Used Pbt Superswash Iii for sale (765)

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12790-T, total width: 1,400 mm, total length: 1,560 mm, total height: 1,100 mm, overall weight: 2,000 kg, input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, The system was decommissioned one year ago due to a switch to a central system. One year before decommissioning, all TCF elements were replaced. In 2018, the filter elements in the sludge treatment system were upgraded to a more modern and process-reliable extraction system. Cooling was implemented via an on-site control system, including a chilled water unit. The cooling pump (oil side) is still present and installed. Should you require assistance with the design of the cooling system, we would be happy to support you. We can also assist with a restart on-site, if required. Technical data: - Total filter capacity approx. 210 l/min - Filter fineness approx. 3 μm nominal - Tank volume approx. 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter cartridges - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system consisting of a sedimentation tank and a scraper conveyor Laodpfx Aszxn Nnobzsg - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 pcs. Variable speed machine supply pump for supplying the machines with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 200 l/min - Delivery pressure: approx. 10 bar - Drive: 7.5 kW, 400 V, 50 Hz with frequency inverter - Pressure sensor for constant coolant pressure, independent of the draw at the machine, included 2 pcs. Drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 30 l/min - Delivery pressure: approx. 10 bar - Drive: 400 V, 50 Hz 1 pcs. Cooling pump Brinckmann TA400/550 380 l/min 2m Drive 400 V, 50 Hz, 0.85 kW 2 pcs. Shut-off valve 5/4" NC for coolant supply lines closing against the media flow as a shut-off valve between the machine and the central supply line.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 13341-T, total width: 1,420 mm, total length: 1,576 mm, total height: 1,100 mm, overall weight: 2,000 kg, cooling capacity: 20 kW (27.19 HP), input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, Equipment: cooling unit, The system was taken out of service a year ago due to a switch to a centralized system. One year before decommissioning, all TCF elements were replaced. Lsdpfx Abszxhcnezeag We can provide support for recommissioning. Technical data: - Total filter capacity approximately 210 l/min - Filter fineness approximately 3 μm nominal - Tank capacity approximately 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter columns - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system via a settling tank and scraper conveyor - In-line cooling via the return flow from the filter columns to the clean oil area via the plate heat exchanger, including flow control in the chilled water circuit - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 2 pcs. machine supply pump for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approximately 100 l/min - Delivery pressure: approximately 10 bar - Drive: 400V, 50Hz 2 pcs. drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approximately 30 l/min - Delivery pressure: approximately 6 bar - Drive: 400V, 50Hz 1 pcs. screwed plate heat exchanger with cooling control approximately 20kW Designed for cooling water 70 l/min, 13°C supply temperature.

Condition: used, mileage: 101,989 km, power: 155 kW (210.74 HP), first registration: 11/2021, fuel type: diesel, maximum load weight: 2,125 kg, overall weight: 7,490 kg, axle configuration: 4x2, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Classic Space 2.3 with tunnel, wheelbase 4160 mm, driver’s air suspension seat, functional passenger seat, third central seat, electric windows, air conditioning, pollen filter, shelf above the windshield, storage compartment on the engine tunnel, sunroof, immobilizer with transponder, Economy driving program, MB PS3 automatic transmission, 10.4” combined instrument cluster, 120-liter plastic diesel fuel tank on the left side, 35-liter plastic AdBlue tank on the left side, ABS, ASR, ESP, EURO VI with OBD C, enhanced engine brake, lane assistant, ABA, driver’s airbag, cruise control. Plywood cargo box with dimensions 6010 x 2450 x 2400, BAR hydraulic tail lift with a capacity of 1000 kg, 1800 mm platform, and roll-stop. Ljdpezk Rxpsfx Abzjag

Condition: used, mileage: 150,773 km, power: 105 kW (142.76 HP), first registration: 07/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 01/2027, color: red, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 6,156 mm, total width: 2,099 mm, total height: 2,410 mm, loading space length: 2,700 mm, loading space width: 2,040 mm, loading space height: 400 mm, Equipment: ABS, central locking, electronic stability program (ESP), parking heater, soot filter, Mercedes-Benz Sprinter III, Flatbed, 314CDI Wheelbase: 3.65 m Payload: 1,100 kg Special equipment: Airbag, passenger side, Trailer socket, 13-pin, Audio system: MB audio system with radio, USB, and Bluetooth hands-free system, Hands-free system, Bluetooth, Lodjzwaffjpfx Abzsag DAB tuner (digital radio reception), Chassis: Stabilization level I, Remote control for auxiliary heater, Cup holder, front, Comfort chassis, Radiator grille frame in vehicle color, Ladder rack behind the cab, Spare wheel holder under the end of the frame, including jack, Rearview mirror, interior, Rear wall with window, Seatbelt system with warning system (passenger side), Seats in the cab: Double passenger seat, Seats in the cab: Comfort driver's seat, Seats in the cab: Driver's seat with lumbar support, Storage compartment on the left and right under the flatbed, Tinted rear windows / black tinted glass, Rear wall trim, Absorbent glass mat battery, 92 Ah, Reinforced front axle, Heat-protective glazing (windshield with band filter at the top), Auxiliary heater (hot water) Tow ball with electrical connection Additional equipment: Storage compartment above the windshield, Storage compartment below the dashboard, passenger side, Towing eye, rear, Adaptive brake light, Airbag, driver side, Traction control system (ASR), Washer fluid level indicator, Exterior mirrors, electrically adjustable and heated, both sides, Outside temperature display, Headliner in the cab, Automatic activation for headlights, Communication module (LTE) for digital services, Fuel tank: Main tank 71 liters, Steering wheel (steering column mechanically adjustable), Headlamp range adjustment, Side marker lights, Mercedes-Benz emergency call system, Engine 2.1 L - 105 kW CDI CAT, Wheelbase 3665 mm, Seatbelt system with warning system (driver side), Seat cover / upholstery: Fabric, Start/stop system, engine, Service interval display, ASSYST, Permissible total weight 3.50 t We would also be happy to assist you with financing/leasing through our partners. All information without guarantee. Errors and prior sale excepted.

Condition: used, mileage: 213,304 km, power: 54 kW (73.42 HP), first registration: 01/2013, fuel type: gasoline, maximum load weight: 535 kg, overall weight: 1,680 kg, emission class: euro5, number of seats: 2, Equipment: ABS, power assisted steering, VEHICLE AVAILABLE ONLY TO DEALERS Ledpfx Aboymm Rhezsag For information

Condition: good (used), Year of construction: 1998, Striebig Automat III TRK, manufactured in December 1998 Technical details: Power: 4.4 kW (5.98 hp) Input voltage: 400 V Input current: 12 A Cutting height (max.): 2,200 mm Cutting width (max.): 4,300 mm Saw blade diameter: 300 mm Speed (min.): 4,750 rpm Overall length: 5,400 mm Total weight: 1,000 kg Location: available from stock in 54634 Bitburg Laodoznncmepfx Abzjg - immediately available -

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: P15143, Manufacturing origin JP Laedogfqu Sjpfx Abzsg Voltage 400 V Netweight 2400 kg Dimensions 2450x1320x1700 mm mm with bar-feeder LNS Express 200 TECHNICAL DATA Main spindle Max machining diameter Ø 16 mm Max turning length, without re-chucking 200 mm Through-hole diameter Ø 20 mm Speed 10'000 min-1 Indexing 0,001° Drive 2,2 kW Sub-spindle Max machining diameter Ø 16 mm Speed 10'000 min-1 Indexing 0,001° Drive 0,75 kW No. of rotary tools at vertical tool holder 4 Speed of rotary tools 8'000 min-1 Drive power 0,75 kW No. of tools at turret 10 Speed of rotary tools 6’500 min-1 Drive power 0,75 kW Tools 5 Drill holder for back machining 3/2 rotary (option) Collet sleeve diameter Ø 19,05 mm Tool holders, rotary tools (shank section) 10 mm Collet type (spindle and sub-spindle) F20 (138E) Drill collets ER11 Guide bush(Neukomm) F605 (61.002) Rapid feed rates, all axes 20m/min errors and omissions excepted-data given without obligation

Condition: refurbished (used), load capacity: 6 kg, inspected and tested Lsdpfx Aszvffnsbzsag

Condition: refurbished (used), functionality: fully functional, inspected and tested Lodozvfarjpfx Abzsag

Condition: good (used), Continuous hot air oven, protein cooker. Has been cooking poultry portions and burgers etc. Nice condition and in production until April 2024. Ledpfx Aow Rn T Sobzeag

Year of construction: 2001, condition: good (used), machine/vehicle number: KBK3, DEMAG KBK crane headliner crane runway dimensions approx. 20 x 9 m Ljdpohvpzhefx Abzeag Track length can be combined variably !!! Any size is possible. Payload / lifting load 250 KG - 0.25to Technical data of the system: Crane runway made from Demag KBK2 rails, bridge made from KBK3 Mounting height variable, chain length approx. 4 m The system is delivered complete: -KBK rails, rail connectors - Undercarriages, end plates, cable towing, holders/hangers, etc including bridge with Demag 0.25 to chain hoist Shipping by forwarding agency possible, collection preferred Demag KBK1 KBK2 and KBK3 rails are stock items! Dispatch by forwarding agent, please ask for postal code. Please ask for other dimensions or shipping prices, we will make you a non-binding offer immediately!

Year of construction: 2011, condition: excellent (used), We are offering for sale our Viscom AOI S3088 - III in very good condition. Laodpfezv S Dwox Abzsg - Manufacturer: Viscom SE, Hanover - Type: S3088-III - Inventory No.: ZZ052495 - Year of manufacture: 03/2011 - Serial number: 101159 - Camera configuration: 8M (4x orthogonal, 4x angled) - Software version: 9.40 (4) - Licenses: OCR and DMC - Last calibration: May 2025 - Operating system: Windows 7 Professional (Service Pack 1) - Processor: Intel Core i7-3770 CPU / 3.40 GHz - RAM: 16 GB - UPS functional The system has been inspected by our technician and found to be in very good condition. We will gladly provide you with a demonstration video of the system, or we look forward to your visit.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: W1V9106231P325397, mileage: 155,956 km, power: 105 kW (142.76 HP), first registration: 04/2021, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: mechanical, number of seats: 2, Year of construction: 2021, number of previous owners: 1, Equipment: ABS, air conditioning, airbag, car registration, central locking, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, sliding door, soot filter, summer tires, traction control, Good day and thank you for your interest in our vehicles. For sale is a Sprinter that has been used as a service vehicle. Considering its age and mileage, the vehicle is in very good, well-maintained condition. Please do not hesitate to contact us if you have any questions. WE SPEAK ENGLISH Laodpfx Abow Dbymszjg

Condition: ready for operation (used), Year of construction: 2023, clamping force: 2,500 kN, screw diameter: 55 mm, overall weight: 8,400 kg, Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA 2500 III features a clamping force of 250 tons and a platen size of 850 x 850 mm. The machine includes an impressive injection pressure of 1850 bar and a screw diameter of 55 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA 2500 III machine we have for sale. Contact us for further details regarding this machine. • Clamping unit • Opening force: 165 kN • Platen size: 850 x 850 mm • Opening stroke: 540 mm • Tie bar distance: 580 x 580 mm • Max mould height: 580 mm • Min mould height: 220 mm • Ejector stroke: 150 mm • Ejector force: 62 kN • Min mould dimensions: 410 x 410 mm • Injection unit • Euromap classification: 1000 • L/D ratio: 20 • Shot volume: 570 cm³ • Effective injection volume: 519 g • Injection rate: 281 g/s • Plasticizing capacity: 47.7 g/s • Injection pressure: 1850 bar • Screw speed: 180 rpm • Screw stroke: 240 mm • Carriage force: 99 kN • Pump motor power: 37 kW • Heater power: 21.45 kW • Oil tank capacity: 340 L • Dimensions • Machine size: 6.19 x 1.60 x 2.42 m • Control • Controller: KEBA 2985 – CP053 • Features: • 15” colour touchscreen • Euromap 67 robot interface • USB memory • 200 mould memory • Cycle history • Alarm tower • RFID login/password • Multilanguage interface • Process graphs • Maintenance pages • Metric / imperial selectable • Included options / extras (machine-integrated) • Bimetallic screw + barrel • Masterbatch dosing interface • Hydraulic radial extraction • Festo air blow system • 12-zone PSG central lubrication • 4-way flowmeter • Robot interface • Included screw H 3 zones • CE certified work cell Additional equipment Ljdpfoy N Sqmox Abzoag • Robot included: HILECTRO V-1300ID Cartesian Robot (2023) • Type: 3-axis servo Cartesian robot • Suitable for: 380T to 530T presses • Travels: X 2000 mm / Y 880 mm / Z 1300 mm • Max extractable weight: 12 kg • Power: 400 VAC / 50-60 Hz • Precision: 0.1 mm • Robot weight: 530 kg • Included: Touchscreen controller, USB programs, pneumatic gripper, vacuum cups, conveyor ready • Peripherals included: FORMAX E3 Monofase Hopper Loader (2 units) • Hopper capacity: 3.0 L • Power: 1150 W • Inlet diameter: 40 mm • Capacity: 70 kg/h • Voltage: 230 V • Weight: 13 kg each

Year of construction: 2015, condition: ready for operation (used), travel distance X-axis: 215 mm, travel distance Z-axis: 762 mm, overall weight: 3,300 kg, number of axes: 2, Cylindrical grinding machine manufactured in 2015. This OKAMOTO OGM 250 UNC III features a maximum machining diameter of 200 mm and a distance between centres of 500 mm. It includes an X-axis travel of 215 mm and a Z-axis travel of 762 mm, providing efficient grinding capabilities. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO OGM 250 UNC III machine we have for sale. Contact us for further details. • Swing over table: 220 mm • Distance between centres: 500 mm • Maximum machining diameter: 200 mm • Maximum workpiece weight between centres: 50 kg • Maximum workpiece weight in chuck: 20 kg Lasdpfxjzuy T Dj Abzsg • Grinding wheel dimensions: Ø305 × 25 × Ø127 mm • Grinding wheel speed: 1,880–2,210 rpm • Maximum peripheral speed: 30 m/s • X-axis rapid feed: 4,000 mm/min • Grinding head swivel angle: ±30° • Z-axis rapid feed: 8,000 mm/min • Minimum input increment: 0.0001 mm • Workhead spindle: Combined dead and live spindle • Workhead centre taper: MT No. 3 • Workhead through-hole diameter: Ø18 mm • Workhead speed: 10–500 rpm • Workhead swivel angle: +30° to -90° • Tailstock spindle travel: 20 mm • Tailstock centre taper: MT No. 3 • Coolant tank capacity: 120 litres • Lubricant tank capacity: 3 litres • Machine dimensions: 2,851 × 1,735 × 1,710 mm • Power supply: 200 V, 50 Hz, 3-phase, 3-wire • Total connected load: 15 kVA / 10.5 kW • Maximum full-load current: 50 A • Largest motor: 5.5 kW / 22 A • Control circuit: AC 100 V / DC 24 V • Condition: Operational

Condition: used, mileage: 40 km, power: 140 kW (190.35 HP), first registration: 06/2026, fuel type: diesel, overall weight: 4,100 kg, next inspection (TÜV): 06/2027, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Special equipment: Airbag, passenger side, acoustic package, electrical connection for trailer socket, armrest, driver and passenger door, exterior mirrors, electrically foldable, exterior mirrors without integrated turn signal, grab handle on the rear pillar, right side, parking brake, electric, vehicle without tachograph, vehicle without speed limiter, vehicle without cargo compartment partition, generator 250 A, cup holder, front, grab handle, B-pillar, rear lights, partially LED, folding cover for storage compartment, folding cover for storage compartments, left/right, terminal block for electrical connections (driver's seat storage box), instrument cluster with color display, charging package, dashboard (USB connections and 12V socket additionally), steering wheel with multi-function buttons, marker lights, side, smoker's package, spare wheel holder under the end of the frame including jack, mud flaps, front, seat cover/upholstery: fabric Caluma, seats in the cab: passenger seat, comfort, seats in the cab: passenger seat with lumbar support, seats in the cab: driver's seat, comfort, seats in the cab: driver's seat with lumbar support, 230V socket in the cab, fuel gauge for auxiliary heater, USB connection in the center below the dashboard (charging function only), jack, auxiliary heater (air), electric, intermediate partition, sliding cargo door Lajdpfx Aezig T Tebzjg Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard, passenger side, towing eye, rear, adaptive brake light, airbag, driver side, anti-slip regulation (ASR), indicator for washer fluid level, exterior mirrors, electrically adjustable and heated, both, outside temperature display, turn signals, front, side, automatic activation for driving lights, grab handle for sliding door on cargo compartment partition, electronic brake force distribution (EBV), driving assistance system: active brake assist, driving assistance system: breakdown management, driving assistance system: crosswind assist, grab handles, A-pillars, tailgate (opening angle 180 degrees), body/superstructure: standard van, child lock, communication module (LTE) for digital services, fuel tank: main tank 93 liters, steering wheel (steering column mechanically adjustable), headlight range adjustment, Mercedes-Benz emergency call system, engine 2.0 L - 140 kW CDI CAT, radio preparation, wheelbase 3665 mm, low emission according to exhaust standard Euro VI, sliding door, loading/passenger compartment, right, safety belt system with warning system (passenger side), safety belt system with warning system (driver side), start/stop system, engine, non-woven battery 92 Ah, preparation for DAB radio reception, maintenance interval display, Assyst, heat-protective glazing (windshield with band filter at the top), permissible total weight 4.10 t. Detailed view of the vehicle // Detailed Walkaround of the Car: ?v=Ubec9Ok87ec == New registration. High specification. == == Daily purchase of commercial vehicles and trade-in possible == Price: 42,500 EUR net.

Condition: used, mileage: 40 km, power: 140 kW (190.35 HP), first registration: 06/2026, fuel type: diesel, overall weight: 4,100 kg, next inspection (TÜV): 06/2027, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Special equipment: Airbag, passenger side, Acoustic package, Electrical system for trailer socket, Armrest, driver and passenger door, Exterior mirrors, electrically foldable, Exterior mirrors without integrated turn signal, Entry handle on rear pillar, rear right, Parking brake, electric, Vehicle without tachograph, Vehicle without speed limiter, Vehicle without load compartment partition, Generator 250 A, Cup holder, front, Grab handle, B-pillar, Rear lights, partially LED, Folding cover for storage compartment, Folding cover for storage compartments, left/right, Terminal block for electrical connections (driver's seat box), Instrument cluster with color display, Charging package, dashboard (USB connections and 12V socket in addition), Steering wheel with multi-function buttons, Marker lights, side, Smoker's package, Spare wheel holder under frame end incl. jack, Mud flaps, front, Seat cover / upholstery: fabric Caluma, Seats in cab: passenger seat, comfort, Seats in cab: passenger seat with lumbar support, Seats in cab: driver's seat, comfort, Seats in cab: driver's seat with lumbar support, 230V socket in cab, Fuel gauge for auxiliary heater, USB connection in center below dashboard (charging function only), Jack, Auxiliary heater (air), electric, Intermediate limitation of load compartment sliding door Additional equipment: 3rd brake light, Storage compartment above windshield, Storage compartment below dashboard, passenger side, Towing eye, rear, Adaptive brake light, Airbag, driver side, Anti-slip control (ASR), Display for windshield washer fluid level, Exterior mirrors, electrically adjustable and heated, both, Outside temperature display, Turn signals, front, side, Automatic activation of headlights, Entry handle for sliding door on load compartment partition, Electronic brake force distribution (EBV), Driver assistance system: active brake assist, Driver assistance system: breakdown management, Driver assistance system: crosswind assist, Grab handles, A-pillars, Rear door (opening angle 180 degrees), Body/structure: standard van, Child lock, Communication module (LTE) for digital services, Fuel tank: main tank 93 L, Steering wheel (adjustable steering column, mechanical), Headlight range adjustment, Mercedes-Benz emergency call system, Engine 2.0 L - 140 kW CDI CAT, Radio preparation, Wheelbase 3665 mm, Low emissions according to Euro VI emission standard, Sliding door, load/passenger compartment, right, Safety belt system with warning system (passenger side), Safety belt system with warning system (driver side), Start/stop system, engine, Fleece battery 92 Ah, Preparation for DAB radio reception, Service interval indicator Assyst, Heat protection glazing (windshield with band filter at the top), Permissible total weight 4.10 t Detailed view of the vehicle // Detailed Walkaround of the Car: ?v=Ubec9Ok87ec ==Daily registration. High specification.== Lajdpfezig Tysx Abzeg ==Daily purchase of commercial vehicles, as well as trade-ins possible== Price: 42,500.00 EUR net.

Condition: used, mileage: 19,393 km, power: 191 kW (259.69 HP), first registration: 09/1997, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, emission class: euro2, total width: 2,400 mm, total height: 3,260 mm, Year of construction: 1997, Equipment: ABS, compressor, MAN 15.264 Silent with METZ DLK 23-12 PLC III turntable ladder in immediately operational condition! ----First registration: 26.09.1997 Mileage: 19,393 km Operating hours: 1,170 h Chassis equipment: * Leaf/leaf spring suspension * Wheelbase 4325 mm * Permissible total weight 15 t * 8-speed manual transmission EATON * Fuel tank 127L rear * Adjustable steering wheel * Axle ratio i = 4.11 * Differential lock on rear axle * Medium-length driver's cab * Driver comfort seat with lumbar support - Make: GRAMMER * Front passenger bench, Make: GRAMMER * Exhaust tailpipe for fire department use * Engine brake * Anti-lock braking system (ABS) * Traction control (ASR) * Disc brakes for front axle (new brake discs and pads!) * Armrests on both doors * Heated driver's seat * Additional headlights and fog lights * Operating hour counter * Headrest for driver * 2 headrests for front passenger * Rear cab wall with 2 narrow windows, left and right * Heated and electrically adjustable rearview mirrors * Right side wide-angle mirror, heated * Right side kerb mirror, heated Lodpfx Aswlxbdsbzoag * Reversing camera Turntable ladder superstructure equipment: * Superstructure: Metz turntable ladder DLK 23-12 PLC III with rescue cage (rescue height approx. 30.75m). Max. elevation angle: 75 degrees, max. cage load: 270kg, rated rescue height: 23m, rated outreach: 12m, stabilizers: horizontal-vertical, stabilizer width adjustable between 2400mm and 4500mm * Complete service booklet available, all maintenance carried out annually * Front blue warning beacons and rear blue lights ----Immediately operational vehicle in well-maintained condition! Non-smoking vehicle - in good condition inside and out! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also WhatsApp Email: Subject to changes, prior sale, and errors!

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 101210/001, For sale is a VISCOM Inline-AOI S3088-III, manufactured in May 2011, serial number 101210. The system is no longer in its original technical condition from 2011. At the end of 2022, it underwent a comprehensive modernization and maintenance by a VISCOM service technician. Approximately €29,000 was invested in the modernization, including hardware, software, and service. Condition: Used, functional. Technical specifications: - Manufacturer: VISCOM AG - Model: S3088-III - Year of manufacture: 05/2011 - Serial number: 101210 - VISCOM upgrade to VEG 101 - VISCOM conversion kit RK.C.0119 - Software: vVision - System is recognized as S3088 Flex on the software side - 8M-CBW4 (4SR) Combi camera module, White Left - 4 orthogonal cameras + 4 cameras for oblique view - VISCOM Type 126.209.B.47e - vVerify - VISCOM 2D libraries - ePM interface, dongle-based, for test program creation based on Gerber data and component/part data - Import of pad geometries for post-reflow test program creation - Multilingual user interface, including German, English, French, Italian, Spanish, Portuguese, Czech, Polish, Hungarian, Romanian, Russian, Swedish, and Chinese New system computer: As part of the modernization, a new system computer was installed: Intel Core i7-11700K 32 GB RAM Windows 10 Enterprise Additionally, a new 24" touchscreen monitor from Fujitsu was installed. The following work was carried out, among other things: - VEG-101 upgrade - Installation of the new system computer - Data transfer from the previous to the new system computer - Switch to vVision - M3 annual maintenance - Cleaning of the sensors - General cleaning of the system The work performed is documented in the available VISCOM service reports and invoices. Ljdezuw R Hopfx Abzeag The scope of supply includes, among other things: - VISCOM calibration case - Calibration plates - UPS system - UPS equipped with a new RBC123 battery in August 2026 - Operating manual - Transportation manual - VISCOM service reports - Invoices for the work performed - VISCOM training materials - vVision user training materials Special feature of the machine This system is not simply an older S3088-III in its original condition. The machine has undergone extensive technical modernization and has been equipped with a new system computer, a more up-to-date VISCOM operating environment vVision, and the VEG-101 platform. The investment of approximately €29,000 in modernization, hardware, software, and VISCOM service is accordingly documented. The system is particularly suitable for companies that are looking for a VISCOM inline-AOI with extensive features and completed modernization and prefer a used system over a new machine.

Year of construction: 1994, condition: used, Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible. Lodpfx Aezun T Eebzeag

Condition: ready for operation (used), Year of construction: 2017, A Reichenbacher CNC multi-spindle woodworking center with automatic support table and vacuum pins is available. Traverse path X1/X2: 8540mm, traverse path Y1: 2500mm, traverse path Z1: 480mm, swivel B: 180°, swivel C: 360°, X3 axis: underfloor drilling unit, U2-U10: carrier movement 1-9 (gantry), axis speed X/Y/Z: 60m/60m/20m/min, turning speed B/C: 90°/s, table dimensions X/Y: approx. 8500mm/2600mm, max. workpiece weight: 150kg, max. workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9. Workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9, suction plates per carrier: 8, suction plate diameter: 100mm, carrier positioning: +/-1000mm, min. carrier distance: 300mm, total vacuum pump number: 72, vacuum pump stroke: 100mm, vacuum pump useful stroke: 25mm, tool positions: 24, max. tool weight: 6kg, max. tool length: 240mm, max. tool diameter: 300mm. Total system dimensions X/Y: approx. 15000mm/8000mm, weight: approx. 20000kg. Documentation available. On-site inspection is possible. Expected to be available from the end of September 2025. Lasdpfow Azuzsx Abzsg

Year of construction: 2006, condition: ready for operation (used), A CNC punching and laser cutting system Amada is available. Laser resonator: C-4000A, travel path X/Y: 2500mm/1250mm, laser power: 4kW, laser type: CO2, max. laser gas pressure: 4bar, max. cutting capacity: steel/stainless steel/aluminum: 25mm/15mm/10mm. Machine dimensions X/Y/Z: approx. 5700mm/2500mm/2300mm, weight: approx. 6400kg, control system: Amada. Including transformer TG515 (70kVA), cooling block, extraction system Keller Vario and beam path purging system Alphapac. Documentation available. An on-site inspection is possible. Laedpfx Asy Rtf Ujbzjg

Condition: ready for operation (used), Year of construction: 1998, A stationary Hess concrete block step tilting mold machine is available. Production area X/Y: 750mm/1500mm, production height: 300mm, board dimensions X/Y/Z: 1700mm/550mm/300mm, board material: aluminum, number of boards: 290, vibration stations: 2, vibration station type: HFZ 2500, vibration force: 89.5kN, available mold types: block step chamfer/block step Ortenau/deep curb, control system: Siemens PLC. Including transport conveyor with 180° turning device and two lifting devices, lifting ladder, transfer car, lowering ladder, board discharge, board cleaning and board buffer. The compact external vibrators were converted to load vibrators. This is a complete system with peripheral and conveyor units. Documentation vorhanden. An on-site inspection is possible. Lsdjy Rtg Sopfx Abzeag

Year of construction: 1999, condition: ready for operation (used), Offered is a CNC-controlled drilling and insertion machine. Workpiece size max.: 1350mm x 600mm x 25mm, operating pressure: 6-7bar, extraction speed: 32m/s, working height: 1000mm, control system: Ferrocontrol. Equipped with two-station machine for alternating loading, feed system for workpieces, vibratory feeder with sound-insulating hood for hinges, drilling and insertion unit, control cabinet, extraction collector. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 6240mm/4500mm/2200mm. Inspection possible by arrangement. Lodpfjy Ull Usx Abzoag

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 500mm/450mm/400mm, tool holder: CAT50, table size X/Y: 900mm/410mm, max. table load: 350kg, speed: 8000rpm, feed X/Y/Z: 15000mm/min, rapid traverse X/Y/Z: 30000mm/min, number of tools: 20, dimensions X/Y/Z: approx. 2200mm/3200mm/2500mm, weight: approx. 5000kg, control: Seicos A10M. Ledpfx Ajtufb Sobzsag