Used Nmteh Megabender 030 for sale (1,081)

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Hnedszcf Dljpfx Ap Hsn Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: excellent (used), Mitsubishi Industrial 6-Axis Articulated Arm Robot Here we offer a Mitsubishi industrial 6-axis articulated arm robot. Hodpfxjzdyuao Ap Hsnn RV series industrial robots Compact and powerful, offering flexible automation and high reliability. The RV series provides a highly dynamic 6-axis articulated arm robot for maximum quality. Type: RV-3SDB-S15 Number of axes: 6 Maximum lifting capacity: 3.5 kg Reach radius: 642 mm Weight: 38 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Year of construction: 2026, condition: new, functionality: fully functional, power: 6 kW (8.16 HP), overall weight: 1,140 kg, positioning accuracy: 0.05 mm, table length: 3,000 mm, table width: 2,000 mm, number of axes: 3, Equipment: CE marking, documentation/manual, Big CNC router machine for a big production. With it, you can produce doors, cabinets, tables, chairs, gaskets, LED signs, souvenirs, and 3D relief on wood. Great choice for those who seek no limits. This machine is used for cutting and engraving wood, MDF, chipboard, acrylic, plexiglass, PVC, composite, and aluminum. Wattsan M1 2030’s planetary gears provide high speed, and the reinforced gantry and bed guarantee no vibrations during the work. Together, they provide precision. You can give our managers a call for additional details! Wattsan M1 2030 characteristics Working area: 2000x3000 mm Spindle: 6 kW Hsdpfsih Sdgsx Ap Hsnn Machine size: 2700x3540x1780 mm Weight: 860 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), Year of construction: 2023, 2023 Keyence IM-8030T Series Image Dimension Measurement System Image Sensor 1" 20-Megapixel Monochrome CMOS. Display 12.1" LCD Monitor (WXGA: 1,280 × 800mm). Receiver Lens Double Telecentric Lens. Field of View Wide-Field Measurement Mode 300 × 200mm (4× R50). High-Precision Measurement Mode 225 × 125 mm. Minimum display unit 0.1μm. Repeatability Wide-Field Measurement Mode Without Stage Movement ±1μm, With Stage Movement ±2μm. High-Precision Measurement Mode Without Stage Movement ±0.5μm, With Stage Movement ±1.5μm. Measurement Accuracy (±2σ), Wide-Field Measurement Mode Without Binding ±3.9μm, With Binding ±(7 + 0.02 L) µm, High-Precision Measurement Mode Without Binding ±2 µm, With Binding ±(4 + 0.02 L) µm. Outer Diameter Measurement Accuracy Wide-field Measurement Mode ±(2.8 + 0.02 D) µm, High-Precision Measurement Mode ±(1.4 + 0.04 D) µm*15. Light Probe Measurement, Measurable Area (XY) 190 × 90mm. Maximum Measurement Depth 30mm. Light probe Diameter ø3mm. Measuring Force 0.015N. Repeatability ±2 µm. Measurement Accuracy ±(8 + 0.02 L) µm. Height Measurement Unit- Measurement Range 0 To 75mm, Measuring Force 0.3N, Measurement Accuracy (XY) ±0.2 mm, Minimum Display Unit 1µm, Measurable Area (XY), Wide-Field Measurement Mode 145 × 95mm, High-Precision Measurement Mode 107.5 × 95mm, Repeatability ±2µm, Measurement Accuracy ±7.5µm.'X,Y'Stage (Electric) 200 x 100mm. Maximum Mass 7.5kg. 'Z' Travel 75mm. Voltage 240V. S/No. AC0N000263. NOTE: This item will be loaded to buyer's vehicle, a loading charge of £25 + VAT will be added to the buyer's invoice. Hnjdpfxszbr Saj Ap Hjn With Keyboard, Mouse & Test Piece. NOTE: This item will be loaded to buyer's vehicle, a loading charge of £25 + VAT will be added to the buyer's invoice.

Condition: good (used), machine/vehicle number: 2301, Year of construction: 2000, load capacity: 12,000 kg, lifting height: 5,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 4,660 mm, total width: 2,600 mm, operation weight: 15,300 kg, additional equipment features: Rear mud guards, Warning triangle, Manual sliding cabin, Dual tread, Front mud guards, Equipment: lighting, SveTruck 1260-30 from Uniktruck Wheel type – Drive wheel: Pneumatic Hnjdpjyuhmmjfx Ap Hjn Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 11.00x20 Wheel size – Steering wheel: 11.00x20

Condition: used, The K&S 8030 was a wire bonder, likely a specialized or less common variant. Based on the architecture of the 8000-series bonders, the typical specifications were approximately: Parameter Typical 8000-Series Capability Bonding method Thermosonic wire bonding Wire types Gold (Au), Aluminum (Al) depending on configuration Bond type Ball bonding or wedge bonding (model-dependent) Positioning Vision-assisted X-Y motion control Bonding area Typically 50–100 mm class work envelope Applications IC packaging, hybrids, chip-on-board, microelectronics Automation Programmable automatic bonding sequences Hnedozdgl Hepfx Ap Hsn

Condition: excellent (used), Heraeus Incubator Here we offer an incubator. Volume: 30 liters Manufacturer: Heraeus External dimensions: Height 552 mm x Width 552 mm x Depth 610 mm Internal dimensions: Height 231 mm x Width 352 mm x Depth 370 mm Nominal temperature: 50 °C Connection: 220V 50/60 Hz 1.00 A 0.22 kW Weight: approx. 41 kg Type: B 6030 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Hsdpfx Apjzdtiqo Honn We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 18,948 h, machine/vehicle number: A0215A0087, laser power: 2,000 W, sheet thickness steel (max.): 12 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 75 mm, No minimum price – guaranteed sale to the highest bidder! A maintenance checklist from December 2025 is attached! The defects listed there have been completely rectified (see attached activity report from Trumpf)! TECHNICAL DETAILS Working area X-axis: max. 3,000 mm Working area Y-axis: max. 1,500 mm Working area Z-axis: max. 75 mm Speed X: max. 60 m/min Speed Y: max. 60 m/min Speed Z: max. 60 m/min Simultaneous speed X/Y: max. 85 m/min Sheet metal thickness, steel: max. 12 mm Sheet metal thickness, stainless steel: max. 6 mm Sheet metal thickness, aluminum: max. 5 mm Workpiece weight: max. 575 kg MACHINE DETAILS Control system: B&R Arnco Laser type: TruCoax 2000 Laser power: 2,000 W Dimensions and weight Footprint (L x W x H): 7,400 x 3,300 x 2,300 mm Transport width: 2,464 mm Weight: 9,000 kg Electrical connection: 65 kVA Operating hours (as of December 17, 2025) Operating hours, laser: 18,948 h Laser beam on-time: 3,635 h EQUIPMENT Closed machine frame with integrated laser head Motion unit for high-precision machining Drives with maintenance-free three-phase servo motors Sheet metal support accessible from both sides Enclosed beam guidance Fully integrated cooling unit Traveling extraction system Collection container for falling parts under the working area Positioning laser diode Hnedpfx Aozdp Ntep Hen FocusLine

Condition: ready for operation (used), Siemens stator for 1FK6083-6AF71 servo motor, serial number: YFM210681703002, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hsdpfx Ajzdxkyep Hjnn

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 2950 mm swing diameter 3200 mm turning height 3500 mm table load 20 t feed range 3000 mm/min Hnodpfxszdrc As Ap Hjn main drive motor 70 kW milling drive 16,1 kW Additional information * CNC-control FAGOR 8070 * C-axis with 360,000 positions * Milling head Inspection under power in the factory possible. Machine location is Spain.

Condition: like new (used), Technical data: Drive motors/ motor Quantity: 6 pieces available Manufacturer: SEW Movimot Hnedpef N Hf Sefx Ap Hen Type: MM150-503-00 18215033 condition: used, unused Output: KW 1,5 Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods we are your competent partner! We would be pleased to make you an individual offer or advise you on the conception or installation questions. Just let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of experts. For companies in a wide range of industries, such as: logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully implemented projects. Together we will develop ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: good (used), machine/vehicle number: 2674, Year of construction: 1999, load capacity: 12,000 kg, lifting height: 6,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,300 mm, total length: 4,820 mm, total width: 2,500 mm, operation weight: 17,500 kg, additional equipment features: Dual tread, Warning triangle, Centralized greasing system, Fire extinguisher, Equipment: lighting, SveTruck 1260-30 from Uniktruck Wheel type – Drive wheel: Pneumatic Hnsdpfxsyuhqxe Ap Hon Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 11.00-20 Wheel size – Steering wheel: 11.00-20

Condition: good (used), Here we offer a PINK vacuum drying oven. PINK vacuum drying oven Space requirements for operation and maintenance: Width min. 3000 mm Height min. 2500 mm Depth min. 2500 mm Dimensions of the vacuum drying oven: External dimensions: Width approx. 1170 mm, Depth approx. 1380 mm, Height approx. 1615 mm Overall height 1970 mm Internal dimensions: Width approx. 360 mm, Depth approx. 735 mm, Height approx. 300 mm Volume of vacuum chamber 79 liters Operating temperature min. 20 °C, max. 150 °C Electrical connection: Supply voltage 3 x 400 V; 50 Hz, N / PE, 8.5 kVA Heating power 6 kW Cooling power 6 kW at 15 °C medium temperature and 15 °C cooling water temperature Hnsdpfjzdi Ivjx Ap Hon Heating: Floor, ceiling, side walls and door, double-walled; heat transfer medium flows through Heat transfer medium: Heat transfer oil Mobiltherm 32, filling quantity approx. 20 liters, depending on the length of the pipeline Compressed air: Pressure 6 bar Nitrogen N2: Pressure Nitrogen N2 pressure Permissible operating overpressure: Vacuum chamber -1 / +0.1 bar Heating system 3 bar Weight: 300 kg Type: PINK VT 300-600-300-1 Condition: used Scope of delivery: (PINK VT 300-600-300-1, operating manual) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), Year of construction: 2014, operating hours: 5,619 h, load capacity: 3,000 kg, lifting height: 6,040 mm, fuel type: electric, mast type: triplex, construction height: 2,725 mm, empty load weight: 6,000 kg, mileage: 5,619 km, TRIPLEX forklift, brand STILLYear of manufacture 2014 Capacity of 3,000 kg; Lifting height 6,040 mm; Equipped with FREELIFT; Equipped with SIDESHIFT and a fourth hydraulic function; Overall height 2,725 mm; 5,619 operating hours; NON MARKING tyres:2017 battery with external charger and automatic filling system; Schedule an appointment for a test drive;Watch the video on YouTube Hedow Tty Nopfx Ap Honn

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,350 kg, maximum load weight: 28,650 kg, overall weight: 33,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,400 mm, suspension: air, tire size: 385/65R22,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Further information Chassis, semi-trailer, tipper Fine-grained steel welded construction, lightweight design, kingpin plate with 2 interchangeable kingpins Curved front panel, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without slide-out mechanism 2 support wedges with holder Underrun protection, foldable Half-shell fenders Hjdpfoi Riziex Ap Henn Tarpaulin rod with holder 2 towing hooks at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned, reducing tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS, without installation in the truck (this must be available in the truck. Only for base tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("Flashing side marker lights") 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Dump body Aluminum box-type dump body made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external side walls made of 30 mm hollow profile, neatly welded, with top rail profile that prevents spillage. Interior with ladder on the front wall (not in connection with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline - conical and aerodynamic dump body shape Membrane - rear wall Rear wall as a swing gate with double-hinge hinge, externally mounted with 2-fold hook lock. Rear wall with rubber seal. Note! Heat-resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with ladder, connecting plate for air/electricity and brake with large space for best possible operation. Roll cover, single-sided for storage on the right side, with central locking on the left side Country of registration / signs Germany with DEKRA approval and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for license plate holder, single line Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau "10-year warranty against rust-through" Dump body RAL color, solid color Roll cover RAL 7035 light gray

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,230 mm, suspension: air, tire size: 385/65R22,5², tire condition: 100 %, Customized transport solution Configure according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. More information Chassis Fine-grain steel welded construction, lightweight design, fifth wheel plate with 2 interchangeable kingpins Curved front panel, patented Telescopic support in the center, uncoupling not possible while loaded; when uncoupled, the vehicle must be tilted backward. 2 chock blocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface repels stones With anti-splash flaps, only on the last axle 1 tarpaulin rod with holder 2 towing hooks at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles, off-road version Air suspension 1st axle, automatic lift axle, including forced lowering & start assist; activated 3 times via the brakes (start assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve Vehicle driving stability system Automatic tilting lowering + shut-off valve Wheels + Tires 385/65R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm Actuation via hydraulic system connected to the truck's auxiliary drive Tippers Aluminum tipper body made of high-quality, abrasion-resistant material, front panel 5 mm thick, with externally mounted side walls made of 30 mm hollow profile, neatly welded, with a top profile that prevents spillage. Inside with a ladder on the front panel. Shovel and broom holder on the outside of the front panel Greenline - tapered and aerodynamic tipper body shape Membrane - rear wall Rear wall as a hinged flap with double-joint hinge, mounted on the outside with a double hook lock. Rear wall with rubber seal. Note! Heat-resistant up to max. 170°C! Hedei Ri H Ijpfx Ap Hsnn Floor, continuous 6 mm thick Standing platform with ladder, connecting plate for air/electric and brake, with large clearance for best possible operation. Roll tarp, can be stored on the right side, with central locking on the left side. Operating instructions For transport of salt, lime, etc., we recommend a tilting cylinder with a hard-chrome plated piston rod to protect against rust. The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support/fifth wheel loads (poor driving and handling characteristics possible due to incorrect load distribution). Country of registration/signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single row Contour mar

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Hnsdpfszd Afzex Ap Hsn Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Condition: used, mileage: 342,081 km, power: 353 kW (479.95 HP), first registration: 05/2021, fuel type: diesel, tire size: 315/60 R22,5, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 5,800 mm, total width: 2,500 mm, total height: 3,300 mm, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electric window regulation, power assisted steering, second fuel tank, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Roof spoiler - Air conditioning - Air suspension - Radio/CD player - Spare tire - Sleeper cab - Immobilizer = Further Information = Suspension: Air suspension Front axle: Tire size: 315/60 R22.5; Steerable Rear tire size: 295/60 R22.5 Hedpfozcx Epjx Ap Henn Unladen weight: 7,403 kg APK (Periodic Technical Inspection): valid until 02/2027 Reference number: 72

Condition: used, Year of construction: 2011, Scissor lift – JLG 2030 ES Manufacturer: JLG Model: 2030 ES Year of manufacture: 2011 Technical data Working height: 8.10 m Platform height: 6.10 m Platform length: 2.24 m Platform width: 0.69 m Total weight: 2,020 kg Length: 2.30 m Width: 0.76 m Overhead clearance: 2.20 m Basket load capacity: 360 kg Outriggers: none Drive: Electric Special equipment Platform extension: 0.90 m with 360 kg Indoor and outdoor operation (outdoor for one person, max. 160 kg) Low-marking tires Folding guardrail, height 1.81 m Other: 4 new batteries (installed 04/2025) Driver's license class 3/B Dates/Information TÜV (technical inspection): not required UVV (accident prevention regulations): valid until: 09/2026 Mileage: not applicable Operating hours: 516 hours as of 02/2026 Price quoted plus statutory VAT. Are you interested? We are always happy to assist you! You can reach us from Monday to Friday between 7:00 AM and 4:00 PM. Subject to changes and errors! Hodoxfi Dgepfx Ap Hjnn

Condition: used, Year of construction: 2018, operating hours: 24,849 h, lifting height: 4,610 mm, free lift: 1,560 mm, fuel type: gas, mast type: triplex, fork length: 1,190 mm, fork width: 1,100 mm, total height: 2,200 mm, total length: 3,700 mm, total width: 1,180 mm, color: grey, Lifting capacity: 3.000 kg - Year: 2018 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 517387J00054 - Operating hours: 24849 - Lifting capacity: 3000kg - Lifting height: 4610mm - Overhead clearance: 2180mm - Free lift: 1560mm - Fork length: 1190mm - Maximum fork width: 1100mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Heating, Full cabin, Free-lift - Mast: Triplex - Inspection valid until: 12-2026 - Drive: LPG - Motor brand: Izusu - Transport dimensions: 3705mm x 1180mm x 2200mm (l x w x h) Hsdpfx Aeywt N Hjp Henn - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Hnedpezdiiujfx Ap Hon Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Condition: used, Heftkopf / Stitching Head Müller Martini HK45 0305.0400 Heftkopf / Stitching Head Müller Martini HK45 0305.0400 Hnodpfx Aozdr Dmsp Hon Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Heftkopf / Stitching Head Müller Martini HK 45 0305.0400 Serial-No. ET029 Hsdjzdrtbjpfx Ap Hsnn Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2011, 2x ARBURG A 170 S 180-30 Trennebene (S&P 3798) Manufacture year: 2011 Hjdpszdf S Sefx Ap Hsnn Operating hours: 38,396 Stunden Screw: 15 mm Injection pressure: 2200 bar Stroke volume: 10,6 cm³ Clamping Force: 18 t Tie bar distance: 170 x 170 mm Mould installation height min.: 150 mm Plate distance max.: 350 mm Dimensions: 2600 x 1400 x 2000 mm Eeight: 1720 kg Connected load: 11 + 4 = 15 kW price: on request Option parting line, hotrunner 6x, Robot Interface EM67, Interface Colorizing, corepuller, crane 350 kg Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 2011, Scissor lift – JLG 2030 ES Manufacturer: JLG Model: 2030 ES Year of manufacture: 2011 Technical specifications Working height: 8.10 m Platform height: 6.10 m Platform length: 2.24 m Platform width: 0.69 m Total weight: 2,020 kg Length: 2.30 m Width: 0.76 m Clearance height: 2.20 m Platform load capacity: 360 kg Outriggers: none Drive: Electric Hodpfx Apjxfi D He Henn Special equipment Platform extension: 0.90 m with 360 kg Indoor and outdoor use (outdoor for one person, max. 160 kg) Low-marking tires Folding guardrails, height 1.81 m Driver's license class 3/B Dates/Status TÜV (technical inspection): not applicable UVV (accident prevention regulations): valid until: 12/2026 Mileage: not applicable Operating hours: 516 hours as of 05/2026 Stated price plus statutory VAT. Are you interested? We are always happy to assist you! You can reach us from Monday to Friday between 7:00 a.m. and 4:00 p.m. Subject to changes and errors!