Used Promess Servopress Recalibrated Dms for sale (465)

Condition: used, Year of construction: 2001, Technical details: pressure: max. 275 bar stroke length max.: 600 mm weight: 1,5 t dimensions L x W x H: 2,8x0,6x0,6 m hydraulik operation cylinder - outer dimensions hydr. cylinder diameter=300 x 830mm - outer dimension operation cylinder diameter=360 x 750mm - stroke cylinder diameter 160 x 600mm Pgedpju N E Rfofx Abyel equipment: - 1 hydraulic connection 1/2" - 2 fixing flanges (490x490mm) - 4 supports (Dm=60 x 800mm) - 2 sheet covers for flanges 600x600x80mm *

Year of construction: 1991, condition: used, Technical details: x-axis: 500 mm z-axis: 685 mm diameter: 300 mm air pressure - required: 5 bar tool table-turnable: 360° Tool table: Dm=745 mm tool diameter: ca. 290 mm total power requirement: 0,5 kW weight of the machine ca.: ca. 0,15 t space requirement of the machine approx.: 2,38x1,45x1,94 m Adjustment- and Measuring Device - measuring range z = 680mm - measuring range x = 500mm - pneumatical slide clamping - manual endless fine adjustment - turret rotating table - 220V/; 50/60Hz accessories: - taper 1x SK40 and 2 x SK 45 + chisel holder and adapter - brochure Sold as is. EDP not connected - hard disk and software missing * Podpsu N An Iefx Abyjgl

Year of construction: 1989, condition: used, Technical details: Pressure max.: 30 MPa volume flow rate: 70 cbm/min. electrics - voltage/frequency: 380 / 3Ph ~ V/Hz tank capacity: 50 dm³ l machine weight approx.: 120 kg connected load: 0,62 kW dimensions L x W x H: 0,7 x Ø 600 x 1,3 m Application: Pressing grease into grease nipples Pedpeu Nft Hjfx Abyogl Size of grease reservoir: 460 x 620mm Size of the press Ø 345 x 540mm Connection via bayonet mount Handling/operation with hand gun and 3.8 metre hose with ON/OFF switch The grease gun is mobile, equipped with handrail with two-hand grip and 220 V socket. *

Condition: used, Technical details: Pgodju Ngtbepfx Abyel max. dia. of grinding wheel: 175 mm revolution per minute: 2750 m/sec. boring diameter: 20 mm number of stations: 2 Stück total power requirement: 0,4 kW weight: 15,4 kg space requirements of the machine approx.: L:380xB:252xH:270 mm technical data: - 4 holes Dm= 10mm are available at the base for mounting on the worktable. - VEM CS 175 motor with 220/380V-50Hz; (1,9&1,1A) Protection class P33, - connector plug CEE 16 Equipment: - with grinding surface and grinding protection on both sides On sale as is!, without test run! *

Condition: used, Year of construction: 1993, Technical details: motor capacity: 7,5 kW revolution per minute: 2860 U/min extraction suction socket - diameter: 200 mm electrics - voltage/frequency: 380 V/Hz weight of the machine approx.: 235 kg dimension machine xH: 1,0x1,0x1,65 m Psdpfx Aju Nu Exobyegl Dust Suction Device - impeller Dm = 600x160mm - impeller = 360mm Intake: - intake conical dia = 250x200x200mm - collar dia = 250mm Exhaust opening: - dia = 250mm; Collar dia = 310mm Accessories: - 3x wall clamps dia = 140mm - 90 ° arc dia = 250x600mm - 1x spare belts 15x1500mm *

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m Pgodpfeu Nfibox Abyjl This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Machine is not functional and is on sale as is! *

Condition: used, Technical details: Pgsdpfx Abju Nfnwoyol pressure: 80 t dayligth: 600 mm ram stroke: 200 mm pressure: 30 t dayligth: 680 mm ram stroke: 300 mm distance between columns: 1060 mm base plate surface area: 1060x600 mm table above floor: 720 mm ram stroke speed: Stößel/ Ram 1: 40 mm/sec ram stroke speed: Stößel/ Ram 2: 95 mm/sec base plate surface area: Dm=150 mm total power requirement: 13 kW weight of the machine ca.: 4,5 t space requirement approx.:: L:1,6xB:1,1xH:3,4 m - Press with two ram with 30 t + 80 t - foot control - documentation *

Condition: used, Technical details: throat min.: 2600 mm throat max.: 4200 mm Support arm position: 360 schwenkbar ° Pgedpou Nwyrjfx Abyol weight of the machine ca.: ca. 1,75 t dimensions L x W x H: L:5,0xB:1,6xH:2,8 m space requirements of the machine approx.: 6,61x1,4x2,8 m WELDING STATIVE for positioning a welding torch/welding source on large wide workpieces. - The device for adjusting the gas cylinder is integrated in the frame. - Dm of the base frame = 1480mm - All adjustments are made manually. - With welding device Make: KOLBE; Type: SC 400 - 400A; protection P21; cooling E; input 380V/21kVA; welding 400V / 34V; water cooled; - Welding steps: 3x coarse and 12x fine - feeding device (removable) with 13,5m cable to the welding device - Hose package water cooled (4,0Meter) *

Condition: used, Year of construction: 2015, bed width 350 mm turning length 1.000 mm control Manual plus 620 Heidenhain Pedpfsyvkr Aex Abyjgl greates pass round over bed 430 mm Swing dia. over traverse guideway 220 mm turning speed range - main spindle 1 - 3.600 min/-1 power capacity - main spindel 9 / 11 kW max. Torque ca. 200 Nm spindle head DIN 55027 / 6 spindle diameter in front bearing 110 mm spindle bore 80 mm usable bar diameter max. 80 mm System MultiFix Shank diameter 20 x 20 mm x-axis 230 mm z-axis ca. 1.000 mm diameter of quill 70 mm quill stroke 150 mm taper of center MK 5 hollow fix: 12 -150 mm hollow var: 12 -125 mm rapid traverse X: 10 / Z: 7 m/min feed power X: 4 / Z: 5 kN weight of the machine ca. 3,2 t dimensions of the machine ca. 2,8 x 2,1 x 1,9 m Lathe cycle controled SEIGER - SLZ 420 E / 1000 - WITHOUT three-jaw chuck - Impulse lubrication Flow rate: 0.1 l/min, Pump pressure: 30 bar, Tank capacity: 2 dm³

Condition: used, mileage: 222,600 km, power: 375 kW (509.86 HP), first registration: 01/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Tipper hydraulics, dual-circuit system with tipping lever in the cab. * Moving floor hydraulics * Fully service history maintained * PTO (PTR-DM, medium speed), gearbox-mounted, connection: 1 DIM rear for pump. ----Volvo FH 500 I-SAVE. New Tachograph 4.1 installed! ----* Additional cab insulation * 12-speed automatic transmission * VEB+ (Volvo Engine Brake+) * Rear axle differential lock * Rear axle air suspension * Anti-lock braking system (ABS) * Eco-Cruise Control (cruise control): including brake cruise control * Electronic Stability Program (ESP) * Disc brakes * Smoke detector in the cab * Roof hatch and emergency exit, electrically operated * Battery master switch * Adaptive cruise control (ACC), collision warning & emergency braking function * Lane keeping assistant (LSS-DW) * Globetrotter XL cab * Transparent external sun visor * Heated rear view mirrors * Refrigerator in the cab * Electric windows for driver and passenger doors * Cab suspension, air-sprung * Nearside mirror with close-range camera on passenger side * Electrically adjustable mirrors, driver and passenger side * Immobilizer (transponder) * Volvo I-Shift gearbox * Automatic climate control * Heated driver's seat * Volvo I-ParkCool (integrated stationary air conditioning) * Rear axle air suspension, 4 airbags * 6-cylinder engine * Telematics gateway with 4G * 285-liter fuel tank * 650-liter fuel tank * 65-liter AdBlue tank * LED main headlights * Headlight cleaning system * Engine version Euro 6, E Podpfx Abjy A Ubnsyogl * Turbo compound * Fifth wheel coupling lighting on mounting bracket, white LED * Aluminum rims * Air-suspended driver's seat * Additional warm air heating * Driver's airbag * Lower bunk * Upper bunk * Assistance and emergency call service with voice channel * Driver comfort package * EBS * No spare wheel ----Sale to commercial customers only! No liability for the information provided! Subject to prior sale! Only our general terms and conditions apply! We will be happy to provide you with a leasing or financing offer.

Condition: used, mileage: 222,600 km, power: 375 kW (509.86 HP), first registration: 01/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Tipper hydraulics, dual-circuit system with tipping lever in the cab. * Moving floor hydraulics * Fully service history maintained * PTO (PTR-DM, medium speed), gearbox-mounted, connection: 1 DIM rear for pump. ----Volvo FH 500 I-SAVE. New Tachograph 4.1 installed! ----* Additional cab insulation * 12-speed automatic transmission * VEB+ (Volvo Engine Brake+) * Rear axle differential lock * Rear axle air suspension * Anti-lock braking system (ABS) * Eco-Cruise Control (cruise control): including brake cruise control * Electronic Stability Program (ESP) * Disc brakes * Smoke detector in the cab * Roof hatch and emergency exit, electrically operated * Battery master switch * Adaptive cruise control (ACC), collision warning & emergency braking function * Lane keeping assistant (LSS-DW) * Globetrotter XL cab * Transparent external sun visor * Heated rear view mirrors * Refrigerator in the cab * Electric windows for driver and passenger doors * Cab suspension, air-sprung * Nearside mirror with close-range camera on passenger side * Electrically adjustable mirrors, driver and passenger side * Immobilizer (transponder) * Volvo I-Shift gearbox * Automatic climate control * Heated driver's seat Pgjdpfx Absy A Ubzjyjl * Volvo I-ParkCool (integrated stationary air conditioning) * Rear axle air suspension, 4 airbags * 6-cylinder engine * Telematics gateway with 4G * 285-liter fuel tank * 650-liter fuel tank * 65-liter AdBlue tank * LED main headlights * Headlight cleaning system * Engine version Euro 6, E * Turbo compound * Fifth wheel coupling lighting on mounting bracket, white LED * Aluminum rims * Air-suspended driver's seat * Additional warm air heating * Driver's airbag * Lower bunk * Upper bunk * Assistance and emergency call service with voice channel * Driver comfort package * EBS * No spare wheel ----Sale to commercial customers only! No liability for the information provided! Subject to prior sale! Only our general terms and conditions apply! We will be happy to provide you with a leasing or financing offer.

Condition: new, functionality: fully functional, power: 4.8 kW (6.53 HP), fuel type: gasoline, overall weight: 550 kg, maximum load weight: 500 kg, lifting height: 1,020 mm, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, tilting carriage, Mini Track Dumper HT500Y-4 Compact professional dumper with lifting function – now with a 10% promotional discount The Mini Track Dumper HT500Y-4 is the ideal solution for construction, gardening and landscaping, agriculture, and work in confined spaces. Thanks to its rubber tracks, hydraulic tipping mechanism, and powerful lifting function, the dumper is extremely off-road capable, stable, and easy to operate. The machine impresses with its compact design, high load capacity, and a reliable Briggs & Stratton gasoline engine. 🔥 PROMOTION: 10% DISCOUNT ON ALL TRACK DUMPERS Take advantage of our current sales promotion: 10% discount on all track dumper models – for a limited time only, while supplies last! The HT500Y-4 is ready for immediate use and offers a powerful combination of performance, maneuverability, and ease of operation. ⚙️ Technical Data Engine & Drive Engine: Briggs & Stratton Engine Type: 1-cylinder, OHV, 4-stroke, air-cooled Displacement: 203 cc Power: 6.5 HP at 3600 rpm Fuel: Gasoline Fuel Tank Capacity: 3.6 liters Performance & Capacity Maximum Payload: 500 kg Weight: 550 kg Skip Volume: 200 dm³ Tilting Angle: 100° Tilting System: Hydraulic Dimensions Machine Dimensions without Pedal & Skip: 1570 × 880 × 1450 mm Machine Dimensions with Foot Pedal & Skip: 2050 × 880 × 1450 mm Skip Dimensions: 1050 × 730 × 730 mm Track Width: 700 mm Lifting & Height Maximum Lifting Height: 1020 mm Maximum Tipping Height: 970 mm Tipping Distance: 220 mm Ground Clearance: 110 mm Psdpfxoyqxw Is Abyogl Undercarriage Track Width: 180 mm Track Contact Area: 1000 mm Track Gauge: 520 mm Turning Radius: 1150 mm Speed: 2.88 km/h Climbing Ability: 20° Rubber Tracks for Optimal Ground Grip ✅ Features & Benefits ✔ Removable protective container ✔ Simple control via operating lever ✔ Foldable standing platform for flexible work ✔ Very compact – ideal for tight construction sites ✔ High stability thanks to track undercarriage ✔ Low-maintenance gasoline engine ✔ Hydraulic tilting function ✔ Powerful lifting function for comfortable unloading Application Areas Construction & Renovation Gardening and Landscaping Agriculture Barn & Farm Work Material Transport on Difficult Terrain Work in Confined Spaces Condition & Delivery Available immediately New / unused, from current production Factory-tested, ready for immediate use Europe-wide delivery via freight forwarder possible 💶 SECURE PRICE ADVANTAGE Net list price: €3,800 Promotional price with 10% discount: €3,420 net plus VAT Save now – better price possible! Benefit from our attractive promotions. An inquiry is worthwhile! Location: Rheda-Wiedenbrück Inspection possible by appointment ➡️ Request now and secure a 10% promotional discount on track dumpers!

Condition: new, operating pressure: 200 bar, empty load weight: 205 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, KARCHER HDS 13/20-4 SX HOT WATER PRESSURE WASHER TECHNICAL DATA: Model: HDS 13/20-4 SX Manufacturer: KARCHER Country of manufacture: Germany Series: Professional Condition: NEW (EXHIBITED) Catalog number: 1.071-850 Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 600 - 1300 Working pressure (bar): 30 - 200 Maximum pressure (bar): 230 Water heating range (°C): 80-155 Connection power (kW): 9.3 Power cord (m): 5 Weight (kg): 205 Dimensions (L x W x H) (mm): 1330 x 750 x 1060 This device is new and unused, and has only been used for display purposes. KARCHER HDS 13/20-4 SX PRESSURE WASHER EQUIPMENT: Pressure gun: Karcher Professional - M22 thread Integrated high-pressure hose reel: Professional, original integrated reel with a capacity of 20 m High-pressure hose: Karcher Professional - Longlife series 20M, DN8, 400 BAR - M22 Spray lance: Karcher Professional 950 mm M22/M18 Nozzle: Karcher Professional M18 POWER pressure nozzle Pgodpfxey U Nfxe Abyol Pressure regulator: KARCHER Servopress M22 WHY CHOOSE THE HDS 13/20-4 SX PRESSURE WASHER? The HDS 13/20-4 SX is ideal for medium and large industrial facilities where cleanliness is paramount. This hot water pressure washer is also successfully used by transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The SX version of the pressure washer is equipped with a built-in reel with a 20-meter pressure hose, which significantly improves comfort and safety during operation. HDS 13/20-4 SX - THE SUCCESSOR TO THE HDS 10/20! In the HDS 13/20-4 SX, the main emphasis was placed on design refinement compared to the previous model, the HDS 10/20. The pump and boiler have been improved, making this the most refined version of the hot water model to date. Its balanced design allows for single-person operation and transport. A brass pump head and automatic pressure reduction system extend the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. Standard features include a high-pressure gun with integrated servopress pressure regulation, a rotating lance, a built-in 20m hose reel, and a power nozzle. KARCHER HDS 13/20-4 SX RELIABLE | DURABLE | ERGONOMIC The HDS line emphasizes ergonomics and work comfort. 4-pole, water-cooled motor Two separate detergent tanks ECO mode optimizes fuel consumption (by up to 20%) The set is equipped with an integrated high-pressure hose reel, which significantly improves work comfort. Additional handles allow for transporting the device with additional accessories. The brass pump head and automatic pressure reduction system extend the device's lifespan. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with integrated servopress pressure regulation, a rotating lance, a built-in 20m hose reel, and a power nozzle. COD: 10121

Condition: used, Year of construction: 2001, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 24400 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available Podpfx Aswirkgsbyegl WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Year of construction: 2019, operating hours: 3,061 h, condition: used, functionality: fully functional, EVT GIGANT Vapor Degreasing System – for large, heavy, and bulky components The system offered is ideally suited for the reliable removal of oils and oily residues from metal parts using the vapor degreasing process. Thanks to the generously sized work basket, high throughput rates are possible. Since this version does not include flooding of the work chamber, the required solvent volume remains comparatively low despite the large chamber size – an advantage for economy and operating costs. The freely programmable PLC control system enables precise adjustment to a wide range of cleaning and degreasing processes as well as individual production requirements. Maximum system availability is ensured by the online remote maintenance system, developed in cooperation with SIEMENS, and an efficient online service. The used system is in excellent technical condition and can be inspected and tested in our technical center in D-75447 Sternenfels after prior arrangement. Technical highlights: - Closed system without exhaust air Psdpjy Tnyrefx Abyjgl - Top loading - Spraying system & vapor degreasing - Hot air drying - Vacuum distillation - Activated carbon module (designed for 2-shift operation) - Control system: Siemens S7 Profinet - Online access for remote maintenance System equipment: - Solvents that can be used: Perchloroethylene (PER) - Basket dimensions L/W/H: 2100x400x600 mm - Throughput: max. 2-3 batches/h (max. 600 kg/h) - Filling volume: 400 dm³ - Energy requirement: 28 kWh - Connected load: 56 kW - Compressed air: 6 bar - Loading height: 1500 mm - System dimensions L/W/H: 4200 / 1750 / 2100 mm - System weight: 3500 kg

Condition: used, Year of construction: 2014, Working dimensions: X = 3425 mm, Y = 1287 mm, Z = 325 mm. Max. workpiece height: 180 mm. Max. clearance under the hood: Y = 1450 mm / Bumper version = 1370 mm. Includes CabinetControl Base, 1 machine license, and 1 office license. Milling head 7830, 1-stage, power 6.5 kW, air-cooled, n(max.) 1000 - 18000 min-1, infinitely adjustable. Max. power at 12000 min-1 to 18000 min-1 with HSK-F 63 tool holder, with collet chuck with HSK shank. Drilling unit 7884, 14 spindles, 10 vertical spindles individually accessible, arranged in an L-shape, 6 in the X direction and 4 in the Y direction. Drive power 3 kW, 32 mm pitch. Sawing unit: Integrated sawing unit for sawing/grooving in the X direction, n(max.) 1000 - 5650 min-1, infinitely adjustable. Tool holder: A = max. DM = 125 mm. Pgodpfxsy Tpz Rs Abyjl Location: Supplier.

Year of construction: 2009, condition: used, GEA Niro Soavi NS2002H Laboratory Homogenizer – 30 L/h – 60 MPa – 2009 The GEA Niro Soavi NS2002H is a compact, high‑pressure laboratory homogenizer designed for R&D, pilot trials and small‑scale production. This 2009 unit is in very good condition and offers a processing capacity of up to 30 L/h (30 dm³/h), depending on product and pressure. With a working pressure up to 60 MPa (600 bar), the NS2002H delivers efficient particle size reduction and stable emulsions, making it ideal for demanding formulations and scale‑up work. Key Features • Model: GEA Niro Soavi NS2002H • Year of manufacture: 2009 • Capacity: up to 30 L/h (product and pressure dependent) • Working pressure: up to 60 MPa (600 bar) • Laboratory / bench‑scale design – compact and easy to install in R&D labs • Stainless steel product contact parts for hygiene and corrosion resistance • Adjustable homogenizing pressure for precise process control and repeatability • Designed for continuous operation with stable, reliable performance Typical Applications • Dairy: milk, cream, flavoured dairy beverages Pgjdpsy Nmy Asfx Abyjl • Food & beverage: sauces, dressings, juices, nutritional drinks • Cosmetics & personal care: creams, lotions, gels, serums • Pharma & biotech: emulsions, suspensions, nutraceuticals, pilot batches Benefits • Fine and uniform particle size for improved product stability • Enhanced texture, mouthfeel and visual appearance • Low product hold‑up volume – ideal for trials and high‑value products • Easy operation and cleaning, suitable for frequent product changeovers Capacity: 30 L/H on 600 Bar Working Pressure: 600 bar Max No. Stages: 2 condition: Very Good condition Available: Immediately

Condition: refurbished (used), Year of construction: 1973, functionality: fully functional, rotational speed (min.): 4,800 rpm, Separator WESTFALIA type SB60-06-076 for beer, fruit juices, wine, vegetable juices, tea, coffee, for citrus and tropical fruits for pectin Pgsdpfx Abjtqf Dboyjl capacity: 300-13.000l per hour with 4,800 rpm Dimensions and weight: Height: 2500 mm Length: 2000 mm Width: 1800 mm Weight: 2350 kg Technical Data: Manufacturer: Westfalia Type: SB60-06-076 Year of construction: 1973 Serial number: 1668 021 Ø dl. 568 mm Drum speed: 4800 rpm Permissible density of the centrifuged material: Heavy liquid: 1.0 kg/ dm3 Solids: 1.45 kg/ dm Test books, tools, drawings available!

Condition: excellent (used), Aluminum silos standing on foot ring (plastic granulate silos) - used - designed for a bulk density of 1.0 kg/dm³. volume: 105.000 ltr. Manufacturer: Zeppelin Available quantity: 1 diameter: approx. 3.000 mm Cyl. height: approx. 17.500 mm Total height: approx. 15,000 mm (incl. 1,250 mm roof edge railing) Material: AlMg3 Bulk density: 1.0 kg/dm³ Inclination of the top soil: 15°. Inclination of the cone: 60 Equipment and connections: In the top floor: 1 x access dome DN 500 with hinged cover 1 x vent hole with hood 2 x flange DN 100 PN 10 (filling + level indicator) 1 x connection piece for full indicator 1 x roof edge railing with handrail 2 x crane eyes On the mantle: 1 x access door 850 x 2000 8 x pipe holders for filling pipe DN 100 1 x filling pipe DN 100 1 x cable pipe 1 x connection piece for full detector The silo ends at the bottom in a 60° cone with flange DN 200 (discharge height: approx. 500 mm) with suction box. Pedpfx Abslg Dcfsyogl The currently connected measuring and control technology is included. However, no warranty is assumed for their function! Additional price: The silo has a two-row access ladder with back protection and dwell platform (additional price: 950 € plus VAT). Otherwise according to pictures and drawing.

Condition: excellent (used), Year of construction: 2017, Krauss Maffei KM 350-3000 CX injection molding machine Pgsdpfey Tp Rlsx Abyol Year of manufacture: 2017 Fully hydraulic clamping system. MC6 control system based on industrial PC technology with real-time Ethernet, equipped with an integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running processes (ProcessDesigner). Plasticizing unit Complete plasticizing unit for thermoplastics, with abrasive protection, 80 mm screw diameter, equipped with a backflow valve and an open nozzle. TECHNICAL DATA OF THE MACHINE – STANDARD VERSION Clamping unit Clamping force: 3500 kN Opening force: 221 kN Dimensions of the mounting plates (h x v): 1060 x 1095 mm Distance between columns (h x v): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold height: 380 mm Maximum opening width: 1300 mm Ejector stroke: 250 mm Ejector force front/rear: 95/49 kN Injection unit Screw diameter: 80 mm L/D ratio: 20.0 Injection pressure: 1855 bar Injection volume: 1608 cm³ Injection weight: 1464 g Injection speed: 95 mm/s Injection rate: 478 cm³/s Standard screw speed: 220 rpm Plasticizing rate: 109.5 g/s Electrical and hydraulic equipment Rated power of the pump motor: 75 kW Installed power of the heaters: 36 kW Number of heating zones in the cylinder: 7 Dry cycle time / stroke according to Euromap 6: 2.3 s / 497 mm Oil tank capacity: 720 dm³ Dimensions and weight Net weight including control cabinet: 16.3 t Machine dimensions (l x w x h): 7.21 x 2.17 x 2.25 m

Condition: excellent (used), Year of construction: 2021, EMCOMAT 14 D Metric center lathe, including: Digital display and constant cutting speed, center distance 650 mm, center height 140 mm, spindle bore DIN 55029 - Size 4, spindle bore Dm. 40 mm, electrical equipment 400V/50Hz/~3/PE, drive power 5.4 kW, Continuously variable spindle speeds 60-4000 rpm, including chuck guard and spindle cover, machine stand, splash guard, standard accessories, operating manual and spare parts list, Electrical documentation. Digital display EMCO ACC. Machine complies with European safety standards (CE) Year of manufacture: 2021 C7D215001 includes: Röhm 3-jaw chuck ZS dmr. 140 mm Set of 3 toothed soft jaws Pjdey Tichopfx Abyegl External jaws, hardened, for Röhm chuck Dm. 140 Internal jaws, hardened, for Röhm chuck Dm. 140 FOLLOWING CENTER MK2 Quick-change drill chuck type 136 S, 1-13 Arbor MK2 / B12 MACHINE LIGHT LOADING DEVICE LONGITUDINAL TURNING STOP Leveling element Quick-change tool holder set A Operating manual EM14

Year of construction: 2015, condition: good (used), Deburring machine, used Make: NS Maquinas Industrial Model: DM 1600 DC Year of manufacture: 2015 Working width: 1600 mm Minimum part size: 50x50 mm Power: 8 kW Number of cross belt stations: 1 Cross belt speed 2-8 mm/s Feeding speed 0,6-3,2 mm Extraction: Donaldson Performs edge rounding and removes sharp edges on both the outer and inner contours of stainless steel, steel, or aluminum that have been cut in a laser, shearing, or punching machine. Pgodpfx Ajikm Tkobyel Dimension; 2730x1740x1940 mm Weight: 1790 kg.

Condition: new, Year of construction: 2025, functionality: fully functional, turning height: 1,200 mm, workpiece weight (max.): 8,000 kg, turning diameter over cross slide: 1,700 mm, turning diameter: 1,700 mm, feed length X-axis: 1,100 mm, feed length Z-axis: 760 mm, faceplate diameter: 1,500 mm, total height: 4,600 mm, total width: 4,500 mm, total length: 4,700 mm, rotary table diameter: 1,500 mm, type of input current: three-phase, rotational speed (max.): 200 rpm, rotational speed (min.): 2 rpm, table diameter: 1,500 mm, warranty duration: 24 months, overall weight: 21,000 kg, Equipment: documentation/manual, REM Vertical Turning Lathe SC 17 CC Name of the machine is DOUBLE COLUMNS VERTICAL BORING MACHINE type SC17CC, where: SC = Double Columns Vertical Lathe; 17 = Max. swing diameter (dm); CC = Conventional type (standard equipment) Special manufactured by REM for : - CENTER AND EAST EUROPE - MIDDLE EAST - LATIN AMERICA - DEVELOPING SHOPS , HIGHLIGHTS - Unbeatable pricing for the base machine wth the option to add more features. - very effective machine for machinning small series parts. - good for worshops in small and middle range of production. - no gearboxes - less maintenance costs. - no cnc controll - a DRO can be fitted for the rapid and feed rates. - no expensive tehnology and operator training. - easy maintenance operation. - easy learning curve. Technical Details: Faceplate Diameter (mm) 1500mm Max. Turning Diameter (mm) + 300 Machining Height: 1500 - 2000 - 3000 mm Max. Work Piece Weight: 8 tons Control Conventional DIGITAL READ OUT for each axis The bed - is a single column with table bed. Faceplate - made of high-strength cast iron with 4 dies for centring and fixing the workpiece for the machining. Piece clamping is done with mechanical device with manual clamping. The movable cross rail Psdpfx Absvu Dz Neyjgl - is one of the main parts of the lathe, with the role of guiding the vertical working heads and shifting the tool in horizontal direction. The cross rail is the quality cast iron mono block construction heavily ribbed provided with guide ways heat treated and grinding that overtake the efforts without deformations. Feed drive - Is performed on each axis through a feed box; the kinematics chain is made up of gears and electromagnetic clutches. The feed box gear wheels are made of alloy steel, heat-treated, with a ground tooting. Lubrication equipment - The lathe it is provided with continuous lubrication units as well as with intermittent lubrication (oil pulse lubrication) units operating in automatic regime. The continuous lubrication is used to ensure the lubrication of the gear box, the feed boxes and the main spindle.

Condition: used, Year of construction: 2016, machine/vehicle number: 7405_408, functionality: fully functional, operating hours: 788 h, HOLZ-HER Evolution 7405 White Edition CNC Machining Center For sale is a very well-maintained HOLZ-HER Evolution 7405 White Edition, year of manufacture 2016. The machine is in excellent technical and visual condition and can be demonstrated under power. A particular highlight is the exceptionally low processing time: only 788 hours with active feed. The machine was professionally serviced and completely recalibrated by the manufacturer in 2021. Since then, it has seen only limited use and runs smoothly, precisely, and reliably. Technical Data Manufacturer: HOLZ-HER Model: Evolution 7405 White Edition Year of manufacture: 2016 Serial number: 7405_408 Software / Controls CAMPUS Version: 6.4.4.2 NC-Hops Version: 6.6.2.207 Operating Hours Active feed / Processing hours: only 788 h Machine ON: 6,723 h Pgedpfoy Sicxex Abyel Features 4-MAT configuration Drilling unit with 15 spindles Saw and grooving unit Milling unit with 6-position tool changer Handheld control device Vertical and horizontal processing Vacuum clamping system Ideally suited for: Furniture production Interior fittings Kitchen construction Joineries CNC entry or capacity expansion Condition Very well-maintained overall condition Regularly serviced Professionally recalibrated by the manufacturer in 2021 Minimal use since recalibration Immediately ready for operation Runs very cleanly and precisely No known technical defects Machine can be inspected and tested during operation Availability Available from calendar week 25 / 2026 Inspection possible by appointment Support with loading and transport organization available Price Asking price: €43,900 net

Condition: ready for operation (used), Kessler DM 100 / 2 KX three-phase asynchronous motor SN:145479, used, normal signs of use, 100% functional, scope of delivery as per photos Pedpfxji D Iyto Abyjgl