Used Optimization Of The Cross-Cutting Line for sale (33,642)

Condition: good (used), For sale: Professional automatic cutting line for EPS (Expanded Polystyrene) blocks. Features & Specification: -Block storage / feeding magazine -Block tilter / inverter -Scrap / waste grinding system (bottom and side) -Horizontal cutting section -Contour / profile cutting section -Cross-cutter section Control System & Condition: The main electrical and control cabinet has been thoroughly modernized, with most components being -practically new. Controlled by a Siemens Simatic S7-1200 PLC. Maximum Block Dimensions: -Length: 410 cm Iijdpfozyyfkjx Amgoh -Width: 105 cm -Height: 130 cm Line Dimensions: -Cutting line length: 20 m -Block storage length: 6 m -Total straight-line length: 26 m

Condition: new, Year of construction: 2026, PLC-controlled, compact slitting and cross-cutting line for thin sheet metal, designed for industrial cutting, and boasting very high quality. PLC control with touchscreen – the quantity and section length are programmed. Maximum sheet width: 1,250 mm Cutting performance for sheet thicknesses ranging from 0.5 mm to 1.2 mm, using SJ235JR steel sheet with a tensile strength of 360 N/mm², with three sets of slitting knife pairs. The slitting unit is an autonomous module. For quick adjustment of the rotary knife pairs, the slitting unit can be easily pulled out or pushed in. Alignment unit with eight hardened and ground alignment rollers. Adjustment of the lower alignment rollers is motorized. Rubber-coated feed rollers – this allows for the processing of coated sheets as well. Slitting shear with 3 to 5 knife pairs. Smallest strip width: 200 mm Iiedpfjz Ei D Rjx Amgeh Maximum cutting speed: 20 m/min Very fast, mechanically guided cross-cutting shear for absolutely clean, burr-free cuts. Voltage: 3 x 400 volts – fuse rating: 25 amps – total drive power: 5 kW Dimensions, excluding the outfeed table, approximately 3 m x 1.9 m x H 1.8 m Weight, approximately 2,800 kg

Condition: new, Year of construction: 2026, warranty duration: 12 months, Customizable Sawing Machine: The Ideal Solution for Small and Medium Sections Total Optimization, High Precision, and Maximum Speed in One Tool TRV 1200 is the perfect saw for tackling the daily challenges of processing single boards, whether raw or painted. With its advanced technology, this ultra-fast and efficient cutting system allows you to optimize each operation without stress for the operators. Whether for small or medium sections, the TRV 1200 is designed to meet all your needs, with a continuous work cycle that ensures flawless performance. Intelligent Operation and Full Automation With the innovative touch screen, you can easily upload cutting lists directly from the device or remotely, from your office. Once you select the desired optimization, the system autonomously handles all subsequent stages, including: Material introduction (*see Cursal accessories) Automatic advancement and positioning Immediate data transmission to the CNC and optimization Piece evacuation Quality, width, and length selection (*see Cursal accessories) Maximum Speed and Precision Without Compromise With TRV 1200, speed is exceptional: 195 m/min, self-limited by the Brushless servo motor. The synergy of a high-performance optimizer, an indestructible machine structure, and precise table control ensures flawless results. The CNC-driven motorized belts and pneumatic pressure wheels guarantee perfect material positioning. Total Versatility for Every Type of Processing The TRV 1200 perfectly adapts to various applications, from recovery work to defect cleaning, or even more complex tasks that require advanced software processing. It is the ideal partner for optimizing every phase of the process, ensuring maximum results with minimal waste. Advanced and Easy-to-Use Programming Software Over 100 preset cutting plans: customizable widths, quality, and cutting specifications Different optimization options: for commercial value, for scrap, for quantity, for length, and mixed optimization Optimization simulation to ensure the best material management Continuous monitoring of worked quantities Internal optimization within the machine body to simplify the process and save valuable space Iiodpsv Ip Uzefx Amgeh Advanced Numerical Control for Efficient Management The heart of the TRV 1200 is the powerful CNC, an industrial computer that ensures continuous production without stoppages. With the HD touch screen, you can easily import data via USB and access simple yet powerful software, quick to learn and easy to use. Moreover, you can rely on online remote assistance for real-time troubleshooting. Discover how TRV 1200 can transform your production: speed, precision, and optimization at your fingertips.

Condition: used, machine/vehicle number: 008781, Position 1: Automated Warehouse IMA-CUTTING,EDGING,DRILLING LINE Position 2: Beam panel saws with automatic warehouse IMA-CUTTING,EDGING,DRILLING LINE Ijdpfsz Nx Hkox Amgeih Position 3: CNC machine centres with automatic warehouse IMA-CUTTING,EDGING,DRILLING LINE Position 4: edge bander batch 1 IMA-CUTTING,EDGING,DRILLING LINE Position 5: CNC for Flexible Drilling IMA-CUTTING,EDGING,DRILLING LINE Position 6: Robot IMA-CUTTING,EDGING,DRILLING LINE

Condition: excellent (used), Year of construction: 2012, cutting width (max.): 1,370 mm, CUTTING LINE POLAR N 137 PLUS – 2012 This Cutting Line is composed by the following equipment : • GUILLOTINE POLAR N 137 PLUS with Programs, air table, lateral tables, photocells, etc.. Serial number 8241112 Isdszcp Nfjpfx Amgeih • LIFT POLAR LW-1000-4 Serial number 827B505 • JOGGER POLAR RA-4 Serial number 7282009 Machine in excellent condition, available immediately

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Nr/ 531, We offer this Concept Stal - CS-GPW cut-to-length and slitting line, as new, year of manufacture 2020. Iisdpfx Aeyi U Ugemgsh Manufacturer: Concept Stal Model: - CS-GPW Year: 2020 Condition: as new Category ID: 1043 Type ID: 1660 Type: Cut-to-length and slitting line If you have any questions or require further information, please send us a message or call us. The line consists of: 1. Sheet steel feeder stand, max coil weight 6000 kg 2. Working module 3. Guillotine 1250 mm 4. Sheet feeding and slitting module (roller blades) 5. Production table (automatic) 6. Product collection trolley 7. Protective film application module 8. Hydraulic-electric sheet coiling module 9. Compressor

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, cutting width (max.): 1,370 mm, BM5150 P137 CUTTING LINE - refurbished => Package Price €26.000 1) Polar 137EMC-MON AT Guillotine 1995 -> single item price 18.000 € 2) Transomat TR1ER145-3 Downstacker/Palletiser -> single item price 10,000 € 3) Jogger Polar RA-B-5 with Air Removal -> single item price 3.000 € 4) Paper Lift -> single item price 1.500 € Contact us for further info and for personal price negotiations Iedpfjv Ic H Dsx Amgeih

Condition: new, Year of construction: 2026, New Optimizing saw SALVACUT 5000 by SALVAMAC Innovative high speed optimizing saw with optimization and elimination of wood defects, with double traction with upper rollers and lower feed belt with independent management. Ijdpfx Aon E Sl Rjmgoih From an idea of Salvador Christian.

Condition: used, Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. Iiodpfx Amozryuvsgjh In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: - Belt length: approx. 1,700 mm + 2,700 mm - Cutting width: max. 2,500 mm - Cutting height: max. approx. 80 mm

Condition: ready for operation (used), Year of construction: 2012, BANDSAW TEBA 310 -CE marking -Year of manufacture 2012 -Maximum cutting capacity 310 mm -Conventional / Semi-automatic -Miter cutting device -Coolant system -Cutting speed / Infinitely adjustable -Total power 3 kW -Saw blade dimensions 3990x27x0.9 mm -Approx. 20 spare saw blades Iijdpfx Aez Di Slsmgoh Dimensions: L x W x H 1.7 x 1.2 x 1.9 meters / Weight approx. 1100 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: Iiodox Eb Abopfx Amgeh 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement If you have any questions or comments, please let us know. Best regards, Leo Holland

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, working width: 1,250 mm, warranty duration: 12 months, number of feed rollers: 1, Demonstration Machine Slit Cut 1250 mm Manufacturer: CIDAN Forstner Year of manufacture: 2025 Motorized feed Longitudinal slitting with 5 pairs of knives with automatic infeed Crosscutting with rotary shear SPS1 control for automatic feed, longitudinal and crosscutting The Forstner SLIT longitudinal and crosscutting line is optimally suited for all sheet metal shops, drawing from years of experience. The system consists of a proven combination of traditional Forstner machines and can be combined with any manual or motorized decoiling unit. Key advantages: - The new design makes your SLIT line even better. - Now even more space-saving with the same strength. - LED slit knife illumination. - Table can be operated from both sides. - Simplest knife adjustment. Standard equipment: - Roller feeder hopper - Feeder table Ijdpfx Amswy Hwpsgoih - 5 pairs of longitudinal knives - Crosscut rotary shear - SPS1 touch control - Speed: 25 m/min Cutting capacity in steel for longitudinal slitting: - With 3 pairs of knives: 1.5 mm - With 4 pairs of knives: 1.25 mm - With 5 pairs of knives: 1.0 mm

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 004/2017, The line (multi-purpose automatic machine) is designed for the automatic straightening and cutting of uncoiled flat and metal strip and coil into sheets of various dimensions, with a simultaneous stacking system. The machine was manufactured in Poland in 2017. Main technical and operational parameters of the line: 1. Overall external dimensions of the entire line: total length – 1230 cm, maximum height – 180/260 cm, maximum width – 320 cm, 2. Length/width/height: receiving table – 400 cm, 130 cm, 87 cm; feeding table – 400 cm, 150 cm, 87 cm. 3. Power supply: electrical 3 x 400V/50Hz 4. Flat sheet parameters – thickness 0.5 mm – 2.0 mm / width – max 1500 mm, perforated sheet parameters – thickness up to 3 mm, width – max 1500 mm. 5. Uncoiling, straightening, and cutting speed – automatically controlled. 6. Max. Load – 5000 kg (5T) [spindle carriage]. Machine construction: 1. Rail carriage, 2. Coil unwinder – for strip and coil, 3. Straightener with adjustable straightening gap, 4. Guillotine shears – for transverse cutting of the strip into sheets, 5. Stacker (trap) for preliminary collection of sheet metal, 6. Wheel-and-spindle carriage for packaging sheet metal, 7. Control cabinet – integrated electrical and electronic systems for power supply, programming, and control. 8. Adjustable control panel with a visual touch screen. 9. Safety devices – guards, emergency stop switches, wire circuit with limit switch, distinctive colors. The construction of the machines that make up the line is based on a monolithic, compact frame and table structure made of steel profiles, angles, closed profiles, flat bars, bracing, and sheet metal cladding. The components are joined by longitudinal, butt, and lap welding, as well as by detachable bolted connections. Ijdpfx Amsz Eafxsgsih The machine has been used very little (a few dozen operating hours) due to a change in production plans. It is in perfect condition. The stated price is the net price.

Condition: good (used), Code: 0252 Brand: MA BREVETTI Model: JUNIOR 275 Pneumatic double mitre saw for 45° + 45° cuts at both ends, in frames and mouldings of any shape and kind Technical data: Blade diameter mm 275 F30 Isdox Au A Nopfx Amgeih Max cutting capacity: Width 70 mm - Height 90 mm Production rate approx. 700/800 cuts Motors n° 2 - 2 Hp each - rpm 2800 Power supply V.380/50 Operating pressure 6 bar Suction port diameter 100 mm Overall dimensions mm 850 x 700 x 1400 mm Weight kg 265

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, functionality: fully functional, Equipment: cabin, documentation/manual, Log sawing line: 1) WRAVOR band saw, model WRC-1250 2) Circular saw for edging and trimming with 3 movable blades and one fixed blade with PLC, model WRAVOR 20/120 3X 3) Wravor conveyors for removing lumber from the band saw, transferring to the edging machine, feeding into the edging machine, and a conveyor with left-right discharge at the outlet of the edging machine, plus a log feeding ramp for the band saw. The equipment can also be sold separately (either just the band saw or the edging machine). For sale: complete WRAVOR log sawing line, model WRC-1250 Wravor Sawmill Machinery, manufactured in 2019: 1) Wravor band saw WRC 1250 2) Circular saw for edging and trimming with 3 adjustable blades and one fixed blade, model WRAVOR 20/120 3X 3) Conveyors (log loading ramp, lumber discharge conveyor from the band saw, transfer to the edging machine, infeed conveyors for the edging machine, conveyor with left-right discharge at the outlet of the edging machine) Iisdjzwf Ncepfx Amgoh Price for the entire line: 145,000 euros + VAT. The equipment can also be sold separately; for more details, please call:

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: MJY 142S-35, MJF 143-1535, MJY-MJF production line from the Chinese manufacturer China SHENGONG. The equipment was commissioned in 11/2022 and is designed for processing round logs with a maximum diameter of 340 mm and length of 5 m. The technology comprises: - Log infeed deck for 5 m logs with dosing and centering - Infeed conveyor to the machine - Double-shaft canting saw MJY 142S-35 - Outfeed pressure rollers - Distribution outfeed conveyor for cant and side boards Iedpfjw Rg Emjx Amgoih - Side boards conveyor - Cant conveyor with lateral ejection and flipping - Cant conveyor to multi-rip saw - Centering unit before multi-rip saw - Double-shaft multi-rip saw MJF 143-1535 - Lumber conveyor behind the saw - Side chains and lumber conveyor - Edging saw MJ 141-0440 with 5 lasers for saw blade positioning - Roller conveyor before and after the edger - Belt conveyor under the Multipris for offcut removal - Connecting belt conveyor - Belt conveyor under the multi-rip saw for offcut removal to chipping - Belt conveyor for removal from the hall - Chutes and conveyor connections - Accessories: hydraulics, electrics, and control system The price of the technology is without dismantling and at FCA Nepomuk Incoterms.

Condition: used, Year of construction: 2002, functionality: fully functional, Homag Profi Line CHF 51/32/32 Panel Saw with Cut-Rite software optimization - Year of manufacture: 2002 Iedpfx Asx Ey Nvsmgeih - Cutting width: 3200 x 3200 - 3 tables with air curtain - Saw projection: 102 mm - Cutting height: 85 mm - Main blade 400 mm - Main motor 11.2 kW (15 HP) - Incisor blade with independent motor

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Iijdpfx Amjy Alcisgjh Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Year of construction: 1993, condition: used, functionality: fully functional, We offer this used ALMORE Mini calo cutting line for thermal insulation, built in 1993, with a double unwinding unit from Jouanel, in very good working condition. These machines are specialized in sheet metal processing and are particularly suitable for thermal insulation, industrial thermal insulation, and ventilation workshops. Functions include: length cutting, deburring, punching, and profiling. Iiodpfsz Dtmajx Amgoh Machine weight: 2 tons. If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 28464, overall weight: 2,300 kg, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, CAT 500 cutting center – an automatic machine designed for cutting PVC profiles using a circular saw. Numerical control with dedicated software allows for programming processing parameters, limiting the operator's tasks to loading profiles and collecting finished parts. Saw parameters: - Arbor: Ø 30 mm - Diameter: Ø 500 mm - Rotational speed: 3000 rpm - Max. saw blade thickness: 4.2 mm Technical data: - Voltage: 380–400 V AC3PE - Current: 8 A - Frequency: 50 Hz - Power: 3.8 kW - Air pressure: 7 bar - Weight: 2300 kg Standard equipment: - Tungsten carbide saw blade Ø 500 mm (arbor Ø30) - Welded frame with adjustable feet and the possibility of mounting to the floor - Industrial computer integrated with the machine - Infeed belts with inverter control and programmable acceleration/deceleration ramps - Label printer Dimensions: - Infeed: 7900 mm - Machine: 1000 mm - Outfeed: 2600 mm - Max. width: 2300 mm - Max. height: 1700 mm Ijdpfxszvmh Re Amgjih - Overall length: 11500 mm

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 209070, CASATI BIT 900/2000 veneer cross-cutting machine. Fully functional. Iiodjuna E Hepfx Amgsh

Condition: used, Application: cutting Breton cakes Articulated element conveyor Horizontal product transport Conveyor with straight and curved sections Cutting station under a transparent enclosure Vertical work unit above the conveyor Metal structure on adjustable legs Legs with floor support pads Electrical control cabinet Control buttons on the front panel Emergency stop on the electrical cabinet Visible pneumatic hoses Iijdpfx Amsz S Nfiogeh SCHMERSAL safety component Apparent sensor reference: BNS 33-12Z Sensor protection rating: IP69K Standard indicated on the sensor: IEC 60947-5-3 Maximum sensor voltage: 100 V AC/DC

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake Isdpefhbuysfx Amgoih - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: used, Year of construction: 2018, functionality: fully functional, number of straightening rollers: 6, conveyor belt width: 1,300 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, cutting length (max.): 6,400 mm, straightening roller diameter: 70 mm, space requirement width: 3,500 mm, space requirement length: 18,275 mm, space requirement height: 4,000 mm, Single-person operation, rapid access to a wide variety of sheets, automatic sheet changeover, standard sheets remain loaded in the system; the upper sheets are less common types; secure solution with a movable access aid for loading the upper decoilers; programmable slitting line with 8 pairs of knives in station version; slitting knives are alternately arranged for distortion-free cutting; rotary knives of the AL p with 100 mm diameter to achieve minimal incision; 7.2 m long conveyor belt for discharging the strips. Iisdpfexwc E Isx Amgeh The system layout PDF is shown as a mirror image!

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 117, saw blade diameter: 800 mm, cutting height (max.): 300 mm, input voltage: 400 V, saw drive: 15,000 W, operating pressure: 6 bar, Solid and powerful machine for carpentry and timber construction. Longitudinal cuts up to 300 mm cutting height. 800 mm saw blade for a large cross-cutting range, mounted on a rotary table. This allows nearly any mitre angle to be set. Longitudinal cuts, trimming, notching, wedge planks – everything is possible. The double-sided feed system effortlessly processes even large beams through the machine. In cross-cutting mode, the feed pistons serve as hold-downs. Two-hand operation ensures safe usage. The integrated support in the machine provides 3 m roller conveyors on both the left and right sides. The support options can be expanded by using tall, stable 3-roller supports (optional). The machine is tested and in good condition. Both digital displays including sensors are new (repairs alone cost €5,000). Many hoses have been replaced. The pneumatic unit has been serviced. Everything else was in excellent condition due to the machine's robust design! Ijdpfx Aov Nktbjmgjih