Used Optimum F110 E for sale (69,618)

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, roller length: 1,100 mm, working width: 1,030 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 2 mm, overall weight: 440 kg, total length: 1,750 mm, total width: 650 mm, total height: 1,100 mm, power: 1.5 kW (2.04 HP), input voltage: 400 V, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, 3 rolls plate bending machine DURMA MRB 1030/3mm rolling machine for sale in excellent condition. manufacturer: Durma MRB-E 1003 Iaodpfx Aneyzrcgswju year of manufacture 2010 number of rollers 3 upper roller diameter Ø: 90 mm roll length: 1030 mm high tensile steel rollers with SAE 1050 quality certificate - Wire grooves at the ends of the rollers (4/6/9) mm CE certification Cone rolling Upper roller can be opened Manually adjusted rear and lower roller Operation: Foot pedal Motor power: 1.5kw braked gear motor Electrical connection 400 V Cast iron frame construction Machine weight: 440 kg length: 1750 mm width: 650 mm height: 1100 mm

Condition: new, Precision center lathe and feed spindle lathe Make: OPTiturn Iajdpfx Anoilup Nowsu Model: TM 4010 D Item no.: 3403045 Condition: New machine Center height: 200 mm Center width: 1.000 mm Spindle speed: 70 - 2,000 rpm (8 steps) Equipped as standard with - 3-axis digital readout DPA 31 PLUS - Machine base - 200 mm three-jaw chuck - LED machine light - Reducing sleeve MK 4/MK 6 - Fixed center point MK 4 - Steady rest, fixed - Steady rest, moving - Quick-change steel holder Basic body E - Torsion steel holder ED - Chuck protection cover, electrically fused - Oil filling - Operating tool - Operating instructions

Condition: new, Precision control and lathe Make: OPTiturn Model: TH 4210 Iajdodbgxcopfx Anwou Item No.: 3462050 Condition: new machine Tip height: 210 mm Top width: 1,000 mm equipped as standard with: -Machine base -Quad steel holder -Light machine -Reducing bushing MK 6 / MK 4 -2 fixed centres MK 4 -Fixed bezel, 15-105 mm -Bezel running with 10-65 mm -Chuck guard, electrically protected -Coolant system -Change gears set -Oil -Control tool -Manual

Condition: new, Year of construction: 2026, Precision center lathe and feed spindle lathe Make: OPTIMUM Model: OPTiturn TZ 4 Item no.: 3432240 Condition: New machine Center height: 200 mm Center width: 800 mm Speed: 45 - 1,800 rpm (16 steps) equipped as standard with Ijdpfx Asgqw U Renwoau - 3-axis digital readout DPA 32 - MK 3 fixed center point - quick-change toolholder size B - BD turning tool holder - Reducing sleeve MK 6 / MK 3 - Fixed steady rest ø 10 - 130 mm - Moving steady rest ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine lamp - Operating tool

Condition: used, Universal tool milling machine Brand: OPTIMUM Model: MT 100 Iaodpfx Anew Rlvqjwsu Year of manufacture: 2018 – workshop tested Machine no.: J33021808035 Geometric acceptance with test report Accessories: - 3-axis digital display DPA 2000 - Vertical milling head SK 40 with drawbar thread M 16 - Fixed table 1,120 x 260 mm (T-slot: 14 mm) - Machine lamp - Coolant system - Manual central lubrication - Operating manual Used as seen, without warranty The machine technically corresponds to the state of the art at the time of manufacture.

Condition: new, Precision center lathe and feed spindle lathe Make: OPTiturn Model: TM 3310 D Item no.: 3403025 Condition: New machine Center height: 165 mm Center width: 1.000 mm Spindle speed: 65 - 2,000 rpm (9 steps) Equipped as standard with - 3-axis digital readout DPA 31 PLUS - 3-jaw chuck 160 mm - Electrically braked main motor - Machine base with chip tray - quadruple steel holder - LED machine light - Reducing sleeve MK 5/MK 3 - MK 3 fixed centers - Chuck protection hood, electrically fused - Set of change wheels - Oil filling - Operating tool Isdpfxeh I N Sbe Anwoau - Operating instructions

Condition: new, Band saw machine Make: OPTIMUM Model: S 275 NV Art.Nr.: 3300265 Condition: new machine Section (round): 225 mm Cutting speed: 20-90 m / min equipped as standard with: -Horizontal vise -Back fence - automatic shut-off after the end of the cut Iodsdynpcjpfx Anweau -Späneräumbürste -Coolant system -Manual

Condition: new, Universal milling machine Make: OPTimill Model: MT 60 Item no.: 3336090 Condition: New machine Travels: - X-axis 750 mm - Y-axis 230 mm - Z-axis 360 mm equipped as standard with - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - B 18 drill chuck holder Iaedpfx Ajg Anfnjnweu - Gear rim drill chuck 3-16 mm / B 18 - Reducing sleeve MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - T-nuts - Coolant device - LED lamp - Operating tool - Operating instructions

Condition: new, Precision Center Lathe and Center Lathe Make: OPTIMUM Model: OPTiturn TZ 4V Item No.: 3432245 Condition: New machine center height: 200 mm center width: 800 mm speed: 50 - 3.000 rpm infinitely variable via 2 gear steps with SIEMENS Inverter-Vario-drive Iajdpfxeg Hkmrs Anwju equipped as standard with: - 3-axis digital display DPA 32 - digital speed display in headstock - fixed center point MK 3 - quick change tool holder size B - turning toolholder BD - reducing sleeve MK 6 / MK 3 - steady rest fixed ø 10 - 130 mm - steady rest travelling ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine light - Operating tool

Condition: new, Universal milling machine Make: OPTimill Model: MT 50 Item no.: 3336005 Condition: New machine Travels: - X-axis 580 mm - Y-axis 200 mm - Z-axis 340 mm serially equipped with: - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - Long milling arbor 16 mm - Mandrel long 22 mm Iedsbnfxuspfx Anwoau - Drill chuck holder B 18 - Gear rim drill chuck 3-16 mm/B 18 - Reducing chuck MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - Machine light - Coolant device - Operating tool - Operating instructions

Condition: new, Year of construction: 2021, Drilling/milling machine Make: OPTimill Model: MF 4V Item no.: 3336050 Condition: New machine travels: - X-axis 900 mm - Y-axis 400 mm - Z-axis 406 mm Spindle speed: 9 - 6,750 rpm (infinitely variable) equipped as standard with: Iajdogmd Dbspfx Anwou - 3-A digital display DPA 21 - Reversing switch right/left rotation - Drilling depth stop - cross table 1.244 x 230 mm (T-slot: 16 mm) with motorized table height adjustment (Z-axis) - chuck guard - Coolant device - Operating instructions

Condition: new, Stylus grinding machine Make: OPTigrind Model: GH 20 T Art.Nr.: 3100125 Condition: new machine Speed: 5.000 rpm Clamping range: 1-12 mm equipped as standard with: -Collets 385E, size 4 / 6 / 8 / 10 / 12 mm -Corundum pot wheel -Diamond Cup wheel -Device for the Regrinding of chisel Iaodpfxjc I Tzvs Anwsu -Device for the sharpening of cutters -Apparatus for the grinding of twist drills -Manual

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 460 mm turning diameter over support: 388 mm turning length: 1016 mm centre distance: 1016 mm center height measured in bed: 230 mm turning dia. in gap: 640 mm spindle bore of work spindle: 52 mm range of revolution per miute: 30 - 2000 / 12 step U/min Iedpfxou Ixzbe Anweau feeds:: längs: 0,032 - 0,898 mm/U feeds:: plan: 0,016 - 0,449 mm/U tailstock quill taper MT: 4 tailstock quill adjustment:: 120 mm total power requirement: 3,75 kW weight of the machine ca.: 1,6 t dimension machine xH: 2,1 x 1,1 x 1,5 m Switchable gearbox Quantum 3-way length measuring system Top slide adjustment +/-90° Multifix quick-change steel holder 3-jaw chuck Ø 200mm rotating center in tailstock Threads: Inch thread; Metric thread; Trapezoidal thread; Module thread Accessories: Change gears, machine feet, 1x fixed quill tip *

Condition: used, functionality: fully functional, fuel type: diesel, Year of construction: 2004, From our used vehicle inventory, we offer: 2 units Aircraft Rescue & Fire Fighting Vehicle (ARFF) E-ONE TITAN HPR 8x8 with 12,000 l water capacity CHASSIS • Permanent all-wheel drive • 4-stroke Detroit Diesel® MTU Series 12V2000 engine with 749 kW (1,005 HP) • Allison M-6610A 6-speed automatic transmission • Year of manufacture: 2004 • Operating hours: approx. 3,750 h each • Mileage: 43,200 km and 46,500 km • Acceleration 0-100 km/h in 35 s • Maximum speed: 125 km/h CABIN • 2 seats with integrated SCBA mounts • Comprehensive firefighting system controls • Colour: RAL 3000 (fire red) • Air conditioning and auxiliary heater DIMENSIONS & WEIGHT • Unladen weight approx. 9,260 kg • Permissible gross weight approx. 42,000 kg • Dimensions approx. 12,000 x 3,000 x 3,700 mm (LxWxH) FIRE SUPPRESSION SYSTEM • Water tank approx. 12,000 L • Foam tank approx. 750 L • Heated tanks for foam and water • Pump capacity approx. 8,000 l/min • Roof monitor 4,500 l/min, throw range 75 m, remote controlled • Front monitor 2,000 l/min, throw range 60 m, remote controlled • 3 rigid quick-attack lines LIGHTING/SAFETY • Built-in 10 kVA generator • Pneumatic light mast with 2 floodlights Iodpsy Ny R Uofx Anwsau Each vehicle undergoes a complete inspection and service, covering all components including engine, transmission, differential, pumps; all filters and lubricants are replaced. The vehicles will receive current TÜV and SP inspection certificates. We are happy to provide you with a tailored offer and present the vehicles in detail. Note: All information provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. Illustrations may show optional equipment. This is an informational listing and not a binding offer. Subject to prior sale!

Condition: good (used), Year of construction: 1990, machine/vehicle number: 3010164, Offer 25462 Technical Data: - Drilling capacity in ST 37 up to 32 mm - Drill spindle mounting with drawbolt thread M 12 / MT 3 - Drill spindle speeds: 120 to 1600 rpm - Drilling unit height adjustable via hand crank - Maximum distance table / drill-milling spindle: 650 mm Iodpfey Nabaex Anwoau - Drill spindle stroke with fine feed via handwheel: 130 mm - Drill spindle outreach: 205 mm - Drill-milling unit rotatable 360° - Coordinate table with 3 T-slots: 730 x 210 mm - Table travel: X-axis 250 mm / Y-axis 200 mm - Drive: 400 V / 1.5 kW - Space requirement: approx. W 1150 x H 1100 x D 1100 mm - Weight: approx. 270 kg

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 170 mm 3) Left vertical, 170 mm (spindles 2 and 3), 11 kW 4) Top horizontal, 230 mm, 11 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 11 kW - All spindles adjustable up/down, left/right - Spindles 4 and 5 electrically adjustable up/down - Spindle speed: 8,000 rpm - Spindle diameter: 40 mm - All spindles equipped with electric braking - 6 feed-in, driven, toothed upper rollers, including 1 double - Double exit, driven, rubber-coated upper roller - Double exit, driven, rubber-coated lower roller - Side pressure unit - Feed via Kardana shafts - Pneumatically tensioned rollers - Infinitely variable feed speed: 6–24 m/min - Feed motor: 4 kW - Electric planing thickness adjustment - Body lifting motor: 0.55 kW - Central table lubrication - Extraction nozzle diameter: 6 × 140 mm - Dimensions (L×W×H): 4,900 × 2,400 × 2,000 mm - Weight: approx. 4,000 kg FEATURES – German-made, WEINIG brand – With 6 heads Iodpfx Aoy N Ahijnwjau – Not repainted – Used planer, very good condition Original pictures Net price: PLN 142,900 Net price: EUR 34,000 (based on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 14845, Year of construction: 2008, load capacity: 5,000 kg, lifting height: 6,500 mm, load center: 600 mm, fuel type: diesel, power: 60 kW (81.58 HP), No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting capacity: 5,000 kg Lift height: 6,500 mm Load center: 600 mm MACHINE DETAILS Fuel type: Diesel ISO class: ISO class 3 = 2,500 – 4,999 kg Power: 60 kW Iajdpfx Anoy N Rh Dsweu EQUIPMENT Heater Full cabin

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 0518100425, center height: 260 mm, center width: 2,000 mm, spindle speed (max.): 2,000 rpm, bed width: 220 mm, control type: manual, TECHNICAL DETAILS Centre height: 260 mm Swing over bed: 460 mm Distance between centres: 2,000 mm Bed width: 220 mm Spindle bore: 82 mm Spindle speed range: 25 - 2,000 rpm MACHINE DETAILS Control: Conventional Dimensions & weight Dimensions (L x W x H): 3,350 x 1,000 x 1,530 mm Net weight: 3,000 kg Transport packages: 1 unit EQUIPMENT Quick-change tool holder Iasdpfx Ansy Hicujwou Three-jaw chuck Digital readout: SINO SDS6-3V

Condition: excellent (used), Year of construction: 2013, Band saw, Semi-automatic saw, Metal saw, Metal band saw, Frame metal saw Toptech / Optimum GB 4240, Used machine Manufacturer: Toptech / Optimum Type: GB 4240 Year/month of manufacture: 2013/06 Inclusion dimensions: 2200 x 1100 x 2000 mm Electrical data: 400 V / 50 Hz / 4 kW Tape size: 34 x 11 x 4320 mm Belt speed: 19-86 m/min - Hydraulic vise - Adjustable feed Material size: 400 x 400 mm Ijdpfxjm Akwzs Anweau

Condition: used, color: other, first registration: 04/2010, Year of construction: 2010, Serial number: 25.50.744.012 We have a stock of >100 axles. Iajdpfx Ansy Eft Hewou Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 04/2010, Year of construction: 2010, Serial number: 25.50.744.013 We have a stock of >100 axles. Iaedpfx Aney Efrcsweu Please contact us if you can't find what you are looking for.

Condition: new, For sale: new Grundfos CRN5-11 vertical multistage pump. The pump has never been used and comes from warehouse surplus. The equipment is in excellent condition, stored in its original packaging. Manufacturer's documentation included in the set. Grundfos CRN series pumps are designed for use in industrial and water installations. They are characterized by high performance, reliability, and excellent build quality. Technical data Manufacturer: Grundfos Iaodoyubcnjpfx Anwou Model: CRN5-11 A-P-A-E-HQQE Motor power: 2.2 kW Frequency: 50 Hz Rotational speed: 2899 rpm Capacity: 5.8 m³/h Head: up to 56.5 m (max 76 m) Maximum pressure: 25 bar Maximum temperature: 120°C The pump is made of stainless steel, suitable for use in water installations, industrial systems, pressure systems, process installations, and water treatment systems. Condition: new, never used.

Condition: good (used), Year of construction: 2009, Internal Item No.: 26044 Universal Milling Machine Optimum UF 100 Year of manufacture: 2009 Iedpfx Anoy H D N Nowjau + 3-axis digital readout Spindle taper: SK40 Spindle speed: 45 - 1660 rpm Table: 1120 x 260 mm Travel: X 625 / Y 220 / Z 430 mm Dimensions (LxWxH): 200 x 200 x 170 cm Weight: approx. 1500 kg The machine is fully functional and can be inspected under power, by appointment, in a heated storage facility of over 500 m².

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 20221346, input voltage: 400 V, Quiet running Heavy cast iron version High cutting accuracy due to vibration-free running Ball-bearing saw blade guide EMV class C2 Twin-channel safety chain with quick stop in case of emergencyStop Chips brush Microswitch for automatic limit switch Push button - Manual saw band run - the hand lever switches the saw band run on and off Ijdpjyx S Dfjfx Anwoau Serially with high-quality bi-metal saw band Material stop with scaling Quick clamping vice adjustable via hand wheel. Clamping the workpiece with a handy quick-action clamping lever Stable machine base End stops adjustable to the degree Steplessly adjustable saw blade speed 15 - 90 m/min Double miter Turntable: Any angle between 45° and -60° can be sawed as the cutting gap swivels with the saw arm

Condition: like new (used), Year of construction: 2024, As-new polishing machine OPTIMUM OPTIpolish GZ40P with variable-speed conversion featuring Siemens inverter and cyclone extraction system. For polishing wheels with a diameter of up to 350mm, maximum wheel width 35mm, wheel bore 20mm. Suitable for continuous and intensive industrial use. Heavy-duty industrial polishing machine; its high dead weight absorbs the already minimal vibrations. Maintenance-free, long-life induction motor with smooth operation, cast iron housing. Additionally equipped with: Variable speed drive using Siemens Sinamics V20 inverter. Circumferential speed adjustable from 34 m/s down to 6 m/s. Sturdy base with cyclone extraction integrated in the base, thus requiring minimal space. Sound-insulated. Isdpfxoyglkyj Anwoau The base must be filled with concrete by the customer. Automatic start/stop feature: When the external device is powered on or off, the extraction system automatically switches on or off with a 2-3 sec delay. There is no need to operate the extraction system separately. According to hazardous substance regulations, residual dust is extracted after the machine shuts down. The machine is located at 71334 Waiblingen-Beinstein and can, of course, be inspected by appointment. Please contact us for further information.