Used Mori Seiki Nh4000 Dcg for sale (638)

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, year of manufacture 1996. Model: SH-50 Serial number: 450 The machine is still under power and available at short notice. • P8 Power Supply worth €1,500 was newly replaced in August 2024 • The spindle was repaired in 2017 and, since then, has mostly been used in single-shift operation, as we primarily produce single parts and small batches. For this reason, the machine has spent most of its time being set up. Rcodpfoyt Nnpox Amgeb • Machine: Milling machine Mori Seiki SH50 • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Configuration: Horizontal milling machine with indexing table • Tool capacity: 60 (BT40) • Number of pallets: 2 (500mm x 500mm) • Travels: X630mm / Y600mm / Z650mm • Spindle speed: 12,000 rpm • Chip conveyor Known defects: Rapid traverse speed of the X axis has been reduced by 20% to extend the life of the telescopic covers. The sealing ring on the pallet changer is likely defective, leading to oil leakage. As a temporary fix, we installed a ball valve in between; when we need to change pallets (which is not very often), we open it manually. The machine is sold as viewed, without any guarantee or warranty. Any liability for defects, including hidden defects, is excluded to the extent permitted by law. If you have any questions or need further information, please feel free to write us a message or call us.

Condition: used, Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 579 mm, turning length: 510 mm, turning diameter: 356 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, spindle motor power: 15 W, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 30,000 m/min, Used CNC lathe Mori Seiki NL2000Y-500, year 2007, equipped with CNC control Mori Seiki MSX-850III. The machine is complete with Y-axis, interpolated C-axis, 12-position live turret, and tailstock. Main features: • Max turning diameter: Ø 356 mm • Max turning length: 510 mm • Bar capacity: Ø 65 mm • Axis travels X/Y/Z: 260 / +/-50 / 590 mm • Spindle speed: 5,000 rpm • Live tool speed: 6,000 rpm • Spindle power: 11/15 kW Redsy R D Aqspfx Amgjcb • Spindle ASA-A2-6 • Minimum C-axis angle: 0.001° Machine equipped with: • Chip conveyor • Coolant tank with pumps • Nr. 4 live tool holders (2 radial + 2 axial) • Various fixed tool holders • Automatic tool presetting arm • Manuals, electrical schematics, and CE/EU Declaration

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machining centre Mori Seiki Type NV5000 Year 2006 3 phases Rcodpsy Hq Rgefx Amgsb CNC Fanuc

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Offered here is a lathe from the manufacturer Mori Seiki, featuring twin turrets, a C-axis, and driven tools. The machine is in very good condition and can be inspected and tested at our facility. The scope of delivery includes 4 driven tool holders. Manufacturer: Mori Seiki Model: NZL 2000/600MC Year of manufacture: 2010 Control: MSX-853IV Technical data: Travel X1, Z1: 225 x 650 mm Travel X2, Z2: 170 x 650 mm Rapid traverse X1, Z1, Z2: 30,000 mm/min Rapid traverse X2: 25,000 mm/min Power chuck: Kitagawa N-08 JAPAN Chuck size: 200 mm Main spindle power: 15/22 kW Max. spindle speed: 5,000 rpm Driven tool spindle power: 3.7/5.5 kW Max. driven tool speed: 10,000 rpm Number of tools, upper turret: 12 (all driven) Number of tools, lower turret: 8 Rated power: 51 kVA Chip conveyor tank capacity: 400 l Rcjdpey Hhvtofx Amgeb Total weight: 7,000 kg

Condition: used, Year of construction: 2005, Technical details: turning diameter: 356 mm turning length: 705 mm control: MSX 850 MAPPS II swing dia.: 755 mm standard turning diameter: 275 mm travel -x axis: 260 mm travel -y axis: 100 (+-50) mm travel -z axis: 795 mm rapid travel - longitudinal/face: 30 / 30 m/min rapid traverse Y-axis: 10 m/min Rapid travel B-axis (parts transfer subspindle): 30 m/min Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5/18,5/15 kW Spindle 1 max. bar diameter: 80 mm Spindle 2 RPM: 6000 1/min Spindle 2 power: 11 / 7,5 kW turret stations / rotary tool stations: 16 / 16 VDI 30 : 5.5/5,5/3,7 kW speed of driven tools: 6000 1/min total power requirement: 39,2 kVA weight of the machine ca.: 6,2 t dimensions of the machine ca.: 3,1 x 2,0 x 2,2 m Accerories Rcjdpfxjy H R D Ts Amgeb Chip conveyor Spindle 1 Chuck Kitagawa B 210 (250 mm) Spindle 2 Chuck Kitagawa B 206 (160 mm) High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by MAPPS II Control. *

Condition: ready for operation (used), Year of construction: 1998, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 2000 mm Y-AXIS TRAVEL: 1300 mm Z-AXIS TRAVEL: 1200 mm SPINDLE: 60-6000 rpm; 30-37 kW; ISO 50 - BT PALLET: N.2 ; 1000X1000 mm MAX ADMITTED LOAD: 3000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 120 POS CONTROL UNIT: MSC 502 WEIGHT: 35200 Kg OVERALL DIMENSIONS: 5330 x 7720 x 3810 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; Rodpeyvlx Djfx Amgscb RS 232 SERIAL PORT ; TOOL SETTER NOTE: MAX PIECE DIAMETER 2000 mm; MAX HEIGHT 1550 mm; MAX WEIGTH 3000 Kg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki MV-40B/40 Machining center is immediately available and inspection under power is possible; the condition is very good. We also offer on-site commissioning. - 4 axes - Niken CNC-200 FA rotary table - multiple SK 40 tool holders - spindle internal cooling (IKZ) Rcodpsy Hrapjfx Amgob - Knoll system - extraction unit - FANUC 16M control

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, bar passage: 65 mm, bar diameter (max.): 65 mm, We are offering this ready-to-use Mori Seiki NTX1000 CNC turning and milling center, year of manufacture 2011. Manufacturer: Mori Seiki Model: NTX1000 Year of manufacture: 2011 Condition: ready for operation Category ID: 1128 Type ID: 2239 Machine type: CNC turning and milling center Rjdpfxoy Hrhae Amgjcb Bar capacity: 65 mm FMB bar feeder 3 m Extended tool magazine with 75 positions Chip conveyor with drum filter Knoll high-pressure system 70 Bar Renishaw probing system Numerous tool holders If you have any questions or require more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,093 h, functionality: fully functional, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, controller model: MITSUBISHI M-720BM (MAPPS 2), counter spindle speed (max.): 5,000 rpm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Main Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Counter Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Milling spindle speed: 0 - 12,000 rpm Tool holder: Capto C6 Tool stations: 100 positions Hollow clamping device: 67 mm MACHINE DETAILS Control unit: MITSUBISHI M-720BM (MAPPS 2) Operating Hours Operating hours: 26,875 h Spindle hours: 16,093 h EQUIPMENT Y-axis Fully indexable B-axis Chip conveyor, discharge right Standard coolant system Interface for high-pressure coolant system, 70 bar Tool spindle with through-spindle cooling Coolant spray gun Blow air through sub spindle Manual tool presetting on main spindle 3-color signal tower Double foot switch Simultaneous 5-axis machining Automatic power off Tool offset for 5-axis machining Programmable data input Redpfx Amoy Eydysgocb Dynamic interchange diameter/radius Stroke check prior to movement

Condition: ready for operation (used), Year of construction: 2012, operating hours: 4,299 h, functionality: fully functional, machine/vehicle number: 15995726904, spindle motor power: 20 W, spindle speed (min.): 24,000 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, Machine equipped with an integrated 4th axis by TSUDAKOMA. Rodpfjy D I R Eox Amgscb

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 71, turning length: 360 mm, turning diameter: 440 mm, spindle speed (max.): 5,000 rpm, bar passage: 45 mm, controller model: Fanuc 18iTA, TECHNICAL DETAILS Turning diameter: 440 mm Turning length: 360 mm Spindle speed: 50 - 5,000 rpm on both spindles Bar capacity: 45 mm Spindle nose: ASA A2-5 C-axis: 0.001 on both spindles Rjdoy E Hpispfx Amgscb MACHINE DETAILS Control: Fanuc 18iTA Upper turret: 12 driven stations Lower turret: 12 driven stations Main spindle: 11 / 7.5 kW Sub spindle: 7.5 / 5.5 kW EQUIPMENT Chip conveyor Parts catcher Bar loader interface Bar loader: LNS Mini-Sprint S2 42/3M

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, X-axis travel: 140 mm Y-axis travel: +/- 40 mm Z-axis travel (1+2): 450 / 410 mm Turning length: 750 mm Turning diameter over cross slide: 250 mm Turning diameter: 190 mm Distance between centres: 750 mm Max. bar diameter: 52 mm Spindle speed (max.): 4,000 rpm Main spindle speed range: 60 - 6,000 rpm Drive power - main spindle: 22 / 18.5 kW Max. torque: 198 Nm Counter spindle B-axis travel: 525 mm Feeds Feed rate X (1+2): 18,000 mm/min Feed rate Y: 6,000 mm/min Feed rate Z (1+2): 24,000 mm/min Feed rate B: 24,000 mm/min Number of turrets: 2 Number of tool stations: 2x 16 pos. Shank height for square tool: 20 mm Shank diameter for drills: 25 mm Turret indexing time: 0.2 s Tool holder: VDI 30 Speed range - driven tool stations (max.): 6,000 rpm Drive power - driven tool stations: 5.5 / 3.7 / 2.2 kW Rcjdjyyupmopfx Amgob Rapid traverse X (1+2): 18 m/min Rapid traverse Y: 6 m/min Rapid traverse Z (1+2): 24 m/min Rapid traverse B: 24 m/min Rapid traverse C: 400 rpm MACHINE DETAILS Control: MSX 501 Fanuc drives Machine is in excellent condition

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Rcedpfxey Edc Hs Amgjb Bar capacity: 52 mm Turn-mill spindle Full indexing specifications: Yes X-axis travel: 380 mm Y-axis travel: ±105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ±120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: Ø70/Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower Turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool stations: 10 Tool rotational speed: 6,000 min⁻¹ Driven tool power: 1.5/1.2 kW Main Spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Sub Spindle Spindle speed: 1,000 rpm BW axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang to conveyor, if equipped) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated output: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Powered on: 54,061 hours Spindle 1 operating hours: 9,813 hours Spindle 2 operating hours: 5,002 hours EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blower outside the spindle Foot switch (double) for main and sub spindle

Condition: good (used), Year of construction: 1999, 4-axis CNC lathe with sub spindle and 2 turrets Control: Fanuc 18iTA Upper turret: 12 driven stations Lower turret: 12 driven stations C-axis: 0.001° on both spindles Rjdpfx Ajy Enhmsmgscb Main spindle: 11 / 7.5 kW Sub spindle: 7.5 / 5.5 kW Spindle speed: 50 - 5,000 rpm on both spindles Bar capacity: 45 mm Spindle nose: ASA A2-5 Turning diameter: 440 mm Turning length: 360 mm Chip conveyor Parts catcher Bar feeder interface Bar feeder: LNS Mini-Sprint S2 42/3M

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 462, turning length: 500 mm, turning diameter over cross slide: 250 mm, turning diameter: 250 mm, spindle motor power: 7,500 W, spindle speed (min.): 3,500 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 56 mm, travel distance X-axis: 150 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, rotational speed (max.): 3,500 rpm, bar diameter (max.): 56 mm, overall weight: 2,800 kg, turning diameter over bed slide: 310 mm, Equipment: documentation/manual, For sale: MORI SEIKI horizontal lathe - Model: FRONTIER L1 - Machine No.: 462 - Controller: FANUC – MSC 521 Rcedpoy Ibx Rsfx Amgsb - Year: 7/1996 The machine has been regularly serviced and maintained, precise, and in excellent condition. It was used for toolmaking jobs in small batches of up to 50 pieces, flawless and accurate. It is connected to the power supply and ready for immediate operation.

Condition: used, Year of construction: 1998, Technical details: x-travel: 630 mm y-travel: 600 mm z-travel: 650 mm control: MSC 502 (Fanuc 16) Spindle RPM: 12000 1/min spindle drive: 22 / 18,5 kW rapid travel x/y/z: 32 m/min Pallet dimension: 500x500 mm numbers of pallets: 2 table load: 0,5 t working diameter: max. 610 mm Number of tool station: 60 BT40 max. tool length: 360 mm max. tool weight: 12 kg tool changing time: 1,3 sec B-axis positioning (non continuous): 1 total power requirement: 50 kVA weight of the machine ca.: 14 t dimensions of the machine ca.: 3,3 x 5,8 x 3,2 m Accerories Chip conveyor spindle load monitor Typ C Coolant gun Chamfering and corner rounding Tool life management Interface for coolant through the spindle This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options: ATC 60 tool stations, High pressure coolant trough spindle interface, Rodpfx Amjy Er Tgjgocb *

Condition: ready for operation (used), Year of construction: 2008, operating hours: 3,858 h, functionality: fully functional, turning length: 705 mm, turning diameter: 275 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, controller model: MSX-850III, TECHNICAL DETAILS Travel X-axis: 260 mm Travel Z-axis: 795 mm Turning length: 705 mm Max. turning diameter: 275 mm Swing over bed: 923.8 mm Swing over cross slide: 755 mm Bar work capacity diameter: 80 mm Upper turret Number of tool stations: 12 Main spindle Spindle speed: 4,000 rpm Spindle drive power: 18.5/18.5/15 kW (10 min/30 min/cont) Spindle nose: JIS A2-8 Tailstock Tailstock travel: 734 mm Taper: MT5 MACHINE DETAILS CNC control: MSX-850III Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,922 x 2,120 mm Weight: 5,800 kg Operating Hours Main spindle hours: 3,858 h Redpfx Aeyz Aq Ismgocb Power-on hours: 21,543 EQUIPMENT Chip conveyor Tool measuring arm

Condition: ready for operation (used), Year of construction: 2000, operating hours: 2,981 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,035 mm, spindle motor power: 18,500 W, overall weight: 5,600 kg, controller manufacturer: FANUC, controller model: MSG-501 MAPPS, number of axes: 3, This 3-axis MORI SEIKI SL-253B MC/1000 was manufactured in 2000. It features a maximum turning diameter of 260 mm and a turning length of 1,035 mm. The machine is equipped with a spindle speed range of 35–3,500 RPM and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-253B MC/1000 horizontal turning machine we have for sale. Contact us for further details. • Max turning diameter: 260 mm • Max turning length: 1035 mm • Spindle nose/bore: JIS A2-8 / 86 mm • Bar capacity: 74 mm • Rapid traverse (X/Z): 18 / 24 m/min • Live tooling (BMC): 3,000 RPM / 6.5 kW • Tailstock: MT 5, 150 mm stroke • Control: MSG-501 MAPPS (Fanuc) • Turret: 12 station VDI 40 Rcjdpfxsy D Rnyo Amgjb Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), functionality: fully functional, Fixed tool holders Machine: MORI SEIKI SL2000 Turret manufacturer: SAUTER ---- 2x→ No. 444-119 Turning Tool Holder 25 mm steel holder Fixed turning tool holder Price: on request ----- 1x→ No. 444-201 Double Turning Tool Holder for main spindle and sub spindle with 1x clamping bar for 25 mm tool steels Fixed turning tool holder Price: on request ----- 1x→ No. 444-210 Boring Bar Holder Cylindrical mount ø 32 mm second mount ø 32 mm; 57 mm to the rear Price: on request ----- Rcedpfsynb E Nex Amgjb 1x→ No. 444-205 Turning Holder Mount 25 mm steel holder Price: on request

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 1 Rodpfjx Tvklox Amgocb - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8 - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. bar diameter : 80 [mm] - Max. machining length : 728 [mm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/795 [mm] - Y stroke : +/- 50 [mm] - Tool type : BMT - Live tools speed : 10000 [rpm] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM5 - Tailstock stroke : 650 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 39 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.110 x 1.922 [mm] - Machine height : 2.120 [mm] - Machine weight : 6.100 [kg] MACHINE HOURS - Number of hours under power : 26654 [h] - Number of working hours : 15488 [h] EQUIPMENT - CNC : CELOS - Interactive programming : MAPPS 4 - Interface : USB, PCMCIA, RJ45, RS232 - Tool probe : Renishaw - Coolant tank * with high-pressure pump : 15 [bars] - Chips conveyor - Tool probe - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD SERVO 80 S2 - Number of fixed tool holders : 9 - Number of turning tool holders : 3 - Electric transformer - Collet chuck

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1428, turning length: 490 mm, turning diameter over cross slide: 680 mm, turning diameter: 300 mm, spindle motor power: 7,500 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 215 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 6,000 m/min, rapid traverse Z-axis: 24,000 m/min, rotational speed (max.): 6,000 rpm, feed length X-axis: 215 mm, feed length Y-axis: 70 mm, feed length Z-axis: 490 mm, bar passage: 45 mm, total height: 2,020 mm, total length: 2,320 mm, total width: 1,735 mm, overall weight: 4,200 kg, The machine has been regularly serviced, well maintained, precise, and is in excellent condition. It does not have a feeding device. It has been used for toolmaking jobs in batches of up to a maximum of 50 pieces. It is connected to the electrical network and ready for operation. Rcedpfx Aey E R Agemgsb

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: SL150CE2500, turning length: 490 mm, turning diameter: 300 mm, spindle motor power: 7,500 W, spindle speed (min.): 6,000 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 90 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 490 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 6,000 m/min, rapid traverse Z-axis: 24,000 m/min, rotational speed (max.): 3,000 rpm, rotational speed (min.): 3,000 rpm, total height: 2,020 mm, total length: 1,735 mm, total width: 2,320 mm, overall weight: 4,200 kg, Equipment: documentation/manual, The machine has been regularly serviced, well maintained, precise, and is in excellent condition. It does not have a feeding device. It has been used for toolmaking jobs in batches of up to a maximum of 50 pieces. It is connected to the electrical network and ready for operation. Redjy E Rwdepfx Amgecb

Condition: excellent (used), Year of construction: 2005, operating hours: 17,395 h, functionality: fully functional, machine/vehicle number: NV501EH3106, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, nominal power (apparent): 18 kVA, controller model: MSX501, total length: 2,710 mm, total width: 2,788 mm, table width: 1,320 mm, table length: 600 mm, rotational speed (min.): 20,000 rpm, rotational speed (max.): 20,000 rpm, overall weight: 8,060 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 380 V, Equipment: documentation/manual, The machine has been regularly serviced, well-maintained, and is in excellent condition. It is connected to the power supply and ready for operation. Equipped with a 30-tool magazine. Rcedpfx Amsy E Nvrsgjb

Condition: excellent (used), Year of construction: 2012, Technical specifications: 5-axis machine: X, Y, Z, C, B Travel distances (X/Y/Z): 500 / 450 / 400 mm Travel range B axis: +110/-5° Travel range C axis: 360° CNC control: SIEMENS 840D Table width: 500 mm Rcsdpoyzzpvefx Amgob Table diameter: 630 mm Table angle adjustable in degrees Max. workpiece weight: 200 kg Number of tool changer positions: 30 Spindle speed: 20 – 10,000 rpm Motor power: 13 kW Dimensions (L x W x H): approx. 3400 x 2550 x 2200 mm Machine weight: approx. 4.8 t Additional equipment: Workpiece measuring probe Chip conveyor Condition: Very good condition, little used, approximately 12,850 operating hours

Condition: excellent (used), Year of construction: 2005, x-travel 630 mm y-travel 600 mm z-travel 670 mm Control MSX 501 spindle turning speed - stepless 14000 U/min tool taper BT 40 Rcodpfx Ameygx D Tjgsb pallet chang. with pallet turn. 360x1 degree 2 max. workpiece weight 500 kg tool change unit 60 fach table-size 500 x 500 mm total power requirement 56 kW weight of the machine ca. 11,8 t dimensions of the machine ca. 5,8 x 3,6 x 3,0 m