Used Pinacho Sts18-180 for sale (6,218)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,750 mm, loading space width: 2,480 mm, total length: 9,925 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: -, tire condition: 100 %, Additional Information Tandem Platform Trailer Type TPS 180, Standard construction with forklift mount Chassis: Central axle trailer Fine-grain steel welded construction Outer frame slightly angled, new design with Load-Lock profile for securing tie-down straps 1 pair of geared support legs at the front, with straight lower part and single-sided operation on the right-hand side Partial wheel arches 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock Mount for a carried forklift at the rear, including 2 fork pockets, 2 extendable support tubes, and a mount for chain securing with a locking pin. Underrun protection with light unit that can be folded away. The forklift mount shifts the axles to the rear; please consider load distribution when driving without a forklift. Customer risk! Note! Forklift mount! Carrying a forklift can significantly reduce the vertical load. Counterweight at the front is required! On wet and slippery roads, additional ballast weight or a load at the front of the trailer, weighing at least 2 tons, is necessary; the speed should then be reduced, and the driving style adapted to the road and driving conditions. The forklift must always be secured with chains during transport. The distance between the lift mast and the trailer body should be a maximum of 45 mm, or the vertical forklift tines must rest against the forklift pockets at the end. We assume that the towing vehicle does not have a steering or lift axle, or that the steering axle is always locked or the lift axle is always on the ground. Coupling System: Central axle trailer Drawbar with tested 50 mm drawbar eye, freight forwarding design Lower coupling on the drawbar Folding mount with spring support on the drawbar, for guiding the connecting cables to the truck Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axle/suspension to reduce tire wear and fuel consumption Air suspension with raise and lower valve 1st axle: automatic lift axle with proximity switch, for lift axle Wheels and Tires 385/65R22.5, according to manufacturer's choice Nodjndwdhspfx Aniecu Steel rims, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake Vehicle - Driving Stability System Duomatic connection at the front, with connecting cable to the towing vehicle, connection on the right-hand side EBS, Electronic Braking System with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights in LED, side yellow LED lighting, license plate lighting in LED

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21801012090, empty load weight: 2,800 kg, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: silver, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Trailer for Roll-Off Containers * High-tensile steel welded chassis construction * Sliding frame system: * The container is loaded from the rear onto the sliding frame and pushed forward * Front container stop adjustable for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for the transport of roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Rear impact protection, mounted vertically on left and right side, with delta rubber buffers on underrun protection brackets * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension with raise-and-lower valve ### Wheels & Tyres Ncedpfxszggico Anieu * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Drive-away protection: opening the container locking system automatically activates the spring-loaded parking brake * Vehicle Stability Control System * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 additional LED work lights at the rear, activated via reverse gear * 2 x 7-pin non-interchangeable front plugs with connecting cable ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Tube diameter outside: 180 mm -Piston: Ø 115/145 mm -Stroke: 620 mm -Weight: 87 kg Ncsdpjb A H Ryjfx Anieu

Condition: excellent (used), CTS TV-70/530 Climate Test Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TV-70/530 Machine type: Climate test chamber / Shaker chamber Test chamber volume: approx. 530 liters For sale is a used climate test chamber from CTS Clima Temperatur Systeme GmbH. The system was developed for combined temperature and vibration tests and is suitable for environmental simulation, material testing, electronics testing, quality assurance, as well as development and stress tests. Note: Shaker/vibration exciter is not included in the offer. Technical data Test chamber dimensions: approx. 850 x 730 x 860 mm (W x D x H) Ncjdpfozd Uq Ajx Aniju External dimensions: approx. 1450 x 2250 x 2000 mm (W x D x H) Weight: approx. 1,200 kg Temperature range: -70 °C to +180 °C Heating rate: approx. 5 K/min Cooling rate: approx. 5 K/min Refrigerant: R404A / R23 Rated power: 16 kW Rated current: 29.1 A Equipment Shaker chamber for combined tests Test chamber prepared for vibration applications Cascade refrigeration system Temperature testing Accessories as shown in the pictures Application areas Temperature testing Combined climate and vibration testing Environmental simulation Electronics testing Material testing Quality assurance Research and development Scope of supply 1x CTS TV-70/530 climate test chamber Scope of supply as shown in the pictures Condition Used Optical condition as shown in the pictures Shaker/vibration exciter is not included in the offer. Items, machines or other accessories shown in the pictures that are not explicitly described are not included in the scope of supply. Scope of supply as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: excellent (used), Here we offer a Weiss climate test chamber. Nedpfx Anezd Ulteiscu Designation: SB2/500/80, water-cooled Cold-heat operation: -75°C ... +180°C Climate operation: +10...+95°C Humidity range: 10...98 % RH Temperature stability, over time: ± 0.2K Humidity stability: ±1 % RH Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Connections: left side: ∅ 100 mm right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerant: R404a / R23 For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: SB2/500/80 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a Thermotron environmental test chamber. Thermotron environmental test chamber, water-cooled Working area volume: 227 liters Temperature uniformity: All models 0.7°C Temperature range: -70°C to +180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx. 400 kg Internal dimensions: Width 610 mm x Depth 610 mm x Height 610 mm External dimensions: Width 890 mm x Depth 1240 mm x Height 1850 mm Humidity range: All models 10% to 98% RH Humidity control: All models 2.5% RH Heating time in minutes -65º to 71ºC: 17 Heating time in minutes -65º to 180ºC: 43 Heating time in minutes -40º to 85ºC: 16 Electrical requirements in full load amps 230/3/60: 19 Electrical requirements in full load amps 230/1/60: 25 Electrical requirements in full load amps 220/1/50: 27 Ncodpfxezd Snre Aniou Cooling time in minutes 85º to -40ºC: 32 Cooling time in minutes 71º to -65ºC: 54 Cooling time in minutes 180º to -65ºC: 72 Compressor size: (2) -2 Hp Operating voltage: 400V 16.7 A Type: SM-8-8200 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Here we offer you a Thermotron temperature chamber. Water-cooled Thermotron Temperature Chamber SE-1000-6-6 Internal dimensions (W x D x H): 1000 x 1000 x 980 mm Working chamber volume: approx. 980 liters Temperature range: -70ºC to 180ºC Overall heating rate: approx. 4.1 K Overall cooling rate: approx. 1.2 K Heating capacity (°C/min) -65º to 71ºC: 6.8°C Heating capacity (°C/min) -65º to 180ºC: 5.6°C Heating capacity (°C/min) -40ºC to 85ºC: 6.5°C Cooling capacity (°C/min) 85ºC to -40ºC: 4.7°C Cooling capacity (°C/min) 71ºC to -65ºC: 3.7°C Cooling capacity (°C/min) 180ºC to -65ºC: 4.3°C External dimensions (W x D x H): 1250 x 1900 x 2200 mm Electrical requirements: 400V / 5P / N / PE, 35 A Refrigerants: R508B and R404A Approximate weight: 900 kg Type: Thermotron SE-1000-6-6 Important information for you as a buyer: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate Njdpfxjzd R T Ho Aniecu 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Subject to change and errors in the technical data and information!) If you have any further questions, we will be happy to assist you by phone.

Condition: excellent (used), Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Nsdozd R Tgopfx Anijcu Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Side feedthrough: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R 452A and R 23 Weight: approx. 570 kg Type: VTS 7034-5 For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: used, functionality: fully functional, operation weight: 147 kg, Hand-operated agitator cooker: + Green + Type HR 180i + Burner output: 50 kW Ncodszgbknjpfx Anieu + 152 cm x 115 cm x 135 cm (l x w x h) + Weight: 147 kg Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, functionality: fully functional, machine/vehicle number: JUN4888, Year of construction: 2007, operating hours: 14,370 h, load capacity: 18,000 kg, lifting height: 3,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,350 mm, power: 173 kW (235.21 HP), fork length: 1,800 mm, empty load weight: 26,860 kg, total length: 7,050 mm, drive type: Diesel, construction width: 3,050 mm, Side loader Chassis number: JUN4888 Load center: 900 Fork width: 200 mm Fork thickness: 100 mm Mast type: Standard Transmission: Hydrostatic Condition: Ready for use and fully functional Technical condition: normal Front tire type: Pneumatic Front tire size: 14.00-24 Front tire condition: 60 - 80% Rear tire type: Pneumatic Rear tire size: 14.00-24 Rear tire condition: 60 - 80% Nodeyulh Uopfx Anijcu Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container stackers, reach stackers, forklifts and terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, hire purchase and financing at favorable terms are always possible for us. We also gladly purchase your used vehicles, even if you do not purchase a vehicle from us. Call me, Marco Levermann, and I will be happy to provide you with detailed advice on this MAKE - MODEL. By the way: Our forklift specialist workshop specializes in the repair and maintenance of large equipment from 8 tons upwards. We also offer consignment sales for your vehicle. 3rd valve, 4th valve, full cabin.

Condition: used, functionality: fully functional, machine/vehicle number: JUN4888, Year of construction: 2007, operating hours: 14,370 h, load capacity: 18,000 kg, lifting height: 3,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,350 mm, power: 173 kW (235.21 HP), fork length: 1,800 mm, empty load weight: 26,860 kg, total length: 7,050 mm, drive type: Diesel, construction width: 3,050 mm, Diesel forklift Chassis number: JUN4888 Load center: 900 Fork width: 200 mm Fork thickness: 100 mm Mast type: Standard Transmission: Hydrostatic Condition: Ready for use and fully functional Technical condition: Normal Ncjdpfeyulh Iox Anieu Front tire type: Pneumatic Front tire size: 14.00-24 Front tire condition: 60 - 80% Rear tire type: Pneumatic Rear tire size: 14.00-24 Rear tire condition: 60 - 80% Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container forklifts, reach stackers, forklifts, and terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, hire purchase, and financing at fair conditions are always possible for us. We would also be happy to buy your used vehicles, even if you do not purchase a vehicle from us. Call me, Marco Levermann, and I will be happy to provide you with detailed advice on this MAKE - MODEL. By the way: Our specialist forklift workshop is specialized in the repair and maintenance of large equipment from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale. 3rd valve, 4th valve, full cabin.

Condition: used, Stephan MCH D 180 Microcutter Ncjdpfx Anozdqi Usiou This high-performance continuous microcutter from Stephan is a versatile emulsifying machine widely used in the food industry. It is ideally suited for the meat, pet food, baby food, convenience food, plant-based (vegan), vegetable, and fruit processing industries. The continuous cutter processes large quantities of product at high speed into a homogeneous mass while simultaneously ensuring effective mixing of ingredients. The cutting size can be adjusted using interchangeable cutting rings, allowing the production of both fine and coarse emulsions. This microcutter is equipped with a large 200-liter feed hopper positioned at a convenient working height, enabling direct product transfer from a bowl cutter. The emulsifier is mounted on wheels for easy mobility within the production area. The machine is constructed entirely from stainless steel. Specifications: - Production capacity: Up to 6,000 kg/h (depending on product type, particle size, and feed rate) - Hopper capacity: 200 L - Equipped with a double cutting system - Supplied with cutting rings: 0.7 mm and 0.5 mm - Hopper infeed height: 910 mm - Power supply: 400 V (3-phase + Neutral, 50 Hz) - Power rating: 75 kW - Weight: 977 kg - Year of manufacture: 2007 Machine Dimensions (W × D × H): 2220 × 1120 × 1060 mm

Condition: excellent (used), CTS C-70/350 Climate Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: C-70/350 Equipment Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Testing Chamber Volume: approx. 350 liters For sale is a used CTS C-70/350 climate testing chamber from an industrial application. The system is suitable for temperature and climate testing, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development. Technical Data: Temperature Range: -70 °C to +180 °C Climate Operating Range: +10 °C to +95 °C Humidity Range: 10 % to 98 % RH Dew Point Range I: +7 °C to +94 °C Dew Point Range II: -10 °C to +7 °C Temperature Stability (over time): ≤ ±0.3 K Humidity Stability I: ≤ ±1.5 % RH Humidity Stability II: ≤ ±3 % RH Cooling Rate: approx. 3.5 K/min Heating Rate: approx. 3.5 K/min Max. Heat Radiation at +20 °C: approx. 3000 W Testing Chamber Dimensions: approx. 650 x 720 x 750 mm (W x D x H) External Dimensions: approx. 920 x 1665 x 1800 mm (W x D x H) Weight: approx. 550 kg Power Connection: 400 V, 3/N, 50 Hz Connected Load: approx. 7.1 kW Rated Current according to Nameplate: approx. 11.5 A Protection Class: IP22 Sound Pressure Level: < 58 dB(A) Refrigerant: Pre-cooling Stage: R404A, approx. 2.3 kg Cooling Stage: R23 Operating Pressure PS: 25 bar Test Pressure PT: 20 bar Equipment Touch Control Panel Viewing Window in the Door Interior made of Stainless Steel Testing Chamber Lighting Insert Grid made of Stainless Steel Feedthrough Ø 50 mm on the right, center Capacitive Humidity Measurement System Software Temperature Limiter Min. / Max. USB Port for Data Storage Ethernet Interface RS232 Interface Air-cooled Design Documentation / Operating Manual Service / Inspection Condition: Used Optical Condition as shown in the pictures Normal signs of wear and tear from use and storage Scope of Delivery CTS C-70/350 Climate Testing Chamber Insert Grid Control Panel / Controller Nedpfx Aezd D Nzjniocu Documentation / Operating Manual Accessories as shown in the pictures Inspection possible after prior appointment. Shipping or freight shipping possible. Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: excellent (used), Vötsch VC 4034 Climate Chamber / Temperature Chamber Description: For sale is a used climate and temperature chamber from the manufacturer Vötsch Industrietechnik. This unit is suitable for demanding temperature and climate tests in research, development, quality assurance, the electronics industry, automotive technology, as well as material and aging tests. The test chamber has been converted to the modern refrigerant R452A and features a user-friendly touch panel control. Thanks to the large test chamber volume of approximately 335 liters, the system is suitable for both individual test specimens and for extensive test setups. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) External dimensions: approx. 780 x 1758 x 1800 mm (W x D x H) Weight: approx. 515 kg Temperature range: -40 °C to +180 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±1.5 K Heating rate: approx. 3.2 K/min Cooling rate: approx. 3.5 K/min Ncsdpfxezd Dm Hj Aniju Climate operation: Temperature range: -40 °C to +180 °C Humidity range: 10 % to 98 % RH Temperature deviation over time: ±0.1 to ±0.3 K Temperature homogeneity spatially: ±0.5 to ±1.0 K Refrigerant: R452A Filling quantity: 2.5 kg GWP: 2141 CO₂ equivalent: 5.35 t ND max.: 22 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Equipment: Touch panel control Programmable test sequences Stainless steel interior Viewing window in the door Test chamber lighting Air circulation system Side feedthrough for measuring cables Several stainless steel insert shelves Air-cooled refrigeration system Documentation available Application areas: Temperature testing Climate testing Material testing Electronics testing Aging tests Environmental simulation Quality assurance Research and development Automotive testing Condition: Used Optical condition as shown in the pictures. Maintenance and calibration stickers are present. Refrigeration circuit converted to R452A. Scope of supply: 1x Vötsch VC 4034 Climate Chamber Stainless steel insert shelves Touch panel control unit Documentation / Documents Accessories as shown in the pictures Subject to changes and errors in the technical data. Subject to prior sale.

Condition: excellent (used), Type: VCS 7034-5 Climate Test Chamber Water-Cooled Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3,000 W / at -20°C: 3,000 W Temperature calibration points: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1.0 K Ncodpoxufypofx Aniou Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Humidity deviation over time: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climatic calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width: 580 mm, Depth: 765 mm, Height: 750 mm External dimensions: Width: 870 mm, Depth: 1595 mm, Height: 1775 mm Feedthroughs: 1 x approx. 50 mm Ø, left side 2 x approx. 125 mm Ø, left side 1 x approx. 125 mm Ø, right side Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R404A / R-23 For your security as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Ncsdpfx Ansxwaz Heieu

Condition: ready for operation (used), Winter service attachment for Piaggio / Pfau: Ncsdpjuyhk Aefx Anieu - Pfau LBS 180 snow plow - Mounting bracket with electro-hydraulics and lifting cylinder - incl. lower link and swivel cylinder Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: excellent (used), functionality: fully functional, mileage: 830,000 km, fuel type: diesel, overall weight: 10,000 kg, wheelbase: 4,200 mm, fuel: diesel, brakes: engine braking, color: white, emission class: euro3, Year of construction: 2006, Equipment: ABS, air conditioning, airbag, fog lights, full service history, spoiler, RENAULT 100-180 Truck Platform with tarpaulin cover Year: 07/2006 2 axles, 4x2 Platform with tarpaulin cover Manual transmission Platform length: 6,300 mm Nsdpfjzgxzwox Anijcu Wheelbase: 4,200 mm Overall truck length: 8,1335 mm Gross vehicle weight: 10,000 kg Payload capacity: 5,100 kg Engine: 4,116 cm³ Power: 128 kW (174 HP) Emission standard: Euro 3 Tires: 225/75 R 17.5 – 129/127 M Air conditioning ABS Engine brake Spoiler Radio Electric mirrors and windows Mileage: 830,000 km

Condition: excellent (used), Here we offer a Heraeus Vötsch temperature control chamber. Heraeus Vötsch temperature control chamber, water-cooled Nedpfozdtd Ijx Aniecu Test chamber volume: 110 liters Test chamber dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (cooling): 3.2 K/min Temperature change rate (heating): 3.5 K/min Refrigerant: R-404 A / R 23 Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 1.8 kW Rated current: 12 A Type: VT 7011 For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature testing chamber. Heraeus Vötsch temperature testing chamber, water-cooled Temperature range: -70°C to +180°C Temperature deviation (time-related): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±2.0 K Temperature change rate (cooling): 7.5 K/min Temperature change rate (heating): 7.5 K/min Thermal compensation +20°C: 3000 W Thermal compensation -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 10.5 kW, Rated current: 22 A Fuse, on customer side: 32 A, slow-blow Sound pressure level at 1 m distance (free-field measurement): < 69 dB(A) Side access: 50 cm / 125 cm Chamber is water-cooled Ncsdpfx Ajzdtdhsnisu Refrigerant: R 404A and R 23 Weight: approx. 460 kg Type: VTS 7018-5 For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. Refilling with refrigerants that comply with legal regulations 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Drive . kW Capacity . kg/h material . 6 pieces originally for manipulator AMP1000 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Ncodpfjzdu Tqox Anieu

Condition: used, Drive . kW Capacity . kg/h material . Bandages Trelleborg 2 pieces Bandages Vorwerk 2 pieces For AMP 1000 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Ncsdpfxozdu Tkj Anieu More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Drive . kW Capacity . kg/h material . 4 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Nsdpjzdu Smefx Anijcu More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Drive . kW Capacity . kg/h material . 4 pieces For Manipulator AMP1000 Ncjdozdu Sgepfx Aniou The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2019, operating hours: 3,577 h, condition: excellent (used), Weiss Climatic Test Chamber ClimeEvent C/1000/70/5 Type: C/1000/70/5 Manufacturer: Weiss Technik GmbH Year of Manufacture: 2019 Design: Water-cooled Operating Hours: approx. 3577 h For sale is a Weiss ClimeEvent climatic test chamber with a 1000-liter test chamber. Suitable for temperature and climate tests in industry, automotive, electronics, as well as research and development. Temperature and climate data: Temperature range: approx. -70 °C to +180 °C Temperature change rate: up to approx. 5 K/min Humidity range: approx. 10 % to 98 % RH Test chamber: Volume: approx. 1000 liters Internal dimensions: approx. 950 x 1100 x 950 mm Ncodpsy Iyx Asfx Anieu Dimensions: External dimensions: approx. 2000 x 1415 x 2030 mm Electrical data: Mains connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 21 kW Rated current: approx. 34 A Refrigerant: R449A / R23 Weight: approx. 1300 kg Application: Temperature tests Climate tests with humidity Temperature cycling tests Endurance tests Condition: Used The device was last in operation Scope of delivery: Weiss ClimeEvent C/1000/70/5 Accessories as shown in the pictures Inspection possible by arrangement. Loading can be organized. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.