Used Saddle Stitcher for sale (539)

Condition: ready for operation (used), Numeriek gestuurd Japanse elektronica werkt betrouwbaar, 720 mm snijbreedte, zeer stabiel en zwaar gebouwd (1400 kg), kogelomloop spindel voor spelingsvrij instellen van het zadel. Manual en extra mes ingegrepen. Prijs “as is” geladen op uw transport, excl. eventuele gecertificeerde verpakkingskosten. Gedpjw R En Hsfx Almsbl

Year of construction: 2025, condition: new, Dosing system Rad-Mobil Rowing device RD 1000 MOutput power up to 700 to / hDosing control up to 900 recipes1 x 4-fold rowing box 700 to hourly output at 4 chambers.Mixing plant for RC and aggregate for the production of mixed linessuch as antifreeze, gravel base course, factory mixed concrete aggregate, screed sand 2-8,Drainage filter layers, base courses for railway construction, recycling lines withAutomatic control for fast truck direct loading from the driver. Gbodpfx Alsdvm Agsmol

Condition: excellent (used), Year of construction: 2000, picture frame stapler. Pneumatic control, efficient device. TYPE minigraf 44, Alfamachine company Gjdsvtzp Ujpfx Almobl

Condition: new, - External dimensions (LxWxH): 450x896x732 mm - Operating range: +5 ÷ -2°C - Evaporation temperature: -10°C - Condensing temperature: +40°C - Ambient temperature: 32°C - Defrosting: Hot gas - Power supply: 230 V / 1+N phase / 50 Hz - Maximum absorbed current: 6.6 A - Maximum absorbed power: 1.2 kW - Nominal absorbed power: 73 W - Refrigerant gas: R452A - Capacity: 1032 W - Nominal power: 0.5 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø254 mm - Airflow rate: 750 m³/h - Air throw: 3 m - Weight: 45 kg - Volume: 0.49 m³ - Hermetic compressor - Air-cooled condenser - Galvanized steel housing - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (only for BT models) - Ambient temperature probe - Defrost end probe - Condensing control probe - Power cable for door heater - Micro-door connection cable - Digital display with temperature indication - Operating status display: - Cooling/Defrost Ibodjxvr T Ejcvyqi Aod - Evaporator fans - Alarm active Gbedpoxvr T Eefx Almel - Manual defrost button - Audible alarm - High and low temperature alarm - High condenser temperature (dirty condenser) alarm - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - Defrost time exceeded alarm - Faulty temperature probe alarm - Condensing control probe failure alarm - Evaporation temperature at -10°C for MT - Condensing temperature at +40°C for MT - Evaporation temperature at -30°C for LT - Condensing temperature at +40°C for LT

Year of construction: 1997, condition: ready for operation (used), Müller Martini cover feeder 1528, year of manufacture 1997 Gsdowvmqbopfx Almsbl

Year of construction: 2007, condition: ready for operation (used), Saddle stitcher Heidelberg flat pile feeder DHU 450 Gbsdpfxexw Irys Almjl

Year of construction: 1997, condition: ready for operation (used), Müller Martini flat pile feeder 370, year of manufacture 1997 Gedpfx Aewvmp Rslmjbl 6x

Year of construction: 2017, condition: ready for operation (used), Saddle stitcher Hohner horizontal flat pile feeder (solo) for HSB 9000 Gbjdpfx Alolucypemjl

Year of construction: 1997, condition: ready for operation (used), Müller Martini complete control cabinet, year of manufacture 1997 Gbjdpfx Ajwvmp Delmsl

Condition: good (used), Year of construction: 2006, functionality: fully functional, 6 x vertical feeders 2 x horizontal feeders Gsdexbpk Eopfx Almobl 2 x bypass feeders Stitching station Trimmer Cross stacker CHA. FJ.DKSA-0000058, year 2006

Condition: ready for operation (used), Year of construction: 1999, operating hours: 16,780 h, functionality: fully functional, machine/vehicle number: MMZO 175 132, product width (max.): 480 mm, product height (min.): 115 mm, product height (max.): 320 mm, product width (min.): 110 mm, TECHNICAL DETAILS Maximum size: 480 x 320 mm Minimum size: 110 x 115 mm Control PLC control: for setup and operating parameters Construction Feeder: 6 x type 1555 Cover feeder: 1x type 1529 Stapling block: Bravo with 4 heads type HK75 and 4 heads type HK45 Slant control: available Stapling control: available Spine thickness measurement: available Trimmer: type 361 with center cut device Gbedsvvmlajpfx Almel Belt delivery: available Stacker: type CS 14 Performance Speed: 11,000 pieces per hour Operating hours Counter reading: 16,780 h EQUIPMENT - 6 feeders type 1555 - 1 cover feeder type 1529 - Bravo stapling block with heads type HK75 and HK45 - Inclination controller and stitching controller - Spine thickness measurement and trimmer type 361 - Belt delivery and stacker type CS 14 - Compressors - Manuals - Accessories

Condition: used, travel 150 mm slide width 75 mm Gedsvimvfspfx Almebl height 32 mm threaded spindle M8 x 1 with cross crank and scale graduation 0.1 mm capacity approx. 1.5 kg space requirements length - 380 mm x width - 75 mm x height - 32 mm weight approx. 3.6 kg - price per unit -

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (min.): 90 g/m², paper weight (max.): 300 g/m², control type: PLC-controlled, No minimum price – guaranteed sale to the highest bidder! Submission of a bid obligates the buyer to collect the item by 17.10.2025! As the machine is floor-level, removal is straightforward. TECHNICAL DETAILS Output: 1,500 to 9,000 cycles/h Formats Feeder untrimmed: 92 x 128 mm to 311 x 355 mm Final fold: 5 to 25 mm Pre-fold: 8 to 16 mm Gbsdpfx Alexb Dvcsmol Cover feeder unfolded: 160 x 128 mm to 622 x 355 mm Cover feeder folded: 89 x 128 mm to 311 x 355 mm Paper weight: 90 to 300 g/m² Trimmer 3-side trim: max. 50 mm 3-knife trim untrimmed: 89 x 120 mm to 305 x 349 mm, max. thickness 10 mm Production range: up to oversize A4 format EQUIPMENT Patented register stop belt for gentle material handling PLC control system 3x Double vertical feeders (DVA) 2 feeder stations on one shaft Modular design for processing with suction or gripper opening Miss-sheet detection on delivery blade Cover feeder UFA HS400 control cabinet Vacuum pump for DVA/UFA DVE Vacuum pump VE Wire spool device DAS20 Transfer mark table Shingled delivery SA Manual single-sheet feeder Staple monitoring from below 2x loop stitching heads: 52-L6 Stapling machine HM100 Universal end stop Miss-sheet collection tray

Condition: good (used), Year of construction: 2006, Horizon Stichliner SL5500: Gathering towers VAC 60a+m+m+m ST40, Horizon ASF 30, SPF 30 Trimmer HTC 30 Counter reading only 14.2 million Gjdpfevmfxgox Almjbl

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 311190, No minimum price - guaranteed sale to the highest bidder! MACHINE DETAILS Number of stations: 4 EQUIPMENT Cover sheet feeder Gbjdpfxjxpxdqs Almol Delivery unit

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, product width (max.): 356 mm, product height (min.): 210 mm, product height (max.): 610 mm, product width (min.): 120 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Production speed: up to 4,500 booklets/h Format range Open format – min.: 120 × 210 mm Open format – max.: 356 × 610 mm Finished format – min.: 75 × 120 mm Finished format – max.: 305 × 356 mm Gsdpfxjwwq Ele Almobl Paper processing Paper weights: 52–300 g/m² Feed capacity per station: 65 mm MACHINE DETAILS Application range: collating, creasing, folding, stapling, and trimming Dimensions & Weight Dimensions: 4,009 × 3,252 × 1,972 mm Weight: 2,111 kg Piece counter: approx. 7.5 million pieces Power supply Voltage: 230 V Frequency: 50 Hz Current consumption: 5.3 A Power consumption: 980 W EQUIPMENT - Two DSC 10 collating towers with a total of 20 stations - DBMS-F2 creasing and folding unit - DBMS-S stitching unit with two Hohner stitching heads - DBMS-T front trimmer - DKT-200 head and foot trimming unit - Production of a wide range of booklet sizes and thicknesses possible

Condition: ready for operation (used), Year of construction: 2001, operating hours: 19,430 h, functionality: fully functional, machine/vehicle number: MMZO 531 524, product height (max.): 5 mm, product length (max.): 480 mm, product width (max.): 320 mm, production capacity: 14,000 unit/h, The electronics and EPS were renewed in 2018! The machine is equipped as follows: - 1 x UG feeder - 9 x rotary feeders - 1 x card gluer TECHNICAL DETAILS Format (maximum): 480 x 320 mm Gbedpfxjxn R U Ee Almol Format (minimum): 153 x 108 mm Product thickness: 3 – 5 mm Performance Maximum mechanical speed: 14,000 cycles/h Production speed Post-fold: max. 14,000 units/h Pre-fold: max. 9,000 units/h Suction opening: max. 12,000 units/h MACHINE DETAILS Operating hours: 19,430 h Note: The positions 6 & 22 indicated in the legend are no longer for sale. The legend can be found in the attached machine layout.

Condition: good (used), Year of construction: 2006, functionality: fully functional, StitchLiner5500 - saddle-stitching system which flat sheet collating, scoring, folding, stitching and three-knife trimming in line. Gbedsvzgy Uepfx Almsl Line with: 2 Collator tower VAC 100 – (total 20 bins). Stacker/By-pass Unit: ST-40 Conveyor ST-CV Accumulator/Folder : ACF-30 Saddle-stitcher: SPF-30 Three-knife Trimmer: HTS-30 Options: 4 Stitching Head Center-Cut Device Additional Loop Stitching Kit Available Immediately - Can be inspect in production

Condition: excellent (used), Duplo iSaddle Digital bookletmaker DSF-2200 Sheet Feeder DBMS-F2 DBMS-S DBMS-T Gedpfex U Tkrsx Almebl DKT-200 DKT-LS Spinemaster

Condition: excellent (used), Computer control capability 2xDSC - 10/60i DBMi Saddle System Automatic collection, stitching, and folding of brochures iSaddle System – precise spine-line stitching Compatible with various types of feeders (Duplo DSC, DBM, etc.) High accuracy and finishing quality Gjdpfx Aloxtxgyjmjbl Quick format changeover Ideal for the production of brochures, catalogues, and magazines in digital or offset printing

Condition: used, Year of construction: 2014, Horizon TBC-200L Gbodpfxsy R Rk Uo Almjl

Condition: used, Year of construction: 2005, Horizon StitchLiner SL-5500 The Horizon StitchLiner 5500 is a powerful all-in-one solution for booklet production. Creasing, folding, stitching, and three-knife trimming in a single, efficient process. With its user-friendly operation, high productivity, and versatility, this system offers numerous benefits for print shops, binders, and on-demand printing. Gbsdpfxey Rziuo Almol This StitchLiner 5500 includes the following components: - 1x HOF-20 - 1x ACF-30 - 1x SPF-30 - 1x HTS-30 Key Features: - Variable data processing: Handles personalized prints and variable page counts, ideal for digital printing - Fully automatic format adjustment for quick job changes - Touchscreen for user-friendly operation, even for less experienced operators Specifications: - Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm - Paper weight: 40-350 gsm - Processing thickness: 8-200 pages (max. 5 mm spine thickness) - Production speed: Up to 5,500 booklets/hour - Stitch distance: 60-150 mm Technical Details: - Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm - Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm - Power supply: 400V / 50Hz - Space requirement: Min. 5,709 x 3,240 mm - Total weight: Approx. 2,500 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price

Condition: used, Year of construction: 2005, Horizon StitchLiner SL-5500 The Horizon StitchLiner 5500 is a powerful all-in-one solution for booklet production. It combines collating, creasing, folding, stitching, and three-knife trimming in a single, efficient process. With its user-friendly operation, high productivity, and versatility, this system offers numerous benefits for print shops, binders, and on-demand printing. This StitchLiner 5500 includes the following components: - 1x VAC-100a, 1x VAC-100m Collators - 1x ST-40 - 1x ACF-30 - 1x SPF-30 - 1x HTS-30 Key Features: - 20 stations - Inline production from collating to finished product - Variable data processing: Handles personalized prints and variable page counts, ideal for digital printing - Fully automatic format adjustment for quick job changes - Touchscreen for user-friendly operation, even for less experienced operators Specifications: - Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm - Paper weight: 40-350 gsm - Processing thickness: 8-200 pages (max. 5 mm spine thickness) - Production speed: Up to 5,500 booklets/hour - Stitch distance: 60-150 mm Technical Details: - Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm - Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm - Power supply: 400V / 50Hz - Space requirement: Min. 5,709 x 3,240 mm - Total weight: Approx. 2,500 kg Gedpoy Rzgmsfx Almjbl All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price

Condition: used, Year of construction: 2005, Horizon StitchLiner SL-5500 The Horizon StitchLiner 5500 is a powerful all-in-one solution for booklet production. It combines collating, creasing, folding, stitching, and three-knife trimming in a single, efficient process. With its user-friendly operation, high productivity, and versatility, this system offers numerous benefits for print shops, binders, and on-demand printing. This StitchLiner 5500 includes the following components: - 1x VAC-60Ha, 3x VAC-60Hm Collators - 1x BC-20 - 1x ACF-30 Gsdpfxey Rmx Ue Almobl - 1x SPF-30 - 1x HTS-30 Key Features: - 24 stations - Inline production from collating to finished product - Variable data processing: Handles personalized prints and variable page counts, ideal for digital printing - Fully automatic format adjustment for quick job changes - Touchscreen for user-friendly operation, even for less experienced operators Specifications: - Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm - Paper weight: 40-350 gsm - Processing thickness: 8-200 pages (max. 5 mm spine thickness) - Production speed: Up to 5,500 booklets/hour - Stitch distance: 60-150 mm Technical Details: - Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm - Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm - Power supply: 400V / 50Hz - Space requirement: Min. 5,709 x 3,240 mm - Total weight: Approx. 2,500 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price

Condition: used, Year of construction: 2012, Format: 500 x 350 mm Gbjdsyx Hu Espfx Almel Equipment: Accumulate & Folder ACF-30 (serial 381007) Stacker ST-40 (serial 409107) 3x Collator VAC-600Ha Three knife trimmer HTS-30S (serial 632003) Saddle stitcher SPF-30S (serial 632003)