Used Por A 100 for sale (80,429)

Condition: used, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 05/2025, loading space length: 1,975 mm, loading space width: 1,444 mm, total width: 1,550 mm, total height: 600 mm, A28 GW26GA00654 Manufacturer: STEMA, Model: MT 750 BS3, 100 km/h... and much more. Redpfx Asyn Ugyod Ast Loading height: 580 mm Errors and prior sale excepted.

Condition: used, maximum load weight: 1,115 kg, overall weight: 1,500 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 3,010 mm, loading space width: 1,670 mm, loading space height: 161 mm, total width: 2,200 mm, total height: 1,185 mm, * Universal transporter by Pongratz, type L-PAT 300/16 G-K, vehicle transporter, gross weight: 1,500 kg, with loading ramp, low loader, overrun brake, and much more. Errors and prior sale excepted. Rodjyn Uggepfx Ad Aet

Condition: used, maximum load weight: 1,905 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 04/2020, loading space width: 2,007 mm, total width: 2,382 mm, total height: 511 mm, A22 GW26D024902 Well-maintained car transport trailer Redpfsyn Uchox Ad Ast gross vehicle weight 2,600 kg, wooden floor, 2.4m loading ramps, manual cable winch WAP 901, overrun brake, 100 km/h, LED lighting Vehicle not prepared Errors and prior sale excepted

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, loading space height: 115 mm, total width: 2,540 mm, total height: 500 mm, A25 GW26NG000031 Car transport trailer, manufacturer STEMA, type FTAK 27-40-21.2, Gross weight: 2,700 kg, with overrun brake, WAP901 hand winch, low loader, hydraulically tiltable. Rjdpfxjyn Ucbj Ad Aot Main frame: Extremely sturdy and torsion-resistant with crash-tested safety V-drawbar. Tiltable, robust frame construction with safety locks. All frame parts are hot-dip galvanized for corrosion resistance. Running rails: Extra wide, perforated, non-slip running rails made of galvanized sheet with large elongated holes for secure fixing of tie-down straps. The extra-wide track allows easy transport of vehicles with different wheelbases. Integrated drive-on ramps facilitate easy loading and unloading. Side panels: Signal red powder-coated (corrosion-free and scratch-resistant) for enhanced safety. Vehicle not reconditioned ...and much more. Errors and prior sale reserved.

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, loading space height: 115 mm, total width: 2,540 mm, total height: 640 mm, A26 GW26NGA00003 Passenger Car Transport Trailer, Manufacturer: STEMA, Model: FTAK 27-40-21.2 Gross Weight: 2,700 kg, inertia-braked, WAP901 hand winch, low-loader, hydraulically tiltable. Base frame: Extremely robust and torsion-resistant with crash-tested safety V-drawbar. Tiltable, sturdy frame design with safety locks. All frame components are hot-dip galvanized for corrosion resistance. Running rails: Extra-wide, perforated, non-slip zinc-plated running rails with large elongated holes for securely fastening tie-down straps. The extra-wide rail makes it easy to transport vehicles with different wheelbases. Integrated ramps allow for easy loading and unloading. Side walls: Signal red powder coating (corrosion-proof and scratch-resistant) for enhanced safety. Rodpsyn Ubqofx Ad Aot Vehicle not refurbished ...and much more. Errors and prior sale excepted.

Condition: used, maximum load weight: 895 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 07/2021, loading space length: 1,975 mm, loading space width: 1,275 mm, total width: 1,960 mm, total height: 590 mm, A29 GW26G000232 Motorcycle trailer for 3 motorcycles, Manufacturer: STEMA, Model: SHM 13-25-18.1, * 100 km/h version with installed shock absorbers * Integrated ramp rail in every standard version * Low loading platform and long ramp rail * Convenient loading and unloading * Smooth driving behavior and robust chassis * Stable wheel brackets for secure motorcycle support * Side rails (optional) * Numerous additional lashing points * Manufactured according to EC regulations * Side underrun protection bars on both sides 1,300 kg, high-loader, inertia braked, 100 km/h, high-loader, for 3 vehicles, with 2 loading ramps behind the license plate, converted to 13" tires Redpfx Ajyn Ub Dsd Aot Loading height: 580 mm Errors and prior sale excepted.

Condition: excellent (used), For sale: Professional milling toolholder by ORION – high German manufacturing quality. • Type SK40 Ø6-100 • DIN 69871 AD standard – central cooling • Collet for Ø6 mm • Length 100 mm • Includes tool (milling cutter / drill bit) • Very good used condition, fully functional ORION toolholders are a reliable choice for CNC machining centers and milling machines with SK40 taper. PRICE IS FOR 1 PIECE. Rjdpoxcgxvjfx Ad Aot

Condition: used, maximum load weight: 509 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 2,950 mm, loading space width: 1,600 mm, loading space height: 120 mm, total width: 2,240 mm, total height: 830 mm, Multitransporter 3016, manufacturer TEMARED, model DMC, gross weight: 750 kg, 295x160 cm, with overrun brake, 100 km/h (accessory), with foldable loading ramp (accessory), low loader, height-adjustable. Subject to errors and prior sale. Rjdjym Ih Ijpfx Ad Aot

Condition: used, maximum load weight: 569 kg, overall weight: 850 kg, axle configuration: 1 axle, first registration: 01/2025, loading space length: 2,016 mm, loading space width: 1,275 mm, total width: 1,770 mm, total height: 3,024 mm, A8 GW26 00158 kg, low-loader trailer, with overrun brake, 100 km/h, for 3 motorcycles, with side railing, ramp... and much more. Redpfoym Ifyox Ad Aot 580 mm loading height Subject to errors and prior sale.

Condition: used, maximum load weight: 1,037 kg, overall weight: 1,500 kg, axle configuration: 1 axle, first registration: 05/2022, loading space length: 3,070 mm, loading space width: 1,830 mm, loading space height: 600 mm, total width: 1,900 mm, total height: 600 mm, A10 GW26G000366 Rodpfxjym Ifgs Ad Ast Vehicle transport trailer by STEMA, model Carrier XL 15-30-18.1, Registration no.: L-AH 142, chassis no.: WSEHARF41NG000366, GVW: 1,500 kg, high-loader, with overrun brake, 100 km/h, 2 loading ramps behind the license plate, new tires Errors and prior sale excepted.

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester Redpfx Adjyc H I Ss Ajt • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: used, empty load weight: 3,310 kg, maximum load weight: 3 kg, overall weight: 6,500 kg, tire size: 285/65R18, tire condition: 50 %, color: orange, total length: 435 mm, Year of construction: 2009, front tire size: 285/65R18 | 50%, rear tire size: 285/65R18 | 50%, operation weight: 6,500 kg, maximum speed: 60 km/h, Equipment: air conditioning, Tyres (front): 285/65R18, Tyres (rear): 285/65R18, First registration: 25.11.2009, Automatic towing hitch. We are offering a used Hansa APZ 1003 L transporter tool carrier from the year 2009 with approx. 40,000 km and approx. 3,600 operating hours for sale. Equipment: 133 HP, registered as LOF (agricultural or forestry) tractor tool carrier, tyres 285/65R18, diesel, rotating beacon, four-wheel steering, tipper platform. The machine has the following defects and is being sold as a handyman's vehicle: - Right rear axle drive shaft defective - Steering cylinders on front and rear axles leaking and piston rod damaged - Hydraulic oil loss in the area of the hydraulic cooler. Further details available on request. Location: 93095 Hagelstadt. Redpfxoyq Ayae Ad Ajt

Year of construction: 2004, condition: ready for operation (used), Axes: XYZ (3-axis), travel X/Y/Z: 950mm/500mm/450mm, speed: 8000rpm, rapid traverse: 40m/min, spindle nose: SK40, table size X/Y: 580mm/1150mm, max. table load: 900kg, tool holder: BT40, tool capacity: 24, control: Heidenhain iTNC 530. dimensions X/Y/Z: approx. 2400mm/4400mm/2700mm, weight: approx. 5000kg. Redstufb Ijpfx Ad Ast

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, New filling machine / dosing machine, suitable for filling a variety of liquids. Examples include: - Milk - Water - Alcohol - Disinfectants - Etc. This is a robust machine that operates on compressed air and 220V, Plug and Play! It is ideally suited for filling small batches. Only a very small air compressor is required to operate the machine; if desired, this can be supplied as well. We recommend at least a 12L compressor. The filling machine is equipped with a 1000ml cylinder, allowing it to dispense a maximum of 1000ml per stroke. For larger volumes, multiple strokes can be programmed. For example, 2500ml can be easily filled in 2 x 1250ml. The minimum dosage per stroke is 100ml; any volume between 100 and 1000ml can be filled in a single stroke. We also offer models with cylinders up to 5000ml per stroke. Rodpfx Adorivxcs Ajt The unit comes with a suction hose, enabling direct suction from a barrel or IBC container. The machine features a foot pedal and an automatic mode. In automatic mode, the machine will continuously fill, making it simple and fast to handle larger quantities. The foot pedal allows for manual filling at your own pace. Depending on the operator and the volume per fill, between 15 and 25 units per minute can be filled, making this a very fast machine. The machine weighs approximately 15-20kg and can be conveniently placed on a table. Entirely constructed from stainless steel, it is a very high-quality, industrial-grade machine. For questions, please feel free to email; we are happy to assist with this or another machine. We also supply a labelling machine which is a perfect match for the filler. We strive to respond to your inquiries within 24 hours. Of course, we are also available by phone. Our office hours are Monday to Friday, 09:00–17:00.

Condition: excellent (used), For sale: professional ORION milling toolholder – German quality and precision. • Type SK40 Ø10-100 (Weldon) • Standard DIN 69871 AD/B – spindle-through coolant • Total length 100 mm • Tool clamping for Ø10 mm (side screw) • Includes tool – milling cutter / drill bit (visible in photo) • Very good condition, used, fully functional. ORION toolholders are an ideal solution for CNC machining centres and milling machines with SK40 taper. Rodpjxcgytsfx Ad Ajt

Condition: excellent (used), For sale: professional ORION milling holder – German precision and top-quality workmanship. • Type SK40 Ø8-100 K • DIN 69871 AD/B standard – central coolant supply through the spindle • Weldon clamping (side screw) for Ø8 mm tools • Total length 100 mm • Very good condition, used – fully functional • Complete with tool (milling cutter / drill as shown in the photo) Ideal for CNC machining centers and milling machines with SK40 taper. Redpfxexcgygj Ad Aot

Condition: excellent (used), Professional tool holders from the renowned brand GARANT (Hoffmann Group). Model 300230 6 SK40-6-100 – clamping diameter Ø6 mm, length 100 mm. • SK40 taper – CNC standard • Clamping diameter Ø6 mm • Holder length 100 mm • Maximum rotational speed 25,000 rpm • High precision and clamping stability • Used, fully functional and ready for work. -- PRICE LISTED FOR 1 PIECE -- Rjdpfx Adsw Sy D Es Aet

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Rsdpfx Adoxl Rgie Ajt

Condition: good (used), The scope of delivery includes: Rjdjibzftspfx Ad Aet 01x pallet rack traverse, used Material color: orange IPE profile: 100 x 55 mm agraffe: 3 drillings clear width: approx. 2.700 mm 3 holes per agraffe hole spacing: approx. 100 mm diameter of holes: approx. 11 mm 01x Set screw material consisting of: 06x screws M10 06x nuts 06x washers

Condition: new, Included in delivery are 100x double web closure, brand new for 35 mm webbing Material color: sendzimir galvanized Rsdjpuz I Sopfx Ad Ast Total length: approx. 83 mm Total width: approx. 54 mm inner width: approx. 35 mm material thickness: approx. 4,00 mm breaking load: 1.600 Kg Weight | Piece: 0,090 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Technical Data for Pallet Rack Beam: Racking System: Polypal Type: Stockpal Scope of delivery includes: 01x Pallet rack beam, used Design: Top beam Material color: orange Box profile: 100 x 50 mm Rodpfx Adsxzyi Sj Aot Type: SKVBN 09850NP22 Connector: 2 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load 02x Safety pins, used Version: Fully galvanized For securing the longitudinal beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping of this item is required, this will incur additional costs, which can be requested from us depending on the delivery location and scope.

Condition: good (used), Technical data for pallet rack beam: Racking system: SSI Schäfer Type: PR600 Included in delivery: 01x Pallet rack beam, used Material color: RAL 5010 gentian blue Box profile: 100 x 40 mm Beam type: TRV1-270-104-30 CE Bracket: 5 HK (hooks) Clear span: approx. 2,700 mm Max. load per pair of beams: 2,400 kg, with evenly distributed load. 02x Safety pins, used Version: completely galvanized For securing the crossbeams Your contacts in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Rsdpfxswp Dzwo Ad Aot General information about the item: This item is only offered for pick-up. Any desired transport or shipment of this item is associated with additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: Rodpfx Asi A Ik Ijd Ast 01x mounting bracket, used Surface: hot-dip galvanized weight: 2,26 kg | pcs. Screw-on plate: 100 x 120 x 10 mm ( with 4 round holes Ø 10 mm ) screw-on flange: 120 x 140 x 10 mm ( 1 slotted hole 62 x 15 mm )

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data of the pallet rack traverse: Shelving system: Redirack Included in delivery are: 01x pallet rack traverse, used Material color: yellow U-profile: 100 x 50 mm design: head traverse clear width: 2.707 mm 02x safety pins, used execution: completely galvanized To secure the longitudinal beams Against unintentional lifting out General information about the article: Rjdpjh S H N Uefx Ad Aet This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), The scope of delivery includes: 01x pallet rack traverse, used Material color: orange IPE profile: 100 x 55 mm agraffe: 5 drillings clear width: approx. 2.700 mm Per agraffe: 5 drillings hole spacing: approx. 50 mm diameter holes: approx. 11 mm 01x Set screw material Rjdpfsibzgxjx Ad Ajt consisting of: 10x screws M10 10x nuts 10x washers