Used Pressure Filler 16Er for sale (16,700)

Condition: new, ABEL contact pressure gauge for ABEL piston diaphragm high-pressure pumps. pump monitor, NEW ! Itodpfx Asiyp S Ijg Aon We are your service and spare parts partner for ABEL pumps. Almost all spare parts are available from stock or at short notice.

Condition: new, ABEL air feed fitting on the pressure side for piston diaphragm high-pressure pumps. NEW ! Ijdpoiyp Tzofx Ag Aotn We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice.

Year of construction: 2003, condition: reconditioned (used), Machine inspected. Disassembled and ready for container transport (2). Wear-resistant liners. New bearings. Throughput capacity of 160 tons per hour. 50 kW to 150 kW motor, depending on requirements. Current installed motor: 75 kW. Iedpfx Asizkxwjg Aetn

Condition: good (used), Year of construction: 1994, functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, ESTRELLA DN 1000 GLASS-LINED PRESSURE NUTSCHE FILTER High-quality pharmaceutical/chemical pressure nutsche filter manufactured by Estrella AG, Switzerland. Manufacturer: Estrella AG, Ettingen, Switzerland Year: 1994 Type: Pressure Nutsche Filter / Pressure Filter Diameter: DN 1000 Filter area: approx. 0.75 m² Material: Steel, highly acid-resistant, glass-lined Glass lining quality: ESTRELLA 2000 Isdpfxsu U Afuo Ag Aetn The unit is equipped with a heavy-duty hydraulic lifting and tilting system for opening the vessel. The hydraulic system is manually operated and integrated into the robust steel frame. Main equipment: - DN 1000 pressure nutsche filter - Approx. 0.75 m² filtration area - Acid-resistant, glass-lined steel construction - ESTRELLA 2000 glass lining - Large, hydraulically lifted and tiltable top cover - Manual hydraulic pump - DN 1000 x 370 top cover - DN 1000 x 550 center section - DN 1000 x 370 bottom section - Filter / perforated plate - 2 x DN 100 connections with sight-glass fittings - 3 x DN 50 connections on top cover - DN 50 bottom connection - Additional fittings and pressure gauge - Heavy-duty steel support frame According to the original manufacturer documentation, the ESTRELLA 2000 glass lining was high-voltage tested for porosity in accordance with DIN ISO 2746. The glass-lined surfaces are visually in very good condition. The blue enamel lining shows a clean and well-preserved appearance. The machine originates from pharmaceutical production. Original Estrella documentation, drawings, and historical manufacturing documents are partially available. Further technical documentation is currently being located and will be supplied if available. The original purchase price in 1994 was CHF 59,218 net, excluding transport and taxes. Inspection of the unit is possible at our warehouse in Switzerland by appointment. CYCRON GmbH Switzerland

Condition: used, Abel Piston Diaphragm High-Pressure Pump as Feed Pump, used Model: TH-G332-200/2 Features: including drive unit Description: Robust and high-performance industrial piston diaphragm pump. This unit is ideally suited for demanding conveying tasks such as slurries, suspensions, or abrasive media. Manufacturer: ABEL Year of manufacture: 1993 Flow rate: approx. 30 m³/h Operating pressure: up to 1.5 MPa Motor power: 15–18.5 kW Stroke rate: approx. 50 min⁻¹ Stroke length: 150 mm Equipment: Electric motor with drive unit, Ijdpsy Exqlsfx Ag Aetn - Pulsation damper / pressure vessel - Piping & valves - Lubrication unit - Completely mounted on base frame Condition: used, tested (see inspection sticker) Applications: industry, mining and mineral processing, tunneling, chemical, wastewater treatment Availability: immediately ex stock, inspection by appointment possible

Condition: good (used), functionality: fully functional, Can diameter range: 52 mm – 99 mm Iedozpyfvjpfx Ag Ajtn Can height range: 50 mm – 140 mm Number of stations: 15 Capacity: up to 200 – 225 cans per minute

Condition: used, Year of construction: 1997, Overview This ALWID Matador-HV linear filling machine was manufactured in 1997 and is designed for filling liquid products into various bottle formats in small to medium production environments. The machine operates with a high-vacuum filling principle, enabling level-controlled filling and ensuring consistent fill heights. The filler is equipped with five filling stations and achieves a capacity of approximately 1,000 bottles per hour at 0.7 L. One advantage of the system is that the filler itself does not require format parts, allowing flexible processing of different bottle sizes. The associated capping system can process both PP screw caps and swing-top closures (grip corks). For this purpose, the machine includes two cap sorting bowls, one for each closure type. Approximately ten format sets are available for the capper, covering round and square bottles from 0.2 L to 1.0 L. With its conventional control system and robust mechanical design, the ALWID Matador-HV is a reliable solution for beverage, spirits, or specialty liquid filling applications. Technical Data Manufacturer: ALWID Model: Matador-HV Machine type: Linear filling machine (high-vacuum filler) Year of manufacture: 1997 Filling principle: High-vacuum filling with level control Number of filling stations: 5 Capacity: approx. 1,000 bottles per hour (at 0.7 L) Bottle formats: 0.2 L – 1.0 L Bottle shapes: Round, Square Cap types: - PP screw caps - T-Cork closures (grip corks) Cap sorting systems: - 2 sorting bowls (PP caps / grip closures) Format sets (capper): approx. 10 sets Control system: Conventional control Itodpfx Aoyuufpog Asn Condition: Used 

Condition: used, Year of construction: 1993, Overview  Isdpfxjy Etd To Ag Astn This filling monobloc was manufactured in 1993 by the companies PERRIER / GANGLOFF / ZALKIN / CTA. The machine is designed for filling still water and was originally configured for glass bottles and later retrofitted for PET bottles. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. In 2006, an air filtration system (CTA DA001) was added. The CIP system is integrated. Technical data  - Capacity: approx. 6,000 bph (1.5 L) - Formats: 0.5 L / 1.5 L - Application: Filling of still water (PET bottles) - Configuration: 16 rinsing heads / 20 filling valves (atmospheric) / 6 capping heads - Neck finish: 30/25 - Incl. Cap feeder, Air filtration system, CIP system

Condition: used, Year of construction: 1997, Overview This rotary pressure filling machine was manufactured in 1997 by NATE. The Veral 60-12 is designed for the filling and closing of beer and carbonated beverages in glass bottles. The machine operates as a pressure filler with vacuum pre-evacuation, ensuring stable filling conditions for carbonated products. It has been fully overhauled in 2023, including reconstruction of filler, capper and vacuum pump. The machine is not yet in production after rebuild and is prepared for PLC and control system integration (not included).  Technical data - Capacity: approx. 20,000 bph (500 ml) - Formats: 0.5 L long neck / 0.66 L / 1.0 L - Application: Filling of beer and carbonated beverages - Configuration: 60 filling valves / 12 capping heads - Filling system: Pressure filling with vacuum pre-evacuation - Filling pressure: approx. 0.05 – 0.06 MPa Itedey Azrtepfx Ag Aen - Product temperature: approx. 1 – 7 °C - Material: Stainless steel (AISI 304 / 316)

Condition: excellent (used), Gravity-Fed Linear Filler – Stainless Steel Automatic, gravity-fed linear filler made of stainless steel, designed for the continuous filling of liquid products into bottles, jars, and other rigid containers within industrial packaging lines. The equipment incorporates multiple filling nozzles arranged in a line, allowing for the simultaneous processing of several containers. The product is dispensed by utilizing gravity, providing a simple and efficient solution for low-viscosity liquids and products with good flow characteristics. Its construction primarily in stainless steel, integrated conveyor, and protected filling area make it particularly suitable for professional applications in the food and beverage industry. MAIN FEATURES -Type: Automatic, gravity-fed linear filler -Filling system: Gravity feed -Linear, multi-nozzle configuration -Simultaneous filling of multiple containers -Automatic container feeding -Controlled positioning under the nozzles -Integrated infeed and outfeed conveyor -Continuous industrial operation -Construction primarily in stainless steel -Product distribution circuit -Enclosed filling area with guards -Hygienic design for the food industry -Compact and robust construction -Integrable into automatic packaging lines PROCESS The containers are automatically transported to the filling area, where they are positioned under the different nozzles. Once positioned, the filling process is carried out using gravity, taking advantage of the height difference and the natural flow of the product to introduce it into the containers. At the end of the cycle, the containers are released and automatically continue to the next stage of the line. This filling principle is particularly suitable for liquid and fluid products with low viscosity. It can be integrated with: Container feeders Feed tanks Transfer pumps Capping and sealing machines Twist-off closing machines Weight checkers Inspection systems Labeling and coding machines Iodpfezxch Sex Ag Astn Case packers and end-of-line equipment APPLICATIONS Particularly suitable for food industries, beverage manufacturers, canning companies, liquid sauce producers, and packaging companies that need to automate the filling of fluid products. Depending on the installed configuration and the characteristics of the product, it can be used for water, juices, beverages, vinegars, brines, oils, liquid sauces, and other low-viscosity products. Its linear, multi-nozzle configuration, gravity-fed filling, and stainless steel construction provide a versatile solution for industrial packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), AVE RRT 24-24-6 Triblock – Automatic Rinsing, Filling, and Capping Machine AVE RRT 24-24-6 automatic triblock in stainless steel, designed to integrate the rinsing, filling, and capping operations of containers into a single machine within industrial bottling and packaging lines for liquid products. Itodpfx Aezxcq Hog Aen Manufactured by AVE, the equipment combines three consecutive process stages in a compact, rotary configuration: hygienic preparation of the container through rinsing, product dosing, and subsequent application and sealing of the cap. The 24-24-6 configuration provides multiple workstations to achieve a continuous flow of containers and reduce transfers between independent machines. MAIN FEATURES -Manufacturer: AVE -Model: RRT 24-24-6 -Type: Automatic rinsing, filling, and capping triblock -Configuration: 24-24-6 -24 rinsing stations -24 filling stations/valves -6 capping heads -Rotary and continuous operation -Automatic container feed -Synchronized transfer between the different stations -Integrated transport system -Construction primarily in stainless steel -Perimeter enclosure with safety guards -Hygienic design for the food industry -Compact construction for line integration -Designed for continuous industrial production PROCESS Containers automatically enter the AVE RRT 24-24-6 and pass successively through the three main operations. First, the containers are positioned in the rinsing section, where they are prepared before filling. Subsequently, they are transferred to the 24-valve filling section, where the product is dosed. Finally, the containers pass to the 6-head capping station, where the cap is automatically placed and sealed before being discharged to the next stage of production. APPLICATIONS Particularly suitable for manufacturers of beverages, juices, water, liquid food products, and other bottling industries that require concentrating several operations into a single automatic machine. It can be integrated with: Container feeding systems Tanks and product preparation systems Cap feeders Conveyors Pasteurizers Labeling and coding machines Inspection systems Case packers and end-of-line equipment The combination of rinsing + filling + capping in a single AVE RRT 24-24-6 triblock provides a compact solution for automatic bottling and packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2025, condition: excellent (used), 2025 heavy duty stationery hot water pressure wash system. Recently removed from a closed food factory, they had several of these outside the main building to wash separate areas of the factory. 175 bar pressure, 1,260 litres per hour max flow. 8.2Kw motor and 115 Kw boiler. Frost protected to -20 degrees C. This is the newest one which was only used for a short time, we also have two from 2017 and 2019 both in nice condition. Itsdpfszt N R Njx Ag Ajn

Condition: new, Keller RECO RM-DPC Micro 10000 ATEX Differential Pressure Switch 8000280026 NOS New differential pressure switch / differential pressure controller RM-DPC Micro 10000 ATEX from RECO, listed here as a spare part for Keller Lufttechnik. Operating and installation instructions are available. Manufacturer: RECO Gesellschaft für Industriefilter-Regelung mbH Affiliation: Keller Lufttechnik GmbH + Co. KG Type: RM-DPC Micro 10000 ATEX Article number: 8000280026 Keller PN: 10602307 Device type: Differential pressure switch / differential pressure controller Measuring range: 0–10,000 Pa Analog output: 4–20 mA Supply: 24 V DC or 110/230 V AC ATEX marking: II 3D Ex tc IIIC T85°C Dc Degree of protection according to nameplate: IP6X Ambient temperature: -20 to +60 °C ATEX certificate: BVS 03 ATEX E 144 X Design: Wall mounting Manufacturer's marking: 607334 001 / 2021 Itedpfxezxrq Aj Ag Ajn Condition: new / unused

Condition: used, Year of construction: 2010, fuel type: diesel, power: 88 kW (119.65 HP), gearing type: mechanical, color: white, number of standing places: 3, Equipment: 3rd hydraulic function, ABS, airbag, all-season tires, lighting, trailer coupling, I am offering a Peugeot Boxer diesel panel van, 2.2 / 88 kW, first registered in July 2010, with 171,000 km, a 6-speed manual transmission, and a trailer hitch. It is being sold because I am switching to different technology. !The vehicle does not have a valid MOT (technical inspection), is registered, and is ready to drive. It has green license plates! Ijdpfxezwmfro Ag Aetn The vehicle is equipped with a belt-driven auxiliary drive and a Dynaset HPW hydraulic high-pressure water pump. It includes a high-pressure cleaning system up to 180 bar, a high-pressure lance, a 1000-liter tank, and automatic hose retraction. Signs of wear are present.

Condition: used, Year of construction: 2012, Overview This Krones Modulfill filling and capping monoblock, manufactured in 2012, is designed for the filling and closing of glass bottles in beverage production lines. The machine is equipped with 60 filling valves and 12 capping heads and is specified for an output of approx. 15,000 bottles per hour. The machine was observed in operation with a current output of approx. 14,990 bottles/hour. It is adjusted for 0.75 l and 0.33 l glass bottles. The capping machine is suitable for plastic screw caps. The system is operated via a Krones iPanel CD and is installed in a stainless steel and glass safety enclosure. Operating data indicate 41,381 operating hours. Isdpszcga Usfx Ag Aotn Technical Data - Manufacturer: Krones AG - Machine Type: Filling and capping monoblock - Model / Identification: Krones Modulfill - Year of Manufacture: 2012 - Application: Filling and closing of glass bottles - Adjusted to Bottle Sizes: 0.75 l (Ø75mm x 265mm) and 0.33 l (Ø65mm x 175mm) - Filling System: Volumetric filling - Filling Valves: 60 - Capping Heads: 12 - Closure Type Observed: Plastic screw cap - Target Output: approx. 15,000 bottles/hour - Operating Hours: 41,381 h - Production Counter: 40,754 h - Control Interface: Krones iPanel CD - Electrical Supply: 400 / 230 V - Current Type: AC 3/N/PE - Frequency: 50 Hz - Full Load Current: 36 A - Construction: Stainless steel and glass safety enclosure - Condition: Used, observed in operational production environment

Condition: reconditioned (used), functionality: fully functional, operating pressure: 800 bar, empty load weight: 130 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, Kärcher HDS 695 S Eco Hot Water Pressure Washer New heating coil The unit comes with new accessories, including an R+M (German brand) spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 170 bar and a flow rate of 800 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features unique photos; you are buying the exact machine shown. Technical Data: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 800 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 85–155 Connected load [kW]: 5.9 Detergent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW heating coil NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE Isdpfxoz Ainme Ag Aetn KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct detergent dosing via the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service Water softener tank (for RM110) prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, operating pressure: 180 bar, input voltage: 400 V, fuel: electricity, overall weight: 32 kg, warranty duration: 6 months, KÄRCHER HD 8/18-4M ST PRESSURE WASHER YEAR 2021 The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-braided hose, and an adjustable nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With operating parameters of 180 bar and 760 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features individually taken photos; you are buying the exact machine shown. TECHNICAL DATA: Power supply: 3-phase - 400 V - 50 Hz Itedpfxez Aryro Ag Asn Flow rate (l/h): 760 Operating pressure (bar): 180 Max. pressure (bar): 200 Connected load (kW): 4.6 Weight (kg): 32 Dimensions (L x W x H) (mm): 290 x 300 x 565 Hose length (m): 10 EQUIPMENT: NEW durable spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 10m steel-braided high-pressure hose NEW adjustable nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Highly legible and... intuitive control panel Its simple design and easy access to internal components make the machine user-friendly and easy to service.

Condition: like new (used), The Telemecanique XMG pressure regulator is used to regulate pressure in pneumatic systems. It is suitable for use on machines and equipment in the woodworking industry or similar applications. Technical data: Itedpfezzlh Tsx Ag Aen - On request

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, HAMMELMANN® Aquajet 50™, HDP503™, manufactured in 2023, approximately 800 operating hours. Installed in a 20´ soundproof container. Scania® diesel engine, 566kW, Stage V, AdBlue™. ES4™ control unit. 1600 bar / 166 liters. Fully inspected. Ideal for hydrodemolition robot applications and industrial cleaning (TRG 1600 XL). Trailer not included. Iodpfszy Hahsx Ag Aetn

Condition: like new (used), Carruthers Six-pak 46000 Six station volumetric filler Isdpokl Hrqofx Ag Ajtn Serial: 46025 Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Itjdpfx Ajqqz Txsg Ajn

Condition: good (used), Allfill SHA15 Auger filler Itsdpfx Agsvhcx Hs Aon Refurbed in 2023, touch screen control, stainless, auger filler variable speed or continuous fill, 75Kg stainless hopper with 50mm stainless screw discharge, with level detection, with foot pedal, Previously used inline with elevator screw for filling the hopper, 3Ph

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade plastic tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; filling range: 1-250ml; accuracy: ±1%; tube diameter: 10-50mm (one mould is required for each tube diameter); tube length: 50-200mm; number of filling heads: 1; storage hopper capacity: 40L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 7kW; compressed air: 0.4-0.6MPa; machine dimensions: L1950xW760xH1850mm; machine weight: 950kg. Itedjv Nldbjpfx Ag Ajn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; filling range: 1-120ml; accuracy: ±1%; tube diameter: 10-28 mm (one mould is required for each tube diameter); tube length: 50-180 mm; number of filling heads: 1; storage hopper capacity: 40L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 3.1kW; compressed air: 0.4-0.6MPa; machine dimensions: L1950xW750xH1850 mm; machine weight: 900kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Iedpfxev Nldho Ag Aetn

Condition: new, Year of construction: 2025, Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml; volume of hopper: 30L; number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Itodpfxsv Nnl Ij Ag Asn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.