Used Rima Rs 1012-S for sale (69,156)

Condition: used, mileage: 500 km, power: 382 kW (519.37 HP), first registration: 12/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH chassis, new vehicle with day registration, 33-tonne version, 6x4 drive, wheelbase 3.60 m, 520 HP, with PTO, air conditioning, auxiliary heater, trailer coupling with 50 mm pin, manufacturer’s warranty, and much more. MAN manufacturer’s warranty until 16.12.2026 MAN ATS warranty until 16.12.2027 Commercial tonnage: 33 tonnes Permissible gross vehicle weight: 26,000 kg Technical permissible total vertical load: 28,000 kg Lajdpfx Aijx Txxlsijb Mileage approx. 1,335 km transfer distance Medium-high design Driver's cab NN short Diesel engine with 382 kW (520 HP) and 2,650 Nm torque 6 x 4 drive Wheelbase: 3,600 mm, rear frame overhang: 800 mm Differential locks on rear axles Automatic transmission: MAN TipMatic 12.28 OD Transmission PTO, transmission-dependent, type NTX/10c, without flange, f=1.15, position approx. 3:30 High-performance engine brake MAN EVBec, multi-stage Transmission function MAN EfficientRoll Transmission function Rock-Free Transmission function MAN Idle Speed Driving Transmission for increased thrust ratio in driving mode Driving programs: MAN TipMatic Performance and Efficiency up to 70,000 kg Driving program: MAN TipMatic Offroad up to 70,000 kg Driving program: MAN TipMatic Manoeuvre, shunting mode MAN EasyStart hill hold assistant Steering system: MAN ComfortSteering Emergency brake assist Emergency braking assistant EBA Lane departure warning LDW Attention assist: MAN AttentionGuard ABS Offroad with additional off-road logic EBS, ASR, ESP Front axle with leaf suspension, rear axles with air suspension Front axle: 9,000 kg, rear axle: 13,000 kg Front axle spring capacity: 9,500 kg Stabilizers and shock absorbers on front and rear axles Axle ratio: i=4.00 Trailer coupling jaw: ROCKINGER type 500 G 6B for trailer load up to 24,000 kg Tech. Plus Permissible train weight: 44,000 kg Tech. Plus Climatronic (automatic climate control) Additional water heater 4 kW Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind the cab roof 2 rotating beacons on the cab roof LED daytime running lights LED tail lights and side marker lights 2 LED contour lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operating panel, 4 functions, can be operated from outside when the door is open Air-suspended and heated comfort driver’s seat Comfort upholstery Smartphone integration MAN SoundSystem Advanced MAN MediaSystem Advanced Navigation 7 inch New vehicle with day registration and MAN manufacturer’s warranty Net price plus 19% VAT. Attractive financing offers available on request. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2571

Condition: used, Year of construction: 2000, workpiece dia. ~ 10 - 100 mm Lajdpoy Tbrzsfx Aiiob grinding band dimension 120 x 3.500 mm engine 4 kW Round rod sanding machine Löser type RS 100 for sanding and processing round rods, handles and cylindrical workpieces made of wood. The machine enables an even surface finish and is particularly suitable for handrails, round bars, tool handles and similar long parts. Includes a batch of various new sanding belts.

Condition: used, Universal milling machine, console milling machine SIMPLON type UN-S / Universa-Super Machine. No.: 17220 Year of construction 1979 Lsdpfjifu Arjx Aiijab Travel X: 900 mm, Y: 240 mm, Z: 400 mm Table size 1300 x 300 mm Tool holder SK 40 - M16 Spindle speed 50 - 1750 rpm. 16 steps Feed X, Y, Z-axis 11 - 500 mm/min. Rapid traverse 2400 mm/min Motor power main spindle 4 KW Connected load 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN, type VRZ 750 (X-scale missing) - Main spindle drive via 16 gear stages - Right and left rotation of the milling spindle - Vertical milling head swivels +/- 90 - Boom can be moved manually 700 mm from the milling head - Manually extendable lateral counter bearing holder with dovetail guide 450 mm - Mechanical tool clamping with M16 tightening screw - Coolant device in the machine base - Electrical control cabinet on the machine Space requirement L x W x H 1600 x 1850 x 1850 mm Weight 2400 kg Good condition

Condition: good (used), functionality: fully functional, machine/vehicle number: RGO4178, mileage: 63,338 km, power: 88 kW (119.65 HP), first registration: 01/2023, fuel type: diesel, empty load weight: 2,143 kg, maximum load weight: 897 kg, overall weight: 3,040 kg, wheelbase: 3,450 mm, next inspection (TÜV): 05/2028, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 5,413 mm, total width: 2,050 mm, total height: 2,522 mm, loading space length: 3,100 mm, loading space width: 1,860 mm, loading space height: 1,920 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, airbag, car registration, central locking, electric window regulation, electronic stability program (ESP), full service history, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, start-stop system, tire pressure monitoring, truck registration, Special equipment: Electronic parking aid, wooden floor in the cargo area, automatic climate control, fuel tank: 90 liters, cargo partition wall, radio preparation, 4 speakers, full-size spare wheel (including spare wheel bracket), seats in driver’s cab: adjustable passenger seat with armrest and lumbar support, half-height lining in load/passenger compartment (up to seatbelt level) Ledpfey Tn Eujx Aiijab Additional features: Driver’s airbag, brake assist, rear wing doors without windows, body/construction: high-roof panel van standard, body variant: high roof, heated crankcase ventilation, removable bulkhead (without window), adjustable steering column (steering wheel), model update, engine 2.2 liters – 103 kW Multijet turbo diesel, wheelbase 3450 mm, low emissions according to Euro 6d standard, sliding door right side load/passenger compartment, double passenger seat in driver’s cab, driver’s seat with armrest and lumbar support, start/stop engine system, lightly tinted glazing.

Year of construction: 2024, condition: new, YOU BUY DIRECTLY FROM THE MANUFACTURER Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Ledpofirwmofx Aiisab Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC DT 15 Servo motor backgauge & linear guided ball screw system (X-R) CNC Crowning European type tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standard electrical equipment according to worldwide standard Optional equipment CE Manuel F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M Motorised + FPSC (Safety PLC) CE BLVT safety - only for tandem machines Z1, Z2 Axes X1, X2 Axes R1, R2 Axles Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm - rear protection with light barrier AP3-AP4 Bending aid Height-adjustable laser angle measurement system Quick clamping system Hydraulic and pneumatic tool clamping system Upper and lower tool Lower tool positioning system Parking area Central lubrication system Oil cooler Additional stop finger and additional movable support arms Special packaging for overseas transports _____ With over 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced manufacturing facilities

Condition: good (used), Original spacer rings PAUL in various widths for edging saw KME 2 or BM, outside-Ø 120 mm, bore-Ø 75 mm, with 2 keyways Original PAUL saw bushings with effective clamping lengths of 55 mm and 110 mm for the KME 2 and BM Original PAUL spacer rings in various widths for S 900 re-cutting saw, outside-Ø 150 mm, bore-Ø 110 mm, with 2 keyways Ljdpsiimz Aefx Aiijab

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 13,530 h, load capacity: 46,000 kg, lifting height: 16,200 mm, fuel type: diesel, construction height: 4,900 mm, power: 257 kW (349.42 HP), empty load weight: 83,700 kg, total length: 12,000 mm, drive type: Diesel, construction width: 4,185 mm, Full container reachstacker Load center: 1780 Transmission: Dana TE32FF Condition: Ready for use and fully functional Technical condition: very good Front tires type: Pneumatic Lajdpfxjy Rvkas Aiiob Front tires size: 18.00-33 Rear tires Type: Air Rear tires Size: 18.00-33 EN: hydraulic support jacks for increase of capacity hydraulically sliding cabin central greasing system for chassis, boom + spreader rear view camera air-condition (automatic climate control) automatic spreader adjustment 20'-40' DE: hydraulic support for higher load capacity with larger outreach 2x central greasing for chassis, boom and spreader hydraulically sliding cabin with electronic air-condition automatic spreader adjustment 20-40 rear view camera

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, overall weight: 29,000 kg, spindle speed (max.): 6,000 rpm, number of axes: 5, This 5-axis HEDELIUS RS 100 K MAGNUM was manufactured in 2009. It features a travel range of 3500 x 1000 x 770 mm and a rotary-tilting table with a 1200 kg max workpiece weight. The spindle operates at speeds up to 6000 rpm, and the machine includes a 50-tool capacity magazine. If you are looking to get high-quality milling capabilities, consider the HEDELIUS RS 100 K MAGNUM machine we have for sale. Contact us for more information. • Rotary-tilting table travel (X/Y/Z): 1000 / 1000 / 770 mm • Distance spindle nose to table: • Fixed table: 120–890 mm • Rotary/tilting table: 175–945 mm • Table surface: • Fixed table: 2100 × 1000 mm Lajdpfx Aiex D Im Rsijb • Rotary/tilting table: 1000 × 800 mm • Table height from floor: • Fixed table: 950 mm • Rotary/tilting table: 895 mm • Max. workpiece weight: • Fixed table: 2000 kg • Rotary/tilting table: 1200 kg • Spindle diameter (front bearing): 90 mm • Tool taper: MAS 403-1982 BT50 • Feed rates (X/Y/Z): 0–30,000 mm/min • Max. feed force: 15,000 N • Tool magazine capacity: 50 tools • Max. tool diameter: 100 mm • Max. drill diameter: 70 mm • Power supply: 40 kVA, 50 Hz

Condition: used, Year of construction: 2023, functionality: fully functional, RS-1R: 47,000 CPH RS-1R: Up to 370 × 650 mm RS-1R: Supports parts ranging from ≤3mm to 25mm in height RS-1R: Compact boards, precision at high speed SW plus 2 feeder trolleys and standard accessories included. Ljdpfx Aiey R Swcjijab No feeders. Can be bought new! Ask for a quotation!

Condition: like new (used), Year of construction: 2017, GUK RS 21/070 Roller Folding Machine This automatic machine is an add-on unit for packaging lines. Suitable for brochures with 4 folding pockets. Technical data: Folding unit: 210 mm feed width Laodoyuybpopfx Aiijb Output up to 300 sheets/min Min. format (W x L): 60 x 105 mm Max. format (W x L): 210 x 340 mm Manufacturer: GUK Year of manufacture: 2017 Space requirement: 130 x 70 x 80 cm

Condition: good (used), Year of construction: 2007, functionality: fully functional, 10 cup wheels vertical glass edging machine + water cleaning system Clean 20 glass thikness : 3 - 30 mm min. glass size : 50 x 50 mm Lodpfoyhpqasx Aiioab max. glass weight : 1000 kg working height : 812 mm total power : 16,3 Kw water tank capacity : 422 L working speed : 0,5 - 5,5 m/min. weight : 2890 kg The machine has worked with a flocculant . 67000 working meters

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 06/2027, total length: 700 mm, overall weight: 258 kg, total width: 550 mm, total height: 1,670 mm, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 258 kg, Battering Machine Boku RS 40 E Laedpfx Aisy Rhggoiob 2 operating modes: 1 x mixing / 1 x whisking Boku/Diosna Model: RS 40 E Continuously adjustable speed 1 mixing whisk, 1 whipping whisk 1 x 40 liter stainless steel bowl Adjustable working/mixing shaft Bowl lift with servo-assist Connection: 400V, 16A-CEE plug Only with us: DGUV V3 tested Used machine, overhauled with warranty Visit our large bakery equipment exhibition!

Condition: used, Year of construction: 1976, material width 400 mm coil weight 3,0 t coil internal diameter 460 - 560 mm coil external diameter 1500 mm material thickness 0,6 - 3,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm number of draw-in rolls 2 x 120 mm power capacity 5,0 + 1,5 kW dimensions decoiler (WxDxH) 2,5 x 1,4 x 2,4 m Laedpovzxq Esfx Aiijb weight decoiler 1,8 t dimensions straightener (WxDxH) 1,2 x 1,5 x 2,4 m weight straightener 1,3 t Straightening machine (type RS 67-04 / 0) with geared motor, driven lower straightening rolls, straightening rolls hardened and polished, straightening rolls individually manually adjustable, pneumatic intermediate lifting of the in-feed rolls, roller basket, coil loop control Decoiler (type BA 1-04/030) not driven, with lag break, manual centralized expansion, hydraulic snubber roll, lateral movement, hydraulic lifting table

Condition: used, Year of construction: 1982, pressure 150 t throat 520 mm stroke 30 - 200 mm no. of strokes 15 - 60 /min distance table/ram, max. stroke up, adjustment up 650 mm table surface area 1600 x 1000 mm hole in the table 1040 x 140 mm table height over floor 1000 mm Lsdevuudbspfx Aiijab passage to the back 1000 mm ram surface 1400 x 800 mm ram adjustment 120 mm power requirement 20,0 kW weight 27,5 t dimensions (WxDxH) 2,3 x 2,75 x 4,5 m with infinitely variable drive, pneumatic clutch/brake combination (make Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, semi-automatic ram adjustment

Condition: ready for operation (used), Unipo 2TT0901CAN02A UFP 10.4" S TFT monitor, SN: 86351, used, in good condition, 100% functional, scope of delivery as per photos. Lajdpey Ntcdefx Aiieb

Condition: ready for operation (used), Mitsubishi HA23NC-S servo motor SN:14004 + OSA253S2 encoder SN:J4AVU426G7V ,used, normal signs of wear, 100% functional, scope of delivery according to photos Laodpfei D I Nuox Aiijb

Condition: ready for operation (used), Mitsubishi HA33C-S synchronous servo motor SN:M54644060 + Tamagawa OSE 12.5KN-6-12-0 encoder SN:7945T, used, normal signs of use, 100% functional, scope of delivery as per photos Ljdpji D I N Uefx Aiieab

Condition: ready for operation (used), Siemens 1FT6082-1AH71-1AG1 AC-VSA motor SN: YFN917599401005 with B01 2048 S/R encoder, used, in good condition, 100% functional, scope of delivery as per photos. Ljdpfoy Nppysx Aiieab

Condition: ready for operation (used), Baumüller DSG 56-S servo motor SN:95200071, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Lasdoi D E D Dspfx Aiijb

Condition: ready for operation (used), Mitsubishi HA43C-S servo motor SN:74003 ,used, strong traces of use, 100% functional, scope of delivery according to photos Lajdpfx Aioi D I Rroijb

Condition: ready for operation (used), Mitsubishi HA 80C-S / Z637260 servo motor SN:55030 ,used, strong traces of use, 100% functional, scope of delivery according to photos Laedsi D I I Eepfx Aiijb

Condition: ready for operation (used), Mitsubishi HA23NCB-S servo motor SN:83008 + OSA253S encoder SN:J4AVQ448127, used, normal signs of use, 100% functional, scope of delivery as per photos Laodpfxsi D I Nxe Aiijb

Condition: ready for operation (used), Mitsubishi HA33NC-S servo motor SN:15017 + OSA253S2 encoder SN:J4AVU492R6S ,used, normal signs of wear, 100% functional, scope of delivery according to photos Ljdpfji D I Rgjx Aiisab

Condition: used, Year of construction: 1994, functionality: fully functional, feed length X-axis: 1,400 mm, feed length Y-axis: 650 mm, feed length Z-axis: 850 mm, spindle speed (max.): 3,000 rpm, front and vertical axle Laedpfxoxhfmio Aiijb

Condition: excellent (used), fuel type: diesel, first registration: 02/1997, Year of construction: 1997, HATZ DIESEL 2L40CH Tank 1200 litres = Further information = Gross vehicle weight: 3,800 kg Technical condition: very good Ljdpfxeydfa Aj Aiieab Visual condition: very good Serial number: 12057 Please contact Thierry Leemans for further information.