Used Ras 76.61 for sale (1,072)

Condition: refurbished (used), Year of construction: 2004, Technical Data: Product Number RA 0100 E Year of Manufacture 2004 Motor Power 3 kW Capacity 100 m3/h Max. Vacuum 0.4 mbar Noise Level 74 dB Rotational Speed 1500 rpm Weight 100 kg Ppodsy Azxgepfx Ag Dsr Dimensions [H x L x W] 611 x 381 x 310 mm The pump achieves a vacuum of 0.4 mbar, as confirmed by the sensor measurement shown in the video below. 4.1 -1 on the sensor display means a vacuum of 4.1 times ten to the power of minus one, which equals 0.41 mbar. After major overhaul Pump in excellent condition New oil New oil filter New exhaust separators

Condition: used, Year of construction: 1998, Year:1998 Condition: good Configuration: Ppedpsww Ex Hjfx Ag Der - jogger Polar RA-4 - size: B1 - left + right - pressing adjustable - air table Specification: - max. size: 70 cm x 100

Condition: repair required (used), Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Manufacturer: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Maximum Sheet Width: 1500 mm Maximum Sheet Thickness: 1.5 mm Podsvkbrqopfx Ag Dspr Total Weight: 9350 kg Features: Decoiler Measuring Unit Sheet Straightener Guillotine Shear Electrical Data: Voltage: 400 V Power: 12 kW Frequency: 50 Hz Current: 35 A Note: The control panel display is not functioning.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, overall weight: 1,200 kg, volume flow: 1,000 m³/h, final pressure: 4 bar, Technical data: Product number RA 1000 B Year of manufacture 2004 Motor power 22 kW Capacity 1000 m3/h Max. vacuum 4 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 1200 kg Dimensions [H x L x W] 1611 x 981 x 1310 mm Ppedpfoyc Ht Isx Ag Djr The pump achieves a vacuum of 4 mbar as confirmed by the sensor measurement in the video attached below. After service New oil New oil filter New exhaust separators Oil rotary vane vacuum pump, suction device – a device used in technology for the removal of gases (creation of vacuum) in a closed space. Pumps are classified according to their operating principle into: positive displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: Ultimate pressure (the lowest pressure that can be achieved with this pump), Pumping speed and dependence of this speed on pressure, Capacity (usually measured in m3 of pumped gas per unit time).

Year of construction: 2001, condition: ready for operation (used), - USED - CNC EXTERNAL GRINDING MACHINE CENTRE HEIGHT: 180 mm DISTANCE BETWEEN CENTRES: 1600 mm MAX GRINDING LENGTH: 1100 mm MAX ADMITTED LOAD: 150 Kg GRINDING DIAMETER: 300 mm X-AXIS TRAVEL: 350 mm Z-AXIS TRAVEL: 1250 mm Psdpfsyry Rxsx Ag Djpr GRINDING WHEEL SIZE: 610 x 120 x 203,2 mm MOTOR POWER: 11 kW CONTROL UNIT: FANUC 18i0 TA WEIGHT: 8400 Kg OVERALL DIMENSIONS: 3380 x 2200 x 1800 mm ACCESSORIES: PAPER FILTER ; PORTABLE HANDWHEEL NOTE: GRINDING WHEEL AUTOMATIC DYNAMIC BALANCER; ARTICULATED SUPPORT FOR GRINDING WHEEL CHANGE; GRINDING WHEEL FORMING SYSTEM; CUTTING IN AIR DEVICE; MARPOSS UNIMAR DIAMETRAL AND AXIAL HEAD

Condition: used, Suspension crane runway Crane system DEMAG type KBK 1 Year of construction approx. 2000 Monorail overhead crane system with monorail crane bridge Light crane system made of KBK modular system sections load capacity: 125 kg Span width: 5 meters Distance between longitudinal rails: 4.1 meters Longitudinal girder length complete: 12 metres Beam profile crossbeam = KBK1 Beam profile longitudinal rails = KBK1 Consisting of: 29 meters KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 piece of trolleys for the crane suspension 2 pieces double carriage for the longitudinal rails 10 pieces screw claws for the crane suspension or ceiling attachment (without beam clamps) 6 pcs. end covers suitable for KBK1 runners Ppjdjhrkrtjpfx Ag Dor

Condition: excellent (used), Year of construction: 1997, Indexing table 400 mm hand Set tooling included Table bore 10 - 130 mm Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min; Table Ø: 690 x 460mm Table load: 2000 Ram adjustment:0 - 425mm Length: 1300mm Width: 1100mm Height: 1400mm Weight: 1800kg Ppedpfexclfzox Ag Dor

Year of construction: 1970, condition: ready for operation (used), Three old metalworking an tooling machines are available. 1) Milling machine Klopp FWU 13/6, year of manufacture: 1970, table length: 1905mm, machine dimensions with extended table: 2805mm/2000mm/1660mm, weight: approx. 2200kg. Without vice, with defective display. 2) Precision flat grinding machine Georg Müller MPS2, year of manufacture: 1971. 3) Plate shear Reinhardt RAS 52.80, year of manufacture: 1971, working width: 1540mm, power: 5.5PS, max. sheet thickness: 2mm, table height: 750mm, machine dimensions X/Y: approx. 2150mm/2020mm, weight: approx. 860kg. The mechanical lifting unit of the machine is defective. Documentation available. On-site inspection is possible. Individual sale possible. Ppsdpfx Agju Eumhj Der

Condition: excellent (used), mileage: 294,000 km, power: 375 kW (509.86 HP), first registration: 02/2017, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fridge, navigation system, parking heater, power mirror, = Additional Options and Equipment = - Aluminum fuel tank - Power brake booster - Low noise - Speed limiter - Air suspension - Radio/CD player - Reversing camera - Sun visor flap - Auxiliary heater - Xenon lighting - Power take-off (PTO) - Central lubrication system = Further Information = Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Suspension: Air suspension Rear axle 2: Suspension: Air suspension Weights Curb weight: 24,000 kg Payload: 8,000 kg gross vehicle weight (GVW): 32,000 kg Functional Crane: FASSI 990 RA.2.28 XHE- Dynamic + JIB, year of manufacture 2016, mounted behind the cab Body make: FASSI 990 RA.2.28 XHE- Dynamic + JIB CE marking: yes Condition Technical condition: very good Optical condition: very good Financial Information Podpfx Agjwcfipj Dspr Price: On request

Condition: used, Year of construction: 1993, Technical details: saw blade diameter: 250 mm saw blade drill hole: 30 mm Cutting depth: 68 mm Cutting length: 450 mm total power requirement: 2,55 kW weight of the machine approx.: 150 kg dimensions L x W x H: 0,85 x 0,86 x 1,4 m This circular saw is hand operated, equipped with a table support 400 x 860 x 22mm, relocatable, which is placed on a frame. Uses: Wood, thermosetting plastics, plaster, chipboard and other similar materials. Details of the swivel arm: Length 800mm, max. projection 580mm, swiveling 45° right/left their indication via radial scale. Sawhorse data: Feed manually (handle), tiltable 90° left their indication via radial scale, motor 380V with 2,700 rpm, protection class IP44, Ppodou Nifyopfx Ag Der *

Condition: new, Various inking and dampening rollers for KBA Rapida 142: - no. 374.0101.1 Westland Ink form roller / Farbauftragwalze, Ø 117mm, new (4 pieces) - no. 374.0102.1 Westland Ink form roller / Farbauftragwalze, Ø 123mm, new (2 pieces) Ppodpfx Agjv Ebf Hj Dor - no. 374.0201.1 Westland Ink form roller / Farbauftragwalze, Ø 129mm, new (3 pieces) - no. 374.0202.1 Westland Ink form roller / Farbauftragwalze, Ø 135mm, new (1 piece) - no. 374.0301.2 Westland Ink vibrator roller / Farbheberwalze, Ø 117mm, new (3 pieces) - no. 374.0401.1 Westland Ink distributor roller / Farbreiberwalze, Ø 117mm, new (3 pieces) - no. 374.0402.1 Westland Ink distributor roller / Farbreiberwalze, Ø 123mm, new (4 pieces) - no. 374.0501.1 Westland Ink distributor roller / Farbreiberwalze, Ø 129mm, new (3 pieces) - no. 374.1005.1 Westland Waterform roller / Feuchtauftragwalze, Ø 135mm, new (5 pieces) - no. 374.1199.1 Westland Metering roller / Feuchtdosierwalze, Ø 130mm, new (3 pieces) - no. 90001067 Ebonit Ink distributor roller / Reiberwalze, Ø 80mm, used (2 pieces) - no. 90008616 Ebonit Ink distributor roller / Reiberwalze, Ø 102.3mm, used (1 piece) - Rilsan Oscillating roller / Beschwerwalze, Ø 60mm, used (1 piece)

Year of construction: 2003, condition: excellent (used), KUAG PIPE-HAUL-OFF 400/4 CATERPILLAR Year of construction: 2003 Caterpillars: 4 with synchronous drive Diameter: Min 40mm Max 400mm Take-off speed: 0.2 - 10 m/min Condition: Very good operational Psdpfx Ajwqym Eeg Djpr Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: like new (used), functionality: fully functional, Z1015201800 Z1010880270 etc. Ppsdpfsxy I D Uex Ag Der

Condition: ready for operation (used), 6355 Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH, Used machine Manufacturer : Meritus Type : RAS 150 VSH Overall dimensions : 1000 x 1620 x 2100 mm Weight : 840 kg Electrical data : 415 V ; 150 kVA ; 50 Hz Ppodju Nvh Ujpfx Ag Der - equipped with a photocell - tool water cooled

Condition: used, Year of construction: 1992, pressure 80 t stroke 40 mm Ppjdpfowz Rv Eox Ag Djr no. of strokes 60-300 Hub/min table surface area 730x750 mm weight of the machine ca. 14 t

Condition: good (used), Brush deburring machine, sheet metal deburring machine, deburring machine -Deburring machine for: stamped, laser and nibbling parts Pjdpfxjd Nq A Ue Ag Djpr -Deburring system for: sheet metal edges with notches -Drive power: 0.71 kW -Speed: 4500 rpm -Dimensions: 400/180/H130 mm -Weight: 3.5 kg

Condition: good (used), functionality: fully functional, mileage: 148,000 km, power: 103 kW (140.04 HP), first registration: 01/2024, fuel type: diesel, next inspection (TÜV): 05/2028, color: white, number of seats: 3, Equipment: ABS, Bluetooth, air conditioning, airbag, cruise control, full service history, power assisted steering, sliding door, soot filter, truck registration, Clean Opel Movano with service booklet – 1st hand Replacement engine – original Opel engine installed 30,000 km ago! Ppjdoy H Da Ijpfx Ag Dor Air conditioning, Bluetooth, cruise control, conversion, 3 seats, touchscreen monitor, mirror monitor We are also happy to offer you financing!

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Ppsdpfx Agsy H Idde Dsr Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: excellent (used), High-end hydraulic tool from the renowned manufacturer CEMBRE. This device delivers high clamping force and convenient operation thanks to battery power. Robust construction and reliability – equipment used in professional applications. 📊 Technical specifications: Manufacturer: CEMBRE Model: B35-50D Clamping force: 35 kN (approx. 4 tons) Max. cross-section: up to 150 mm² (Cu) Power supply: battery-powered Year of manufacture: 2010 📦 Included: CEMBRE hydraulic press Battery Charger Transport case Documentation Additional items as shown in the photos 📦 Condition: Very good technical condition Fully functional Normal signs of use Ready for work Podpfxsy H Rdgo Ag Dspr

Condition: used, maximum load weight: 27,920 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 04/2027, Fifth wheel height: 1,150 mm. Hydraulic system: 110 l/min, 225 bar, connections on front wall: 1'' male screw pressure line, 1'' female screw return line. BPW On Road Eco Air axles, 1st axle liftable, EBS 2S/2M KNORR, JOST steel landing legs, fully enclosed side underrun protection painted RAL 9005 black. Two LED work lights behind the third axle and in front of the support legs, one LED work light inside. Steel wheels with black wheel hubs, 6 kg fire extinguisher, 3-metre ladder, radio remote control for floor functions, bracket for shovel and broom, two toolboxes mounted on the overhang, 15-metre air hose with hydraulic reel and pistol, self-supporting chassis 4,400 mm, aluminium body 3/2 mm. Catwalk at front wall with two ladders, door in front wall left with ladder, 10 mm floor type, aluminium movable side wall with tarpaulin (3,800 g) and rail sweeper, rear doors each with two integrated 18 mm locking rods, reinforced door sealing, rear upper cross member unlockable on right side by pin, pneumatic door unlocking, roof roll tarpaulin, black (650 g), with side reinforcement (200 g over 600 mm), twelve pairs of lashing rings, wear plates on rear side walls (3 x 1.5 m), black integrated lashing straps in side wall with stainless steel ratchets, left side protection tarpaulin RAL7038. Pedpfjyw Dxxex Ag Dopr

Condition: used, maximum load weight: 27,800 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2022, next inspection (TÜV): 04/2027, Availability upon request. Short-term rental. Current images available on request! Fifth wheel height: 1,150 mm Hydraulics: 110 l/min, 225 bar Hydraulic hoses: 4.4 m Hydraulic connections: 1'' male pressure, 1'' male return Axles: BPW On Road Eco Air, first axle lift, EBS 2S/2M KNRORR JOST steel landing legs Hydraulic connections at the front wall and between landing legs Spare wheel holder Toolbox rear right 2 wheel chocks 6 kg fire extinguisher 3-meter ladder Remote control for floor operation 4 LED work lights (2x behind the landing legs, 2x behind the third axle) Left side protection tarpaulin (Rollfix system) Continuous chassis frame Podpfxoynp Tno Ag Dspr Aluminum construction 3/2 mm Walkway on front wall with 2 ladders Floor type: 10 aluminum boards Aluminum mobile wall with 3,800 g tarpaulin and track cleaner Rear doors each with two integrated locking bars, pneumatic door release Roof roll tarpaulin 650 g with 600 mm side reinforcement, white 12 pairs of lashing rings Reinforcement plate rear side walls Superstructure color: RAL 7047 Telegrey 4, Roof tarpaulin: RAL 5003 Sapphire Blue, Side tarpaulin: RAL 7038 Agate Grey

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, 3x VE20 Microbond SCI 3x New The parts have been in operation for approximately 200-300 hours. Pedor Rdd Nopfx Ag Depr The MICROBOND CSI system, consisting of a feed unit, control system, and high-performance generator, guarantees consistent welding quality. Robust yet highly precise mechanics enable constant gap control thanks to the patented MicrogapControl gap control system. The MICROBOND control system controls and visualizes this continuous joining process. Constant amplitude output and high continuous sound power enable process speeds of up to 800 m/min.

Condition: not inspected (used), Year of construction: 1977, functionality: unexamined, machine/vehicle number: 100377, table length: 860 mm, table width: 600 mm, overall weight: 5,000 kg, stroke rate (max.): 300 1/min, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates prompt collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Strokes: 60 – 300/min Table dimensions: 830 mm x 600 mm Decoiler Model: KEMMERICH V 500 AE Diameter: 1,500 mm MACHINE DETAILS Pjdjy D R Rzepfx Ag Dspr Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,500 x 2,400 mm Machine weight: 5,000 kg EQUIPMENT Press force measuring device (Model: GERLACH PKV 100) External reference: 66

Condition: new, Year of construction: 2023, IN STOCK -- Fully automatic aluminium circular saw with 90° cutting capability and drilling unit TR 12 (up to ø10 mm) or TR 20 (up to ø20 mm), featuring simple and safe operation with excellent cutting performance. This machine is capable of only making 90° cuts, allowing workpieces to be drilled and cut in a single workflow. Technical Specifications: ● Cutting range: 90°: round 100 mm / square 100 x 100 mm / rectangle 170 x 60 mm ● Drive power: 1,9 kW / 400 V / 50 Hz ● Speed: 3000 RPM ● Feed: Single feed 300 mm (double stroke up to 600 mm) Ppedomftiwspfx Ag Djr ● Max. Cutting Height: 100 mm ● Blade Dimension: 350 x 32 mm Standard Equipment: ● Machine with 90° cutting capability, powered by a high-performance motor ● Clear and large-sized control panel ● Length adjustment from 5 to 300 mm via handwheel and counter ● Main clamping unit with 3 pneumatic clamping cylinders (1 horizontal, 2 vertical) ● Feed clamping unit with horizontal and vertical pneumatic clamping cylinder ● Large protective cover, covering the entire working area, pneumatically raised ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Connections for dust extraction system ● Minimal lubrication system ● TR 12 or TR 20, fixed automatic drilling unit with one tool holder; spindle speed adjustment, drilling depth, etc. are manually adjusted; drilling cycle occurs automatically --> Also availabe with CNC control or in various sizes!

Condition: good (used), functionality: unexamined, machine/vehicle number: VBP00065013000009, Year of construction: 2021, The PÖTTINGER TERRASEM V 6000 DZ is a modern universal seed drill designed for precise sowing of cereals and cover crops, with the option for simultaneous fertilizer application. It is part of the TERRASEM series from the manufacturer Pöttinger. Basic Information: Type: Combined seed drill (seedbed preparation + sowing combination) Production: approx. 2021 – present Application: Conventional, minimum tillage, and no-till systems Option: Sowing + fertilizing ("DZ" version = dual hopper / dual system) Technical Specifications: Working width: 6 m Transport width: 3 m Number of rows: 48 Row spacing: 12.5 cm Press wheel diameter: approx. 380 mm Hopper capacity: up to ~5600 L (split, e.g. 40:60) Required tractor power: approx. 180 – 250 HP Ppsdpfx Agoy Em H Ue Der