Used Rittal Sz 2368.000 for sale (568)

Condition: used, mileage: 552,433 km, power: 330 kW (448.67 HP), first registration: 06/2012, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * 1st owner * New TÜV (German vehicle inspection) Nwsdpfxey Ucrls Akusg Special equipment: Emission standard EURO 5 EEV, Airbag driver side, Work light on the rear wall of the cab above, Audio system: CD radio (Bluetooth), Exterior mirror on the right with reversing position, Compressed air connection in the cab, Air horn, Driving assistance system: Attention Assist (fatigue detection sensor), Driving assistance system: Brake Assist (Active Brake Assist 2), Driving assistance system: Lane keeping assist, Windshield tinted, Info display 12.7 cm with additional display, Automatic climate control, Fuel tank: 390 L aluminum, Light and rain sensor, Air intake behind the cab, Mounting plate / saddle plate 12 mm for saddle coupling, On-board unit for toll collection, Retarder, Rotating beacon left/right, Reversing warning audible (warning signal outside), Saddle coupling, low maintenance, Seats in the cab: Armrest co-driver seat, Seats in the cab: Driver's seat suspension seat comfort, Sun visor outside, Sun protection roller side window, driver's door, 12V socket in the co-driver footwell, 24V socket in the co-driver footwell additionally, Fleetboard preparation, Oil cooler transmission Additional equipment: Emission standard EURO 5, Axle configuration: 4x2, Axle load front axle 7.5 t, Actros 4, Trailer socket 24V / 15-pole, Work lights, Exterior mirrors electrically adjustable and heated, Differential lock rear axle, Compressed air tank steel, Compressed air unit medium, Cab: Width 2.30 m, Cab: L StreamSpace, Cab: steel-sprung, Comfort, Cab floor with engine tunnel 170 mm, Suspension: leaf spring / air, Suspension: front spring bracket aluminum, Suspension: front springs 7.5 t, 1 leaf, Window lifter electric, Generator 100 A, Transmission 12-speed - Type: G 211-12, Urea tank (AdBlue): 60 L, Rear axle bevel gear 440, Body / structure: semi-trailer tractor, Comfort bunk lower, Comfort locking system, Communication interface, Fender 3-part, Radiator grille, Steering assistance pump regulated, Air compressor 2-stage, Engine 12.8 L - 330 kW R6 Diesel (OM 471), Engine brake, Engine compartment encapsulation, Wheelbase 3700 mm, Ramp mirrors, Spare wheel, Waste heat recovery, Disc brakes front and rear axle, Seat cover / upholstery: fabric, Seats in the cab: Co-driver function seat, Seats in the cab: Driver's seat backrest foldable, Voltage converter 24V / 12V 10 A, Splash guard front, Stabilizer front axle, Storage flap outside left, Socket cab 24V, Tachograph / EC control unit, Door extension for cab, Underbody cladding aerodynamically shaped, Underrun protection front, Preparation CB radio, Preparation toll collection, Front axle cambered, Water pump regulated, Permissible total weight 18.00 t, Auxiliary heater (water)

Condition: new, Year of construction: 2026, machine/vehicle number: 93934631, fuel type: diesel, motor manufacturer: QSZ13-G10, General information Field of application: Construction Weights Empty weight: 5.255 kg Functional Generator capacity: 600 kVA Dimensions of cargo space: 451 x 160 x 250 cm CE mark: yes Other information Fuel consumption: 80 Liter per Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 875 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy Nwjdpfey T D Daox Akuog - Tank = Remarks = Including Coolant Heater and Battery Charger

Condition: new, empty load weight: 6,770 kg, maximum load weight: 35,230 kg, overall weight: 42,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 385/65 22,5, tire condition: 100 %, color: blue, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, Requesting all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Ask our trained specialists; we will be happy to advise you. Nwedpfx Asy Uaamskusg

Condition: good (used), axle configuration: 2 axles, first registration: 12/2015, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, total length: 9,810 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2015, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 2, Tare weight: 5560 kg, Gross vehicle weight: 18000 kg, Chassis type: Full chassis, ABS, EBS, Axle type: BPW, Tail lift, Tail lift design: Rear door, Load capacity of the tail lift: 2000 kg, Tail lift manufacturer: Bar cargolift, Tail lift material: Aluminum, Tail lift size: 230x252, Battery for loading ramp, TAILLIFT // LOADING PLATFORM // BEVERAGES = Additional Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 8 mm Axle 2: Tire tread depth left: 11 mm; Tire tread depth right: 11 mm Weights Tare weight: 5,560 kg Payload: 12,440 kg GVW: 18,000 kg Functional Tail lift: Bar cargolift, Rear door, 2000 kg Height of the loading platform: 128 cm Environmental Emission class: Euro 0 Nwjdpfxjymwvue Akujg Condition Technical condition: good Optical condition: good Damage: Damaged vehicle (not roadworthy) = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It’s simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask directly about our European warranty package.

Condition: used, mileage: 729,000 km, power: 330 kW (448.67 HP), first registration: 04/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: air conditioning, * Mercedes Actros 1845 SZM * First registration: 2015 * 729,000 km * EU6 emission standard * 4 x 4 steering axles (one side defective) * Leaf spring - air suspension * Automatic transmission * Air conditioning * Retarder * Tipping hydraulic system * Aluminum rims Nodpfx Aoy U Da Dekuowg * Unladen weight: 8,210 kg * Wheelbase: 3.75 m

Condition: excellent (used), Catalogue number 7781 TECHNICAL SPECIFICATIONS - Maximum milling height: 216mm - Maximum milling depth: 65mm - Maximum cutter diameter: 250mm - Spindle working length: 500mm - Spindle speed: 4600 rpm Njdpfx Akjy Uxq Deuowg - Spindle diameter: 40mm - Max tool diameter: 250mm - Worktable dimensions (L/W): 890x400mm - Motor: 11kW - 2 pneumatic material clamps - Air requirement: 6-8 bar - Dust extraction port diameter: 160mm - Dimensions (L/W/H): 1330x1200x1470mm - Weight: 970kg ADVANTAGES – Polish manufacture – Not repainted – Used milling machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (calculated at 4.2 EUR exchange rate) (Prices may vary depending on significant fluctuations)

Condition: new, empty load weight: 6,770 kg, maximum load weight: 35,230 kg, overall weight: 42,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 385/65 22,5, tire condition: 100 %, color: blue, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, Reference number for inquiries: 41004 Wielton, steel tipper * Year of manufacture: New vehicle * ABS, Anti-lock Braking System * EBS, electronic brake system * Lift axle * Connector plug 2x7-pin * Connector plug 15-pin * Lifting and lowering mechanism * Storage box / toolbox * Platform * Suspension: Air * Total weight: 42,000 kg * Unladen weight: 6,770 kg * Payload: 35,230 kg * Permissible total weight: 42,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 100% - 100% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 100% - 100% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 100% - 100% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Manufacturer: Euromix Serin * Date of initial registration: 05/31/2024 * Hardox steel round body * Capacity approx. 24 m³ * Lift axle * Shuttle valve * Folding underrun protection * SAF axles and disc brakes * Full-load supports * Water tank * Toolbox * Hardox floor, 6 mm, walls 5 mm * Control panel * Year of manufacture: 2023 Nedpfsy T D Hzex Akuewg Disclaimer: Subject to changes, prior sale, and errors excepted. More photos and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained staff. We will be happy to advise you.

Condition: new, empty load weight: 6,770 kg, maximum load weight: 35,230 kg, overall weight: 42,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 385/65 22,5, tire condition: 100 %, color: blue, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, Reference no. for inquiries: 41006 Wielton, steel tipper * Year of manufacture: New * ABS, Anti-lock Braking System Nwodpfx Aey T D H Iokuog * EBS, electronic braking system * Lift axle * 2x7-pin connector * 15-pin connector * Lifting and lowering mechanism * Storage box/toolbox * Platform * Suspension: Air * Total weight: 42,000 kg * Unladen weight: 6,770 kg * Payload: 35,230 kg * Permissible total weight: 42,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 100% - 100% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 100% - 100% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 100% - 100% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Manufacturer: Euromix Serin * Date of first registration: 05/31/2024 * Hardox steel round body * Capacity approx. 24 m³ * Lift axle * Shuttle valve * Folding underrun protection * SAF axles and disc brakes * Full-load supports * Water tank * Toolbox * Hardox floor 6mm, walls 5mm * Control panel * Year of manufacture: 2023 Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates/customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading/cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 02/2003, suspension: air, tire size: 385/65R22.5, color: orange, Year of construction: 2003, Equipment: ABS, Axle configuration Tyre size: 385/65R22.5 Make axles: SAF Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Weights Empty weight: 3.175 kg Carrying capacity: 28.325 kg GVW: 31.500 kg Condition Technical condition: good Visual appearance: good Njdpfxjy Tanne Akuowg Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - Twist-locks

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Nwjdpfx Asy Tu Tfskujg Collets package

Condition: used, mileage: 324,372 km, power: 335 kW (455.47 HP), first registration: 11/2021, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2028, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, Internal vehicle number: MK200166 German vehicle Available immediately on our yard in Kaufungen - Kassel More information from Luis Lucena Price applies to tractor unit only! 4X4 permanent Retarder Leaf suspension front/rear Tipping hydraulics Sample financing: * Internal number: MK200166 * Purchase price: €59,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €938.18 * Residual value: €11,980.00 If you are interested in this offer or wish to have it tailored to your needs, please contact Mr. Enchev. We look forward to your call. Errors excepted. Nwodpjx Uvfljfx Akuog We are happy to accept your used vehicle as a trade-in. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 434,764 km, power: 338 kW (459.55 HP), first registration: 06/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, navigation system, * Sun visor * Mirror heating * Sunroof * Driver comfort seat * Seat heating Nsdpoy Tz I Aefx Akujwg * ABS * Steel bumper * High ground clearance * Cruise control * Radio * Electric windows * Fog lights * Transfer case * Off-road gear reduction * Off-road driving program * AP axles * Rotating beacon, orange * Air intake at the top * Air dryer * Electrically adjustable mirrors * Air horns * Hill start assist * Longitudinal and transverse differential locks * Navigation system * 12-speed * Suspension: leaf spring and air suspension * Payload: 9836 * Continuous braking: electrically controlled engine brake ----Special body: ----Body: Jost fifth wheel coupling Sale only to commercial customers. IN THE EVENT OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase agreements, invoices, proforma invoices, orders, and sales negotiations.

Condition: used, mileage: 434,764 km, power: 338 kW (459.55 HP), first registration: 06/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, navigation system, * Sun visor * Mirror heating * Sunroof * Driver's comfort seat * Seat heating * ABS * Steel bumper * High ground clearance * Cruise control * Radio * Power windows * Fog lights * Transfer case * Off-road gear reduction * Off-road driving program * All-wheel drive axles Nsdpfxsy Tz I No Akuewg * 360° warning light, orange * Air intake above * Air dryer * Power-adjustable mirrors * Air horns * Hill-start assist * Longitudinal and transverse locking differentials * Navigation system * 12-speed * Suspension: leaf spring/air suspension * Payload: 9836 * Continuous braking: electronically controlled engine brake ----Special superstructure: ----Superstructure: Jost fifth wheel coupling For sale to commercial customers only. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase agreements, invoices, proforma invoices, orders, and sales negotiations.

Condition: used, mileage: 289,754 km, power: 368 kW (500.34 HP), first registration: 01/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2024, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Cab insulation NORDIC Low noise certification for Austria and L-plate No COP document Environmental badge for Austria available Multi-function steering wheel adjustable in height and tilt, MAN BrakeMatic, ESS, EBA2, ASR, ACC, air-suspended cab mounting, heated and electrically adjustable wide-angle and kerb mirrors, passenger-side rear-view mirror with electric maneuvering aid, LED daytime running lights, MAN Media Truck Advanced radio 12V with 7" color display and navigation preparation + Navi SD Fifth wheel JOST JSK 42, installation height 150mm with integrated lubrication, fifth wheel lead 585mm, fifth wheel plate 40mm Nwodpfx Aksx Epnheujg

Condition: used, mileage: 933,346 km, power: 368 kW (500.34 HP), first registration: 01/2018, fuel type: diesel, empty load weight: 8,638 kg, maximum load weight: 10,362 kg, overall weight: 19,000 kg, axle configuration: 4x2, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 1, Year of construction: 2017, operating hours: 933,346 h, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, hydraulics, navigation system, onboard computer, parking heater, sliding door, spoiler, truck registration, Vehicle number for inquiries: 41188 Scania, R 500 * Year of manufacture: 2017 * ABS, Anti-lock Braking System Nedpfx Asy S Rbvekujwg * EBS, electronic brake system * Power windows * Cab * Automatic climate control * Refrigerator * Leather interior * Alloy wheels * Air suspension * Navigation system * Retarder / ZF-Intarder * Power steering * Sleeper cab * Heated seats * Auxiliary heater * Cruise control * Full spoiler * Tilting hydraulics * On-board computer * Differential lock * Digital tachograph * Bluetooth * USB interface * OBU preparation * Refrigerator * Electric windows and mirrors * AdBlue tank * Roof spoiler * Fog lights * Comfort suspension seat * Multifunctional steering wheel * Sun visor * Transmission type: Automatic * Suspension: Leaf / Air * Gross vehicle weight: 19,000 kg * Unladen weight: 8,638 kg * Payload: 10,362 kg * Permissible gross vehicle weight: 19,000 kg * 2-circuit hydraulics * Tilting valve * Navigation system * DAB radio * Headlamp bar Disclaimer: Subject to change, prior sale and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transportation of commercial vehicles Please ask our trained specialist staff, we will be happy to advise you.

Condition: used, mileage: 658,474 km, power: 368 kW (500.34 HP), first registration: 03/2019, fuel type: diesel, empty load weight: 7,907 kg, maximum load weight: 11,093 kg, overall weight: 19,000 kg, tire size: 315/70 22,5, tire condition: 60 %, axle configuration: 4x2, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of beds: 1, Year of construction: 2019, operating hours: 658,474 h, front tire size: 315/70 22,5, rear tire size: 315/70 22,5, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, hydraulics, navigation system, onboard computer, parking heater, sliding door, spoiler, truck registration, Reference number for inquiries: 41187 Scania, R 500 * Year of manufacture: 2019 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Power windows * Cabin * Automatic climate control * Leather interior * Alloy wheels * Full air suspension * Navigation system * Retarder / ZF Intarder * Power steering * Sleeping berth * Seat heating * Auxiliary heater (independent vehicle heater) * Cruise control * Tipping hydraulics * On-board computer * Differential lock * Digital tachograph * CB radio * Bluetooth * USB interface * OBU (On-board unit) preparation * Refrigerator * Electric windows and mirrors * AdBlue tank * Roof spoiler * Fog lights * Comfort suspension seat * Multifunction steering wheel * Sun visor * Transmission type: Automatic Nwsdpfx Asy Dn N Iekuog * Suspension: Air/Air * Gross vehicle weight: 19,000 kg * Unladen weight: 7,907 kg * Payload: 11,093 kg * Perm. gross vehicle weight: 19,000 kg * Tire condition, 1st axle: 70% -- 80% - Tire size: 315/70 R22.5 * Tire condition, 2nd axle: 60% | 60% -- 50% | 50% - Tire size: 315/70 R22.5 * Tire sizes: 315/70 R22.5 * Full air suspension * Dual-circuit hydraulics * Tipping valve * DAB radio Liability disclaimer: Specifications, subject to change, prior sale and errors excepted. More photos and videos available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing options * Handling of all (export) documents * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our qualified staff – we are happy to advise you.

Condition: good (used), amount 1 STK Heckert Lynette / Safety guard suitable for Heckert machines Nedpfxsy Ty Alj Akuowg

Condition: used, mileage: 430,822 km, power: 331 kW (450.03 HP), first registration: 12/2020, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2028, color: yellow, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, all wheel drive, Internal Vehicle No.: G400171 Available immediately at our yard in Kaufungen - Kassel. More information: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) 16 units available Years: 2020 & 2021 Mileage: 302,000 km to 408,000 km 16 vehicles available Year of manufacture: 2020 & 2021 Mileage: 302,000 km to 408,000 km 03.12.2020 YS2G4X40005606169 4x4 377,585 07.12.2020 YS2G4X40005606365 4x4 348,389 Nsdpfsy Trp Rjx Akuswg 07.12.2020 YS2G4X40005606348 4x4 302,800 07.12.2020 YS2G4X40005606584 4x4 343,862 03.12.2020 YS2G4X40005606255 4x4 408,008 07.12.2020 YS2G4X40005606440 4x4 378,609 07.12.2020 YS2G4X40005606413 4x4 354,302 07.12.2020 YS2G4X40005606452 4x4 387,469 07.12.2020 YS2G4X40005606408 4x4 340,793 03.12.2020 YS2G4X40005606276 4x4 319,700 03.05.2021 YS2G4X40005624233 4x4 351,327 03.05.2021 YS2G4X40005624498 4x4 314,612 03.05.2021 YS2G4X40005624047 4x4 350,000 03.05.2021 YS2G4X40005624143 4x4 345,983 03.05.2021 YS2G4X40005624599 4x4 344,498 03.05.2021 YS2G4X40005624462 4x4 326,043 Approximate saddle height: 1350 mm Engine brake: 2-stage Metal cab 1x comfort seat 1x bunk Leaf spring, air-suspended Heated seats Electric mirrors Heated mirrors Electric windows (left) Electric windows (right) Air conditioning Sun visor Cruise control Auxiliary heater Air horn Opticruise ABS (Anti-lock Braking System) Traction control (ASR) Auxiliary drive Tilt hydraulics Differential lock Fog lights Roof beacon Leaf spring suspension Aluminum tank Sunroof Green environmental badge Tire size: 385/65R22.5 Tire size: 315/80R22.5 Payload: 9250 kg Transmission: GRS0905, Opticruise, Ecocruise, transmission oil cooler, ABS and ASR, drum brakes on front and rear axles, heavy-duty front stabilizer, LED daytime running lights, CG cab, air-to-air auxiliary heater 2 kW, heated premium driver's seat, 1x bunk, fuel tank capacity: 400 liters, auxiliary drive EG652P. Financing example: * Internal number: G400148 * Purchase price: 58,900.00 € * Down payment: 10% * Term: 60 * Monthly payment: 920.02 € Residual value: 11,380.00 € If you are interested in this offer or would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to hearing from you. Errors and omissions excepted. We will gladly accept your used vehicle in trade. Financing directly with us is possible. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 468,426 km, power: 345 kW (469.07 HP), first registration: 03/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, * Sun visor * ABS * TCS Traction Control System * ESP * Distance Control Cruise Control * Active Brake Assist * Lane Keeping Assist * Turning Assist (right) * Radio * On-board computer * Stationary air conditioning * Stationary heater * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Mirror heating * Central locking * Fog lights * Electric pop-up roof Nodpfxey T Di Ae Akuswg * Driver comfort seat * Seat heating * Cooler box * Differential lock, rear axle * All-round warning light, orange * Air intake, top * Roof spoiler * Side spoiler * Alloy wheels * 12-speed * Suspension: leaf spring/air * Payload: 10697 * Continuous brake: automatically controlled auxiliary brake (VEB), 3 levels + auto mode ----Superstructure: Saddle plate Sale only to business customers. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales discussions.

Condition: used, empty load weight: 6,570 kg, maximum load weight: 29,430 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2010, total length: 13,860 mm, suspension: air, tire size: 385/65R22,5, color: silver, Year of construction: 2008, gearing type: mechanical, 3-axle sliding tarp semi-trailer, container doors, lift axle, pallet securing bars on the left and right, pallet box, Edscha sliding cover, load securing certificate, DC9.5+. Beverage offers are non-binding and subject to change; we reserve the right to sell the vehicle in the meantime. Sale is based on our general terms and conditions for the sale of used vehicles, excluding any warranty. Location: Depot D-66540 Neunkirchen/Saar – industrial area, Friedrichsthalerstr. 25. Please arrange an appointment in advance for viewing. For further information on the vehicle offered, please request a detailed offer. Inquire about our favorable hire-purchase, leasing, or full-service rental offers. Our general terms and conditions apply. Subject to prior sale. Financial services offers are subject to a positive credit check and are only valid for GERMAN commercial enterprises. Further information can also be found under: BPW axles, container doors, disc brakes, lift axle, sliding tarps, pallet box, sliding cover, wooden floor, EBS, German version, new TÜV/emission test. Nwodpfxjwmr Ero Akusg

Condition: excellent (used), CATALOG NUMBER 7679 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height, double-sided: 200 mm - Electrically adjustable table height (up/down) - Maximum planing height, four-sided: 100 mm Top section: - Driven infeed shaft, toothed - Kickback devices - Pressure unit - 2 driven shafts, toothed - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Outfeed driven shaft, smooth Bottom section: - Guide bar - Driven roller, toothed - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth driven rollers Rear section: - 2 side spindles with pressure unit 1) Right vertical, 100 mm, 4 kW 2) Left vertical, 100 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable vertically and horizontally - Manual planing width adjustment - 6 feed rates: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Dimensions (L/W/H): 2500 x 1800 x 600 mm - Weight: approx. 3000 kg FEATURES - Perfect for log, flooring, and similar applications - Manufactured by German brand KUPFERMUHLE - 2 horizontal planing shafts + 2 vertical spindles - Used planer, in very good condition Net price: 56,900 PLN Net price: 13,550 EUR (based on an exchange rate of 4.2 EUR) Nwedpey T Rhxsfx Akueg (Prices may vary with exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2018, clamping force: 1,900 kN, screw diameter: 45 mm, total width: 1,570 mm, total height: 2,180 mm, overall weight: 8,900 kg, product length (max.): 5,970 mm, This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR ZERES ZE1900 electrical injection moulding machine. Contact us for more information. Additional equipment • Air valves: 2 Machine Benefits Technical Machine Benefits • Screw Type: A / B / C • Screw Diameter: 40 mm (A) / 45 mm (B) / 50 mm (C) • Screw L/D Ratio: 22.5 (A) / 20 (B) / 18 (C) • Injection Distance: 201 mm • Calculated Injection Volume: 252 cm³ (A) / 319 cm³ (B) / 395 cm³ (C) • Injection Capacity (PS): 229 g (A) / 290 g (B) / 358 g (C) • Injection Speed: 160 (250)* mm/s • Injection Pressure: 253 Mpa / 2580 Kgf/cm² (A) | 200 Mpa / 2040 Kgf/cm² (B) | 162 Mpa / 1650 Kgf/cm² (C) Njdpfx Aex D H Nqekuowg • Holding Pressure: 202 Mpa / 2060 Kgf/cm² (A) | 160 Mpa / 1630 Kgf/cm² (B) | 130 Mpa / 1320 Kgf/cm² (C) • Screw Speed: 350 RPM • Nozzle Touch Force: 39.2 {4.0} KN{tf} • Nozzle In Size: 50 mm • Heating Input Power: 14.2 KW • Minimal Mould Size H*V: 370*335 mm • Ejector Stroke: 130 mm • Ejector Force: 44.1 {4.5} KN{tf} • Hopper Capacity: 25 L • Platen size: 840 x 790 mm • Distance between uprights: 570 x 520 mm • Installation height: 200 to 550 mm • Opening width: 470 mm • Max ejector stroke: 130 mm / max ejector bar length: 320 mm • Ejector coupling type: central haitian standard Ø 32mm / m16 • Centering ring: 160 mm / cascade control: 4-fold / core pulls bwap: 2 • Hot runner control units: external • Without handling Dimensions Machine Depth 5980 mm

Condition: new, For sale: high-quality industrial heating element (heizstab) by HTT energy GmbH. Condition: New, unused, stored in warehouse (may have minimal storage marks). 🔧 Technical specifications: Manufacturer: HTT energy GmbH Article number: 20178 Order number: 7122-001 Njdpfx Akoyx I Rzouswg Power: 50 kW Voltage: 400V (3-phase), 50-60 Hz Current: 72.2 A Protection rating: IP65 Max pressure: 10 bar Temperature range: 5 - 350°C Year of production: 2021 📏 Construction: flange heater multi-tube design junction box with terminals 💡 Application: heating water, oil, and other liquids industrial tanks technology installations heating systems 📦 Included: Exactly what is shown in the photos

Condition: used, Year of construction: 2023, HERBOLD zigzag classifier (gravity classifier) Type SZS 630/175 Sifting channel 630 mm wide With blower 7.5 kw Material: mild steel Condition: unused Year of construction 2023 Nwodey Timyjpfx Akujg

Condition: excellent (used), Professional TITE-LOCK MILLING CHUCK with SK40 – CT20A mounting – 90 mm. The high-quality quick-clamping TITE-LOCK system ensures exceptional clamping force and working precision, ideal for milling, drilling, and precision machining. . Type: TITE-LOCK MILLING CHUCK . Mounting: SK40 – CT20A . Length: 90 mm . Applications: milling, drilling, CNC machining . Condition: used, fully operational, very good technical condition ✅ Robust and precise industrial tool for professional use on milling machines and machining centers. Excellent rigidity and high tool holding force. Nwedjxk T H Ajpfx Akujg