4. Control unit for auxiliary hydraulics. Pedpoi Rmnpefx Adwspw Surcharge for radio retrofit: 6,000.00 EUR. Underrun protection available for an extra charge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, mileage: 1,001 km, driver cabin: other, gearing type: other, Vehicle location: Bovenden. Superstructure: 10 AVAILABLE! Depending on size and condition, prices range from 500 to 900 EUR! – ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Pjdpji Rmwijfx Adwopw

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, TECHNICAL DETAILS Pressing force: 315 t Table width: 1,500 mm Table length: 2,500 mm Max. working area: 883 mm MACHINE DETAILS Dimensions: 3.0 m x 1.6 m x 4.5 m EQUIPMENT Separate hydraulic power unit Control panel Pedoy Nbtkspfx Adwjpw

Condition: refurbished (used), Year of construction: 2015, SPITZENBERGER & SPIES Bordnetzsimulation Supply Simulation System PAS 15000/GN/KFZ/OPD The device is from VW. Update: Device overhauled by the manufacturer. As pictured. According to specifications, the following tests can be carried out: Ppedswg Rzfspfx Adwjw Audi BDM LAH XXX.915.181.XX ISO 7637-2 ISO 16750-2 ISO 21848 LV 124 SAE J 1113-11 VW TL 80101 VW TL 82066 VW TL 82366 Among others, the following components are installed: Power Supply NT 15000/GN/Kfz SyCore 2-Quadrant Amplifier PAS 15000/GN/Kfz Overvoltage Protection Device OPD 15000/GN/Kfz The instruction manual can gladly be sent by email in advance. Viewing welcome. Also see my other measurement and test equipment offers.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe Pedpfx Asy Uiyvsdwjpw The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: used, This listing is for the Vickers Microplan 10X Microscope Ppodoxhfduspfx Adwew The unit is in full working condition and is ready for immediate use Description: Vickers Microplan 10× Microscope Objective This is an objective lens—part of a microscope optical system—rather than an entire microscope unit. The specific lens in question is marked "Vickers England MICROPLAN 10/0.25 + PH.1", indicating a 10× magnification and a numerical aperture (NA) of 0.25. The “PH.1” denotes that it includes phase-contrast capabilities Typical length around 37–39 mm, and weight in the range of 58–63 g Usage and Value These objectives, with their phase-contrast capability, were designed to be used with microscopes that support such optical techniques. This objective would typically fit an RMS-threaded turret, common in Vickers, Cooke‑Baker, or similar stands The phase ring (PH.1) allows enhanced imaging of transparent specimens, by shifting phase differences into contrast—ideal for biology or unstained sample observation.

Condition: excellent (used), Year of construction: 2008, = Further information = Podpfx Adox Ii Tpewopw Year of manufacture: Aug. 2008 Model year: 2008 Unladen weight: 5,100 kg Payload: 39,800 kg Gross vehicle weight: 44,900 kg Technical condition: Very good Optical condition: Very good Please contact Arne Honingh for more information.

Condition: good (used), KSB Pump Etaline GN 065 - 160/114 Ppodpfxsivd Dke Adwow Inline pumps and three-phase standard motor with motor-mounted frequency converter for stepless speed adjustment. Areas of application: Heating systems Air-conditioning systems Cooling circuits Domestic hot water systems water supply industrial circulation systems Materials to be pumped Fluids that do not chemically or mechanically attack the pump materials. Operating data 1450 min Design Close-coupled pump in in-line design, with variable-speed standard motor, pump shaft and motor shaft are rigidly connected. Bearings Deep groove ball bearing grease lubricated. Shaft seal uncooled and maintenance-free mechanical seal according to EN 12 756 Drive surface-cooled three-phase standard motor with motor-mounted frequency converter and radio interference filter according to DIN EN Pump series: Etaline Material combination: cast iron Standard motor and stub shaft Size designation: 65 Nominal width suction/ discharge 160 Item condition: used

Condition: good (used), KSB Pump Etaline GN 080-210/404 G11 Inline pumps and three-phase standard motor with motor-mounted frequency converter for stepless speed adjustment. Areas of application: Heating systems Air conditioning systems Domestic hot water systems water supply systems industrial circulation systems Materials to be pumped Fluids that do not chemically or mechanically attack the pump materials. Operating data Q to see data sheet H to see data sheet For the data of this pump, please refer to the data sheet 1) The sum of inlet pressure and delivery head at zero flow must not exceed the specified exceed the specified value Design Close-coupled pump in in-line design, with variable-speed standard motor, pump shaft and motor shaft are rigidly connected. Bearings Deep groove ball bearing grease lubricated. Shaft seal uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: cast iron Pedpfx Aoiu U Txedwspw Standard motor and stub shaft Size designation: 80 Nominal width suction/ discharge 210 For further technical data, please refer to the data sheet. Item condition: used Scope of delivery: 1 x KSB pump Etaline GN 080-210/404 G11

Condition: good (used), KSB pump Etaline GN 050-160 / 074 G10 Inline pumps and three-phase standard motor with motor-mounted frequency converter for stepless speed adjustment. Applications: heating systems air conditioning Water systems water supply industrial circulation systems conveyed Liquids that do not attack the pump materials chemically and mechanically. operating data Q 17,50 m3 / h H 5.8 m Further data of this pump can be found in the data sheet 1) The sum of inlet pressure and delivery head in the zero point of quantity may be said to Do not exceed the value execution Block pump in inline design, with variable-speed standard motor, pump and motor shaft are rigidly connected. Pedped Sqkzofx Adwepw camp Deep groove ball bearing grease lubricated. shaft seal uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: gray cast iron Standard engine and stub shaft Size designation: 65 Nominal diameter suction / discharge connection 160 Further technical data can be found on the data sheet. Item condition: used Scope of supply: 1 x KSB pump Etaline GN 050-160 / 074 G10

Year of construction: 2011, condition: new, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 9,000 mm/min, Electric cable hoist i=28 New in original packaging as a parts carrier or for installation, see pictures GDR3 H12 Motor ZBR100 B4 B050 Pedpfxjvylhbj Adwjpw

Condition: excellent (used), Year of construction: 1988, Manufacturer: Agostino Colombo Model: G 1600 Year: 1989 Condition: Used Ppsdpfsxnx Hiex Adwow Stock number: 0386 Press force: 1600 tons Number of pressure points: 2 Ram stroke: 135 mm Ram adjustment: 20 mm Die height from die holder cbra: 635 mm Die holder table size: 1,060 x 900 mm Lateral passage in the frame: 400 mm.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, maximum load weight: 7,000 kg, working height: 1,750 mm, The gas nitration vacuum oven is made up of all the steps involved in gas nitration, carburizing, and tempering. The machine is in very good condition. Ppodpsu T N Efjfx Adwew

Condition: new, Centrifugal pump Manufacturer: KSB Type: Etabloc-GN 50-125/302 GN11 Podohtlmnopfx Adwspw Capacity: 50 m3/h 2900 rpm Lifting height: 13 m Weight: 62kg It is complete - with motor!

Condition: excellent (used), VMI SPI 280 Av Mixer Stainless steel Complete with 1 mixing bowl Nice clean mixer In very good condition Psdpfozcrm Hex Adwjpw

Condition: excellent (used), functionality: fully functional, SHIPPING AVAILABLE 🚚 - Brand: Graco - Reference: G45C19 - General industry - Application: Solvent-based and water-based paint, medium and high pressure - Maximum flow rate: 3.03 l/min - Maximum working pressure: 276 bar - Pressure ratio: 45:1 Ppjdpfev Ta Shsx Adwsw - Includes new hose, gun, and nozzle - Graco PerformAA 5000 gun - 7.5-meter high-pressure air and fluid hoses - Graco LP515 nozzle - Fully inspected pre-owned product - 1-year warranty - Shipping or in-store pickup available - 21% VAT not included

Condition: good (used), Year of construction: 1991, I sell the heavy duty fourside moulder Weinig Unimat 17 Feeding speed 6,5 - 49 m/min. Working width 170mm Working height 130mm 7 spindles (6+Universal) Configuration: bottom - right - left - right - top - bottom (motor missing) - universal Total power apprx. 33kW Pedpfxsf Rtgko Adwspw Incl. Moulding heads and accessories on photos. Machine suitable mostly for wooden facing, parquettes and floors production. Fully working! Sellable immediately Deffects: broken entry table (can be underlaid like on the photo) 1 pc. Motor for spindle nr. 6 missing

Condition: used, This listing is for a Grant Instruments PV-1 Vortex Mixer Ideally sized for personal use, the Grant-bio PV-1 vortex mixer is compact, with a low profile and small footprint, to sit in almost any location. The PV-1 is so small that it will fit in your hand – yet there is no compromise on performance. The reliable motor produces regulated and reproducible agitation throughout the speed range. It is also extremely quiet. With variable speed from 750 to 3000 rpm, the PV-1 can be used for gentle through to vigorous mixing and pellet resuspension in 0.5mL, 1.5mL, and 15mL tubes. Adjustable speed control: 750 to 3000 rpm ‘Continuous’ or ‘touch’ operation For tubes up to 20 mm diameter Pressure sensitive cup accommodates tubes up to 20mm diameter Reliable and extremely quiet motor produces regulated and reproducible agitation throughout the speed range Extremely easy to operate – select either ‘continuous’ or ‘touch’ operation and turn the knob to adjust the speed from 750 rpm to 3000 rpm In ‘touch’ mode, agitation starts in response to pressure on the pressure sensitive cup. Ppodpsxzg Eyefx Adwow Exceptionally compact with a low profile and small footprint – fits into almost any location Rubber suction pads hold tight to the work surface and prevent the unit from ‘walking’ – they also absorb vibration and prevent its transmission to the workbench

Condition: new, 10x15m storage platform, load: 500kg/sqm lower edge: 2.5m, approx. 150sqm system platform Data : - Length : approx. 10m - Width : approx. 15m - Lower edge of platform : approx. 2.5 m - Top edge of stage : approx. 2.88 m - Total area : approx. 150 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, natural top, white bottom. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 12 x C profile 5000 mm , sendzimir galvanized . - 40 x S profile 4800 mm , sendzimir galvanized . - 12 x support 2500 mm , RAL 7016 . - 03 x dome strut 2517 mm , RAL7016 . - 70 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 12 x Lining plates for supports . - 12 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TAILORED TO YOUR REQUIREMENTS. Price : 18.198 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Podjzpvutopfx Adwjpw Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 10x15m storage platform, load: 500kg/sqm lower edge: 3.0m, approx. 150sqm system platform Data: - Length : approx. 10m - Width : approx. 15m - Lower edge of platform : approx. 3.0 m - Top edge of stage : approx. 3.38 m - Total area : approx. 150 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 12 x C profile 5000 mm , sendzimir galvanized . - 40 x S profile 4800 mm , sendzimir galvanized . - 12 x support 3000 mm , RAL 7016 . - 03 x dome strut 3049 mm , RAL7016 . - 70 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 12 x Lining plates for supports . - 12 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TAILORED TO YOUR REQUIREMENTS. Price : 18.525 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : Ppodpfxozpvtie Adwow On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 10x10m storage platform, load: 500kg/sqm lower edge: 3m, approx. 100sqm, system platform Data : - Length : approx. 10m - Width : approx. 10m - Lower edge of platform : approx. 3.0 m - Top edge of stage : approx. 3.38 m - Total area : approx. 100 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 08 x C profile 5000 mm , sendzimir galvanized . - 28 x S profile 4800 mm , sendzimir galvanized . - 09 x Support 3000 mm , RAL 7016 . - 03 x dome strut 3049 mm , RAL7016 . - 47 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 09 x Lining plates for supports . Psdpfszpvr Sjx Adwspw - 09 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING QUOTATION TAILORED TO YOUR REQUIREMENTS. Price : 13.167 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Year of construction: 1977, condition: good (used), machine/vehicle number: TH2001/0171-0173, DEMAG KBK crane canopy crane runway with dimensions approx. 10x7m (7m bridge) This crane is available several times ! Payload / lifting capacity 500 KG - 0,5to Technical data of the system: Crane runway made of Demag KBK1+2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/supports etc. incl. 500Kg steel chain hoist - lifting height approx. 3.5m Crane is dismantled and immediately available Pjdpfx Adevdnivowspw Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.