Used Rhtc Section Bender for sale (3,087)

Condition: excellent (used), machine/vehicle number: 9003-0399, first registration: 12/2024, color: grey, emission class: euro6, Year of construction: 2024, operating hours: 149 h, Mast: Telescopic (13 sections) Superstructure brand: FASSI F .2.27 XHE+JIBL 615+ LIER CE marking: yes Technical condition: very good Optical condition: very good OFFER FASSI F990RA.2.27 XHE-DYNAMIC WITH L615 JIB AND BREVINI BWF3000 HYDRAULIC WINCH Crane year of manufacture: 31.12.2024 JIB year of manufacture: 2025 Operating hours: Only 149 hours --- General description We are pleased to offer you this virtually new Fassi F990RA.2.27 XHE-Dynamic loading crane. The crane is fully equipped with the powerful hydraulic L615 fly jib and a Brevini BWF3000 hydraulic winch. With only 149 operating hours, this crane system is in excellent technical and optical condition. The combination of the powerful main crane, the L615 JIB and the professional winch makes this system the ideal solution for the most demanding lifting operations in the construction industry, machinery and plant engineering, wind power, steel construction and in special transport. Equipment * Fassi F990RA.2.27 XHE-Dynamic * Hydraulic fly jib type L615 * Brevini BWF3000 hydraulic winch * Crane year of manufacture 2024 * JIB year of manufacture 2025 * Only 149 operating hours * Radio remote control * Hydraulically extendable outriggers * Hydraulically pivoting outrigger legs * Endless swivel system 360° * XP high-performance system * ProLink double lever system * Dynamic version * IMC (Integral Machine Control) * FX900 safety control * FX901 touchscreen display * D900 digital hydraulic valve block * ADC Automatic Dynamic Control * Flow Sharing hydraulic system * Overload protection * Automatic stability monitoring * Complete hydraulic system * Complete winch equipment * Ready for immediate use Technical data | Feature | Value | | ----- | -----: | | Lifting moment | 80.84 tm (793 kNm) | | Maximum hydraulic reach | 18.05 m | | Maximum reach with L615 JIB | 28.15 m | | Maximum working height | approx. 31 m | | Swivel range | 360° endless | | Operating pressure | 33.5 MPa | | Required oil volume | 80–100 l/min | | Hydraulic oil tank | 250 liters | The Dynamic version comes standard with the XP system, ProLink double lever, IMC control, Flow Sharing and the most modern electronic safety and control systems. Installation dimensions Rsdpfxjzxgl Uj Alaecf | Dimension | Dimension | | ----- | -----: | | Installation length | 2,540 mm | | Installation width | 2,055 mm | | Transport height | 2,840 mm | Weight F990RA.2.27 XHE-Dynamic with L615 JIB Weight: approx. 9,790 kg Max working height 32 meters Brevini BWF3000 hydraulic winch The installed Brevini BWF3000 is a professional, high-performance hydraulic winch for the most demanding lifting operations. Advantages: * High tensile force * High rope speed * Robust industrial design * Ideal for precision lifting operations * Perfect in combination with...

Condition: good (used), mileage: 928,978 km, power: 480 kW (652.62 HP), first registration: 01/2007, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: blue, gearing type: mechanical, Year of construction: 2007, operating hours: 9,410 h, Equipment: ABS, electric window regulation, fog lights, power mirror, trailer coupling, - Brake booster - Low noise - Air-suspended seats - Air horn - Rotating beacon - Sun visor - Toolbox - Power take-off (PTO) Axle configuration Front axle 1: Steerable Front axle 2: Steerable Weights GVWR: 27,000 kg Functional Mast: Telescopic (12 sections) Mast length: 30 m Lifting capacity: 25,000 kg Crane manufacturer: PALFINGER PK 85002 E + PJ 170 + LIER CE marking: yes Condition Technical condition: good Optical condition: good DAF XF 480 8x4 semi-trailer tractor / flatbed truck Palfinger PK 85002 E + PJ 170 E JIB – 12-section hydraulic – approx. 34 m working height We offer you a very well-equipped DAF XF 480 8x4, designed as a multi-functional semi-trailer tractor / flatbed truck, with a heavy Palfinger PK 85002 E loading crane including Palfinger PJ 170 E JIB, mounted directly behind the cab. Due to the combination of a heavy loading crane, JIB, winch, sliding fifth wheel, trailer coupling, and ballast platform, this vehicle is ideally suited for heavy-duty crane operations, transport of machinery and construction equipment, assembly work, and special transports. VEHICLE DATA Make / Model: DAF XF 480 Drive: 8x4 Design: Semi-trailer tractor / flatbed truck First registration: 01/17/2007 Mileage: 928,978 km CAB & EQUIPMENT * DAF XF SpaceCab * Air conditioning * Auxiliary heater * Manual transmission * Spacious SpaceCab * Sliding fifth wheel * Trailer coupling * Multi-functional design as semi-trailer tractor / flatbed truck * Ballast platform * Extensive stainless steel / V2A equipment * Various stainless steel tool and storage boxes PALFINGER LOADING CRANE Manufacturer / Model: Palfinger PK 85002 E JIB: Palfinger PJ 170 E Mounting: Behind the cab Rodpjzxgluofx Alajcf Crane operating hours: 9,410 hours The crane is very extensively equipped with: * Palfinger PJ 170 E hydraulic JIB * Main boom + JIB with a total of 12 sections * Radio remote control * Hydraulic winch * Additional oil cooler for the crane hydraulics * Additional hydraulic function on the JIB * Complete hydraulic system CRANE PERFORMANCE Maximum lifting capacity: approx. 25,000 kg Maximum working height: approx. 34 meters Maximum boom / mast length: approx. 30 meters Through the combination of the heavy Palfinger PK 85002 E main crane with the Palfinger PJ 170 E JIB, this vehicle has a very large working area. The crane configuration with a total of 12 sections makes this vehicle particularly interesting for work where a large reach and working height are required. MULTI-FUNCTIONAL DESIGN A particular advantage of this DAF is its versatile configuration. The vehicle can be used as a semi-trailer tractor and has a sliding fifth wheel for this purpose. In addition, the vehicle is offered with a ballast platform, making it ideal for heavy crane work and special transports. A trailer coupling is also available and...

Condition: good (used), Brand Ercolina Model CE40H3 Year of manufacture 2006 Hydraulic drive Roller diameter Ø 165 mm Rodpfx Alow Hx Tveaecf Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Power 1.85 kW Bending speed 10 rpm.

Condition: good (used), functionality: fully functional, *Description* Hydraulic shear and punch press *GEKA model HYD 50-S* No. 3497. Versatile 5-station machine, ideal for cutting and punching steel profiles. Robust machine, visible and in working order. *Technical Specifications* - *Brand / Model*: GEKA HYDROCROP HYD 50-S - *Machine No.*: 3497 - *Punching force*: 50 tons - *Bending force*: 50 tons *Capacities with standard blades* - *Angle iron*: 120 x 120 x 10 mm at 90° - *Flat bar*: 300 x 15 mm - *Round bar*: Ø 40 mm - *Square bar*: 40 x 40 mm Rcedpfxozt Swlj Alasf - *Punching*: Ø28 x 13 mm thickness *Special Equipment* - *Bending*: 200 x 15 mm - *Notching*: 250 x 250 x 6 mm - *Shear for UPN/UPE*: 100 mm - *Shear for IPN/IPE*: 100 mm *Condition* Complete machine with stations: punching, flat/angle/round/square shearing, bending, notching. Sold with punches. Heavy weight, mounted on a steel base.

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment Rcsdezd Uv Eepfx Alaef

Year of construction: 2018, condition: used, This listing is for a Grant Controlled Rate Freezer - CRF-1 The unit is in full working condition and is ready for immediate release Product Overview: The CRF-1 Liquid Nitrogen-Free Controlled Rate Freezer is designed for precision-controlled freezing and cryopreservation of biological samples, such as embryos, stem cells, mammalian cells, spermatozoa, antibodies, tissue sections, and rodent organs. Unlike conventional liquid nitrogen-based freezers, the CRF-1 is liquid nitrogen and cryogen-free, eliminating contamination risks and making it suitable for use in cleanrooms and barrier facilities. It offers superior performance in terms of cell viability post-freezing and poses no fire hazard, unlike alcohol-based systems. The CRF-1 allows for highly accurate, reproducible, and controlled freezing rates, crucial for the cryopreservation of biological samples, ensuring optimal recovery upon thawing. Key Features: Cryogen-Free Design: The CRF-1 is free from liquid nitrogen and alcohol, offering a safer, cleaner alternative to traditional freezing methods. No contamination risk, making it ideal for use in sterile environments. Precise Cooling Control: The cooling rate is accurately controlled, especially for the critical nucleation/seeding phase, which ensures consistent and optimal recovery of cells. Wide Temperature Range: Capable of cooling down to -100°C with straws, offering a broad application range for biological cryopreservation. Simple Operation: The CRF-1 operates with or without a PC, and it can log data via PC software. Cooling profiles are displayed directly and can be customized. High Versatility: Compatible with cryovials, straws, bags, microplates, and Matrix-96-well block plates, allowing for research across multiple areas like stem cell research, transgenic embryos, mammalian cells, and more. Low Operational Costs: The CRF-1 runs at approximately 1% of the cost of liquid nitrogen-based freezing systems. Safety Features: Includes an optional Un-interruptible Power Supply (UPS) for complete cycle continuation in case of power failure. Compact & Quiet: Fits neatly on a bench-top and operates quietly, making it suitable for laboratory settings. Main Applications: Transgenic embryos research Rcjdpfx Aexv Dz Iolasf Stem cell research Clinical and research samples like lymphocytes and tissue cell lines Mammalian cell preservation (e.g., cardiomyocytes, adipose, liver, muscle) Cord blood-derived stem cells Adherent cells and stem cells in microplates Cell suspensions in numbered/barcoded arrays Robotic integration for high-throughput applications Veterinarian IVF applications Technical Specifications: Dimensions (w x d x h): 264 x 367 x 445 mm Weight: 9.8 kg Max Plate Temperature: 30°C Min Plate Temperature: -80°C (standard) or -100°C (dependent on model) Temperature Accuracy: ±0.5°C Temperature Stability: ±0.1°C Temperature Uniformity: ±1.0°C Max Cooling Rate: 10°C/min Max Temperature Stabilization Time: 5 minutes Key Benefits: Accurate and Reproducible Cooling Rates: Ensures controlled freezing rates and precise sample temperature management. Customizable Cooling Profiles: Choose from linear and non-linear profiles, or create your own tailored profile. No Cryogen or Liquid Nitrogen: Ideal for reducing contamination risk and the cost of liquid nitrogen. Low Running Costs: Estimated to cost only 1% of traditional liquid nitrogen-controlled freezing methods. End-of-Cycle Cooling Stability: Maintains a steady -100°...

Condition: excellent (used), Pallet racking Manufacturer: Nedcon Type: PR2 12 uprights, 4500 mm high 1100 mm deep Redszdyi Ropfx Alajcf 84 crossbars, cross-section 110/40 mm 31 shelves, chipboard, 1090 x 2680 x 40 mm Load capacity: 3 tons Very good condition

Condition: used, Year of construction: 2009, Overview This SMI SK 450 T is a shrink packer for PET bottles, built in 2009 by SMI (Italy). It collates bottles into pack formations, wraps them in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 45 packs per minute. It handles 0.5 l bottles in 3x3, 0.75 l bottles in 2x3 and 1.5 l bottles in 2x3 formats. The wrapping section is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the shrink packer of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Contrary to the pictures and videos, please note that the tray forming unit is no longer available. This unit has been removed and is no longer installed in the machine/line. Technical data - Manufacturer: SMI (Italy) - Model: SK 450 T - Year of manufacture: 2009 - Machine type: shrink packer for PET bottles with integrated heating tunnel - Output: up to 45 packs/minute - Pack formats: 0.5 l (3x3), 0.75 l (2x3), 1.5 l (2x3) - Location: Germany Equipment - Integrated shrink tunnel (heating oven) - Film wrapping unit with film roll holders - Machine-mounted touchscreen control panel - Full safety enclosure with viewing windows Condition Redpfxezuc Nzj Alaecf The machine is well maintained and has received extensive annual overhauls by the manufacturer. It is still installed and under power and remains in regular production, so it can be inspected in operation on site. Availability The machine remains in production until 30 September 2026. Dismantling and loading onto the buyer's trucks will take place between 7 and 10 October 2026 and can be carried out by the seller. The machine is located in Germany.

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets. New price currently around €250,000. Description: Complete system for dosing and packaging dry ice pellets. Fully automated process with high capacity and reliability. Advantages: Additional information about the bagging machine. System Dimensions: The entire system is 6 meters long, 3.20 meters high, and approximately 1.20 meters wide. The round turntable (disc) has a diameter of 1.5 meters. The system does not need to be installed in a completely straight line. The system can be rotated 90 degrees in two sections, creating a U-shape. This allows the machine to be installed in smaller spaces without affecting its operation. The height of the system is not adjustable. Machine Output: The machine has a capacity of approximately 500 kg per hour. Dimensions and Weight of the Bags: The bag sizes can be fully adjusted to your needs. This ranges from small bags of approximately 750 grams to larger bags of 20 kg. This can be flexibly adjusted to meet your production needs. Maintenance Costs: The average annual maintenance cost, excluding materials and call-out charges, is between €1200 and €1500 per year. Worldwide Shipping. Rodpfjw Ttxfox Alaocf Cold Jet Prime 600, Cold Jet Prime600, Cold Jet dry ice dosing & bagging system, dry ice dosing machine for sale, dry ice bagging machine for sale, dry ice production machine, dry ice production machine for sale, dry ice dosing and packaging system, automatic dry ice dosing machine, automatic dry ice bagging system, dry ice pellet production & packaging, dry ice packaging equipment, industrial dry ice production system, dry ice pellet production machine, dry ice pellet making equipment, dry ice pellet packing machine, pelletizer & bagging system, dry ice pelletizer bagger, cryogenic dry ice production equipment, CO2 dry ice production machine, dry ice manufacturing system, dry ice production & dosing system, used dry ice dosing machine, used dry ice production machine, refurbished dry ice machine, dry ice supply system, high-capacity dry ice production system, automatic CO2 pellet bagger, liquid CO2 to dry ice converter, dry ice bag filling machine, dry ice packaging automation system, industrial packaging machine for dry ice, high-output dry ice system, adjustable bag size dry ice, dry ice buffer tank system, 500 kg/h dry ice production, worldwide export dry ice machinery, industrial dry ice packaging, cold chain dry ice packaging equipment, food-grade dry ice packaging machine, logistics dry ice dosing & bagging, dry ice dosing & shipping solution, dry ice dosing system Netherlands, dry ice dosing system Noordwijkerhout, DrDryice, dry ice production equipment Europe, cryogenic pellet production systems, dry ice manufacturing equipment for sale, dry ice production line, dry ice pelletizer PR series, integrated dry ice dosing systems, industrial CO2 pellet production, dry ice automation system, dry ice bagging & dosing automation, high-reliability dry ice machine. DrDryice.

Condition: excellent (used), functionality: fully functional, TTK FG-SYS wall-mounted digital liquid leak detection and locating panel in a lockable metal enclosure. The unit is designed for continuous monitoring and precise location of conductive liquid leaks, including water, bases and acids, when used with compatible TTK sensing cables. It is suitable for data centres, server rooms, electrical rooms, commercial buildings, industrial facilities and other critical infrastructure. The FG-SYS can identify the location of a leak to approximately 1 metre, detect cable breaks and display alarm information on the integrated LCD screen. It can monitor up to 120 sensing-cable sections across three independent circuits, with a maximum cable length of 600 metres per circuit. Main features Manufacturer: TTK Model: FG-SYS Equipment type: Digital liquid leak detection and location panel Wall-mounted version Integrated LCD display and keypad Three independent sensing circuits Up to 40 sensing-cable sections per circuit Up to 120 sensing-cable sections in total Maximum monitored cable length: 1,800 m total Leak-location accuracy: approximately ±1 m Detection of leaks and sensing-cable breaks Audible and visual alarm indication 30-event alarm and fault history Eight configurable relay contacts Additional power-failure relay RS232 and RS422/RS485 communication Rjdpfx Aszlixqelaecf JBUS/MODBUS connection for BMS integration Lockable metal enclosure The FG-SYS is compatible with TTK FG-EC and FG-AC digital sensing cables and can also support compatible analogue sensing cables through the appropriate interface boxes

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm Rcodpfx Alszuyp Esaof - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 2007, Lamination press Manufacturer: Dimter Type: PROFIPRESS L2500 Year of manufacture: 2007 Technical data Wood dimensions to be processed Wood width, panels: 30 - 150 mm Wood thickness: 11 - 60 mm Wood inlet length: 800 - 2500 mm Panel widths, variable: max. 1300 mm Specific pressing pressure for cross-sections of 2500 x 60 mm: up to 1.6 N/mm2 The pressing surface per press cycle must not be smaller than 100 cm2 Filling width of the press per cycle: min. 650 mm / max. 1300 mm Max. filling area of the press per cycle: 3.25 m2 (The max. usable press width depends on the widths of the individual lamellas.) Wood type Softwood/hardwood Press without options Electrical connection, press: 7 kW Electrical connection, 40 kW generator: 56 kW Operating voltage: approx. 400 Volt / 50 Hz (C/s) Collection table extended to 3700 x 1300 mm, with stainless steel wood support Motor-driven multi-function slider Lamination press Profipress L 2500 Press bed area approx. 2500 x 1300 mm Sturdy base frame with lower press table made of stainless steel as a grounding electrode Quick-change stop guide sets for panel thicknesses of 19 - 40 mm, which can be hydraulically adjusted to the current filling width Hydraulic special pressure elements ensure uniform pressure distribution over the entire joint length and compensate for tolerances In multi-lane operation, filling widths may vary by a maximum of 15 mm Upper pressure plate with hydraulic drive generates high vertical pressing pressure for minimal displacement Integrated hydraulic unit for generating pressing force and driving the hydraulic motors Control cabinet and control panel Protective cladding Additional individual pressure elements from above Automatic gluing station with precision gluing head Infeed for different widths Camera Washing and rinsing device for gluing head Modem incl. software for online connection Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is non-binding. Rodpfszuzwqsx Alaocf

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor Rodpezu Aibefx Alaecf - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: used, amount 1 Palette Wooden crate containing a variety of metal parts. These include: -> Precision steel blocks -> Mold inserts / dies -> Semicircular segments / clamping jaws Redpfx Alozg Nk Asajcf -> Spacers / fitting pieces -> Clamping and jig parts -> Cylindrical and cross-section profiles Complete package price

Condition: good (used), Year of construction: 2007, operating hours: 10,490 h, functionality: fully functional, Channel baling press Presto HPK 20/50 S, year of manufacture 2007 Rjdpfozvbbrsx Alascf Manufacturer: Presto Type: HPK 20/50 S Year of manufacture: 2007 Operating hours: 10,490 (as of 08/2026) Drive: 22 kW Pressing force: 50 t Feed opening: 1200 x 700 mm (L x W) Channel cross-section: 700 x 750 mm Feed volume, max. 0.63 m³ Cycle time: 23 s Tying: 3-fold, automatic Throughput capacity at 35 kg/cbm: 2.9 t/h 60 kg/cbm: 4.3 t/h 100 kg/cbm: 6.3 t/h Bale weight: up to 450 kg Machine dimensions: 760 x 1350 x 2350 mm (L x W x H) Machine weight: approx. 7,500 kg Materials: paper, cardboard, film Note: The press is in good condition and is currently still in operation. An inspection is possible by appointment. The machine will be available from the end of 2026. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. The sale is made against prepayment, ex works, without warranty.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: AR200 tube and profile roll, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delsy, controller model: MG Touch Pro 15", pipe diameter (max.): 273 mm, tube wall thickness (max.): 20 mm, bending angle (max.): 200 °, number of axes: 9, working height: 2,200 mm, overall weight: 27,000 kg, total length: 2,850 mm, total width: 2,950 mm, total height: 2,930 mm, power: 29.42 kW (40.00 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 240 bar, number of digital displays: 6, Equipment: documentation/manual, emergency stop, Profile bending machine model AR200 brand MG srl year 2016 Capacity chart of the machine in enclosed. Model AR200 Pipe bending roll NR. 2 set of rollers for pipe bending SIZE 159MM - SIZE 139,7 MM Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic with gear unit each shaft Rcjdpfx Alsyx A Uujajf -side arms left/right side hydraulic move in 3 direction keeping aligned the profile being formed. -Control panel console NC programmable with automatic rolling, touch screen 15” , display the 9 axis of the machine with readout for manual use and fully programmable automatic forming -Electric power supply 3phase 400/50 Vac -40HP -Service manuals and operation books original. Additional set of rollers and tooling available for bending section HEB - IPE -UNP - ANGLE – T -SECTION- TUBULAR- IRON BAR ON EDGE - see capacity chart in enclosed ..

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x6, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 61,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - All-wheel drive - Aluminum fuel tank - Rear work lights Rsdjy T Ncnopfx Alascf - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - High beam - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Air horn - Particulate filter - PTO (Power Take-Off) - Radio / multimedia system - Reversing camera - Sliding roof - Sleeper cab - Seat heating - Sun visor/flap - Lane departure warning system - Stability control - Auxiliary heater - Warming-up automatic - Toolbox - Windshield Internal reference number for customer inquiries: 4-093 MAN TGS 33.520 6x6 BL Short Timber Platform Body with Epsilon Crane! Wheelbase: 3,900 mm !!! ALL-WHEEL DRIVE !!! !! IMMEDIATELY AVAILABLE FROM STOCK !! EURO 6E !! * Cab TM: the comfortable one (narrow, long, medium-high) * All-wheel drive 6x6 * Suspension type: leaf/air (BL) * 3,900 mm main wheelbase, 1,400 mm wheelbase between rear axles * Diesel engine MAN D2676 LF78, 520 HP, 2,600 Nm torque, Euro 6e * Automatic transmission MAN TipMatic 12.28 OD with Retarder 35 * Retarder Eco, speed-dependent, multi-stage, energy-efficient * High-performance engine brake MAN EVBec, multi-stage * Differential locks: front, rear, and center of the driven rear axles * Trailer coupling ROCKINGER type 500 G 6A (or 40 mm on request) * Control panel MAN EasyControl, 4 functions, operable from outside with door open * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment, and seat heating * Multifunction leather steering wheel, adjustable in height and angle * Lower bunk with slatted frame and adjustable head section * Electric interior sun visor on the front windshield * Pull-out refrigerator and drawer * Infotainment control MAN SmartSelect with touchpad and direct access * MAN Media System Navigation Professional, 12.3" * MAN Advanced Sound System with subwoofer * Smartphone integration Superstructure: Loading length up to crane base 6,100 mm (Austria and South Tyrol special version) * Platform dimensions approx. 5,700 mm length, 2,540 mm width * Platform color: black * 8x OPTIPA ALU10 stakes with quick-change wedges, so stakes are removable anytime (for transporting sawn timber, straw, hay, or silage) * Stakes can be stored upright in front of the headboard * Rack strips between the stake pockets * Lashing points on the outer frame * Robust steel headboard * Extendable ladder at the front and rear for access to the platform * Prepared for manual strap tensioners (Autonordic) or alternatively Luftmann (ExTe TU) * Stainless steel toolbox under the loading area Crane: EPSILON FULLY HYDRAULIC TIMBER LOADING CRANE* -> Version according to your choice (e.g. in stock: Epsilon TZ15 98) * Maximum moment: 104 kNm * Slewing range: 425° * Elevated seat with 2 mechanical levers, 2 mechanical foot pedals * And much more. Financing available through our finance partners. For further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and amendments.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 2,245 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,380 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 x 10½, rear tire type: cushion tires (black), rear tire size: 23 x 10 x 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, # 🚜 COMBILIFT CB3000 | LPG | 4900 MM | FORK POSITIONER | SIDE SHIFT | FULL CABIN | READY FOR WORK ✅ ## 🔧 FULLY SERVICED MACHINE | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY AVAILABLE If you are looking for a forklift that will generate value from day one instead of incurring maintenance costs, this machine is the perfect solution. We offer a modern and fully prepared COMBILIFT CB3000 multidirectional forklift, professionally serviced, thoroughly inspected, and ready for immediate operation in warehouses, production facilities, timber yards, steel service centers, and logistics environments. --- ## ⭐ Key Benefits ✅ Fully serviced prior to sale ✅ Start-up warranty included ✅ Excellent technical and cosmetic condition ✅ Low operating hours – only 2,245 h ✅ Ready for immediate operation with no additional investment required ✅ Live online demonstration available ✅ Direct delivery to your facility available --- # 📋 TECHNICAL DATA 🏭 Manufacturer: COMBILIFT 🚜 Model: CB3000 📅 Year of Manufacture: 2023 🔢 Serial Number: 73868 ⚖️ Capacity: 2,500 kg 📏 Load Center: 600 mm ⛽ Engine: Kubota LPG Gas ⚙️ Engine Power: 42 kW 🕒 Operating Hours: 2,245 h ⬆️ Lift Height: 4,900 mm 🏋️ Machine Weight: 6,300 kg --- # 📐 DIMENSIONS 📏 Overall Height: 2,250 mm 📏 Construction Height: 2,250 mm 📏 Overall Length: 1,550 mm 📏 Overall Width: 1,550 mm 📏 Fork Positioner Width: 1,400 mm --- # 🔩 FORKS 📌 Fork Length: 1,200 mm 📌 Fork Section: 120 x 50 mm --- # 🛞 TIRES Front: 16 x 7 x 10½ Rear: 23 x 10 x 16 --- # 🛠️ EQUIPMENT ✅ Full enclosed cabin ✅ Heating system ✅ Radio ✅ Hydraulic fork positioner ✅ Side shift ✅ Working lights ✅ Kubota LPG engine ✅ Multidirectional steering system ✅ Operator comfort package --- # 🏭 IDEAL FOR 🌲 Timber and wood processing industry 🪑 Furniture manufacturers Redpfxozv Nhye Alaocf 🏗️ Steel mills and steel service centers 🔩 Aluminium and PVC profile handling 📦 Handling of long loads ↔️ Narrow aisle operations 🏢 Indoor and outdoor applications --- # 🤝 WHY CHOOSE FT LOGISTICS? When purchasing from FT LOGISTICS, you are working with a company specialized exclusively in: ✅ Sideloaders ✅ Multidirectional forklifts ✅ Long-load handling equipment ✅ Specialist material handling solutions Every machine undergoes a comprehensive technical inspection, full service, and operational testing before delivery. 🌍 With more than 100 machines available from stock, we supply customers throughout Europe, South America, Africa, Asia, and the Middle East. --- # 🚀 WE PROVIDE 🔧 Full service before delivery 🛡️ Warranty 👨‍🔧 Professional technical support 💰 Leasing and financing assistance 🚛 Transport organization 📄 Export documentation and customs support 🔩 After-sales service --- Hundreds of customers across Europe trust our equipment and continue to return for future purchases. 📹 We can arrange a live online demonstration. 📸 Additional photos and videos available upon request. 🚛 Customized transport quotation available for any destination worldwide. --- # FT LOGISTICS ### 🚜 We Deliver Machines Ready for Work.

Condition: used, Year of construction: 2024, functionality: fully functional, Year of manufacture: 2024 Cutting ranges: Cutting range 90° round 360 mm Cutting range 90° flat (W x H) 360 x 360 mm Clamping range 0 - 360 mm Smallest section length 10 mm Smallest dimension to be cut 10 x 10 mm Shortest remaining piece length in automatic operation (only possible with geometrically flawless surfaces) 35 mm Shortest remaining piece length in single cut 10 mm Dimensions and weights: Overall dimensions (L x W) 1,650 x 2,900 mm Height 2,030 mm Material support height 700 mm Weight 3,450 kg Performance characteristics: Saw motor, frequency-controlled 4 kW Total connected load 6 kW Single material feed length 500 mm Multiple feed length 9,999 mm Machine roller track, length 1,100 mm Ball-bearing mounted, robust transport rollers 8 pieces Roller diameter 60 mm Roller axle spacing 135 mm Rcedpfozv Th Dsx Alaef Cutting speed, continuously variable 12 - 150 m/min Saw blade dimensions 6,096 x 34 x 1.1 mm Alternatively 6,096 x 41 x 1.3 mm Cutting feed: electrically adjustable via ball screw Material feed: ball screw Material clamping: hydraulic Saw blade cleaning: self-adjusting chip removal brush, electrically driven Coolant: Pump capacity 75 l/min at 2 m head, Coolant tank volume approx. 100 l Paint finish: Light grey RAL 7035, anthracite grey RAL 7016 textured paint Compressed air connection: approx. 6 bar required (customer-side) KASTO sawing machine control ProControl 9" Hardware  Industrial PC, fanless, no moving parts  Robust metal housing, aluminum front panel  Resistive touchscreen  Color TFT display 9"  Ambient temperature 0 - 50 °C  Protection class, front: IP65 Software  Operating system Windows 10 Enterprise LTSC 2019  SIMATIC S7 - 1500 Failsafe Software Controller CPU

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013965, empty load weight: 7,180 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Please note: the images shown are archive photos for illustration only! 2 units available #Chassis / Tractor Semi-Trailer Additional splash guard panel riveted to the underside of the floor, in the neck area above the tractor unit's rear axle and above the wheels; reinforced frame for loads extending to the outer frame, outer frame fitted with "Load-Lock" profile at approx. 400 mm intervals 10 pairs of mushroom-head lashing points recessed into the top/outer edge of the outer frame, 10 t each 24 t twin-speed landing legs, single-side operation, with semi-round foot and straight base plate, with thrust compensation Telescopic rear support legs Hook rail for leaning-type loading ramps across the full width of the rear pull-out Mechanical rear pull-out with hand crank, extendable by approx. 1,500 mm, lockable every 500 mm, incl. extendable rear underrun protection with lighting Storage compartment for loading ramps integrated in the rear pull-out, usable only when the rear pull-out is extended by approx. 1,000 mm 1 pair of ramps, 3,000 mm long, 300 mm wide, load capacity 6,000 kg per pair Electric winch, 24 Volt, pulling force approx. 8,165 kg, mounted centrally at the front, operated by wireless remote control #Axles & Suspension Axles/chassis laser-aligned – reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally electrically operable from the towing vehicle, incl. forced lowering and traction assist SAF or BPW drum brake axles, manufacturer's choice #Wheels & Tyres 235/75 R 17.5" make at manufacturer's discretion Steel wheels in twin arrangement, factory silver #Electrics 24 Volt, LED multi-chamber lamps, yellow LED side marker lights, LED number plate light 2 white LED front position lamps 2 white/red LED rear outline marker lamps on flexible mounting arms 2x 7-pin and 1x 15-pin fool-proof connector sockets at the front, without connecting cable 2 additional LED work lamps at the rear 1 beacon light with bracket 2 pairs of warning panels, dual LED-illuminated and extendable to 3,000 mm, removable via plug connector Additional 7-pin socket (to ISO 1724) in the rear underrun protection LED work lamps on the sides, 1x each on the left and right #Floor Chequered aluminium floor (Lohrblech type) of welded construction; rear pull-out walkway area fitted with chequer plate, centre section in steel chequer plate #Country of Registration / Plates Rjdpfx Aozu Aqxelaocf Germany With DEKRA inspection and certification (pursuant to §13 EC-FGV) 24/7 service hotline Prepared for single-row number plate holder Contour marking with reflective tape to ECE R048, yellow on the sides and yellow at the rear Warning panel to ECE-70 Combination type approval report for applying for a §70 permit for a towing vehicle, on collection from the Triptis plant (please note the maximum permissible gross train weight in the tractor's registration documents; apply for an uprating beforehand if required – this is at the manufacturer's discretion and is not guaranteed; any resulting costs will be invoiced separately) 1 to 3 "Angles Morts" blind-spot stickers (as required by regulation and technical feasibility) #Paintwork Frame hot-dip galvanised incl. passivation 15-year warranty against corrosion perforation Support/landing legs feet black coated 2 units available

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. Rcedpfx Aezrg T Eelajf System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: used, Year of construction: 2000, Gathering machine / booklet making Theisen & Bonitz TB Sprint 314 flex HP with QSM 303 14 stations, manual feeder TB Sprint flex 314 HP Format (max.): 350 × 500 mm Stack height: up to 650 mm Performance: - Up to 3,300 cycles/hour in 1:1 operation - Up to 4,200 cycles/hour in 1:2 operation TB B303 QSM Stitch-fold-cutting unit Formats open max.: 35 x 50 cm Open formats min.: 6.5 x 15.5 cm Smallest brochure: 6.5 cm spine length x 4 cm with head-foot trimming: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm Redpfx Alezictpjajcf with head-foot trimming: 34.6 cm spine length x 4 cm Output: up to 3100 work cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorized format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper

Condition: excellent (used), mileage: 136,029 km, fuel type: diesel, color: red, lifting height: 37,400 mm, mast type: telescopic, Year of construction: 2016, operating hours: 7,578 h, = Additional Options and Accessories = - PTO = Further Information = General Information Year of manufacture: 2016 Intended use: Construction Technical Information Number of cylinders: 6 Drive: Wheeled Functional Mast: Telescopic (4 sections) Mast length: 37.4 m Lifting capacity: 40,000 kg Superstructure brand: TEREX AC40 CE marking: yes Condition Technical condition: very good Visual condition: very good TEREX AC40 CRANE DRIVE 4X4X4 COUNTERWEIGHT 5.5 TONS CARRIER 136029 KM AIR CONDITIONING AUTOMATIC TRANSMISSION TIRES 60% GOOD SIZE 445/95/R25 ADBLUE CENTRAL LUBRICATION SYSTEM UPPER STRUCTURE HEATING 1 TIMBER SLEEPER 15 T. 1X WINCH Rcodsuxu Dtspfx Alaef MAX. LIFTING CAPACITY: 40,000 KG MIN / MAX BOOM LENGTH 9.5 M / 37.4 M MAX WORKING HEIGHT 37.4 METERS CE CERTIFICATE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: used, empty load weight: 6,789 kg, maximum load weight: 32,211 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,700 mm, Year of construction: 2018, Equipment: ABS, Tare weight: 6789kg, GVW: 39000kg, Loading area (L W H): 13,620 mm x 2,480 mm x 2,730 mmTyre size: 385/65 R22.5, Loading area volume: 92 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Lift axle front, Electronic Brake System EBS, Toolbox, Spare wheel carrier double, Ferry lashings, Bolted chassis, 1x15 and 2x7 pin plug, Antispray, 2 units of LED reversing lights luminium ladder, length 3000mm with parking position at the mainrail lashing rings 5/15 pairs of traction each lug 400mm wear plate to reinforce last floor section (crash plate), Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Rcedpfxey Ntv Dj Alaof

Condition: used, mileage: 525,800 km, power: 355 kW (482.67 HP), first registration: 01/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, total length: 9,750 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, DAF XF 480 – ACC – STATIONARY AIR CONDITIONING – FULL AIR SUSPENSION – LIFT AXLE – CHASSIS – SUPER SPACE CAB – VEHICLE HISTORY * German vehicle * Video of the vehicle available upon request (interior & exterior views) Vehicle: DAF XF 480 * 525,800 km * First registration: 10.01.2019 * Euro 6 Rsdpfjzvt Htsx Alascf * Diesel * 355 kW (480 hp) * Swappable chassis Engine & Driver Assistance: * ACC (Adaptive Cruise Control) * Speed limiter * Retarder * TC (Traction Control) * Differential lock * Hill start assist * AEBS * Lane departure warning system * DPF regeneration system Transmission: * Automatic transmission Comfort & Interior: * Leather steering wheel * Multifunction steering wheel * Electric windows * Heated side mirrors * Stationary heater * Stationary air conditioning * Thermobox * 2 bunks Suspension: * Full air suspension Axle 1: * Air suspension * Tires: 385/65 R22.5 * Axle load: 8,000 kg Axle 2: * Air suspension * Twin tires * Tires: 315/80 R22.5 * Axle load: 11,500 kg Axle 3: * Air suspension * Lift axle * Tires: 385/65 R22.5 * Axle load: 7,500 kg Weights: * Permissible total weight: 27,000 kg * Technically permissible total weight: 28,000 kg Tank: * Fuel tank: 544 liters * AdBlue Trailer Coupling: * Rockinger trailer coupling EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATES, AND 17-21 DAYS AUSTRIAN LICENSE PLATES EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU & third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Changes, errors and prior sale are subject to change! You can find more vehicles on our homepage: Sales are made exclusively according to our general terms and conditions - see homepage. Important note - important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal note: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the purpose of initiating a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.