Used Performance Test Console With Transformer for sale (18,772)

Condition: good (used), -Testing device for electrical equipment Nledpfjb A Ivzsx Aa Ref -each with isolation transformer -Number: 7 available -Price: per piece

Condition: good (used), Ring variable transformer, transformer -Primary: 230 V 2.0 A 50-60 Hz -Sec: 260 V/ Nlsdpfob A N Sujx Aa Rof

Condition: excellent (used), Memmert GmbH Climate Testing Chamber / Temperature Testing Chamber Used Memmert climate testing chamber, type CTC 256, for temperature and climate testing. This unit is suitable for environmental simulation, material testing, quality assurance, research and development, as well as stress and aging tests. Technical data: Manufacturer: Memmert GmbH + Co. KG Type: CTC 256 Test chamber volume: approx. 256 liters Test chamber dimensions: approx. 640 x 597 x 670 mm (W x D x H) Housing dimensions: approx. 898 x 1100 x 1730 mm (W x D x H) Weight: approx. 320 kg Temperature range: -42 °C to +190 °C Heating rate: approx. 3.35 K/min Cooling rate: approx. 2.8 K/min Humidity function available Refrigerant: R404A Rated cooling capacity: 2.53 kW Max. operating overpressure: 30 bar Mains connection: 3/N/PE AC 400 V / 50 Hz Rated power: approx. 7.0 kW Rated current: approx. 10.6 A Equipment Programmable controller Viewing window Nedpfszlidtsx Aa Rslf Stainless steel interior Air circulation system Ethernet interface Printer connection Alarm contact 230 V service socket Shelf insert Documentation available Scope of delivery Memmert CTC 256 climate testing chamber Shelf insert Water canister Documentation / test report Accessories as shown in the pictures Condition Used, optical condition according to the pictures. (Changes and errors in the technical data are subject to change!) Subject to prior sale.

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). Nodpfeziizmjx Aa Rjlf The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: used, Huda Technology HUD-G809 Drop Shock Test System The system is also suitable for testing batteries. Max load: 100 kg Nedpfxozikb Is Aa Rjlf Table size: 500 mm x 600 mm Peak impact acceleration range (half-sine wave): 150 - 6000 m/s² Pulse duration (half-sine wave): 0.5 - 30 ms If the pulse duration is less than or equal to 3 ms, the tolerance for peak acceleration is ±20%; the tolerance for pulse duration is ±15%. If the pulse duration is greater than 3 ms, the tolerance for the waveform should comply with the range specified in the standard. Velocity tolerance: ±15% Hydraulic brake prevents secondary impact. Overall table dimensions: 1000 x 750 x 2450 mm Weight: 3600 kg Power consumption: 5.5 KVA 380V ±10% AC 50 Hz Condition: used (We reserve the right to make changes and correct typing errors in technical data and specifications!) If you have any other questions, we would be happy to answer them by phone.

Condition: used, Technical specifications (manufacturer/model type – without guarantee): Peak force: “according to manufacturer specifications” approx. ≈ 10 kN Max. acceleration: “up to approx. 1,000 m/s²” Max. speed: “typically in the range of approx. 1 m/s to a few m/s” Components: - Control cabinet TGA 022/3 - Vibration exciter SW 6507 - Power amplifier TG D 9000-000.00 - Blower Condition: used Nlsdpfx Aszikc Ssa Ref Scope of delivery: Vibration test system as shown (Subject to change and error in technical data!) For further questions, we are happy to answer your call.

Condition: excellent (used), Here we offer you a temperature test chamber. Water-cooled Technical specifications: Temperature operating range Temperature range in °C: -70 / +180°C Temperature change rate according to DIN 50 011, Part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test volume: 350 liters Test chamber dimensions (approx.): Height 750 mm, Width 650 mm, Depth 720 mm External dimensions (approx.): Height 1800 mm, Width 850 mm, Depth 1640 mm Operating data: Electrical connection: 400 V, 3/N, 50 Hz Nominal power: 13.3 kW Refrigerant: R404A / R23 Weight: approx. 650 kg Type: TS-70/350 Important safety information for buyers: The following steps are performed on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) Nsdpoziyphefx Aa Relf (Specifications subject to change and error!) Further questions can be answered by phone.

Condition: excellent (used), Vötsch Model: VT³ 4150/S Vötsch Temperature Test Chamber Water-cooled Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 11.5 kW; Rated current: 22.0 A Change rate (cooling): approx. 3.5 K/min Change rate (heating): approx. 4 K/min Temperature testing Temperature range: -40°C to +180°C Layout drawing Nsdoziyvujpfx Aa Rslf External dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test chamber dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Weight: approx. 1020 kg / 1540 liters Refrigerant: R 404A For your safety as the buyer, please note the following information! The following items are carried out on all chambers offered by us: 1. Functional inspection and replacement of necessary components 2. If needed, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Technical data and information subject to change and errors excepted!) We are happy to answer further questions by telephone.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, input voltage: 110,000 V, nominal power (apparent): 20,000 kVA, secondary voltage: 20,000 V, For sale is a high-performance power transformer from the renowned manufacturer ALSTOM. This unit is ideal for industrial power grids or as a redundancy transformer for grid operators. Key technical features: - Power rating: 20 MVA (20,000 kVA), upgradable to 25 MVA - Voltage: 110,000 V (HV) / 20,000 V (MV) / 10,000 V (LV) - Year of manufacture: 2001 (Type TC1743G) - Cooling: ONAN (option to upgrade to ONAF) - Tap changer: Equipped with high-quality MR on-load tap changer with 19 steps Weight specifications: - Total operational weight (incl. oil): 40.8 t - Dry weight (without oil): approx. 29.3 t Optional accessories such as switchgear and instrument transformers are available upon request. Nsdoyzl T Sepfx Aa Rjlf Condition & Service Options: The transformer is in operational condition. To ensure maximum operational safety, we offer the following options: ✅ Complete overhaul: Full technical refurbishment on request ✅ New paintwork: Professional repainting available Location: Cloppenburg Price: Negotiable / open to offers For inquiries or detailed documentation (test protocols, dimension sheets), please contact us. An inspection can be arranged by appointment.

Condition: good (used), mileage: 498,798 km, power: 478 kW (649.90 HP), first registration: 07/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, fridge, navigation system, onboard computer, parking heater, retarder, second fuel tank, soot filter, spoiler, = Additional Options and Accessories = - Roof spoiler - Cab - Air suspension - Particulate filter - Auxiliary heater Nljdpfxjzmxn Do Aa Rjf = Notes = Scania R650 Highline 6x4 - Manual gearbox with retarder - Full air - 2x tank Year of Manufacture: 20-7-2020 Mileage: 498798 YS2R6X40005591186 6x4 Manual gearbox Retarder Full air suspension 2x tank Navigation system Refrigerator = Further Information = Technical Information Number of cylinders: 8 Transmission Gearbox: Opti Cruise, 12 gears, automatic Axle Configuration Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 9000 kg; Steered; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 1: Tire size: 315/70R22.5; Double tires; Max. axle load: 13000 kg; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle 2: Tire size: 315/70R22.5; Double tires; Max. axle load: 13000 kg; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Weights Unladen weight: 10,664 kg Payload: 24,335 kg GVWR: 34,999 kg Condition Technical condition: good Optical condition: good

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: 218224, Abrasion testing machine from ABREX. The machine is new and was purchased a few years ago. Nljdpfxezlz Rrs Aa Rjf Operating hours: 0 hours, as we no longer have any use for this machine. Delivery conditions: Self-collection in Königsbach-Stein.

Condition: ready for operation (used), throat depth: 150 mm, overall weight: 80 kg, Reicherter Stiefelmayer BRIRO VAK Hardness Tester, including VAT. Manufacturer: Reicherter Type: BRIRO VAK Outreach: approx. 150mm Max. test height: 250 - 300mm Weight: approx. 80 kg You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Njdpfxsznh Nyo Aa Rslf Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Test Force: 98.07 N (10 kgf) Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Maximum Height: 170 mm Maximum Depth: 165 mm Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg You are welcome to arrange an inspection. We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. Nsdpfoytn Hkjx Aa Relf For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change.

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 0 mm max. module 34 min. module 1 total power requirement ca. 15 kW weight of the machine ca. 15 t dimensions of the machine ca. 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter Nledpfx Ajt Hw Aaoa Rof

Condition: excellent (used), INSTRON Spring Testing Machine / Universal Testing Machine SPRING SF1392-E1-L12-SPL Professional 100 kN testing machine for spring, compression, and material testing For sale is a used spring testing machine from the manufacturer INSTRON. The system was designed for highly precise spring, compression, and material testing. It is ideally suited for use in testing laboratories, research and development, quality assurance, and industrial manufacturing. Technical data: Manufacturer: INSTRON Type: SPRING Model: SF1392-E1-L12-SPL Serial number: SPRGK4348 Year of manufacture: 2007 Testing force: 100 kN Power supply: 240 V AC / 1~ / 50–60 Hz Line current: 25 A Control voltage: 24 V AC / 50–60 Hz Max. ambient temperature: 40 °C Dimensions: Machine (W × D × H): approx. 1,307 × 757 × 2,392 mm Sliding door with 0 mm additional opening space Base Extension Model: 2910-061 Weights: Testing machine: approx. 1,145 kg Base Extension: approx. 96 kg 5800 Controller: approx. 31.8 kg Total weight: approx. 1,273 kg 5500 Controller: Dimensions (H × W × D): 650 × 280 × 570 mm Weight: approx. 31.8 kg Equipment: 100 kN testing frame Protective enclosure with sliding door Base Extension Model 2910-061 Instron 5500 Controller Control console Industrial PC Monitor Keyboard Mouse Emergency stop system Testing platens / compression tools as shown in the images Technical documentation as shown in the images Application areas: Spring testing Compression testing Material testing Component testing Load testing Material testing Quality assurance Testing laboratory Research & Development Scope of supply: Instron SPRING SF1392-E1-L12-SPL Base Extension Model 2910-061 Instron 5500 Controller Control console Testing platens / compression tools as shown in the images Machine accessories as shown in the images Technical documentation as shown in the images Important note: To operate the system, the original Instron testing software including a valid software license is required. The software and the software license are not included in this offer. According to the manufacturer, a corresponding retrofit is required for re-commissioning. A functional test could not be performed due to the missing software. Therefore, the sale is preferably aimed at specialist companies for re-commissioning or retrofitting. Condition: Used Optical condition as shown in the images. Normal age-related signs of wear are present. The workbench shown in the photos Nodpozlp Ixsfx Aa Relf is not included in the sale. The control console and the machine accessories shown are included in the scope of supply. Transport information: Original shipping dimensions according to the manufacturer: 2,795 × 1,600 × 1,295 mm (L × W × H) Shipping weight according to the manufacturer: approx. 1,565 kg Loading by forklift is possible. Shipping by freight carrier is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone or e-mail.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C Nlsdpozhub Ajfx Aa Ref - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: new, Year of construction: 2023, Transformer substation, concrete construction, UF2742 Dimensions (L × W × H): 2.70 m × 4.18 m × 3.32 m Medium-voltage switchgear, Siemens 8DJH type • 2 ring cable feeder bays • Auxiliary switch • Short-circuit indicator • Capacitive voltage indication system Nledpfxjznmuhj Aa Ref • 1 transformer feeder bay • Auxiliary switch • Overcurrent and earth-fault protection with WIC relay • Capacitive voltage indication system Three-phase oil transformer • Type: SBG • Power: 1,250 kVA • Hermetically sealed design

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Chamber volume: approx. 29.2 m³ Equipment: - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N Nljdpfxjzpy Idj Aa Rof - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Electrical connection: AC400V / 3Ph/N/PE / 50 Hz The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.

Condition: used, Universal Shaker Angle Adapter / Adapter Devices For sale is a used accessory kit for an electrodynamic shaker or vibration test stand. The kit consists of various solid aluminum angle adapters, adapter plates, clamping devices, clamping blocks, and other accessories. The components are ideally suited for individual test specimen mounting, special designs, and use on vibration test stands and vibration testing systems. Technical data: Manufacturer: unknown Type: Accessory kit for electrodynamic shaker / vibration test stand Material: predominantly aluminum Design: angle adapters, adapter plates, clamping devices, and fasteners Equipment: Several solid angle adapters Adapter plates of various sizes Clamping and fastening devices Clamping blocks and adapter elements Nlsdpjzpx Ucjfx Aa Rof Fastening material and other accessories as shown in the pictures Solid aluminum construction Threaded holes and clearance holes Universally applicable Areas of application: Electrodynamic shakers Vibration test stands Vibration testing Material testing Environmental simulation Research and development Automotive industry Test specimen mounting and special designs Scope of supply: Complete accessory kit as shown in the pictures Angle adapters Adapter plates Clamping devices Clamping blocks Fastening material Other accessories as shown in the pictures Condition: Used. Visual condition as shown in the pictures. Normal signs of wear and tear, as well as scratches and indentations, are present. Transport: Only the accessories shown in the pictures are sold. The table or other items not explicitly mentioned in the pictures are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Shaker Fixture Cube / Clamping Cube made of Aluminum Manufacturer: Unknown Type: Shaker Fixture Cube / Fixture Block / Clamping Cube Material: Aluminum Machine Type: Clamping cube for vibration test benches / vibration testing External dimensions: approx. 240 × 240 × 240 mm For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube was developed for use on electrodynamic vibration test benches and serves for the secure fastening of test specimens, measuring setups, and special devices. Due to the precision-machined clamping surfaces and the numerous threaded holes on all sides, the fixture cube is ideally suited for testing laboratories, research institutions, mechanical engineering, the automotive industry, and aerospace technology. Technical data: Manufacturer: Unknown Material: Aluminum Design: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 mounting holes: Ø approx. 80 mm Central through hole Precision-machined clamping surfaces Threaded holes on all side surfaces Heavy-duty industrial design Dimensions: External dimensions (W × D × H): approx. 240 × 240 × 240 mm Material: Aluminum Features: Precision-machined clamping surfaces Nlsdpfx Aezp E Dkja Rjf Threaded holes on all side surfaces Four large mounting holes Central through hole Heavy-duty aluminum construction High stiffness for dynamic loads Suitable for individual test setups Application areas: Vibration test benches Vibration testing Environmental testing Testing laboratories Research and development Mechanical engineering Automotive industry Aerospace technology Shipping data: Dimensions (W × D × H): approx. 240 × 240 × 240 mm Shipping via parcel service possible by arrangement. Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Shaker Fixture Cube made of aluminum Scope of delivery as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Weiss TS 130 Temperature Shock Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: TS 130 Machine Type: Temperature Shock Test Chamber Test Chamber Volume: approx. 130 liters Operating Hours: approx. 108.7 hours For sale is a used Weiss TS 130 temperature shock test chamber with S!MCON/32 control system. The two-chamber system enables rapid temperature changes between a hot chamber and a cold chamber. The test specimen is moved between the chambers using a lift basket. Suitable for temperature cycling and temperature shock tests, material testing, quality assurance, electronics testing, as well as research and development. Temperature Data: Temperature Range Hot Chamber: +60 °C to +220 °C Temperature Range Cold Chamber: −10 °C to −80 °C Switching Time between Hot and Cold Chamber: approx. 10 seconds Temperature Stability: approx. ±1 K Test Chamber: Test Chamber Volume / Lift Basket: approx. 130 liters Dimensions Lift Basket (W × D × H): approx. 500 × 600 × 450 mm Maximum Load of Lift Basket: 20 kg Maximum Load per Insert Shelf: 10 kg Electrical Data: Nedpfx Aozp D D Noa Rjlf Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 14.0 kW Rated Current according to Nameplate: 26.0 A Connection: CEE 32 A Recommended Fuse: 35 A slow-blow Protection Class: IP20 Refrigeration System: Refrigerant: R404A, Filling Quantity 2.2 kg Refrigerant: R23, Filling Quantity 1.2 kg Maximum Low Pressure: 18 bar Maximum High Pressure: 25 bar Standing Pressure: 11 bar Cooling Water Data: Water Inlet Pressure: 2–6 bar Connection: R 1/2 inch Cooling Water Consumption at Full Load: approx. 0.3–0.6 m³/h Maximum Particle Size: 40 µm Dimensions and Weight: External Dimensions (W × D × H): approx. 1,820 × 900 × 1,990 mm Width Including Door Hinge: approx. 1,850 mm Depth Including Removable Door: approx. 1,155 mm Additional Depth of Removable Touch Panel: max. 170 mm Weight of Test Chamber without Options: approx. 950 kg Weight of Separate Cooling Unit: not determined Equipment: S!MCON/32 control system with external touch panel Two-chamber design with lift basket Viewing window Adjustable temperature limiter Digital and analog I/O RS232 and RS485/RS422 interfaces Potential-free contact Connection for external Pt100 sensor Separate cooling unit as shown in the pictures SIMPATI 3.0 software and extensive documentation as shown in the pictures Condition and Scope of Supply: Used Operating hour counter shows approx. 108.7 hours. Optical condition as shown in the pictures. Scope of supply includes separate cooling unit, software, documentation and accessories, exclusively as shown in the pictures. Loading and shipping via forwarding agent possible upon agreement. Subject to changes, errors and prior sale.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2006, loading space length: 13,650 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,960 mm, color: green, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Rear doors - Air suspension - Disc brakes - Toolbox - Two rear doors = Notes = HEAVY DUTY KRONE SDP 27 13.60 METER CURTAINSIDE TRAILER WITH SLIDING ROOF, SAF AXLES & DISC BRAKES!! SAF AXLES!! DISC BRAKES!! ABS BRAKE SYSTEM!! ETC. SIZE: LENGTH x WIDTH x HEIGHT; Approx. 13.65 x 2.50 x 2.70 M (INSIDE)!! SLIDING ROOF!! EXTRA STORAGE HOLES IN FLOOR!! BACK DOORS!! MORE TRAILERS (ALL TYPES) IN STOCK FOR SALE, > 75 TRUCKS/TRAILERS IN STOCK!! SHIPMENT, TRANSPORT, LOADING, STACKING OR TRANSIT REGISTRATION? NO PROBLEM FOR US, WE ARE AN "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( / ) YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further information = Axle configuration Tire size: 385/65R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 3: Max. axle load: 9000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Weights Unladen weight: 7,100 kg Payload: 33,900 kg GVW: 41,000 kg Nodpfx Aaozqil Ij Rslf Functional Body brand: KRONE SDP 27 CURTAINSIDE WITH SLIDING ROOF Loading platform height: 120 cm Maintenance, history and condition APK (technical inspection): valid until 08.2027 Technical condition: very good Optical condition: very good Identification License plate: OJ-67-DJ Further information Please contact the Sales Department for further information.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, controller model: Simatic S7-1500, total length: 8,480 mm, film width: 460 mm, roll diameter: 400 mm, machine/vehicle number: 20-042, production capacity: 10 unit/h, No minimum price – guaranteed sale to the highest bidder! The new price of the thermoforming vacuum packaging machine was EUR 255,000 plus VAT! TECHNICAL DETAILS Film Bottom film width: 460 mm Bottom film: Soft film PA/PE, max. 350 µm Top film width: 455 mm Top film: Soft film PA/PE, max. 100 µm Film roll diameter, top film, max.: 400 mm Film roll diameter, bottom film, max.: 400 mm Performance and format Draw length: 300 mm Thermoforming depth, max.: 190 mm Adjustable output: 7 - 10 cycles/min MACHINE DETAILS Control system Touch panel: 12" Controller: Simatic S7-1500 Operating language: German Electrical and media connections Mains voltage: 400 V Mains frequency: 50 Hz Compressed air consumption: approx. 600 - 1,250 l/min Compressed air connection: 3/4" - DN 19 Cooling water consumption: approx. 80 - 150 l/h Water connection: 1/2" - DN 13 Machine dimensions Tool spacing: approx. 3,900 mm Free infeed path: approx. 1,997 mm Machine length: approx. 8,480 mm Outfeed belt, usable length: approx. 550 mm Machine height: approx. 1,965 mm EQUIPMENT Modular construction made of stainless steel Standard film rolls with a film core diameter of 3" / 76 mm Kne lever system for the forming and sealing station Memory-programmable controller with a swiveling operating terminal Nlsdpszkgbyofx Aa Ref Fumigation system SWZ with a stainless steel tank and a storage volume of 5 liters Safety devices with magnetic and light curtain protection Automatic lubrication system for the film transport chain Outfeed belt Intralox Blue 950 mm, usable length 550 mm Format parts for several packaging and forming sizes

Condition: excellent (used), Two cast resin dry-type transformers, FRANCE TRANSFO SCHNEIDER ELECTRIC, with Schneider Electric low-voltage capacitor banks, Recti Mat 2 panel. 1250 kVA and 800 kVA / 15,000 Volts / 15 kV. Manufactured in 2003 and 2002, as new and in excellent condition. Nsdpfszq Spvox Aa Relf

Condition: good (used), Year of construction: 2011, functionality: fully functional, cooling capacity: 380.9 kW (517.88 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,147 kg, input voltage: 400 V, total width: 2,300 mm, total length: 5,350 mm, total height: 2,450 mm, warranty duration: 6 months, AIRCOOLED CHILLER TRANE CGAM140 380.9 KW Cooling capacity: 380.9 kW / 108.3 tons (12/7 — 35°C) Year of manufacture: 2011 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss CSHN315 (scroll) + 2 pcs. Danfoss CSHN250 (scroll) Type of refrigerant: R410A Number of fans: 8 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump Wilo, buffer tank 762 l, expansion vessel 60 l. Dimensions: 5.35x2.3x2.45 m Weight: 4147 kg Working hours: 7343/3545/6326/7990/5866/6489 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Nsdpfx Aajzqzrgo Rslf After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.