Used Refrigerated Counter 0 °C To 10 °C for sale (113,642)

Condition: used, fuel type: diesel, lifting power: 21,000 kg/m, Year of construction: 2010, Dieci Hercules 210.10 Year of construction 2010 Hours 3385 Capacity 21000kg Lifting height 10 m Motor is equipped without Ad-blue Bdedpsx Av Rhofx Ahmsh Price on request

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 5,000 h, load capacity: 4,500 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,450 mm, power: 80 kW (108.77 HP), empty load weight: 13,000 kg, total length: 7,000 mm, drive type: Diesel, construction width: 2,300 mm, Telescopic forklift, rigid frame Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: good Bdodpez Dzdysfx Ahmeh Front tire type: Air Front tire condition: 20 - 40% Rear tire type: Air Rear tire condition: 20 - 40% Description: LIEBHERR TL445-10 telescopic handler - - 4.5-ton lifting capacity - - 10m lifting height - - Year of manufacture 2007 - - 5000 operating hours according to display - - 2-speed hydrostatic drive - - hydraulic quick coupler - - 4-cylinder John Deere diesel engine, 108 hp - - 4-wheel steering - - 4-wheel drive - - 3 steering modes - - 13,000 kg operating weight - - Overall height 2.45m - - Width 1.30m - - Length 7m - - Tires approximately 40% remaining - - Includes used pallet fork - - Very maneuverable handler - - Telescopic forklift in good condition - - Used bucket, 3 m³, available for an additional charge of 1500 euros!! - - Inspection and test drive are welcome - - Includes CE Declaration of Conformity + operating manual - - Delivery possible. Quick coupler, 3rd valve, 4th valve, heater, full cab, CE certificate

Condition: ready for operation (used), Indramat MAC 090C-0-GD-4-C/110-A-1/WI578LV/S001 three-phase AC servomotor, serial number: 68558, used, in good condition, 100% functional, scope of supply as shown in the photos. Bdodpfx Ahey T Uncsmsh

Condition: new, sheet thickness: 3.3bending length: 1050upper roll diameter: 90 Technical specifications: Bdedpfxsd Ab T De Ahmeh - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor EURO 825,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Body cover EURO 274,-- - Hardened rolls EURO 480,-- We have many references!

Condition: used, axle configuration: 2 axles, first registration: 10/2011, suspension: air, tire size: 425/65/r22,5, wheelbase: 1,300 mm, color: yellow, Year of construction: 2011, Applicable material: Concrete Suspension: air suspension Bdodpfx Asxzdf Rohmeh Rear axle 1: Tyre size: 425/65/r22,5 Rear axle 2: Tyre size: 425/65//r22,5 Drive: Wheel Make of bodywork: STETTER

Condition: new, Indramat MAC112B-0-GD-2-C/130-A-1/S005 Permanent Magnet Motor, serial number: MAC112-10094, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Bdsdpfx Ahozy Tpvomeh

Condition: ready for operation (used), Indramat 093B-0-GS-2-C/110-A-2 Servo motor SN: 26939,used, good condition, 100% functional, scope of delivery as per photos Bedpfx Asq N Ud Sehmodh

Condition: used, empty load weight: 6,610 kg, maximum load weight: 25,390 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 04/2012, next inspection (TÜV): 03/2024, suspension: air, wheelbase: 1,800 mm, color: red, mileage: 1,000 km, gearing type: other, driver cabin: other, * German trailer * 1st hand * available in multiple quantities * 10 m³ concrete mixer * Karrena mixer-mixer-malaxeur type 10/5/F/ZA-1800 * 300 liter water tank * Dump extension * Access with platform * BPW axles * Disc brakes * Air suspension with lifting/lowering * ABS/EBS * GVW: 32,000 kg. * Payload: 25,390 kg. Bedpjr Il A Defx Ahmjdh * Various Mercedes all-wheel tractor units from 2019/2020 available for an additional charge If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: ready for operation (used), Indramat MAC090B-0-PD-4-C/110-A-2/WI524LV/S013 permanent magnet motor, serial number: MAC090-96305, used, in good condition, 100% functional, scope of supply as shown in the photos. Bedpfey T Unvex Ahmsdh

Condition: used, empty load weight: 6,610 kg, maximum load weight: 25,390 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 04/2014, next inspection (TÜV): 09/2024, suspension: air, wheelbase: 1,800 mm, color: red, mileage: 1,000 km, gearing type: other, driver cabin: other, * German trailer * 1st hand * available in multiple quantities * 10 m³ concrete mixer * Karrena mixer-mixer-malaxeur type 10/5/F/ZA-1800 * 300 liter water tank * Dump extension * Access with platform Bdedpfx Ahjr Ilz Uomeh * BPW axles * Disc brakes * Air suspension with lifting/lowering * ABS/EBS * GVW: 32,000 kg. * Payload: 25,390 kg. * Various Mercedes all-wheel tractor units from 2019/2020 available for an additional charge If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: ready for operation (used), Indramat MAC090C-0-GD-1-B / 110-A Permanent Magnet Motor, serial number: MAC090-49089, professionally and completely overhauled and tested, with a 12-month warranty. Fully functional. Scope of delivery as shown in the photos. Bdjdpjlmtazofx Ahmsh

Condition: ready for operation (used), Indramat Rexroth MAC090B-0-JD-1-B/110-A servo motor, serial number: MAC090-13832, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Bdodelmta Nspfx Ahmsh

Condition: ready for operation (used), Indramat MAC63C-0-MS-1-C / 95-A-0 / J1000 Permanent magnet synchronous motor, serial number: 17285. The housing has a crack near the connector, but this does not affect its functionality. Used, shows normal signs of wear, 100% functional. Scope of supply as shown in the photos. Bodpsi D Irtsfx Ahmodh

Condition: ready for operation (used), Indramat MAC090A-0-ZD-1-B/110-A-0/-I01250 permanent magnet motor, serial number MAC090-11754, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Bdodjlntwiopfx Ahmjh

Condition: used, axle configuration: 2 axles, total width: 25,500 mm, total height: 40,000 mm, Year of construction: 2014, Equipment: ABS, Schwing/Stetter AM 10 FHAC 890 Concrete Mixing Trailer Load capacity: 10 m³, BPW axles, Wabco ABS, disc brakes, spring brakes, 1st axle liftable, reversing camera, air suspension, aluminum rims, auxiliary headlights: rear of vehicle, permissible total weight: 33,000 kg, unladen weight: 6,520 kg, payload: 26,480 kg, tire tread: 1st axle 15 mm, 2nd axle 13-15 mm. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel. …) will be happy to assist you. Bdjdpoyfr E Iofx Ahmoh You can find more information on our website. ... Errors, changes and prior sale reserved!!! = Further information = GVWR: 33,000 kg Last inspection: 2024-05 Please contact Tobias Ebert for further information.

Condition: used, 10 m³ – 5 m x 2 m x 1 m – = Further information = Intended use: Construction Please contact Miguel Cubas for more information. = Company information = Bdodpfx Aszl Slgshmsh We are located between Antwerp and Brussels along the A12 motorway, close to the Port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: ready for operation (used), Indramat MAC093A-0-LS-2-C/110-A-1// Permanent three-phase servo motor SN:7846, used, normal signs of use, 100% functional, scope of delivery as per photos Bdjdpfx Aovy N S Dohmeh

Condition: good (used), Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor -Pressure force: 10 ton Bedpfxovgu Hao Ahmodh -Pressure: max 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg

Condition: ready for operation (used), Winkelmann GNFI 90.11M / 10 DC motor SN:159295, used, normal signs of use, 100% fully functional, delivery as shown in photos. ATTENTION: Please enquire separately for packing and shipping costs! Bdjdpfx Ajx Dwizshmsh

Condition: ready for operation (used), Fanuc A06B-0601-B032 DC servo motor model 10 SN: 023624, used, in good condition, 100% functional, scope of delivery as shown in photos. Bdodpfx Aey Npcyjhmsh

Condition: used, Sensor, write head, read head, tactile bore measurement -from: warehouse liquidation -Product group: LF (70/455 kHz) Bdsdpfx Ahed E Uqgomoh -Dimension: 40 x 33 x 61.5 mm -Connection: M12x1 socket, 5.00 m, PU -Protection class: IP 67 -Weight: 450 g

Condition: ready for operation (used), Rexroth MAC112C-0-KD-4-C/130-A-2/WI522LV/S018 Servomotor MNR: R911229488,used, good condition, 100% functional, scope of delivery as per photos Bodpfxjuc Ii Ij Ahmsdh

Condition: ready for operation (used), Indramat MAC090B-0-JD-2-C/110-A-0 MNR: R911222786 Motor SN: MAC090-33360, used, in good condition, 100% fully functional, delivery scope as shown in the photos. Bjdpfxex Dubzs Ahmodh

Condition: new, pressure: 100bending length: 2600column width: 2150daylight: 530stroke lenght (max.): 300column throat depth: 450messurements (LxWxH): 3320x2260x2780weight approx.: 79004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 11 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Bedsd En Ryspfx Ahmedh Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                     ¤ 4,529.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)      ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)     ¤ 10.165,00 DELEM 69 T 3D 17'' touch screen control (Windows Base)     ¤ 16.350,-- KK Industries GmbH There's something for everyone!

Condition: ready for operation (used), Indramat MAC090C-0-KD-3-C/110-B-1/S001 permanent magnet motor, serial number as shown in the photo, mounting hole spacing: 116 x 116 mm, drive shaft diameter: 24 mm, used, significant signs of wear, 100% functional, scope of delivery as shown in the photos. Bjdpoi D Imnofx Ahmodh