Used Sackabfüllungs Maschine Spezial for sale (1,448)

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-3A, The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the carton are closed first, only then is the carton glued. Carton formats: Length 150 - 600 mm Width: 115 - 490 mm Height: 110 - 510 mm Technical data: Length 1,800 mm Rsdpfxozaaavo Ammsu Width 880 mm Weight 300 kg Operating voltage 220 V Air 5 kg/cm2 CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-1A, The VOGEL MH-FJ-1A carton sealing machine has a side drive belt system and an additional drive belt in the upper section of the machine. The advantage lies in the stability - high cartons cannot tip to the side. Carton formats: Length 150 - ∞ mm Width: 120 - 480 mm Height: 120 - 480 mm Technical data: Length 1,090 mm Rsdey U U T Ujpfx Ammou Width 1,050 mm Weight 200 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: TET031P5 - 2200320948, cooling capacity: 8.98 kW (12.21 HP), type of input current: three-phase, type of cooling: water, overall weight: 331 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 1.5 m³/h, pump pressure: 5 bar, total width: 660 mm, total length: 1,315 mm, total height: 1,373 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process air cooler/chiller/chilled water unit, air-cooled, Type: TAEevo Tech 031 P5-NF MTA S.p.A. TAEevo Tech 031 P5-NF are air-cooled, compact chilled water units suitable for outdoor installation (-5°C to +46°C). Includes crankcase heater, phase monitoring, 115-liter buffer tank, built-in P5 high-pressure pump, open expansion tank (14 liters), and evaporator in a NON-FERROUS design. Chilled water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 8.98 Chilled water temperature outlet/inlet (°C): 7 / 12 Volume flow (m³/h) 1.5 Available pump pressure (bar) 5 Ambient temperature (°C) 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phases Ph 3, Max. power consumption (kW) 6.6 Max. current (A) 12 Starting current (A) 47 Rjdpfewzk Egex Ammsu Protection class: IP54 Dimensions: Length (mm) 1315, Width (mm) 660, Height (mm) 1373, Weight (kg) 331 Connection Rp 1" Serial No.: 2200320948 Year of manufacture 2018 Condition: Visually 2, Technically OK Used Price: on request in Euro (plus VAT, ex Nettetal) – 3 months warranty Used machines may have visual defects due to their use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, working width: 1,350 mm, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 3,800 mm, total width: 2,000 mm, total height: 2,020 mm, overall weight: 3,400 kg, working height: 900 mm, input voltage: 400 V, warranty duration: 3 months, passage width: 1,350 mm, grinding width: 1,350 mm, height adjustment type: electric, Equipment: 1 contact roller unit, Ø 210 mm, rubberized 40 Shore, grooved Drive: 15 kW/87 Hz/29 A (11/19 kW motor) with frequency control / ECO-Drive, constant speed, with electric roller adjustment (SKF) and positioning prepared for the use of Scotch-Brite strips 1 sanding brush station with 3 vertical rotating units equipped with 2 horizontal rotating brushes each Tool: grit 150, No. 068087 Drive: 2.6 kW per unit Speed of the rotating units: 30-150 rpm, frequency-controlled. Cutting speed of the brushes: 5-20 m/sec, frequency-controlled. With electric height adjustment and positioning Rjdpjzav Dqofx Ammsu Installed options: Automatic workpiece thickness adjustment (AWDM), automatic tool length correction, machine interior lighting (LED version), stepless feed rate 0.5-10 m/min, conveyor belt cleaning brush, conveyor belt control, conveyor table in vacuum version, vacuum control with vacuum sensor Touch screen: 9" Siemens TP900 Comfort Year of manufacture: 2017 Weight [kg]: 3400 kg Previous owner: 1 Availability: Short-term, by arrangement Optionally, the matching piping and extraction system (total CE) are available for the machine.

Condition: used, functionality: fully functional, Complete valve grinding set for professional engine repair – packaged in three robust transport cases. Includes the actual valve grinding machine, a comprehensive set of valve seat cutters/reamers in various diameters, as well as collets and accessories (see photo – case opened). Ideal for engine repair shops, automotive specialists, boat engine/stationary engine service, classic car restoration, railway workshops, and industrial repair. The complete set is difficult to obtain individually and is therefore highly sought after. According to the equipment list (inventory no. 200004), the manufacturer is EFCO Maschinenbau GmbH, type Valval – please verify this on the nameplate on site. Test run/inspection possible at any time by appointment. Scope of delivery (3 transport cases): 1. Valve grinding machine (actual grinding unit) 2. Valve seat tools/cutter set 3. Collets, reamers, and accessories Technical data: Rodjzachvspfx Ammju - Power supply: 230 V (check on site) - Application: Valve grinding, valve seat machining, valve guide machining - Completeness: apparently complete according to the photo, please check against the original list on site Collection/transport: Self-collection by car/van (3 cases, each approx. 20-30 kg). Shipping via a freight forwarder is possible.

Condition: ready for operation (used), functionality: fully functional, Professional magnetic drill BDS MAB 525/SB – the German manufacturer BDS is the market leader for core drilling machines. The unit comes in a transport case, making it easy to transport to the construction site and for installation work. Suitable for steel construction, welders, shipbuilding, steel bridges, workshops – anywhere where large holes need to be drilled in thick steel plates. With magnetic base for secure attachment to steel beams, machine frames, and components. Includes cutting oil lubrication to protect the tool. Technical data: - Model: MAB 525/SB (BDS Machines) - Design: Magnetic drill with dovetail guide - Drive: 230 V / 50 Hz (see nameplate) - Drilling capacity: Core drill typically up to 35 mm / Twist drill up to 23 mm Rodpfezabwpox Ammou - Chuck: MK / quick-change, depending on the version - Magnetic holding force: > 10,000 N - Equipment: Transport case - Made in Germany Collection / transport: Shipping as a package is possible (in the original case) or collection in Stralsund.

Condition: used, functionality: fully functional, Robust universal milling machine from KNUTH, featuring the proven WF I design. A classic, German-made workshop machine with a milling head, horizontal milling arbour mounting, a heavy cross slide, and smoothly operating mechanics. Includes original tables and controls. Suitable for workshops, model making, training workshops, repair work, and fixture construction. Also ideal for ambitious private users and collectors of high-quality machine tools – the WF series is highly sought after and easy to operate. Technical specifications: - Model: WF I - Manufacturer: KNUTH Werkzeugmaschinen GmbH, D-Neumünster - Year of manufacture: 1991 - Power consumption: 3 kW - Voltage: 380 V / 3-phase / 50 Hz - Table: Cross slide with T-slots (verify dimensions on site) Redpfezabr Tjx Ammsu - Milling arbour: horizontally mountable - Tool holder: SK / MK (verify on site) - Serial number: 90020 - Weight: approx. 800-1200 kg Collection / Transport: Self-collection with forklift/crane. Loading on site is possible. Shipping via a low-loader can be arranged.

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Rodpfx Amsyxy S Rjmsu Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles and pipes Manufacturer: Hans Weber Maschinenfabrik GmbH Model: PS-2 Year of manufacture: 2002 Serial no.: PS 2 104 Technical specifications: Rodpfx Aey Ulhiemmeu Profile dimensions: Width: 200 mm Height: 100 mm Pipe diameter: max. 100 mm Shortest cutting cycle: approx. 6 sec. Carriage travel: max. 400 mm Cutting speed: approx. 60 m/sec. Clamping force: up to 1100 N (adjustable) Saw blade diameter: 400 mm Dimensions: 1830 x 1000 x 1600 mm (LxWxH) Weight: approx. 500 kg Condition: used, as seen Accessories: New maintenance unit for compressed air New incremental encoder, incl. measuring wheel and connection cable for length measurement Note: The saw was in use at an education and research centre and therefore has very few operating hours.

Condition: excellent (used), functionality: fully functional, Slow-speed shredder Cutting width – 150 mm Motor power – 2.2 kW Rotor speed 200 rpm Number of rotor knives – 9 pcs Number of stator knives – 2 pcs Redpfxsyf I N As Ammeu 6 units available, in perfect condition Throughput up to 25 kg/h Price 1,000 EUR per unit

Condition: used, 1520mm x 6.5mm x 25 TON PEKRUN MASCHINENFABRIK LOOPING PIT SLITTING LINE Manufacturer: Pekrun Maschinenfabrik Coil entry width: 360 - 1520mm Coil ID: 500 - 750mm Coil OD: 1990mm Material thickness: 1 - 6.5mm Maximum coil weight: 25ton Slitting shaft OD: 260mm Line speed: 110m/min Includes: Siemens S7 PLC system Kurschat laser thickness measurement system Tilgert Edge guides Scrap choppers with automated adjustment BKM crop shear Snubber rolls Seperation roll arm Pit Coil cars 2 - Arm Turnstyle Rjdpfx Aezafccommju Large amount of tools

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: LDN0231008630, load capacity: 230 kg, lifting height: 6,000 mm, empty load weight: 1,710 kg, fuel type: electric, drive condition: 100 %, maximum load weight: 230 kg, operation weight: 1,710 kg, chain condition: 100 %, 0 Crawler work platform Crawler work platform CAPRI 06-08 We offer you; Crawler work platform Cabri 06-08 New machine Working height 8 meters Platform height 6 meters Machine dimensions: Machine length: 2067mm Width machine: 1030mm Machine height 2183mm Height platform folded 1832mm Length platform (retracted) 1859mm Length platform (extended) 2759mm Platform extension: 900mm Platform dimensions: 1859x810x1130m0 Load capacity: 230kg Load capacity platform extension: 113kg Turning circle machine: 0 meter Drive motor 24V/ Batteries 4xDC 24 V Charger integrated 24V/15 A Machine weight 1710kg Advantage Cabri platforms: ECU & control unit from brand manufacturer installed Improved batteries installed Fully electric operation Immisson free working stronger crawler chassis non-marking tracks Robust construction The machine weight is distributed over a large area by the light caterpillar drive chains, which reduces the ground pressure. As a result, it is ideally suited for indoor use on sensitive floors with low load-bearing capacity. Non-marking tracks that leave no traces All-terrain tracked platform, up to 25% incline Ground obstacles can be overcome Also suitable for working on uneven ground Excellent traction reinforces grip on the ground Extremely maneuverable in confined spaces Low maintenance and servicing costs thanks to AC technology This advertisement does not constitute a binding offer, it is for illustrative purposes only. All information is given in good faith. Errors, typing errors and prior sale reserved You will receive an invoice with VAT shown. Shipping is possible for an extra charge. With kind regards Croyk77br3 Steffen Küster Rsdpfsrig Ddsx Ammju K. u. K. Maschinen GmbH Old airfield 30 49377 Vechta Registered office of the company: Vechta AG OL HRB 216489 Managing directors: Steffen Küster/ Lukas Kempf

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, overall weight: 790 kg, empty load weight: 790 kg, fuel type: electric, tire condition: 100 %, drive condition: 100 %, maximum load weight: 230 kg, operation weight: 790 kg, chain condition: 100 %, Equipment: UVV, rubber tracks, Crawler work platform Tracked work platform CAPRI 04-06 We offer you; Crawler work platform Cabri 04-06 New machine Working height 6.5 meters Platform height 4.5 meters Machine dimensions: Machine length: 1380mm Width machine: 790mm Machine height 2110mm Height platform folded 1715mm Length platform (retracted) 1340mm Length platform (extended) 2759mm Platform extension: 595mm Platform dimensions: 1340x750x1115m Load capacity: 230kg Load capacity platform extension: 100kg Turning circle machine: 0 meter Drive motor 24V/0,8KW Batteries 2xDC 24 V Charger integrated 24V/15 A Machine weight 790kg Advantage Cabri platforms: ECU & control unit from brand manufacturer installed Improved batteries installed Fully electric operation Immisson free working stronger crawler chassis Rsderhwv Rjpfx Ammsu non-marking tracks Robust construction The machine weight is distributed over a large area by the light caterpillar drive chains, which reduces the ground pressure. As a result, it is ideally suited for indoor use on sensitive floors with low load-bearing capacity. Non-marking tracks that leave no traces All-terrain tracked platform, up to 25% incline Ground obstacles can be overcome Also suitable for working on uneven ground Excellent traction reinforces grip on the ground Extremely maneuverable in confined spaces Low maintenance and servicing costs thanks to AC technology This advertisement does not constitute a binding offer, it is for illustrative purposes only. All information is given in good faith. Errors, typing errors and prior sale reserved You will receive an invoice with VAT shown. Shipping is possible for an extra charge. With kind regards Steffen Küster K. u. K. Maschinen GmbH Alter Flugplatz 30 49377 Vechta Registered office of the company: Vechta AG OL HRB 216489 Managing directors: Steffen Küster/ Lukas Kempf

Condition: good (used), Out of production • Type: XSM945P • Serial number: 20110702 • Glass thickness: 3 – 25 mm • 9 spindles • Minimum glass dimensions: 80 x 80 mm • Year of manufacture: 2011 Rsdpfxsq Abyvj Ammeu • Available videos: • Power requirements: 400V, 50Hz, 40A, 20kW • Special price: €4,000

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° Rsdpfx Amju Nc Rismeu feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: used, Year of construction: 1977, Technical details: honing diameter: 125 mm stroke: 500 mm throat: - mm distance table - lower edge spindle: 525 mm grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm Rodpfx Amjw Rv Tajmeu table surface area: 500 x 1000 cm total power requirement: 4,22 kW Weight approx.: 0,15 t dimension machine xH: 1,30 x 1,20 x 2,70 m There is a movable table that moves lengthwise and crosswise. ·There is a movable table that travels in both longitudinal and transverse directions. ·Manual lubrication with cooling. ·The machine is capable of honing. ·Pendulum movement in rapid traverse between two adjustable end positions is possible. *

Condition: used, Year of construction: 1999, Technical details: x-travel: 690 mm y-travel: 400 mm z-travel: 550 mm B-axis (table): 360° mm control: Siemens 840 D number of spindle speeds: max. 15 000 U/min tool clamping: System nach DIN 69893 tool taper: HSK-A63 tool changer magazine: chain magazine: 12 places Stück traversing speed: x/y/z Axis: 40 total power requirement: 195 kW weight of the machine ca.: 13,0 t Rodeu Idl Sspfx Ammsu Traveling Column Milling Machine - the tool changing unit consist of 3 -NC axis and 1 NC- rotary table axis - ATC ( with magazine) - rotary table Type SKH-NC 4/029, diameter=460mm , table surface plate Ø 500 x20mm, revolution per minute max. 22 rpm - control panel SIEMENS - Spindel-Typ: DRF-WE-255-N-W-15-30, 15000 U/min., Spindelleistung = 30 kW - chip conveyor Make Knoll type 400K-3/280, ejection height 1150mm - cooling system for spindle make SCHIMBKE Type DK 80V, 3,36 kW i.D. *

Condition: used, Year of construction: 1978, Technical details: Redpfxju Ndhio Ammou table surface area: 1970 x 400 mm distance between table/spindle: min./max. 150 / 250 mm rapid traverse: 1 / 2 m/min revolution per minute: Frässpindel: 112 ... 1400 / 12 step U/min milling spindle taper: DIN 2019 = Nr. 40 (SK40) axial adjustment: manuell = 150 mm quill feed: 0,012 / 0,025 / 0,05 mm/U feed range - horizontal: Frässchlitten: 8...100 / 12 step mm/min total power requirement: ca. 8,4 (10,5 kVA) kW machine weight approx.: 3000 kg dimension machine xH: 3,05 x 2,7 x 2,0 m wedge-groove milling machine Application: Milling of straight and helical grooves. Multiple groove milling with automatic program sequence. Further features: - distance spindle axis / lower edge counterholder: 55 mm - axial movement of the counter bearing sleeve 50 mm - milling carriage movement horizontal 1000 mm (automatic + manual by hand) and vertical 100 mm by hand + max. 5mm automatic/hydraulic Equipment: - chip container 470x300x300mm - 2x oil collecting basins (3200x1500x70 and 3200x800x60mm) - some accessories/tools *

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) Rsdpfx Asu Ibuwommsu -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t Redpfxju Nftte Ammju control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: used, Technical details: Redpfx Aou Nfrcommju shaft length: max. 30 mm capacity: 600 ST/min wire diameter max.: 5 mm working dimensions: 30 mm dimensions electric cabinet LxWxH: 1,45x0,55x2,1 m dimensions of machine: 2,95x1,5x2,15 m dimensions of coil: 1,15x1,15x1,15 m Orbital Cold Forming Machine! - Not not suitable for screw production!!!!! - mechanic cold flow press / machine is unused!!!! - Steel core bullets - Rivets (almost all types: flat rivets, punch rivets, precision rivets, flat head rivets, etc. -----à not for manufacturing semi-hollow rivets, because you will need 2 forming stages, model KEPK - 1 however only has 1 forming stage. - bolts - Pins, chain pins (short) - Lead sheath-weighting for bullets (with straight frames front and rear) - plant like new / never used! accessories: - coil, manual Machine can be demonstrated under power. Please send us your enquiry what you are going to manufacture with that machine. You can also send us a drawing in order to check it if it is possible. *

Condition: used, Technical details: weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,8 x 0,9 m Machine table with 5 indexing tables for multi-side machining Rjdju N D S Ujpfx Ammou Application: Multi-side machining of workpieces in circular transfer machines in one operation on 5 indexing tables with clamping devices. Design: Round, fixed body with 5 round tact tables, which are arranged in the shape of a pentagon, and a centrally mounted turntable. Description: Turntable center = type Pentagon, diagonal 830mm; swing diameter Ø 873mm, side length 513mm 5x rotary indexing table, as a regular pentagon on machine body, center circle Ø = 1280mm, table shape truncated square 380x380mm, clamping device via 4 pieces make Röhm truncated cone clamping devices and 1 central centering flange, 360 ° rotatable, workpiece Ø approx. 730mm Actuation / drive is hydraulic *

Year of construction: 1984, condition: used, Technical details: material Ø max: 120 mm suitable for: Laborarbeiten feed:: Stufe 1: 0,05 Doppelhub mm feed:: Stufe 2: 0,1 Doppelhub mm air pressure - required: 5 - 6 bar Number of working hours: 2649 h connected load: 5 kVA machine length: 1200 mm machine width: 800 mm Redpfju Ng Sdjx Ammsu machine height: 1900 mm machine weight: ca. 850 kg Laboratory Test Grinding Machine - precision grinding machine for laboratory work (e.g., steel and ice samples for spectral analysis) - automatic grinding machine with electronic control (in electric cabinet) - automatic feeding of the grinding spindle - workpiece holder = electro-magnetic - 380V; 50Hz; 3 phases - pot grinding wheel Ø 200x 100mm and drill hole Ø 51mm - coolant device available *

Condition: used, 50 pieces used Rsdpfxey Ulx Ue Ammju SK 40 holders

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, We are selling this machine as we no longer have any use for it. Price is VHB we need the space. English version below: Rodpfxetgxyqo Ammsu We sell this machine because we don't use it anymore and we need the space. The price is open to discuss.